Entropic nature of the adsorption of sodium dodecylbenzenesulfonate on nanoparticles of aluminum and iron oxides in aqueous medium

The adsorption of anionic surfactant sodium dodecylbenzenesulfonate (SDBS) from aqueous solution on the hydrophilic surfaces of aluminum oxide and iron oxide nanoparticles is studied via UV spectrophotometry, electrophoretic light scattering, and isothermal microcalorimetry. It is shown that the isotherms of the adsorption of SDBS on the surfaces of both oxides in the area of concentrations up to 0.6 mmol/L is linear. It is found that the positive zeta potential of the surfaces of the particles falls to zero and shifts toward the range of negative values due to adsorption. The adsorption of SDBS is characterized by positive enthalpy values over the investigated range of concentrations, while the loss of energy during adsorption indicates it is of an entropic nature. It is concluded that the probable cause of the increase in entropy is the dehydration of SDBS molecules during on surface adsorption. The obtained results are discussed in terms of the formation of hemimicelles of surfactant on the hydrophilic surfaces of metal oxide nanoparticles in an aqueous medium.     

一锅法合成介孔材料Fe-SBA-15及其对Friedel-Crafts苄基化反应的催化性能

采用尿素作为pH值自调节剂,一锅法合成了Fe-SBA-15催化剂.X射线衍射和N2吸附-脱附等温线结果表明,Fe-SBA-15具有与SBA-15相似的介孔结构.紫外-可见光谱结果表明,Fe-SBA-15样品在550℃焙烧后Fe元素主要以四配位形式存在.活性测试结果表明,Fe-SBA-15对苯及其衍生物的Friedel-Crafts苄基化反应具有优异的催化性能.例如,在反应温度为70℃和苯/苄基氯摩尔比为14.4的条件下,催化剂上苄基氯完全转化所需的时间为20~70min,二苯甲烷的选择性为97.8%~100%.随着反应温度的升高和Fe含量的增加,苄基氯的转化率逐渐升高;随着苯/苄基氯比的减小,苄基氯完全转化所需的时间逐渐延长.     

Effect of the nature of the iron salt on the hydrothermal modification of ferrosilica gel

The effect of iron(III) salts (chloride or nitrate) on the hydrothermal modification of the texture and phase composition of ferrosilica gel has been studied. Special features in the crystallization of prepared specimens as a function of the nature of the anion of the initial iron salt have been revealed by x-ray phase analysis and nuclear gamma-resonance spectroscopy.Translated from Teoreticheskaya i Éksperimental'naya Khimiya, Vol. 24, No. 2, pp. 251–253, March–April 1988.     

Effect of nature of templates on formation mechanism of aluminum oxide mesoporous structure

Mesoporous aluminum oxide is produced by the sol-gel method from aluminum isopropoxide using molecular structures of a cationic polyelectrolyte (polyethylenimine) and dodecylamine micelles as nanotemplates. The mechanism for the formation of mesophases of hybrid materials in colloidal systems upon template synthesis is discussed.     

Effect of pH on the aluminum salts hydrolysis during coagulation process: formation and decomposition of polymeric aluminum species

Effect of pH on the aluminum chloride hydrolysis at low concentration was investigated in detail by electrospray ionization (ESI) mass spectrometry. In particular, formation and decomposition processes of polymeric aluminum species were discussed. When coagulant AlCl(3) was diluted to normal coagulant dose (1.5 x 10(-4) mol/L), hydrolysis occurred immediately. Monomeric and dimeric aluminum species were the main products at pH 4.0. With pH increasing, hydrolysis and polymerization processes were accelerated. Monomeric and dimeric aluminum species hydrolyzed and polymerized into small polymeric aluminum species (Al(3)-Al(5) species) at pH 4.8. Through aggregation and self-assembly, the small polymeric aluminum species polymerized into median polymeric species (Al(6)-Al(10) species) at pH 5.0. In the same way, small and median polymeric aluminum species further aggregated into large polymeric species (Al(11)-Al(21) species). When pH was up to 5.8, metastable median and large polymers species decomposed into small aluminum species, then further disaggregated into dimeric species. With pH increased to 6.4, majority of aluminum species formed to Al(OH)(3) amorphous flocs. Accordingly, coagulant hydrolysis mechanism from polymerization toward decomposition was proposed. Furthermore, formation and decomposition of polymeric aluminum species in AlCl(3) solution followed the "Core-links" model, while those of Keggin-Al(13) species in polyaluminum solution was based on the "Cage-like" model.     

