Isocratic high-performance liquid chromatographic determination of plasma adenosine

Summary Due to manifold physiological and cardioprotective actions of adenosine, the demand for a simple but accurate method to determine its concentration in plasma is increasing. The aim of this study was firstly to develop a simple isocratic method instead of the gradient elution or peak-shifting techniques used earlier and secondly to check conflicting data on the composition of stop-solution, added to the sample in order to prevent changes in adenosine concentration. Isocratic elution improved signal to noise ratio and concentrations of 100 mol L^–1 dipyridamole and 2.5 mol L^–1 erythro-9(2-hydroxy-3-nonyl)adenine in the blood sample effectively prevented both adenosine formation and degradation, even without the use of a 5-ecto-nucleotidase inhibitor. Lowering the concentration of dipyridamole to 25 mol L^–1 caused more than a tenfold increase of adenosine concentration in two out of five cases and even 100 mol L^–1 dipyridamole alone is not sufficient to inhibit adenosine deaminase in blood samples.     

Effect of solute association on the apparent adsorption isotherm. A model of the separation of non-racemic mixtures of enantiomers in achiral chromatographic systems

Summary A computer spreadsheet application has been developed for the optimization of step-gradient elution conditions as applied in coupled-column RPLC for online clean-up and separation in the analysis of pesticide residues. The procedure is based on the experimentally determined retention behaviour of the analytes as a function of mobile phase composition. Retention and peak volumes of the analytes eluting under isocratic and one- and/or two-step gradient conditions can be calculated. For a given set of analytes, the spreadsheet systematically calculates the resolution of the least efficiently separated pair of peaks in the space defined by the eluotropic strengths of the mobile phases and the time at which the step-gradient takes place.The performance of the proposed procedure was tested and evaluated for the analysis of nine polar pesticides for which in a previous study adequate conditions had been found by computer-aided chromatogram simulation. the optimum conditions predicted by the procedure were in good agreement with those established experimentally and by simulation. The simultaneous production of data on retention, peak volume and resolution for a group of analytes under selected one- and/or two step-gradient elution conditions makes the calculation procedure highly productive and flexible in searching for and/or adjusting appropriate separation conditions.     

Reversed phase liquid chromatographic retention behavior of polystyrene homopolymers

Summary Isocratic and gradient elution high performance liquid chromatographic measurements of the retention behavior of polystyrene homopolymers with molecular weights ranging from 2 kD to 390 kD were performed using mixed methylene chloride-methanol mobile phases of varying composition and a C-18 chemically bonded stationary phase supported on either 100 Å or 300 Å mean pore diameter silica. Isocratic measurements of the capacity factor, k, for different molecular weight homopolymers as a function of the volume fraction of methylene chloride, , permit determination of the critical composition, _c, which renders k=1 and the local slope, S=–lnk/_c of the lnk- isotherm at =_c, and also the dependence of _c and S on the degree of polymerization, M. Linear gradient elution measurements of _c and S were also performed and compared to the corresponding isocratic measurements. The general retention behavior and the dependence of _c and S on M compare favorably to the predictions of the theory of homopolymer retention and fractionation developed by Boehm, Martire, Armstrong, and Bui (BMAB). Comparison is also made between the present work and the experimental observations of other workers on related chromatographic systems involving hompolymer retention.     

Evaluation of solute hydrophobicity by reversed-phase high performance liquid chromatography using aqueous binary mobile phases

Summary The dependence of the capacity factor (k′) on the concentration of the organic modifier (D) in the aqueous binary mobile phase in reversed-phase high-performance liquid chromatography has been investigated to evaluate the hydrophobicity of the solute molecule. The r-values, defined as the slope of log k′ vs. log(1/D) plots, were measured for various solutes and related to the non-polar surface area and the partition coefficients. The r-value was found to be a good indication of solute hydrophobicity. Detailed investigation of the results allowed to consider statistically the molecular posture of the solute adsorbed onto the stationary alkyl ligand.     

