Stereochemistry of the [4 + 2] cycloadditions of trans,trans- and cis,trans-2,4-hexadiene to C(60)

The [4 + 2] cycloaddition of trans,trans-2,4-hexadiene with C(60) proceeds via a concerted mechanism with retention of stereochemistry in the cycloadduct 1a. However, when cis,trans-2,4-hexadiene reacts with C(60), isomerization of the cis,trans to the thermodynamically more stable trans,trans isomer occurs. Subsequently, the cis,trans diene isomerized to the trans,trans isomer and cycloadds to C(60), to form adduct 1a. When the reaction is carried out at higher temperatures, the formation of cycloadduct 1b is also obtained. This result is consistent with a concerted cycloaddition of cis,trans-2,4-hexadiene with C(60), which is more reactive at elevated temperatures and leads to the formation of the Diels-Alder adduct 1b.     

C60与甲基醚CH3OCnH2n+1的气相离子分子反应研究

自宏观量合成和分离C₆₀以来,人们不断地合成各种功能化的C₆₀衍生物.在对C₆₀化学性质的认识过程中,气相离子化学一直起着十分重要的作用。     

光盘用2P胶应用研究进展

对光盘用２Ｐ胶的应用研究进展情况进行了评述，其中光盘制备用光聚合浮雕成型２Ｐ胶的基本组成为各类多官能团丙烯酸酯类单体；光盘保护涂层用２Ｐ胶主要组分为环氧丙烯酸酯类预聚体。     

Synthesis of highly water soluble C60 end‐capped vinyl ether oligomers with well‐defined structure

Highly water soluble [60]fullerene (C₆₀) end‐capped vinyl ether (VE) oligomers with well‐defined structure were synthesized by living cationic polymerization technique. The addition reaction between 1‐octynylfulleride anion and oligomeric cationic species of VEs with pendant acetoxyl or malonic ester functions afforded the precursor C₆₀ end‐capped oligomers. The living VE oligomers were prepared by living cationic polymerization of diethyl 2‐(vinyloxy)ethylmalonate (VOEM) and 2‐acetoxyethyl vinyl ether (AcOVE) by the CH₃CH(OR)Cl/ZnI₂ [R = CH₂CH₂OCOCH₃ and CH₂CH₂CH(COOEt)₂, respectively] initiating system. The precursors were obtained as dark brown gummy solid in 33 and 72% yield for AcOVE and VOEM, respectively. UV‐vis and ¹³C NMR spectroscopy indicated the formation of 1,2‐disubstituted dihydrofullerene derivatives. Hydrolysis of the precursors proceeded quantitatively to give the water‐soluble C₆₀ end‐capped oligomers having oligo(sodium 2‐vinyloxyethylmalonate) [oligo(VOEMNa)] and oligo(2‐hydroxyethyl vinyl ether) [oligo(HOVE)] moieties. Solubility measurements revealed the water‐soluble C₆₀ end‐capped oligomer with oligo(VOEMNa) chain to have the excellent aqueous solubility compared to that of the water‐soluble C₆₀ derivatives thus far known; the maximum solubility in water is 96.6 mg/mL, which corresponds to 25.9 mg/mL of the C₆₀ moiety. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3578–3585, 2000     

A first photochemical bis-germylation of C60 with digermirane

[reaction: see text]In the photochemical bis-germylation of C60 with 1,1,2,2-tetrakis(2,6-diethylphenyl)-1,2-digermirane (1), a cycloadduct (2) is obtained in high yield for the first time. Spectroscopic analysis and theoretical investigation confirm that 2 (which has C1 symmetry) results from 1,4-cycloaddition. Control experiments and laser flash photolysis experiments suggest that an exciplex intermediate is responsible for the formation of 2. The redox properties of 2 were examined by differential pulse voltammetry.     

