Silica-stabilized gold island films for transmission localized surface plasmon sensing

Ultrathin gold films prepared by evaporation of sub-percolation layers (typically up to 10 nm nominal thickness) onto transparent substrates form arrays of well-defined metal islands. Such films display a characteristic surface plasmon (SP) absorption band, conveniently measured by transmission spectroscopy. The SP band intensity and position are sensitive to the film morphology (island shape and inter-island separation) and the effective dielectric constant of the surrounding medium. The latter has been exploited for chemical and biological sensing in the transmission localized surface plasmon resonance (T-LSPR) mode. A major concern in the development of T-LSPR sensors based on Au island films is instability, manifested as change in the SP absorbance following immersion in organic solvents and aqueous solutions. The latter may present a problem in the use of Au island-based transducers for biological sensing, usually carried out in aqueous media. Here, we describe a facile method for stabilizing Au island films while maintaining a high sensitivity of the SP absorbance to analyte binding. Stabilization is achieved by coating the Au islands with an ultrathin silica layer, ca. 1.5 nm thick, deposited by a sol-gel procedure on an intermediate mercaptosilane monolayer. The silica coating is prepared using a modified literature procedure, where a change in the reaction conditions from room temperature to 90 degrees C shortened the deposition time from days to hours. The system was characterized by UV-vis spectroscopy, ellipsometry, XPS, HRSEM, AFM, and cyclic voltammetry. The ultrathin silica coating stabilizes the optical properties of the Au island films toward immersion in water, phosphate buffer saline (PBS), and various organic solvents, thus providing proper conditions where the optical response is sensitive only to changes in the effective dielectric constant of the immediate environment. The silica layer is thin enough to afford high T-LSPR sensitivity, while the hydroxyl groups on its surface enable chemical modification for binding of receptor molecules. The use of silica-encapsulated Au island films as a stable and effective platform for T-LSPR sensing is demonstrated.     

Wide-field single metal nanoparticle spectroscopy for high throughput localized surface plasmon resonance sensing

Noble metal nanoparticles (mNPs) have a distinct extinction spectrum arising from their ability to support Localized Surface Plasmon Resonance (LSPR). Single-particle biosensing with LSPR is label free and offers a number of advantages, including single molecular sensitivity, multiplex detection, and in vivo quantification of chemical species etc. In this article, we introduce Single-particle LSPR Imaging (SLI), a wide-field spectral imaging method for high throughput LSPR biosensing. The SLI utilizes a transmission grating to generate the diffraction spectra from multiple mNPs, which are captured using a Charge Coupled Device (CCD). With the SLI, we are able to simultaneously image and track the spectral changes of up to 50 mNPs in a single (～1 s) exposure and yet still retain a reasonable spectral resolution for biosensing. Using the SLI, we could observe spectral shift under different local refractive index environments and demonstrate biosensing using biotin-streptavidin as a model system. To the best of our knowledge, this is the first time a transmission grating based spectral imaging approach has been used for mNPs LSPR sensing. The higher throughput LSPR sensing, offered by SLI, opens up a new possibility of performing label-free, single-molecule experiments in a high-throughput manner.     

A novel C-shaped, gold nanoparticle coated, embedded polymer waveguide for localized surface plasmon resonance based detection

In this study, a novel embedded optical waveguide based sensor which utilizes localized surface plasmon resonance of gold nanoparticles coated on a C-shaped polymer waveguide is being reported. The sensor, as designed, can be used as an analysis chip for detection of minor variations in the refractive index of its microenvironment, which makes it suitable for wide scale use as an affinity biosensor. The C-shaped waveguide coupled with microfluidic channel was fabricated by single step patterning of SU8 on an oxidized silicon wafer. The absorbance due to the localized surface plasmon resonance (LSPR) of SU8 waveguide bound gold nano particle (GNP) was found to be linear with refractive index changes between 1.33 and 1.37. A GNP coated C-bent waveguide of 200 μ width with a bend radius of 1 mm gave rise to a sensitivity of ~5 ΔA/RIU at 530 nm as compared to the ~2.5 ΔA/RIU (refractive index units) of the same dimension bare C-bend SU8 waveguide. The resolution of the sensor probe was ~2 × 10(-4) RIU.     