A chromatographic comparison of the pore structure of zirconia high performance liquid chromatographic materials made by the polymerization induced colloidal aggregation and the Oil Emulsion methods

Summary The pore structures of zirconium oxide particles prepared by two different methods (PICA and Oil Emulsion processes) are compared. Nitrogen sorptometry and size exclusion chromatography are used to characterize the two different types of particles. Significant and unexpected differences were found in the accessible pore volumes and the bed packing densities of the two materials. The PICA material was found to have a higher totally included and totally excluded volume than would be normally expected. The chromatographic method provides results which are more useful for the application of these materials to separation sciences.     

Comparison of octadecyl-bonded silica and styrene-divinylbenzene copolymer sorbents for trace enrichment purposes fundamental aspects II. Linear chromatographic behaviour of the extracting supports

Summary Two reversed-phase LC systems were investigated by frontal analysis for the determination of linear chromatographic conditions, as defined according to the isotherm concept. The Partisil ODS-3 bonded silica and the PRP-1 polystyrene-divinylbenzene resin were used as stationary phases together withtrans-2-hexen-al as test solute and methanol-water mixtures as mobile phases. Particular attention was paid to the respective influence of the two main parameters which may cause sorbent overloading, that is, the capacity factor (k′) and the solute concentration in the mobile phase (C_m). Provided that k′C_m≤10⁻² M, linear chromatographic behaviour was observed for both sorbents, the maximum capacities of which were found greater than 1mmolg⁻¹.     

Effect of the flow rate on the measurement of adsorption data by dynamic frontal analysis

The adsorption data of propyl benzoate were acquired by frontal analysis (FA) on a Symmetry-C18 column, using a mixture of methanol (65%, v/v) and water as the mobile phase, at three different flow rates, 0.5, 1.0 and 2.0 mL/min. The exact flow rates Fv were measured by collecting the mobile phase in volumetric glasses (deltaFv / Fv < or = 0.2%). The extra-column volumes and the column hold-up volume were accurately measured at each flow rate by tracer injections. The detailed effect of the flow rate on the value of the amount adsorbed was investigated. The best isotherm model accounting for the adsorption data was the same BET isotherm model at all three flow rates. Only slight differences (always less than 5%) were found between the three different sets of isotherm parameters (saturation capacity, q(s), equilibrium constant on the adsorbent, b(s) and equilibrium constant on successive layers of propyl benzoate, bL). The reproducibility of the same isotherm parameters measured by the inverse method (IM) is less satisfactory, leading to R.S.D.s of up to 10%. A flow rate increase is systematically accompanied by a slight increase of the amount adsorbed. This phenomenon is consistent with the influence of the pressure on the equilibrium constant of adsorption due to the difference between the partial molar volumes of the solute and the adsorbate. The larger average pressure along the column that is required to achieve a larger flow rate causes a larger amount of solute to be adsorbed on the column at equilibrium. This result comforts the high sensitivity and versatility of the FA method for isotherm determination under any kind of situation.     

The chromatographic behavior of arsenic compounds on anion exchange columns with binary organic acids as mobile phases

Summary Identification and quantification of arsenic compunds was performed with high- performance liquid chromatography (HPLC) and flame atomic absorption spectrometry (FAAS) as element-specific detector. Arsenous acid, methylarsonic acid, dimethylarsinic acid, arsenic acid, arsenobetaine, and arsenocholine were separated on two anion-exchange columns (Synchropak Q 300 and PRP-X 100) with different binary organic acids as mobile phases. The infleunce of chromatographic parameters, such as pH and the concentration of the mobile phase were investigated. An unusual chromatographic behavior of arsenous acid was observed when tartaric acid was used as mobile phase.     

