药物头孢氨苄分子模板聚合物水中结合性质的研究

采用分子模板技术合成了以头孢氨苄为模板分子以三氟甲基丙烯酸和４－乙烯基吡啶同时为功能单体的分子模板聚合物。将得到的棒状聚合物研磨过筛后,运用平衡结合实验研究了头孢氨苄分子模板聚合物的结合性质,Ｓｃａｔｃｈａｒｄ分析表明,在所研究的浓度范围内,在聚合物中形成了两类不同的结合位点。头孢氨苄分子模板聚合物与其化学组成相同的非模板聚合物相比,有很高的结合容量。底物选择性实验表明,与其它结构相似的药物相比,     

农药丙溴磷分子印迹聚合物微球的制备与结合性能研究

采用分子印迹技术,以丙溴磷为模板分子,分别以α-甲基丙烯酸和丙烯酰胺为功能单体,在乙腈溶液中合成了2种对丙溴磷具有选择性结合能力的分子印迹聚合物.紫外光度法研究表明,模板分子丙溴磷与α-甲基丙烯酸之间的作用强于其与丙烯酰胺之间的作用;扫描电镜的研究则表明以α-甲基丙烯酸为功能单体合成的分子印迹聚合物呈微球形,粒径约为0.5 ～2 μm;利用平衡结合实验研究了不同功能单体制备的聚合物对模板分子的结合能力及其对底物的选择性,经Scatchard模型分析,求出了聚合物的最大表观结合量(Qmax)和平衡离解常数(Kd)分别为49.44 μmol/g 和1.05 mmol/L.研究表明以α-甲基丙烯酸为功能单体合成的分子印迹聚合物对丙溴磷表现出更强的结合能力和更高的选择性.     

烯唑醇分子印迹聚合物的合成及其吸附性能研究

以烯唑醇为模板分子,MAA为功能单体,EDMA为交联剂,采用本体聚合法合成分子印迹聚合物。考察了采用不同比例的模板分子与功能单体合成的聚合物对烯唑醇的吸附量,通过静态吸附试验研究了烯唑醇分子印迹聚合物对烯唑醇吸附性能的影响,并进行Scatchard分析。由Scatchard分析可知模板分子烯唑醇与功能单体MAA形成了1类结合位点,结合位点的离解常数KD=0.117mmol/L,最大表观结合量Qmax=38.66μmol/g。     

选择性富集分离虎杖中白藜芦醇苷的分子印迹聚合物的制备及分子识别性能研究

以白藜芦醇苷(POL)为模板分子,分别以丙烯酰胺(AM)、4-乙烯基吡啶(4-VP)、甲基丙烯酸羟乙酯(HEMA)、甲基丙烯酸(MAA)为功能单体,二甲基丙烯酸乙二醇酯(EGDMA)为交联剂,偶氮二异丁腈(AIBN)为引发剂,采用本体聚合法制备白藜芦醇苷分子印迹聚合物。采用静态平衡结合实验研究了印迹聚合物对模板分子及不同底物的识别性能。结果表明,以丙烯酰胺为功能单体的印迹聚合物(MIP1)对模板分子的识别性能最好,其次是以4-VP为功能单体的聚合物(MIP2),以HEMA为功能单体的聚合物(MIP3)以及以MAA为功能单体的聚合物(MIP4)的分子识别性能较差。表明功能单体与模板分子之间相互作用的强弱对MIP的识别能力有较大的影响。静态平衡结合法以及Scatchard分析法表明,MIP1对模板分子呈现较好的结合能力和选择性,该印迹聚合物中形成了2类不同的结合位点,离解常数分别为7.43×10-5、3.70×10-3mol/L。将MIP1用于虎杖提取物中POL的固相萃取分离,效果良好。     

药物氟哌酸分子模板聚合物的分子识别特性

采用分子印迹技术合成了对药物氟哌酸有高度选择性的模板聚合物。通过 Ｓｃａｔｃｈａｒｄ分析研究了模板聚合物的选择结合特性。结果表明,以甲基丙烯酸为功能单体的模 板聚合物通过离子作用和氢键作用可以形成两类结合位点。用多点结合模型计算两类不同 结合位点的离解常数分别为Ｋｄ１＝２．９×１０－５ｍｏｌ／Ｌ和Ｋ＝３．２×１０－３ｍｏｌ／Ｌ。结合底物的实 验表明,该聚合物对氟哌酸呈现出高的选择性,有明显的开发应用价值。     

莠去津分子印迹聚合物的合成及识别性能研究

以莠去津为模板分子,α-甲基丙烯酸为功能单体,在氯仿溶剂中合成了莠去津分子印迹聚合物．紫外光谱研究表明莠去津与功能单体α-甲基丙烯酸之间确实存在作用力,通过红外光谱分析了聚合物结构,可以确定模板分子与功能单体之间的作用力为氢键．利用透射电镜表征了溶剂用量对印迹聚合物微观形貌的影响,综合利用平衡结合实验考察了不同溶剂用量...     

