Synthesis and characterization of benzyl and benzoyl substituted oxime-phosphazenes

Two oxime-cyclophosphazenes were prepared from hexakis(4-formylphenoxy)cyclotriphosphazene (2) and hexakis(4-acetylphenoxy)cyclotriphosphazene (7). The reactions of these oximes with benzyl chloride, benzenesulfanoyl chloride, benzoyl chloride, 4-methoxybenzoyl chloride and 2-chlorobenzoyl chloride were studied. Hexa and pentasubstituted compounds were obtained from the reaction of hexakis(4-[(hydroxyimino)methyl]phenoxy)cyclotriphosphazene (3) with benzyl chloride (4) and benzoyl chloride, respectively. However, the oxime groups on 3 rearranged to nitrile (5) in the reaction of 3 with benzenesulfanoyl chloride and 1-napthalenesulfanoyl chloride. Hexasubstituted compounds were also obtained from the reactions of hexakis(4-[(1)-N-hydroxyethaneimidoyl]phenoxy)cyclotriphosphazene (8) with benzoyl chloride (10), 4-methoxybenzoyl chloride (11) and 2-chlorobenzoyl chloride (12). A trisubstituted compound was obtained from the reaction of 8 with benzyl chloride (9). All the products were generally obtained in high yields. Pure and defined products could not be obtained from the reaction of 3 with 4-methoxybenzoyl chloride and 2-chlorobenzoyl chloride. The structures of the compounds were defined by elemental analysis, IR, ¹H, ¹³C and ³¹P NMR spectroscopy.     

Radiation Chemical Studies of Protein Reactions: Effect of Alkaline-Earth Metals on the Breaking of Secondary Bonding in Protein

The radiation protective effect of the breaking of secondary bonding in protein was examined with alkaline-earth metals such as magnesium chloride, calcium chloride, strontium nitrate, and barium chloride, and alkaline metals and heavy metals such as lithium chloride, sodium chloride, potasium nitrate, ferrous chloride, ferric sulfate, nickel sulfate, aluminum nitrate, and zinc sulfate. An empirical equation for the viscosity change was obtained.     

有机溶剂法无水氯化镁的制备与表征

Ammonium carnallite was synthesized by hydrated magnesium chloride in salt lake and ammonium chloride solution. Dehydrated ammonium carnallite was dissolved in methanol under low temperature by feeding ammonia, to prepare anhydrous magnesium chloride. The results show that anhydrous magnesium chloride contains magnesium oxide in an amount less than 0.1% by weight, the yield of magnesium chloride was above 99.5%. Ammonium carnallite, ammoniation magnesium chloride and anhydrous magnesium chloride were characterized by thermoanalysis, X-ray powder diffraction and scanning electron microscopy.     

Gel Chromatographic Behavior of Inorganic Linear and Cyclic Phosphates: Influences of Eluting Agents

Abstract

Inorganic phosphates were chromatographed on a Sephadex G-25 column using lithium chloride, sodium chloride, potassium chloride, rubidium chloride, cesium chloride and tetramethylammonium chloride as an eluting agent at pH 10. When tetramethylammonium chloride was used the distribution coefficient of a linear phosphate was apparently smaller than that of the cyclic phosphate which has the same number of phosphorus atoms in its molecule. It was concluded that gel chromatographic behavior of phosphate species is greatly influenced by the nature of counter ions in an eluent.     

海藻酸-磷脂微囊复合水凝胶的制备、表征及毒理学分析

采用薄膜分散法合成磷脂微囊,根据胶粒的双电层理论,通过在微囊中加入氯化锰、氯化钙和氯化镁电解质溶液,使微囊处于相对稳定的状态.研究发现加入氯化锰和氯化钙溶液,微囊胶体的粒径没有明显的变化,但加入一定浓度氯化镁溶液,其粒径明显变大.为了进一步增加磷脂微囊稳定性,将氯化锰、氯化钙、氯化镁磷脂微囊胶体分别与海藻酸钠(SA)溶液混合.结果表明,氯化镁与SA几乎不能形成水凝胶,氯化钙与SA形成水凝胶能力强于氯化锰.微囊胶体溶液中的磷脂酰丝氨酸(PS)可以与Ca~(2+)和Mg~(2+)键合形成PS-Ca~(2+)和PS-Mg~(2+),但不能与Mn~(2+)键合形成PS-Mn~(2+).对氯化钙磷脂微囊与海藻酸钠合成的复合水凝胶的形貌、溶胀率及细胞毒性进行了表征,结果表明,氯化钙与SA形成的水凝胶可以捕获胶体中磷脂微囊,且形貌规整,结构稳定,无细胞毒性.     

稀土氯化物催化作用下纳米氢化钠对芳基卤化物的还原脱卤

稀土氯化物催化作用下纳米氢化钠对芳基卤化物的还原脱卤＊张源魁廖世健＊＊徐筠余道容（中国科学院大连化学物理研究所，大连１１６０２３）沈琪（苏州大学化学化工学院，苏州２１５００６）关键词催化还原脱卤，稀土氯化物，氢化钠，双金属协同效应有机卤化物的还原脱卤...     