Application and evaluation of solvent-free matrix-assisted laser desorption/ionization mass spectrometry for the analysis of derivatized fullerenes

A variety of derivatized fullerenes have been studied by matrix-assisted laser desorption/ionization (MALDI) mass spectrometry. Of particular emphasis has been the evaluation of a recently introduced solvent-free sample/target preparation method. Solvent-free MALDI is particularly valuable in overcoming adverse solvent-related effects, such as insolubility and/or degradation of the sample. The method was applied to fullerene derivatives susceptible to decomposition under insufficiently "soft" MALDI conditions. Analytes included the hydrofullerene: C(60)H(36), fluorofullerenes: C(60)F(x) where x = 18, 36, 46, 48 and C(70)F(x) where x = 54, 56, methano-bridged amphiphilic ligand adducts to C(60) and the [4 + 2] cycloadduct of tetracene to C(60). The new solvent-free sample preparation is established as an exceedingly valuable addition to the repertoire of preparation protocols within MALDI. The MALDI mass spectra were of very high quality throughout, providing a testimony that "soft" MALDI conditions could be achieved. Using the [4 + 2] cycloadduct of tetracene to C(60) as the model analyte for direct comparison with solvent-based MALDI, the solvent-free approach led to less fragmentation and more abundant analyte ions. Applying solvent-free sample preparation, different matrix compounds have been examined for use in the MALDI of derivatized fullerenes, including sulfur, tetracyanoquinodimethane (TCNQ), 9-nitroanthracene (9-NA) and trans-2-[3-(4-tert-butylphenyl)-2-methyl-2- propenylidene]malononitrile (DCTB). DCTB was confirmed as the best performing matrix, reducing unwanted decomposition and suppression effects.     

On the 1,3-dipolar cycloaddition reactions of indenone with N-N-C dipoles: density functional theory calculations

Density functional theory (DFT) calculations at the B3LYP/6-311G* theoretical level have been performed to study the 1,3-dipolar cycloaddition (1,3-DC) reactions between indenone (1) and different 1,3-dipoles (diazomethane and N-methyl C-methoxy carbonyl nitrilimine, compounds 2 and 3, respectively). The geometrical and energetic properties were analysed for the different reactives, transition states and cycloadducts formed (compounds 4-11). The reactions proceed in the gas-phase by an asynchronous concerted mechanism, yielding different regiochemistry dependent on the 1,3-dipole chosen, although with dipole 3 some degree of synchrony was found in the formation of cycloadduct 5. The 1,3-DC between 1 and 3 was regioselective, being the cycloadduct 11 favoured against 9. The NMR chemical shift parameters (GIAO method) were also calculated for the reactives and cycloadducts.     

Spontaneous copolymerization of 1,3-cyclohexadiene with polar vinyl monomers

In the reactions of 1,3-cyclohexadiene(1,3-CHD) with polar vinyl monomers, CH₂?C(X)Y (X is -? CN and ? CO₂CH₃; Y is ? CI, ? H, and ? CH₃), the two α-chlorosubstituted monomers underwent rapid spontaneous copolymerization, accompanied by the formation of a small amount of cycloadduct. Both polar monomers also gave predominantly copolymers in the reaction with 1,3-cycloheptadiene(1,3-CHpD) in lower yield. 1,3-Cyclooctadiene (1,3-COD) reacted only with α-chloroacrylonitrile (CAN) to give a copolymer, while only cycloaddition took place in systems involving cyclopentadiene(CPD) as diene. The charge–transfer (CT) complex formation of 1,3-CHD with CAN and methyl α-chloroacrylate(MCA) was confirmed by ultraviolet spectroscopic studies and the equilibrium constants estimated were 0.18 and 0.07 liter/mole, respectively, at 25°C in chloroform as solvent. The activation energies for the copolymerizations of 1,3-CHD with CAN and MCA in benzene were determined to be ca. 6.6 and 9.6 kcal/mole, respectively. In the system composed of 1,3-CHD and CAN, only the copolymerization was affected by solvents used and oxygen. Although addition of ZnCl₂ to the system resulted in the acceleration of the both reactions, the variation in the product ratio of copolymer to cycloadduct with ZnCl₂ concentration showed a maximum. Based on the results in the present and preceding studies for systems involving 1,3-cyclodienes and acceptor monomers, the relationship between the cycloaddition and the spontaneous copolymerization is discussed.     