Alternative sample-introduction technique to avoid breakthrough in gradient-elution liquid chromatography of polymers

Gradient-elution liquid chromatography (GELC) is a powerful tool for the characterization of synthetic polymers. However, gradient-elution chromatograms often suffer from breakthrough phenomena. Breakthrough can be averted by using a sample solvent as weak as the mobile phase. However, this approach is only applicable to polymers for which a sufficiently strong solvent exists which is at the same time a weak eluent. Finding such a solvent for a given polymer can be laborious or may even be impossible. Besides, when working with comprehensive two-dimensional LC the effluent of the first dimension is the injection solvent of the second dimension. In this case, it is not possible to avoid breakthrough by adjusting the eluent strength of the second-dimension injection solvent. Therefore, another strategy to avert breakthrough has to be implemented. In this work, we successfully avoided breakthrough in GELC by mixing the mobile phase not before, but after the autosampler. This was demonstrated measuring a blend of poly(methyl methacrylate) standards with different molecular-weights as model mixture with comprehensive two-dimensional GELC × size-exclusion chromatography. The strategy is thought to be applicable to all substances with a sufficiently strong dependence of retention on mobile-phase composition. This typically applies to large molecules (synthetic and natural polymers) and allows efficient refocusing. Unretained and barely retained substances are not refocused and therefore suffer in the proposed setup from peak broadening.     

毛细管色谱过程动力学研究——径向扩散对流出曲线的影响

考虑到毛细管色谱分析过程中径向浓度梯度对传质过程的影响,建立了相应的色谱质量平衡模型,模仿Ｇｉｄｄｉｎｇｓ的假设,将模型适当化简,并通过数学变换的方法得到了流出曲线的一级矩及二、三级中心矩表达式。结果表明,溶质的径向扩散不仅对柱效、峰展宽、峰形特征等有影响,而且对溶质的保留时间也有一定的影响。     

High-performance liquid chromatographic analysis of dinitrobenzene isomers

Summary An efficient, reproducible and rapid high-performance liquid chromatographic method, in normal phase mode, for the analysis of the three dinitrobenzene isomers is described. The method affords good linearity for each isomer in the range 10–160 g ml^–1. The total analysis time is only 10 minutes, and the method shows an accuracy of ±1.25% with a coefficient of variation from 0.30% to 2.85% for different levels of the dinitrobenzene isomers.     

High-performance-liquid chromatographic separation of 1,3,5-trizine herbicides

Summary A number of 11 triazine herbicides and 7 of their corresponding metabolites were separated in a single HPLC run. The separation was achieved on a reversed-phase column using gradient elution with acetonitrile/buffer. Detection was by UV absorption at a wave-length of 220 nm.     

Optimization of stepwise gradient elution in columns chromatography

Summary A general equation for the final retention of a solute chromatographed under conditions of stepwise gradient elution has been derived. The elution process and the distances travelled by solutes as a function of eluent volume were simulated by computer for the optimization of stepwise gradient prorams from isocratic HPLC data. The validity of the equations was experimentally veritied.     

Turbidimetric titration and gradient high-performance liquid chromatography of polystyrene samples

Summary Polystyrene samples of narrow molecular-weight distribution have been eluted according to their molecular weight from columns packed with bare silica Si50, phenyl, or C18 bonded phase by gradients of methanol and tetrahydrofuran (THF) or ofiso-octane and THF. Among the six combinations investigated,iso-octane/THF with a silica column formed a proper normal-phase system whereas methanol/THF with a C18 column formed a proper reversed-phase system. The combinations of C18 column andiso-octane/THF or of Si50 column and methanol/THF gradient did not correspond to the approved polarity rules in high-performance liquid chromatography but were nevertheless effective in separating polystyrene mixtures by molecular weight. Methanol andiso-octane are nonsolvents for polystyrene whereas THF is a solvent. The solubility of polystyrene as a function of molecular weight and concentration was determined by means of turbidimetric titration of solutions in THF with the nonsolvents used in the gradients. The solubility and elution characteristics were almost identical on C18 columns or in methanol/THF combinations. The elution from phenyl bonded phase and Si50 columns usingiso-octane/THF gradients required more THF than the solubility experiments. Information is also given on the occurrence of multimodal elution patterns.     