Reaction of poly(vinyl chloride) with magnesium and grignard reagents

Reaction of poly(vinyl chloride) with magnesium under various conditions was attempted, but poly(vinyl chloride) did not react with magnesium. The reactions of poly(vinyl chloride) with benzylmagnesium chloride and allylmagnesium chloride as Grignard reagents were carried out in tetrahydrofuran at reflux temperature. It was found that the chlorine atoms in the poly(vinyl chloride) were replaced by benzyl and allyl groups by the coupling reaction, and a small amount of Grignard reagent of poly(vinyl chloride) was formed by the magnesium–halogen exchange reaction. The extent of the substitution increased with increasing reaction time and concentration of the Grignard reagent.     

Isopiestic Study of Water + Mannitol(sat) + Sodium Chloride + Ammonium Chloride + Barium Chloride at <Emphasis Type="Italic">T</Emphasis> = 298.15 K and Comparison with the Ideal-Like Solution Model

Isopiestic measurements have been carried out at the temperature 298.15 K for the quinary system (water + mannitol(sat) + sodium chloride + ammonium chloride + barium chloride) saturated with mannitol and its ternary sub-systems (water + mannitol(sat) + sodium chloride), (water + mannitol(sat) + ammonium chloride) and (water + mannitol(sat) + barium chloride). Taking aqueous sodium chloride as reference solutions, osmotic coefficients of the other aqueous solutions were determined. The experimental results show that the isopiestic activities of the quinary system in relation to its ternary sub-systems are in excellent agreement with the ideal-like solution model.     

气相色谱与原子吸收联用及其在有机锡化合物形态分析中的应用

本文研究适合于有机锡化合物形态分析的气色谱－原子吸收联用技术的接口。在优化、改进的分离测定条件下，成功地实现了一甲基锡、二甲基锡、三甲基锡、一丁基锡、二丁基锡、三丁基锡、四丁基锡化合物的分离，并以内标法测定了湖、海水、工业废水等水样中的丁基锡化合物。     

Enhancement effect of iron addition for the decomposition of organic mercury as studied by continuous flow analysis with cold vapor atomic absorption spectrometric detection

Summary A continuous flow analysis is described for the determination of total mercury by cold vapor atomic absorption spectrometry. Organic mercury compounds such as methylmercury(II) chloride, ethylmercury(II) chloride and phenylmercury(II) chloride were decomposed by potassium peroxodisulphate with addition of ferric chloride as catalytic reagent. The reducing reagent used was tin(II) chloride in sodium hydroxide solution. With 1,000 mg Fe/l added in the decomposition process, we found that methylmercury(II) chloride and ethylmercury(II) chloride gave response signals similar to those of mercury(II) chloride. The proposed method was applied to the analysis of total mercury in waste water. Permanent address: Department of Chemistry, Faculty of Mathematics and Natural Sciences, Andalas University, Padang, West Sumatra, Indonesia     

二芳基汞的合成

将氯化重氮苯的溶液加入氯化汞、维生素C、丙酮和少量氯化铜的混合物中,得到80％的氯化苯汞;如在反应混合物中补加维生素C、氯化铜和浓氨水,则得到二苯汞。用同样的方法制备了其他的二芳基汞,并讨论了反应可能的机理。     

Copolymers of vinyl and vinylidene chlorides with alkyl acrylates

High-molecular-weight copolymers of vinyl chloride and ethyl or butyl acrylate were prepared in high conversion and yield in the presence of boron trifluoride as the acrylate ester complexing agent. When the vinyl chloride monomer is in excess of equimolar amounts, the resulting copolymers are alternating; and when the alkyl acrylates are in excess, acrylate-rich copolymers are obtained. Ethylene–vinyl chloride–ethyl acrylate and propylene–vinyl chloride–ethyl acrylate terpolymers were also obtained with an ethyl acrylate content of 50 mole %. The relative reactivities of propylene, vinyl chloride, and ethylene in these polymerizations were 5.4, 3.8, and 1.0, respectively. Vinylidene chloride–ethyl acrylate copolymers that are nearly alternating and rich in acrylate or in vinylidene chloride have also been prepared. The monomer reactivity ratios for vinylidene chloride and ethyl acrylate in the presence of boron trifluoride are considerably lower than in its absence.     