Methylsiloxane Oligomers with Oxyalkyl Fragments in the Side Chain

The dehydrocondensation reactions of α,ω–bis(trimethylsiloxy)methylhydridesiloxane with saturated primary n-alcohols in the presence of anhydrous powder-like potassium hydroxide or platinum on the carbon (Pt/C-5%) at 1:30 ratio of initial compounds, at various temperature (40–60 °C) was carried out, and methylsiloxane oligomers with n-alkyloxy substituted groups in the side chain were obtained. It was shown that completely dehydrocondensation of all active Si H groups do not take place. Dehydrocondensation reaction order, activation energy and rate constants were found. The synthesized oligomers were characterized by ¹H, ¹³C NMR, Cosy and FTIR spectra data. Gel-permeation chromatography, differential scanning calorimetric, thermogravimetric and wide-angle X-ray investigations of synthesized oligomers were carried out.     

Temperature dependence of charge separation and recombination in porphyrin oligomer-fullerene donor-acceptor systems

Electron-transfer reactions are fundamental to many practical devices, but because of their complexity, it is often very difficult to interpret measurements done on the complete device. Therefore, studies of model systems are crucial. Here the rates of charge separation and recombination in donor-acceptor systems consisting of a series of butadiyne-linked porphyrin oligomers (n = 1-4, 6) appended to C(60) were investigated. At room temperature, excitation of the porphyrin oligomer led to fast (5-25 ps) electron transfer to C(60) followed by slower (200-650 ps) recombination. The temperature dependence of the charge-separation reaction revealed a complex process for the longer oligomers, in which a combination of (i) direct charge separation and (ii) migration of excitation energy along the oligomer followed by charge separation explained the observed fluorescence decay kinetics. The energy migration is controlled by the temperature-dependent conformational dynamics of the longer oligomers and thereby limits the quantum yield for charge separation. Charge recombination was also studied as a function of temperature through measurements of femtosecond transient absorption. The temperature dependence of the electron-transfer reactions could be successfully modeled using the Marcus equation through optimization of the electronic coupling (V) and the reorganization energy (λ). For the charge-separation rate, all of the donor-acceptor systems could be successfully described by a common electronic coupling, supporting a model in which energy migration is followed by charge separation. In this respect, the C(60)-appended porphyrin oligomers are suitable model systems for practical charge-separation devices such as bulk-heterojunction solar cells, where conformational disorder strongly influences the electron-transfer reactions and performance of the device.     

Alkene cis-dihydroxylation by [(Me3tacn)(CF3CO2)RuVI O2)]ClO4(Me(3)tacn = 1,4,7-Trimethyl-1,4,7-triazacyclononane): structural characterization of [3 + 2] cycloadducts and kinetic studies

cis-Dioxoruthenium(VI) complex [(Me(3)tacn)(CF(3)CO(2))Ru(VI)O(2)]ClO(4) (1, Me(3)tacn = 1,4,7-trimethyl-1,4,7-triazacyclononane) reacted with alkenes in aqueous tert-butyl alcohol to afford cis-1,2-diols in excellent yields under ambient conditions. When the reactions of 1 with alkenes were conducted in acetonitrile, oxidative C=C cleavage reaction prevailed giving carbonyl products in >90% yields without any cis-diol formation. The alkene cis-dihydroxylation and C=C cleavage reactions proceed via the formation of a [3 + 2] cycloadduct between 1 and alkenes, analogous to the related reactions with alkynes [Che et al. J. Am. Chem. Soc. 2000, 122, 11380]. With cyclooctene and trans-beta-methylstyrene as substrates, the Ru(III) cycloadducts (4a) and (4b) [formula; see text] were isolated and structurally characterized by X-ray crystal analyses. The kinetics of the reactions of 1 with a series of p-substituted styrenes has been studied in acetonitrile by stopped-flow spectrophotometry. The second-order rate constants varied by 14-fold despite an overall span of 1.3 V for the one-electron oxidation potentials of alkenes. Secondary kinetic isotope effect (KIE) was observed for the oxidation of beta-d(2)-styrene (k(H)/k(D) = 0.83 +/- 0.04) and alpha-deuteriostyrene (k(H)/k(D) = 0.96 +/- 0.03), which, together with the stereoselectivity of cis-alkene oxidation by 1, is in favor of a concerted mechanism.     