Effect of solvent nature on the reaction of metallic iron with benzoic acid in a bead mill

Results of an experimental study of the influence exerted by the solvent nature on the reaction rate, achieved degree of acid expenditure, selectivity with respect to salts of iron(II) and (III), and phase state of the reaction mixture in a single-stage reaction of iron with benzoic acid and atmospheric oxygen in the presence of a stimulating iodine additive are presented.     

On the chemical nature of iodinating species

This review was presented as a plenary lecture at the International Symposium on Radioiodines. The chemical nature of iodinating species are reviewed with emphasis on biological iodinations and goitrogens.     

Volume properties of the hydrolyzed aluminum species

The composition of polynuclear aluminum hydroxo complexes, their hydrolysis constants, and the volume changes due to complex formation have been determined by CPESSP software analysis of the potentiometry and dilatometry data.     

Spectrophotometric determination of aluminum and iron in calcium

A simple, rapid, and accurate method is described whereby micro amounts of aluminum and iron can be determined in calcium metal. The iron is determined spectrophotometrically by measuring the absorbency of the reddish-orange color of the tris(1,10-phenanthroline)iron(II)ion, [(C₁₂H₈N₂)₃Fe]⁺⁺. This complex effectively removes the iron interference, and the aluminum is determined spectrophotometrically in the solution remaining from the iron determination by extracting it with a chloroform solution of 8-quinolinol and measuring the absorbency of the yellow color of the tris(8-quinolinolo)aluminum(III) in the chloroform solution.     

Effect of aluminum modification on catalytic properties of PtSn-based catalysts supported on SBA-15 for propane dehydrogenation

The catalytic properties of PtSn-based catalysts supported on siliceous SBA-15 and Al-modified SBA-15, such as Al-incorporated SBA-15 (AlSBA-15) and alumina-modified SBA-15 (Al2O3/SBA-15), for propane dehydrogenation were investigated. Al2O3/SBA-15 was prepared either by an impregnation method using aluminum nitrate aqueous solution, or by the treatment of SBA-15 with a Al(OC3H7)3 solution in anhydrous toluene. N2-physisorption, FT-IR spectroscopy, solid-state 27Al MAS NMR spectroscopy, hydrogen chemisorption, XRF, NH3 temperature-programmed desorption, X-ray photoelectron spectroscopy and TPO were used to characterize these samples. Among these catalysts, the PtSn-based catalyst supported on Al2O3/SBA-15, which was grafted with Al(OC3H7)3, exhibited the best catalytic performance in terms of activity and stability The possible reason was due to the high Pt metal dispersion and/or the strong interactions among Pt, Sn, and the support.     

Anionic ligand effect on the nature of epoxidizing intermediates in iron porphyrin complex-catalyzed epoxidation reactions