Nanosensors based on responsive polymer brushes and gold nanoparticle enhanced transmission surface plasmon resonance spectroscopy

Swelling (and shrinking) of poly(2-vinylpyridine), P2VP, polymer brushes, caused by pH changes, could be readily monitored by transmission surface plasmon resonance, T-SPR, spectroscopy. Gold nanoparticles attached to the P2VP polymer brushes dramatically enhanced the pH-induced shift in the T-SPR absorption spectra. (A 50 nm shift of the absorption maximum of the T-SPR spectrum of the supporting gold nanoislands was observed upon changing the pH from 5.0 to 2.0, corresponding to a swelling of the polymer brushes from 8.1 +/- 0.7 to 24.0 +/- 2.0 nm. Same shift in the opposite direction was observed upon changing the pH from 2.0 to 5.0.)     

In situ self-assembly synthesis of gold nanoparticle arrays on polystyrene microspheres and their surface plasmon resonance

Gold (Au) nanoparticle arrays with tunable morphology and optical characteristics were synthesized by in-situ self-assembly process that occurred on the surface of aniline-modified polystyrene (PS) microspheres. The method can be used to control the growth of both single and aggregated Au nanoparticle arrays on PS microsphere surface. This method could also be adapted for synthesis of other noble metals hybrid materials, which opens exciting opportunities for their practical applications.     

Nanoscale actuation of thermoreversible polymer brushes coupled with localized surface plasmon resonance of gold nanoparticles

This paper describes the fabrication of hybrid nanoassemblies with polymer brushes and gold nanoparticles enabling detection of nanoscale optical changes based on localized surface plasmon resonance. The reversible and thermosensitive nanoscale actuation is achieved by combining stimuli-responsive polymer brushes and gold nanoparticles independently and selectively assembled on substrates. These hybrid nanoassemblies are assembled on numerous substrates and will be applicable for optoelectronics, nanoactuator, and nanosensor applications.     

A surface plasmon resonance study on the optical properties of gold nanoparticles on thin gold films

We report on an investigation of the optical properties of gold nanoparticles assembled as thin films of different thickness. The nanoparticles were linked to the surface of a gold chip by dithiol reagents and studied by surface plasmon resonance (SPR) spectroscopy and atomic force microscopy. There is good correlation between the experimental findings and theoretical simulation, and the respective data reveal the presence of ordered nanostructures in the assemblies. The shift in the SPR angle is linearly dependent on the particle size and the ratio of the different particles. SPR spectroscopy also reveals important information in terms of the optical constants of such films. This shall be further applied to in-situ quality control in the fabrication of optoelectronic, solar cell and semiconductor devices.

Organic vapour sensing using localized surface plasmon resonance spectrum of metallic nanoparticles self assemble monolayer

The response of localized surface plasmon resonance (LSPR) spectra of gold and silver nanoparticles, and gold nanoshells to organic vapors was investigated. The surface area of nanomaterials was sufficiently high for quantitative adsorption of volatile organic compounds (VOCs). Surface adsorption and condensation of VOCs caused the environmental refractive index to increase from n = 1.00 in pure air to as high as n = 1.29 in near saturated toluene vapor. The extinction and wavelength shift of the LSPR spectra were very sensitive to changes in the surface refractive index of the nanoparticles. Responses of the LSPR band were measured with a real-time UV-vis spectrometer equipped with a CCD array detector. The response of silver nanoparticles to organic vapors was most sensitive in changes in extinction, while gold nanoshells exhibited red-shifts in wavelength (∼250 nm/RIU) when exposed to organic vapors. The LSPR spectral shifts primarily were determined by the volatility and refractive indices of the organic species. The T₉₀ response time of the VOC-LSPR spectrum was less than 3 s and the response was completely reversible and reproducible.     