Synthesis of New Methylsiloxane Oligomers with Pendant Trialkoxysilylethyl Groups for Preparation of Silicon hard Coatings

For the purpose to prepare precursor materials for the silicon hard coatings, the hydrosilylation reactions of α, ω–bis(trimethylsiloxy)methylhydridesiloxane to trialkoxyvinylsilanes in the presence of platinum hydrochloric acid (0.1 M solution in THF), Karstedt's catalyst (Pt₂[(VinSiMe₂)₂O]₃) and platinum on the carbon (5%) were investigated. Hydrosilylation reactions at different ratios of initial compounds and at various temperatures (40–60 °C) were investigated and methylsiloxane oligomers with pendant trialkoxy fragments have been obtained. It was shown that completely hydrosilylation of all active Si H groups do not take place. The hydrosilylation reaction order, activation energy and rate constants were determined. The synthesized oligomers were characterized by ¹H, ¹³C NMR and FTIR spectra data. Gel-permeation chromatography, differential scanning calorimetric, thermogravimetric and wide-angle X-ray investigations of synthesized oligomers were carried out. Synthesized oligomers together with tetraethoxysilane were used for preparation of silicon hard coatings via sol-gel processes.     

Radiolysis of linear model compounds of polyamides

Six oligomers of ε-aminocaproic acid (ACA) from dimer (K2) to heptamer (K7), gamma-irradiated in an oxygen-free atmosphere, were investigated by the EPR method. The oligomers were synthesized and irradiated with⁶⁰Co gamma-rays in the dose range from 0 to 6.5 kGy. The formation of ?CH₂?CONH?CH?CH₂? radical was established. The quantitative determinations of total concentrations of spins were carried out. On the basis of the present and earlier results, the competition of the reactions of detachment of hydrogen and of breaking of ?CONH? bond is discussed. The particular resistance of amide bond in dimer seems to be confirmed by the measurements of kinetics of radical decay. The mass spectrometry of gamma-unirradiated ACA and ACA oligomers K2-K4 was carried out. The results indicate a minute contribution of ionic processes in the radiolysis of ACA oligomers in solid phase.     

Synthesis of macrocycles via cobalt-mediated [2 + 2 + 2] cycloadditions

We investigated the formation of macrocycles from alpha,omega-diynes in cobalt-mediated co-cyclotrimerization reactions. Long-chain alpha,omega-diynes underwent metal-mediated [2 + 2 + 2] cycloadditions with nitriles, cyanamides, or isocyanates in the presence of CpCo(CO)2 (Cp = cyclopentadienide) to yield pyridine-containing macrocycles, i.e., meta- and para-pyridinophanes, such as 5m/5p, 35m/35p, and 41m/41p. The regioselectivity of these reactions was affected by the length and type of linker unit between the alkyne groups, as well as by certain stereoelectronic factors. An analogous alpha,omega-cyano-alkyne, 28, combined with an alkyne to yield two isomeric meta-pyridinophanes, such as 5m and 29m, and an ortho cycloadduct (benzannulation product), such as 29o. We developed a reaction protocol for these cobalt-based [2 + 2 + 2] cycloadditions that involves markedly improved conditions such that this process offers a convenient, flexible synthetic approach to macrocyclic pyridine-containing compounds. For example, diyne 6 reacted with p-tolunitrile in 1,4-dioxane to give 7p and 7m (7:1 ratio) in 87% yield at a moderate temperature of ca. 100 degrees C in 24 h without photoirradiation or syringe-pump addition. Isocyanates were also effective reactants, as exemplified by the formation of 44p almost exclusively (44p:44m > 50:1) in 64% yield from diyne 8 and 2-phenylethylisocyanate. By using this improved protocol we were able to co-cyclotrimerize long-chain alpha,omega-diynes with alkynes in certain cases to demonstrate a successful macrocyclic variant of the Vollhardt reaction. For instance, diyne 6 reacted with dipropylacetylene to give paracyclophane 57p and benzannulene 57o (2:1 ratio) in 29% yield.     

