The structure and thermochemistry of 3:4,5:6-dibenzo-2-hydroxymethylene-cyclohepta-3,5-dienenone (1) and some related compounds

Condensed and gas phase enthalpies of formation of 3:4,5:6-dibenzo-2-hydroxymethylene-cyclohepta-3,5-dienenone (1, (−199.1 ± 16.4), (−70.5 ± 20.5) kJ mol⁻¹, respectively) and 3,4,6,7-dibenzobicyclo[3.2.1]nona-3,6-dien-2-one (2, (−79.7 ± 22.9), (20.1 ± 23.1) kJ mol⁻¹) are reported. Sublimation enthalpies at T=298.15 K for these compounds were evaluated by combining the fusion enthalpies at T = 298.15 K (1, (12.5 ± 1.8); 2, (5.3 ± 1.7) kJ mol⁻¹) adjusted from DSC measurements at the melting temperature (1, (T _fus, 357.7 K, 16.9 ± 1.3 kJ mol⁻¹)); 2, (T _fus, 383.3 K, 10.9 ± 0.1) kJ mol⁻¹) with the vaporization enthalpies at T = 298.15 K (1, (116.1 ± 12.1); 2, (94.5 ± 2.2) kJ mol⁻¹) measured by correlation-gas chromatography. The vaporization enthalpies of benzoin ((98.5 ± 12.5) kJ mol⁻¹) and 7-heptadecanone ((94.5 ± 1.8) kJ mol⁻¹) at T = 298.15 K and the fusion enthalpy of phenyl salicylate (T _fus, 312.7 K, 18.4 ± 0.5) kJ mol⁻¹) were also determined for the correlations. The crystal structure of 1 was determined by X-ray crystallography. Compound 1 exists entirely in the enol form and resembles the crystal structure found for benzoylacetone.     

Standard molar enthalpies of formation of some methylfuran derivatives

The standard (p ^o = 0.1 MPa) molar enthalpies of formation \Updelta_\textf H_\textm^\texto ( \textl), {{\Updelta}}_{\text{f}} H_{\text{m}}^{\text{o}} ( {\text{l),}} of the liquid 2-methylfuran, 5-methyl-2-acetylfuran and 5-methyl-2-furaldehyde were derived from the standard molar energies of combustion, in oxygen, at T = 298.15 K, measured by static bomb combustion calorimetry. The Calvet high temperature vacuum sublimation technique was used to measure the enthalpies of vaporization of the three compounds. The standard (p ^o = 0.1 MPa) molar enthalpies of formation of the compounds, in the gaseous phase, at T = 298.15 K have been derived from the corresponding standard molar enthalpies of formation in the liquid phase and the standard molar enthalpies of vaporization. The results obtained were −(76.4 ± 1.2), −(253.9 ± 1.9), and −(196.8 ± 1.8) kJ mol⁻¹, for 2-methylfuran, 5-methyl-2-acetylfuran, and 5-methyl-2-furaldehyde, respectively.     

Heat capacity,enthalpy and entropy of calcium niobates

Heat capacity and enthalpy increments of calcium niobates CaNb₂O₆ and Ca₂Nb₂O₇ were measured by the relaxation time method (2–300 K), DSC (260–360 K) and drop calorimetry (669–1421 K). Temperature dependencies of the molar heat capacity in the form C _pm=200.4+0.03432T−3.450·10⁶/T ² J K⁻¹ mol⁻¹ for CaNb₂O₆ and C _pm=257.2+0.03621T−4.435·10⁶/T ² J K⁻¹ mol⁻¹ for Ca₂Nb₂O₇ were derived by the least-squares method from the experimental data. The molar entropies at 298.15 K, S _m⁰(CaNb₂O₆, 298.15 K)=167.3±0.9 J K⁻¹ mol⁻¹ and S _m⁰(Ca₂Nb₂O₇, 298.15 K)=212.4±1.2 J K⁻¹ mol⁻¹, were evaluated from the low temperature heat capacity measurements. Standard enthalpies of formation at 298.15 K were derived using published values of Gibbs energy of formation and presented heat capacity and entropy data: Δ_f H ⁰(CaNb₂O₆, 298.15 K)= −2664.52 kJ mol^t-1 and Δ_f H ⁰(Ca₂Nb₂O₇, 298.15 K)= −3346.91 kJ mol⁻¹.     

Standard enthalpies of formation of Li,Na, K,and Cs thiolates

The standard enthalpies of formation of alkaline metals thiolates in the crystalline state were determined by reaction-solution calorimetry. The obtained results at 298.15 K were as follows: \Updelta_\textf H_\textm^\texto (\textMSR,  \textcr) \Updelta_{\text{f}} H_{\text{m}}^{\text{o}} ({\text{MSR,}}\;{\text{cr}}) /kJ mol⁻¹ = −259.0 ± 1.6 (LiSC₂H₅), −199.9 ± 1.8 (NaSC₂H₅), −254.9 ± 2.4 (NaSC₄H₉), −240.6 ± 1.9 (KSC₂H₅), −235.8 ± 2.0 (CsSC₂H₅). These results where compared with the literature values for the corresponding alkoxides and together with values for \Updelta_\textf H_\textm^\texto ( \textMSH,  \textcr) \Updelta_{\text{f}} H_{\text{m}}^{\text{o}} \left( {{\text{MSH}},\;{\text{cr}}}\right) were used to derive a consistent set of lattice energies for MSR compounds based on the Kapustinskii equation. This allows the estimation of the enthalpy of formation for some non-measured thiolates.     