The gradient volume principle for fast evaluation of optimum conditions for isocratic analysis

Summary The paper describes by simple experiments in a pragmatical way by easy rules of thumbs gradient optimization. Besides selection of the stationary phase and initial and final conditions the two other important variables are program time and eluent flow rate. It is demonstrated, that when the product of both, the gradient volume, is kept constant, the solutes are always eluted with the same eluent composition at column outlet. At constant gradient volume, peak broadening depends on flow rate and on the eluent properties (viscosity) at which the solutes elute, and on the time the solutes spend in the column. Because peak broadening increases with increasing gradient volume, the peak capacity in gradient elution shows an optimum at gradient volumes around 15 empty column volumes (program times 45 to 60 min at flow rates of 1 ml/min with standard columns).Gradient elution can also be used for fast evaluation of optimum eluent composition for isocratic analysis. This procedure requires a calibration of the equipment for determination of eluent composition at column outlet. The sample is chromatographed in a standard gradient run of 10 to 15 empty column volumes. The eluent composition at which the solute of interest elutes during the gradient is used for isocratic analysis, where the k' value of this solute will then be around 2.Part of Ph. D. Thesis H. Elgass, Saarbrücken, 1978, present address Hewlett-Packard, Waldbronn, FRG. In part presented at Eastern Analytical Symposium, New York, 1982.     

Characterization and modeling of nonlinear hydrophobic interaction chromatographic systems

A general rate model was employed in concert with a preferential interaction quadratic adsorption isotherm for the characterization of HIC resins and the prediction of solute behavior in these separation systems. The results indicate that both pore and surface diffusion play an important role in protein transport in HIC resins. The simulated and experimental solute profiles were compared for two model proteins, lysozyme and lectin, for both displacement and gradient modes of chromatography. Our results indicate that a modeling approach using the generate rate model and preferential interaction isotherm can accurately predict the shock layer response in both gradient and displacement chromatography in HIC systems. While pore and surface diffusion played a major role and were limiting steps for proteins, surface diffusion was seen to play less of a role for the displacer. The results demonstrate that this modeling approach can be employed to describe the behavior of these non-linear HIC systems, which may have implications for the development of more efficient preparative HIC separations.     

High-performance liquid chromatographic analysis of azlocillin in serum

Summary A rapid and sensitive high performance liquid chromatographic method is described for the determination of azlocillin in serum. This method involves a short manual protein precipitation of the sample followed by an injection into a PR 18 column for separation and quantitation. The mobile phase was a 22% (V/V) solution acetonitrile in phosphate buffer pH 4.8 at a flow rate of 2,5 ml/min. The spectrophotometer detector was set at 220 nm with a sensitivity of 0.08 AUFS.     

High-performance liquid chromatographic assay of bacterial collagenase

Summary The activity of bacterial collagenase Clostridiopeptidase A was estimated using a labelled synthetic peptide, 4-phenylazobenzyloxycarbonyl-L-Pro-L-Leu-Gly-L-Pro-D-Arg, as substrate. The N-protected dipeptide obtained after enzymatic hydrolysis of Leu-Gly peptide bond was quantified by reversed-phase, high-performance liquid chromatography using 4-phenylazobenzyloxycarbonyl-L-Pro-L-Phe as internal standard. The time dependence of the appearance of the hydrolysis product and the dependence of rates of hydrolysis on collagenase concentration were linear. Kinetic parameters for collagenase were determined to test the suitability of the described procedure.     

Kinetic Study of the Mass Transfer of Bovine Serum Albumin on Cibacron Blue Cellulose Membranes by Using the Multi-Plate and Transport Models

The mass transfer kinetics of bovine serum albumin on Cibacron blue F3GA cellulose affinity membranes has been investigated. It was found that the multi-plate (MP) and transport models successfully described experimental breakthrough curves obtained by single-step frontal analysis. The correlation between the two models was used to estimate the rate coefficients of mass transfer from experimental data. The flow rate was found to have little effect on the performance of affinity membrane separations. The improvement of the performance by increasing the thickness of the membranes was limited. The transport model was simplified by approximating the very sharp Langmuir isotherm determined by a rectangular isotherm and an analytical solution obtained although this was found to be unsuited to describe the experimental data.