Evidence for the formation of singly bonded dimers during the reductive electrochemistry of methanofullerenes

Four methanofullerene derivatives, with phosphonate or sulfone groups attached to a C(60) core through a Bingel procedure, were synthesized to probe their stability upon electrolytic reduction. Derivatives 1 and 2 are the most stable upon electroreduction and do not exhibit retro-cyclopropanation reactions until more than three electrons per C(60) derivative are transferred. The cyclopropane ring is then removed and C(60)(>CH(2))(n) (n=1-3) products result from reactions of the trianion of C(60) with the solvent, CH(2)Cl(2). The situation with diphosphonate 3 or phosphonatecarboxylate 4 is dramatically different. For 3, quantitative retro-cyclopropanation occurs when 2.8 e(-) per molecule are transferred. In the case of 4, when more than two electrons per molecule are transferred, there is evidence of the reversible formation of a very stable intermediate, which is oxidized at a potential 500 mV more positive than the first fullerene-based reduction of the parent compound. Electrolysis of a simple C(70)-Bingel monoadduct (5) also exhibits the formation of a similar intermediate. On the basis of cyclic voltammetry, ESR spectroscopy, and MALDI analysis of products, the intermediate observed during the electrolysis of compounds 4 and 5 is assigned to a dimeric structure.     

Exclusive formation of alpha-methyleneoxetanes in ketene-alkene cycloadditions. Evidence for intervention of both an alpha-methyleneoxetane and the subsequent 1,4-zwitterion

This paper describes a new mechanistic feature for the Staudinger ketene-alkene cycloaddition reactions to give cyclobutanones. Low-temperature NMR (13C, 19F, and 1H) monitoring of a reaction between bis(trifluoromethyl)ketene (1) and ethyl vinyl ether (2) has shown that the Staudinger reaction proceeds to form initially and exclusively an alpha-methyleneoxetane (3) by [2 + 2](C=O) cycloaddition across the ketene C=O bond. The initial intermediate 3 undergoes ring cleavage to produce a 1,4-zwitterion (4), which is converted to the final [2 + 2](C=C)-type product, cyclobutanone (5). The key intermediate 3 has been isolated in its pure form and was found to be converted to the final products 5 on warming, via the 1,4-zwitterion 4. The alpha-methyleneoxetane 3 is so reactive that it reacts with methanol rapidly even at -80 degrees C via solvolysis to afford an adduct 7. The ion 4 derived from the pure isolated oxetane 3 was intercepted with acetone by a 1,4-dipolar cycloaddition to give a 1,3-dioxane 8. An open-chain alpha,beta-enone (6) has been also obtained from 3. We conclude that the (1 + 2) reaction proceeds in a new three-step mechanism; formation of an alpha-methyleneoxetane 3, a [2 + 2]-type cycloadduct across the C=O bond of ketene, followed by ring cleavage to give the zwitterion 4 and by recombination to form the final product, cyclobutanone 5. The zwitterion 4 is not equilibrating with reactants 1 and 2 but comes from the alpha-methyleneoxetane 3. Exclusive formation of another oxetane 12 has been observed in a reaction between diphenylketene (9) and methyl isopropenyl ether (11). The selectivity of initial formation of cyclobutanone or oxetane has been generalized with aid of frontier-orbital theory and ab initio calculations.     