High-sensitivity biosensors fabricated by tailoring the localized surface plasmon resonance property of core-shell gold nanorods

An enhanced sensitive biosensor has been developed to detect biological targets by tailoring the localized surface plasmon resonance property of core–shell gold nanorods. In this new concept, a shell layer is produced on gold nanorods by generating a layer of chalcogenide on the gold nanorod surface after attachment of the recognition reagent, namely, goat IgG and antigen of schistosomiasis japonica. The bioactivity of these attached biomolecules is retained and the sensitivity of this biosensor is thus enhanced significantly. The plasmonic properties of the gold nanorods attached with the biomolecules can be adjusted and the plasmon resonance wavelength can be red-shifted up to several hundred nanometers in the visible or near infrared (NIR) region, which is extremely important to biosensing applications. This leads to a lager red-shift in the localized surface plasmon resonance absorption compared to the original gold nanorod-based sensor and hence offers greatly enhanced sensitivity in the detection of schistosomiasis japonica. The human serum infected with schistosomiasis japonica diluted to 1:50,000 (volume ratio, serum/buffer solution) can be detected readily. The technique offers enhanced sensitivity and can be easily extended to other sensing applications based on not only immuno-recognition but also other types of specific reactions.     

Determination of DNA based on localized surface plasmon resonance light scattering using unmodified gold bipyramids

The DNA was determined based on resonance light scattering (RLS) spectrometry and the localized surface plasmon resonance. The gold bipyramids were used as the probes and synthesized by a seed-mediated method. Cetyltrimethylammonium bromide was used as stabilizing agent. DNA can be bound to the gold bipyramids due to electrostatic interaction and aggregates, which results in a strong enhancement of the RLS intensity. Under the optimal conditions, the intensity of RLS is directly proportional to the concentration of DNA in the range from 0.1 to 2.0 μg mL(-1).     

Anisotropic light absorption by localized surface plasmon resonance in a thin film of gold nanoparticles studied by visible multiple-angle incidence resolution spectrometry

Anisotropic light absorptions via localized surface plasmon resonance in a gold-evaporated film parallel (in-plane; IP) and perpendicular (out-of-plane; OP) to the film surface are studied using visible multiple-angle incidence resolution spectrometry (Vis-MAIRS). When the thin film was aged for eighteen days, the time-dependent Vis-MAIRS IP spectra exhibited significantly different variation from that of the OP spectra: the IP spectra exhibited a large shift to the shorter wavelength side, whereas the OP spectra were explained by a linear combination of three-constituent spectra. The surface topographical analysis of the film revealed that a continuous film coalesced to form aggregates of metal particles. The intrinsic difference between the IP and OP spectra was readily elucidated by considering the surface-parallel and -perpendicular dipoles interaction depending on the topographical changes, which was confirmed by performing spectral simulation using metal particle array models.     

Reversible pH-driven conformational switching of tethered superoxide dismutase with gold nanoparticle enhanced surface plasmon resonance spectroscopy

A new class of surface-immobilized protein nanomachines can be reversibly actuated by cycling the solution pH between 2.5 and 12.3, which induces a conformational change, thereby modulating the thickness of superoxide dismutase (SOD1) tethered to the Au thin film. By placing Au nanoparticles (AuNP) atop the immobilized SOD1 by means of a gold-thiol assembly, the nanoscale motion of SOD1 at the interface produces mechanical work to lift and then lower the AuNP from the Au substrate by a distance of ca. 3 nm and transduces this motion into an easily measurable reflectivity change in the surface plasmon resonance (SPR) spectrum. As-made supported conjugate consisting of SOD1 and AuNP is quite robust and stable, and its operation in response to pH variations, which mirrors the conformational changes of responsive SOD1 at the interface, is found to be highly reversible and reproducible. This is the first demonstration of the development of novel solid-state sensors and/or switching devices based on substrate-bound protein conformational changes and AuNP enhanced SPR spectroscopy.     

Synthesis of gold/polydopamine composite surfaces on glass substrates for localized surface plasmon resonance and catalysis

Composite materials of polydopamine (PDA) and gold nanoparticles on glass substrates (Au/PDA@slide) were obtained via a simple chemical process. First, PDA films (PDA@slide) were formed by immersing slides in 20 mg ml⁻¹ dopamine aqueous solution at pH = 8.5 for 1 h. Then, PDA@slide was dipped in 0.02 M chloroauric acid (HAuCl₄) aqueous solution for a certain time, Au/PDA@slide being formed. Gold nanoparticles were obtained by the reductive properties of PDA. The morphology and chemical composition of the composite material were characterized using scanning electron microscopy, X‐ray diffraction and X‐ray photoelectron spectroscopy. The catalytic properties of Au/PDA@slide were evaluated using the reduction of 4‐nitrophenol (4‐NP) in the presence of sodium borohydride (NaBH₄) aqueous solution at room temperature. The catalytic activity of the optimal Au/PDA@slide was so satisfactory that the reduction of 4‐NP was completed within 10 min. Moreover, the Au/PDA@slide composite material was stable up to five cycles without significant loss of its catalytic activity. In addition, Au/PDA@slide also exhibited photocatalytic ability, photodegrading 2.5 ml of 17.5 mg l⁻¹ methyl orange in 100 min. By measuring the UV–visible absorption bands of Au/PDA@slide, it was proved that the condition of the strongest surface plasmon resonance of Au/PDA@slide was the optimal condition for catalytic reduction of 4‐NP.     