Reversed‐Phase High‐Performance Liquid Chromatography with Electrochemical Detection of Anthocyanins

Abstract

Anthocyanins, flavonoid compounds present in grapes and wines, were determined by reverse‐phase high‐performance liquid chromatography (RP‐HPLC) with electrochemical detection (RP‐HPLC‐ED). The method developed consists of RP‐HPLC gradient elution with voltammetric detection using a glassy carbon electrode after separation in an Inertsil ODS‐3V analytical column. Good peak resolution was obtained following direct injection of a 50 µL sample of anthocyanins in a mobile phase of pH 2.20. The results show that six different anthocyanins: cyanidin‐3‐O‐glucoside chloride (kuromanin chloride), cyanidin‐3,5‐di‐O‐glucoside chloride (cyanin chloride), malvidin‐3‐O‐glucoside chloride (oenin chloride), malvidin‐3,5‐di‐O‐glucoside chloride (malvin chloride), delphinidin‐3‐O‐glucoside chloride (myrtillin chloride), and peonidine‐3‐O‐glucoside chloride, all with antioxidant properties, can be separated in a single run by direct injection of solution. The limit of detection (LOD) for these compounds was lower than 0.3 µM. The method can also be applied to the analysis of these compounds in red wines and in skins and pulp extracts of red grapes, since all these antioxidants are electroactive.     

A method for removal of chloride interference in determination of aluminium by atomic-absorption spectrometry with a graphite furnace

Methods for removal of the chloride interferences in determination of aluminium by atomic-absorption spectrometry with a graphite furnace have been investigated. Two mechanisms of chloride interference have been established. The first arises from co-ordination of the chloride to aluminium. This interference can be removed by preventing the co-ordination. The other is due to co-existing chloride salts remaining until the atomization step. This interference can be removed by volatilizing the chloride or by converting it and/or aluminium chloride into another substance such as the oxides before the atomization step. The tetra-ammonium salt of EDTA is very suitable as an additive to overcome chloride interference because of its ability to co-ordinate aluminium and other cations, and also its effect when heated.     

The synthesis of chiral dimethyl substituted macrocyclic polyether-diester ligands

A new series of chiral macrocyclic polyether-diester ligands has been prepared from four chiral dimethyl substituted tetraethylene glycols ( 15a,b,16,17 ) and 2,6-pyridinedicarbonyl chloride (products 5a-7 ), diglycolyl chloride (products 8–10 ), thiadiglycolyl chloride (product 11 ), 2,5-furandicarbonyl chloride (product 12 ), 4-chloro-2,6-pyridinedicarbonyl chloride (product 13 ), and 4-methoxy-2,6-pyridinedicarbonyl chloride (product 14 ). The chiral dimethyl substituted tetraethylene glycols ( 15a-17 ) were prepared from ethyl (S)-lactate.     

偏氯乙烯悬浮聚合反应速率模型

通过实验研究了偏氯乙烯悬浮聚合反应动力学,比较了偏氯乙烯与氯乙烯聚合动力学行为的异同.在假定偏氯乙烯聚合反应发生在单体相和液固界面两个区域的基础上,提出了偏氯乙烯沉淀聚合反应速率模型.模型预测的转化率值几乎在全转化率范围内都与本文的偏氯乙烯悬浮聚合实验结果一致.     

Sur une transformation inhabituelle de nitro-2 benzofurannes dans les conditions de la reaction de friedel et crafts

On treatment with acetyl chloride or acetic anhydride in presence of aluminium chloride in methylene chloride. 2-nitro and 5-chloro 2-nitro benzofurans yield 2,3-dichloro benzofurans, 3-chloro 2-coumaranones and 2-acetoximino 3-chloro coumarans. By the action of acetyl chloride, in presence of titanium (IV) chloride in methylene chloride, on 2-nitro benzofuran, 2,3-dichloro benzofuran can be obtained with a fairly good yield beside a relatively restricted quantity of 3-chloro 2-coumaranone. In the same conditions, 5-chloro-2-nitro benzofuran yields not only 2,3,5-trichloro benzofuran but also 2,2,3,3,5-pentachloro coumaran and, occasionally. 3,5-dichloro 2-coumaranone.     

氢化铝锂新合成方法的研究

在略高溫度下,通过氯化锂和金属钠在氫气氛中的反应,得到了氢化锂和氯化钠的混合物。用通常的Schlesinger法将得到的混合物用于合成氢化铝锂。反应的副产物是氯化锂和氯化钠的混合物,可用不同方法将其分离,所得氯化锂用于再循环。     

Synthesis of Trimethylsilylpropynoyl Chloride

Trimethylsilylpropynoic acid reacts with thionyl chloride to give a mixture of trimethylsilylpropynoyl chloride and 3-chloro-3-trimethylsilyl-2-propenoyl chloride whose ratio depends on the reaction conditions (temperature, reactant ratio). Dimethylformamide almost does not catalyze the reaction. Treatment of trimethylsilylpropynoic acid with oxalyl chloride in the presence of 0.04 equiv of DMF at room temperature ensures selective formation of trimethylsilylpropynoyl chloride (yield 80%).     

Low-temperature ashing of organic materials for determination of chloride

The low-temperature plasma ashing technique was applied to organic materials containing sodium chloride and residual ash was analyzed for chloride using ion chromatography. Recovery of the chloride was approximately 50%, while 20–30% of the chloride had been converted to chlorate. The remaining fraction of the chloride could have been volatilized due to electron and ion bombardments onto the sample surface within the glow discharge region. Pretreatment of the sample by impregnating with potassium carbonate improved the recovery of the chloride to 90% with practically no production of chlorate.