In situ spectroelectrochemical studies on ladder-type oligomers in solution and the solid state

A series of thermally stable fluoranthenopyracylene oligomers with extended pi conjugation were studied by in situ ESR-UV/Vis/NIR spectroelectrochemistry with respect to their application in devices such as organic light-emitting diodes and field-effect transistors. The oligomers are both soluble in o-dichlorobenzene and form thin films by evaporation in the temperature range of 300-500 degrees C in vacuum. Their electrochemical behavior was studied in reduction (n doping) and oxidation (p doping) under standard voltammetric and thin-layer conditions. The HOMO and LUMO energies and the band gaps of all compounds under study were estimated from both electrochemical and UV/Vis/NIR spectroscopic data. The fluorene-type oligomers A(2)-A(6) and B(2) bearing flexible alkyl chains exhibit both reversible multistep reductions and oxidations. The spectroelectrochemistry indicates substantial differences in delocalization of the positive and negative charges in these ladder-type oligomers. The formation of doubly charged sigma dimers was observed for the first time for both the radical anion and radical cation of the same molecule (B(1)). The redox behavior of the oligomers was studied in the solid state and in solution.     

Mechanism of the

Stereochemical studies on [2 + 2] photoaddition of cis-/trans-4-propenylanisole (cis-1 and trans-1) and cis-1-(p-methoxyphenyl)ethylene-2-d(1) (cis-3-d(1)) to C(60) exhibit stereospecificity in favor of the trans-2 cycloadduct in the former case and nonstereoselectivity in the latter. The observed stereoselectivity in favor of the cis-6-d(3) [2 + 2] diastereomer by 12% in the case of the photochemical addition of (E)-1-(p-methoxyphenyl)-2-methyl-prop-1-ene-3,3,3-d(3) (trans-5-d(3)) to C(60) is attributed to a steric kinetic isotope effect (k(H)/k(D) = 0.78). The loss of stereochemistry in the cyclobutane ring excludes a concerted addition and is consistent with a stepwise mechanism. Intermolecular secondary kinetic isotope effects of the [2 + 2] photocycloaddition of 3-d(0) vs 3-d(1), and 3-d(6) as well as 5-d(0) vs 5-d(1), and 5-d(6) to C(60) were also measured. The intermolecular competition due to deuterium substitution of both vinylic hydrogens at the beta-carbon of 3 exhibits a substantial inverse alpha-secondary isotope effect k(H)/k(D) = 0.83 (per deuterium). Substitution with deuterium at both vinylic methyl groups of 5 yields a small inverse k(H)/k(D) = 0. 94. These results are consistent with the formation of an open intermediate in the rate-determining step.     

Reversible Addition of Carbon Dioxide to Main Group Metal Complexes at Temperatures about 0 °C

The reaction of dialane [LAl-AlL] ( 1 ; L=dianion of 1,2-bis[(2,6-diisopropylphenyl)imino]acenaphthene, dpp-bian) with carbon dioxide results in two different products depending on solvent. In toluene at temperatures of about 0 °C, the reaction gives cycloadduct [L(CO₂)Al-Al(O₂C)L] ( 2 ), whereas in diethyl ether, the reaction affords oxo-bridged carbamato derivative [L(CO₂)(Et₂O)Al(μ-O)AlL] ( 3 ). The DFT and QTAIM calculations provide reasonable explanations for the reversible formation of complex 2 in the course of two subsequent (2+4) cycloaddition reactions. Consecutive transition states with low activation barriers were revealed. Also, the DFT study demonstrated a crucial effect of diethyl ether coordination to aluminium on the reaction of dialane 1 with CO₂. The optimized structures of key intermediates were obtained for the reactions in the presence of Et₂O; calculated thermodynamic parameters unambiguously testify the irreversible formation of the product 3 .     

Synthesis of functionalized arylpyridines and -pyrimidines by domino [4+2]/retro [4+2] cycloadditions of electron-rich dienes with alkynylpyridines and -pyrimidines

Aryl-substituted pyridines and pyrimidines were prepared by [4+2] cycloadditions of alkynyl-substituted pyridines and -pyrimidines with electron-rich dienes. The reactions proceed by formation of a bridged cycloadduct and subsequent thermal extrusion of ethylene. The pyridine moiety plays a crucial role for the success of the reaction.