Zirconium Dioxide Solubility in High Temperature Aqueous Solutions

The heat transport purification system of CANDU nuclear reactors is used to remove particulates and dissolved impurities from the heat transport coolant. Zirconium dioxide shows some potential as a high-temperature ion-exchange medium for cationic and anionic impurities found in the CANDU heat transport system (HTS). Zirconium in the reactor core can be neutron activated, and potentially can be dissolved and transported to out-of-core locations in the HTS. However, the solubility of zirconium dioxide in high-temperature aqueous solutions has rarely been reported. This paper reports the solubility of zirconium dioxide in 10⁻⁴ mol⋅kg⁻¹ LiOH solution, determined between 298 and 573 K, using a static autoclave. Over this temperature range, the measured solubility of zirconium dioxide is between 0.9 and 12×10⁻⁸ mol⋅kg⁻¹, with a minimum solubility around 523 K. This low solubility suggests that its use as a high-temperature ion-exchanger would not introduce significant concentrations of contaminants into the system. A thermodynamic analysis of the solubility data suggests that Zr(OH)₄⁰ likely is the dominant species over a wide pH region at elevated temperatures. The calculated Gibbs energies of formation of Zr(OH)₄⁰(aq) and Zr(OH)₄(am) at 298.15 K are −1472.6 kJ⋅mol⁻¹ and −1514.2 kJ⋅mol⁻¹, respectively. The enthalpy of formation of Zr(OH)₄⁰ has a value of −1695±11 kJ⋅mol⁻¹ at 298.15 K.     

Constant-volume combustion energy of the lead salts of 2HDNPPb and 4HDNPPb and their effect on combustion characteristics of RDX–CMDB propellant

The constant-volume combustion energies of the lead salts of 2-hydroxy-3,5-dinitropyridine (2HDNPPb) and 4-hydroxy-3,5-dinitropyridine (4HDNPPb), ΔU _c (2HDNPPb(s) and 4HDNPP(s)), were determined as –4441.92±2.43 and –4515.74±1.92 kJ mol^–1 , respectively, at 298.15 K. Their standard enthalpies of combustion, Δ_c ^m H θ(2HDNPPb(s) and 4HDNPPb(s), 298.15 K), and standard enthalpies of formation, Δ_r ^m H θ(2HDNPPb(s) and 4HDNPPb(s), 298.15 K) were as –4425.81±2.43, –4499.63±1.92 kJ mol^–1 and –870.43±2.76, –796.65±2.32 kJ mol^–1 , respectively. As two combustion catalysts, 2HDNPPb and 4HDNPPb can enhance the burning rate and reduce the pressure exponent of RDX–CMDB propellant.     

Thermodynamics of sodium 5-methylisophthalic acid monohydrate and sodium isophthalic acid hemihydrate

Two crystal samples, sodium 5-methylisophthalic acid monohydrate (C₉H₆O₄Na₂·H₂O, s) and sodium isophthalic acid hemihydrate (C₈H₄O₄Na₂·1/2H₂O, s), were prepared from water solution. Low-temperature heat capacities of the solid samples for sodium 5-methylisophthalic acid monohydrate (C₉H₆O₄Na₂·H₂O, s) and sodium isophthalic acid hemihydrate (C₈H₄O₄Na₂·1/2H₂O, s) were measured by a precision automated adiabatic calorimeter over the temperature range from 78 to 379 K. The experimental values of the molar heat capacities in the measured temperature region were fitted to a polynomial equation on molar heat capacities (C _p,m) with the reduced temperatures (X), [X = f(T)], by a least-squares method. Thermodynamic functions of the compounds (C₉H₆O₄Na₂·H₂O, s) and (C₈H₄O₄Na₂·1/2H₂O, s) were calculated based on the fitted polynomial equation. The constant-volume energies of combustion of the compounds at T = 298.15 K were measured by a precise rotating-bomb combustion calorimeter to be Δ_c U(C₉H₆O₄Na₂·H₂O, s) = −15428.49 ± 4.86 J g⁻¹ and Δ_c U(C₈H₄O₄Na₂·1/2H₂O, s) = −13484.25 ± 5.56 J g⁻¹. The standard molar enthalpies of formation of the compounds were calculated to be Δ _f H _m ^θ (C₉H₆O₄Na₂·H₂O, s) = −1458.740 ± 1.668 kJ mol⁻¹ and Δ _f H _m ^θ (C₈H₄O₄Na₂·1/2H₂O, s) = −2078.392 ± 1.605 kJ mol⁻¹ in accordance with Hess’ law. The standard molar enthalpies of solution of the compounds, Δ _sol H _m ^θ (C₉H₆O₄Na₂·H₂O, s) and Δ _sol H _m ^θ (C₈H₄O₄Na₂·1/2H₂O, s), have been determined as being −11.917 ± 0.055 and −29.078 ± 0.069 kJ mol⁻¹ by an RD496-2000 type microcalorimeter. In addition, the standard molar enthalpies of hydrated anion of the compounds were determined as being Δ _f H _m ^θ (C₉H₆O₄ ²⁻, aq) = −704.227 ± 1.674 kJ mol⁻¹ and Δ _f H _m ^θ (C₈H₄O₄Na₂ ²⁻, aq) = −1483.955 ± 1.612 kJ mol⁻¹, from the standard molar enthalpies of solution and other auxiliary thermodynamic data through a thermochemical cycle.     