Amplification of localized surface plasmon resonance signals by a gold nanorod assembly and ultra-sensitive detection of mercury

Controlled assembly of gold nanorods induced by Na(3)PO(4) leads to a significant amplification of localized surface plasmon resonance (LSPR) signals. The strong affinity between Au and Hg alters the coupled LSPR signals due to the amalgamation of Hg and Au. This allows detection of Hg in aqueous solutions with ultra-high sensitivity and excellent selectivity, without sample pretreatment.     

Ultrafast dephasing time of localized surface plasmon polariton resonance and the involved damping mechanisms in colloidal gold nanoparticles

In this contribution, for the first time precise in situ measurements of the ultrafast dephasing time T₂ of localized surface plasmon polariton resonances in colloidal gold nanoparticles with the objective to identify the involved damping mechanisms are presented. T₂ is an essential parameter that does not only allow one to determine the field enhancement factor that is of great importance for many applications of nanoparticles, but also reflects the role of different dephasing mechanisms. The most essential result is the observation of a chemical interface damping which causes a dramatic shortening of the dephasing time. While T_2∞ = 9.4 fs can be obtained from the bulk dielectric function, the value shrinks to 3.7 fs if the nanoparticles are in aqueous solution.     

A localized surface plasmon resonance light scattering-based sensing of hydroquinone via the formed silver nanoparticles in system

In this contribution, a simple strategy for the detection of hydroquinone (HQ) is proposed based on the localized surface plasmon resonance light scattering (LSPR-LS) of the silver nanoparticles (AgNPs) formed through the modified silver mirror reaction. The redox reaction between HQ and silver ammonia occurred in the coexistence of sodium hydroxide and ammonia at room temperature, where silver ammonia was reduced by HQ and resulted in the formation of AgNPs without adding the AgNPs seeds. The formed AgNPs were demonstrated to be monodisperse and uniform by transmission electron microscopy (TEM) image. We also studied the localized surface plasmon resonance absorption (LSPR-A) and LSPR-LS spectra using both a UV-vis spectrophotometer and a common spectrofluorometer, and obtained a good agreement between experiments. By carefully optimizing the amount of NaOH and ammonia of the reaction conditions, we were able to obtain the highest net intensity of LSPR-LS on the concentrations of HQ. On the basis of experimental studies, the LSPR-LS intensity enhanced linearly over the range 0.4-2.5 μmol L(-1) with the corresponding limits of determination (3σ) of 70.6 nmol L(-1). With that, the present approach was applied to detect HQ in water samples with satisfactory results.     

A combination of dispersive liquid–liquid microextraction and surface plasmon resonance sensing of gold nanoparticles for the determination of ziram pesticide

We have developed a reliable, fast, and highly sensitive analytical method utilizing dispersive liquid–liquid microextraction and gold nanoparticles probes for ziram (zinc bis(dimethyldithiocarbamate)) determination. The method is based on the in situ formation of gold nanoparticles in carbon tetrachloride as an organic phase. It was found that the trace levels of ziram influenced the formation of gold nanoparticles, leading to absorbance change of a sedimented phase. The results of the colorimetric ziram determination were in the concentration range of 0.12–2.52 ng/mL with a limit of detection of 0.06 ng/mL. The formation of the stable and dispersed gold nanoparticles in the organic phase provides a good precision for dispersive liquid–liquid microextraction method, resulting in the relative standard deviation of 3.8 and 1.2% for 0.56 and 1.58 ng/mL of ziram, respectively. This method has been successfully used for the ziram determination in samples of well and river water, soil, potato, carrot, wheat, and paddy soil.