We have studied an anionic ligand effect in iron porphyrin complex-catalyzed competitive epoxidations of cis- and trans-stilbenes by various terminal oxidants and found that the ratios of cis- to trans-stilbene oxide products formed in competitive epoxidations were markedly dependent on the ligating nature of the anionic ligands. The ratios of cis- to trans-stilbene oxides obtained in the reactions of Fe(TPP)X (TPP = meso-tetraphenylporphinato dianion and X(-) = anionic ligand) and iodosylbenzene (PhIO) were 14 and 0.9 when the X(-) of Fe(TPP)X was Cl(-) and CF(3)SO(3)(-), respectively. An anionic ligand effect was also observed in the reactions of an electron-deficient iron(III) porphyrin complex containing a number of different anionic ligands, Fe(TPFPP)X [TPFPP = meso-tetrakis(pentafluorophenyl)porphinato dianion and X(-) = anionic ligand], and various terminal oxidants such as PhIO, m-chloroperoxybenzoic acid (m-CPBA), tetrabutylammonium oxone (TBAO), and H(2)O(2). While high ratios of cis- to trans-stilbene oxides were obtained in the reactions of iron porphyrin catalysts containing ligating anionic ligands such as Cl(-) and OAc(-), the ratios of cis- to trans-stilbene oxide were low in the reactions of iron porphyrin complexes containing nonligating or weakly ligating anionic ligands such as SbF(6)(-), CF(3)SO(3)(-), and ClO(4)(-). When the anionic ligand was NO(3)(-), the product ratios were found to depend on terminal oxidants and olefin concentrations. We suggest that the dependence of the product ratios on the anionic ligands of iron(III) porphyrin catalysts is due to the involvement of different reactive species in olefin epoxidation reactions. That is, high-valent iron(IV) oxo porphyrin cation radicals are generated as a reactive species in the reactions of iron porphyrin catalysts containing nonligating or weakly ligating anionic ligands such as SbF(6)(-), CF(3)SO(3)(-), and ClO(4)(-), whereas oxidant-iron(III) porphyrin complexes are the reactive intermediates in the reactions of iron porphyrin catalysts containing ligating anionic ligands such as Cl(-) and OAc(-).     

Revelation of the nature of the reducing species in titanocene halide-promoted reductions

The fundamental nature of Ti(III) complexes generated in tetrahydrofuran by reduction of Cp(2)TiCl(2) has been clarified by means of cyclic voltammetry and kinetic measurements. While the electrochemical reduction of Cp(2)TiCl(2) leads to the formation of Cp(2)TiCl(2)(-), the use of metals such as Zn, Al, or Mn as reductants affords Cp(2)TiCl and (Cp(2)TiCl)(2) in a mixture having a dimerization equilibrium constant of 3 x 10(3) M(-)(1), independent of the metal used. Thus, we find it unlikely that the trinuclear complexes or ionic clusters known from the solid phase should be present in solution as previously suggested. The standard potentials determined for the redox couples Cp(2)TiCl(2)/Cp(2)TiCl(2)(-), (Cp(2)TiCl)(2)(+)/(Cp(2)TiCl)(2), Cp(2)TiCl(+)/Cp(2)TiCl, and Cp(2)Ti(2+)/Cp(2)Ti(+) increase in the order listed. However, the reactivity of the different Ti(III) complexes is assessed as (Cp(2)TiCl)(2) greater, similar Cp(2)TiCl approximately Cp(2)Ti(+) > Cp(2)TiCl(2)(-) in their reactions with benzyl chloride and benzaldehyde. None of the reactions proceed by an outer-sphere electron transfer pathway, and clearly the inner-sphere character is much higher in the case of Cp(2)Ti(+) than for (Cp(2)TiCl)(2), Cp(2)TiCl, and in particular Cp(2)TiCl(2)(-). As to the electron acceptor, the inner-sphere character increases, going from benzyl chloride to benzaldehyde, and it is suggested that the chlorine atom in benzyl chloride and the oxygen atom in benzaldehyde may function as bridges between the reactants in the transition state.     

Separation of aluminum from iron with thioglycolic acid

Precipitation of aluminum by ammonia in the presence of thioglycolic acid provides an accurate method for the determination of aluminum in the presence of moderate amounts of iron (up to 0.25 g Fe2O3) and manganese. Titanium and phosphorus are quantitatively precipitated under the conditions, and aluminum can thus be determined by difference when they are present.     