炔雌醇类似物分子印迹聚合物的制备及性能研究

采用沉淀聚合法合成了以炔雌醇类似物17-乙基雌二醇为名义模板分子,甲基丙烯酸为功能单体,三羟甲基丙烷三甲基丙烯酸酯为交联剂的分子印迹聚合物微球。采用Gaussian 03计算机软件模拟了名义模板与功能单体的相互作用,优选功能单体及配比。利用透射电子显微镜观察了聚合物微球的形貌,通过静态平衡吸附试验研究了此聚合物对自身模板、炔雌醇及雌二醇的结合能力和选择性。结果表明印迹聚合物微球大小比较均匀,外形圆整,对炔雌醇及其类似物均表现出了较高的亲和性和特异性识别能力。     

以桑色素为模板的分子烙印聚合物的制备、结合特性及其在薄层色谱固定相方面的应用

以桑色素为模板,选用不同的功能单体和致孔剂制备了一系列分子烙印聚合物,采用结合实验考察了它们对底物的吸附特性,发现以丙烯酰胺为功能单体,以乙酸乙酯为致孔剂制得的烙印聚合物对底物有很好的选择性,同时对一些结构相似的化合物具有一定的结合力.Scatchard方程研究结果表明,在研究的浓度范围内聚合物形成了一类等价的结合位点,其平衡离解常数为0.877mmol/L,对模板分子的最大表观结合量为59.18μmol/g.可认为桑色素分子中3,7,4'位的羟基与功能单体的氢键作用是分子烙印聚合物具有底物选择性的主要因素.以该分子烙印聚合物为薄层色谱固定相,可以把模板分子从结构相似的化合物中分离出来,最小分离度为1.19.     

除草剂青莠定分子印迹聚合物的合成及结合性能研究

采用分子印迹技术,分别以α-甲基丙烯酸和4-乙烯基吡啶为功能单体,合成了两种对除草剂青莠定具有选择性结合能力的分子印迹聚合物．紫外光度法研究显示了模板分子青莠定和4-乙烯基吡啶的离子作用强于它和α-甲基丙烯酸之间的氢键作用,并用平衡结合实验研究了不同功能单体的聚合物对模板分子的结合能力和对底物的选择性,结果表明以4-乙烯基吡啶为功能单体合成的分子印迹聚合物对青莠定表现出更高的结合能力和更优的选择性．这对分子印迹技术用于环境样品中除草剂青莠定的分离和富集具有重要意义。     

金属配位模板聚合物的分子识别特性的研究

以Ｃｏ（Ⅱ）和敌鼠配合物为模板,４－乙烯吡啶为功能基单体,乙二醇二甲基丙烯酸酯为交联剂,采用分子印迹技术,合成了具有类似于金属螯合抗体结合位点的金属配位模板聚合物。系统研究了金属离子对模板聚合物靠拢性结构敌鼠的调节作用。     

Dichroism of absorption and polarization of phosphorescence of molecules of the closed form of nitrobenzospirothiopyran

The spectral-polarization characteristics of absorption and phosphorescence of molecules of the initial form of nitro-substituted indolinospirobenzothiopyran were studied in oriented polyethylene films and in solutions with different polarity. An oscillator model of the electron transitions responsible for the formation of absorption and luminescence spectra was suggested. It was established that the principal differences in the spectral and photophysical properties of the compound studied and its oxygen-containing analog are associated with the fact that the electronegativity of the S atom is lower than that of the O atom. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1143–1146, June, 1997.     

非那雄胺合成工艺改进

非那雄胺能抑制5α-还原酶的活性,明显降低二氢睾酮水平,是一种治疗良性前列腺增生的有效药品。该合成工艺以甾烯酮酸为原料,将其与氯化亚砜反应,无须分离即与叔丁胺反应得17β-酰胺化合物,再氧化开环,环合,氢化,脱氢合成了非那雄胺。经元素分析、IR、1HNMR、13CNMR、MS分析表征了其结构。该法无须使用昂贵的2,2-二吡啶二硫化物和剧毒药品苯亚硒酸酐,且以乙酸铵代替氨气,降低了对设备的要求和腐蚀,更适用于工业生产。     

Determination of heats of detonation and influence of components of composite explosives on heats of detonation of high explosives

The heats of detonation of 20 simple high explosives and explosive mixtures were determined by means of an adiabatic detonation calorimeter designed by the authors. The results indicated that the performance of the instrument was reliable and the experimental data were very accurate. For explosive mixtures, there was a linear accumulative relationship between the heats of detonation of the explosive mixture and its components. Accordingly, the heats of detonation of explosive mixtures could be calculated directly from the heats of detonation of simple explosives and the characteristic heats of other components. The experiments showed that the gold or brass shell of the cylindrical charge could be substituted by a thick-walled porcelain shell, which had the advantage of cheapness.

     

Synthesis of phenolic components of Grains of Paradise

Two vanilloids, (5E)-8-(4-hydroxy-3-methoxyphenyl)oct-5-en-4-one (1) and 4-[3-hydroxydecyl]-2-methoxyphenol (2), isolated from the dried seeds of Grains of Paradise (Aframomum melegueta), were synthesized; the latter compound was made as the S-enantiomer and the material derived from the seeds was found to be a 1:1.7 mixture of the R and S isomers. The synthetic route used should allow the preparation of analogs having extended alkyl chains and consequently different lipophilicity, and 3, a homolog of 2, was also prepared.     

恶臭嗅辨实验室建设探讨

针对恶臭测试的环境影响问题,提出了解决的实例方案,并对方案的要点及优缺点进行讨论,此方案在实际操作中具有较好的效果。     

氯氧化镁生成热的研究

用氧化镁氯化镁水溶液制备了8水合氯氧化镁[nMg(OH)2·MgCl2·8H2O], 并测定了其在盐酸中的溶解热, 实验结果表明, 氯氧化镁溶解热与n值呈线性关系, 根据溶解热求出5Mg(OH)2·MgCl2·8H2O和3Mg(OH)2·MgCl2·8H2O的生成热分别为-7727.1和5888.1kJ·mol^1^-。     

Summary of development of the theory of stability of colloids and thin films

In this review, the research of the author in the field of colloidal systems is summarized. The factors influencing colloidal stability are systematized and analyzed. Examples are presented to illustrate the practical utilization of the theory of stability of colloids and thin films.This review was prepared on the basis of the works of the author, which were awarded the State Premium for 1991 in the field of science and technology, chemistry section.Institute of Physical Chemistry, Russian Academy of Sciences, 117915 Moscow. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 8, pp. 1708–1717, August, 1992.     

Study of hydration of two cements of different strengths

Main hydration products of two cement pastes, i.e. CSH-gel, portlandite (P) (and specific surface S) were studied by static heating, and by SEM, TEM and XRD, as a function of cement strength (C-33 and C-43) hydration time (th) and subsequent hydration in water vapour.Total change in mass on hydration and air drying, M_o, increased with strength of cement paste and with hydration time. Content of water escaping at 110 to 220°C, defined as water bound with low energy, mainly interlayer and hydrate water, was independent on cement strength but its content increased with (th). Content of chemically bound (zeolitic) water in CSH-gel, escaping at 220-400°C, was slightly dependent on strength and increased with (th). It was possibly derived from the dehydroxylation of CSH-gel and AFm phase. Portlandite water, escaping at 400-500°C, was independent on cement strength and was higher on longer hydration. Large P crystals were formed in the weaker cement paste C-33. Smaller crystals were formed in C-43 but they increased with (th). Carbonate formated on contact with air (calcite, vaterite and aragonite), decomposed in cement at 600-700^oC. It was high in pastes C-33(1 month) and C-43(1 month), i.e. 5.7 and 3.3%, respectively; it was less than 1% after 6 hydration months (low sensitivity to carbonation) in agreement with the XRD study showing carbonates in the air dry paste (1month), and its absence on prolonged hydration (6 months) and on acetone treatment. Water vapour treatment of (6 months) pastes or wetting-drying increased this sensitivity.Nanosized P-crystals, detected by TEM, could contribute to the cement strength; carbonate was observed on the rims of gel clusters.This revised version was published online in November 2005 with corrections to the Cover Date.     

解决能源问题的新途径--光解水制氢的研究

面对日益枯竭的能源危机,氢能是一种洁净、最有前景的替代能源。目前在各种制氢的方法中光催化分解水制氢的研究最多,光解水过程中催化剂最关键,本文对利用太阳能光解水的途径、提高光催化反应效率以及光催化剂的开发研究进行了综述。