The nature of active species in catalytic systems based on non-heme iron complexes, hydrogen peroxide, and acetic acid for selective olefin epoxidation

The catalytic systems [(BPMEN)Fe^II(CH₃CN)₂](ClO₄)₂/H₂O₂/CH₃OOH and [(TPA)Fe^II(CH₃CN)₂](ClO₄)₂/H₂O₂/CH₃OOH, where BPMEN = N,N′-dimethyl-N,N′-bis(2-pyridylmethyl)-1,2-diaminoethane and TPA = tris(2-pyridylmethyl)amine, provide selective olefin epoxidation. Proton NMR studies showed that the mononuclear iron(IV) oxo complexes [(L)Fe^IV=O]²⁺, with L = BPMEN or TPA, are present in the cited catalytic systems. These intermediates are the decomposition products of the acylperoxo complexes [(L)Fe^III-O₃CCH₃]²⁺. Such a complex was observed by the ²H NMR technique at low temperatures. The [(L)Fe^IV=O]²⁺ and [(L)Fe^V=O]³⁺ oxo complexes are possible active species in the studied catalytic systems.     

Dependence of copper species on the nature of the support for dispersed CuO catalysts

Copper catalysts prepared by chemisorption-hydrolysis technique over silica (Cu/Si) and silica-alumina (Cu/SiAl) supports were studied to understand the role of the support on the nature and surface properties of the copper species stabilized on their surfaces. The morphological and surface properties of the copper phases have been characterized by complementary techniques, such as HRTEM, EXAFS-XANES, EPR, XPS, and FTIR. For the FTIR investigation, molecular probes (CO and NO) were also adsorbed on the surfaces to test the reactivity of the copper species. Moreover, the catalytic performances of the two catalysts have been compared in the HC-SCR reaction (NO reduction by C(2)H(4)) performed in highly oxidant conditions. The superior activity and selectivity of the supported silica-alumina catalyst with respect to that supported on silica could be related with the different nature of the copper species stabilized on the two supports, as emerged from the results obtained from the spectroscopic investigations. Small and well-dispersed CuO particles were present on silica, whereas isolated copper ions predominated on silica-alumina, likely in regions rich in alumina that made some exchangeable sites available, as indicated by FTIR spectra of adsorbed CO. The less positive global charge of copper species on Cu/SiAl than in Cu/Si has been confirmed by EPR, XPS, and EXAFS-XANES analyses.     

Studies on the nature of the reactions and species involved in potentiometric titrimetric determination of uranium

The species and reactions involved in the determination of uranium by the Davies and Gray method have been investigated through the behaviour of the various species when present alone or in various combinations in the reaction medium. The studies indicate the formation of Fe(II) and V(III) in the titration system. These two species appear easily prone to oxidation by the titration medium. Probable reasons for the negative bias found when the titration is not completed in the stipulated time period, and for the sharpening of the end-point by the presence of vanadium(IV), are discussed.     

On the nature of active species in cationic ring-opening polymerization of cyclodimethylsiloxanes

Contrarily to cationic ring-opening polymerization of cyclic ethers and of some other cyclic monomers, for which direct identification of the various types of active centres has been made in a few cases, the nature of the species active in the polymerization of cyclo-dimethylsiloxanes is not yet known. However, some provisional conclusions about the possible mechanisms may be deduced from the wide variation in the types of products and in the kinetics observed according to either the size of the cyclic monomer (D₃, D₄, D₅, D₆) and to the type of initiation (chemically, or radiation induced). For polymerizations with either protonic or non-protonic initiators, made in CH₂Cl₂ near room temperature, the smaller cycle D₃ behaves quite differently from D₄, D₅ and D₆. D₃ is more reactive in both homo- and copolymerizations. It gives small cycles of other types and the effect of water on the reaction may be quite different. A discussion of the data leads to the conclusion that polymer growth for most cyclosiloxanes involves activated esters, while it may occur for D₃ on different sites such as oxonium or silanol groups. Polymerization of D₃, D₄ and D₅ initiated in bulk at 90°C by high energy radiation, in high purity conditions, has also been shown to be cationic but the active centres concentration is much lower, and the propagation rate constants much higher, than in chemically initiated polymerizations. The global rates, the monomer reactivities in copolymerization and the types of cycles are similar for D₃, D₄ and D₅, which is attributed to propagation occurring on very reactive silicenium ions, either free or in the same solvation state.