Thermal behavior of 3,4,5-triamino-1,2,4-triazole dinitramide

The thermal decomposition behavior of 3,4,5-triamino-1,2,4-triazole dinitramide was measured using a C-500 type Calvet microcalorimeter at four different temperatures under atmospheric pressure. The apparent activation energy and pre-exponential factor of the exothermic decomposition reaction are 165.57 kJ mol⁻¹ and 10^18.04 s⁻¹, respectively. The critical temperature of thermal explosion is 431.71 K. The entropy of activation (ΔS ^≠), enthalpy of activation (ΔH ^≠), and free energy of activation (ΔG ^≠) are 97.19 J mol⁻¹ K⁻¹, 161.90 kJ mol⁻¹, and 118.98 kJ mol⁻¹, respectively. The self-accelerating decomposition temperature (T _SADT) is 422.28 K. The specific heat capacity of 3,4,5-triamino-1,2,4-triazole dinitramide was determined with a micro-DSC method and a theoretical calculation method. Specific heat capacity (J g⁻¹ K⁻¹) equation is C _p = 0.252 + 3.131 × 10⁻³  T (283.1 K < T < 353.2 K). The molar heat capacity of 3,4,5-triamino-1,2,4-triazole dinitramide is 264.52 J mol⁻¹ K⁻¹ at 298.15 K. The adiabatic time-to-explosion of 3,4,5-triamino-1,2,4-triazole dinitramide is calculated to be a certain value between 123.36 and 128.56 s.     

Thermochemical studies of phthalimide and two N-alkylsubstituted phthalimides (ALKYL=ETHYL AND n-PROPYL)

The standard (p⁰=0.1 MPa) molar enthalpies of formation, Δ_fH_m⁰, for crystalline phthalimides: phthalimide, N-ethylphthalimide and N-propylphthalimide were derived from the standard molar enthalpies of combustion, in oxygen, at the temperature 298.15 K, measured by static bomb-combustion calorimetry, as, respectively, – (318.0±1.7), – (350.1±2.7) and – (377.3±2.2) kJ mol^–1. The standard molar enthalpies of sublimation, Δ_cr^gH_m⁰, at T=298.15 K were derived by the Clausius-Clapeyron equation, from the temperature dependence of the vapour pressures for phthalimide, as (106.9±1.2) kJ mol^–1 and from high temperature Calvet microcalorimetry for phthalimide, N-ethylphthalimide and N-propylphthalimide as, respectively, (106.3±1.3), (91.0±1.2) and (98.2±1.4) kJ mol^–1. The derived standard molar enthalpies of formation, in the gaseous state, are analysed in terms of enthalpic increments and interpreted in terms of molecular structure.     

Enthalpy of formation of BaCe<Subscript>0.9</Subscript>In<Subscript>0.1</Subscript>O<Subscript>3−δ</Subscript>(s)

Enthalpy of formation of the perovskite-related oxide BaCe_0.9In_0.1O_2.95 has been determined at 298.15 K by solution calorimetry. Solution enthalpies of barium cerate doped with indium and mixture of BaCl₂, CeCl₃, InCl₃ in ratio 1:0.9:0.1 have been measured in 1 M HCl with 0.1 M KI. The standard formation enthalpy of BaCe_0.9In_0.1O_2.95 has been calculated as −1611.7±2.6 kJ mol⁻¹. Room-temperature stability of this compound has been assessed in terms of parent binary oxides. The formation enthalpy of barium cerate doped by indium from the mixture of binary oxides is Δ_ox H ⁰ (298.15 K)=−36.2±3.4 kJ mol⁻¹.     

Thermochemical Properties of Palladium(II) Chelates Involving Dialkyldithiocarbamates

The standard molar enthalpies of formation of crystalline dialkyldithiocarbamates chelates, [Pd(S₂CNR₂)₂], with R=C₂H₅, n-C₃H₇, n-C₄H₉ and i-C₄H₉, were determined through reaction-solution calorimetry in acetone, at 298.15 K. From the standard molar enthalpies of formation of the gaseous chelates, the homolytic (172.4±3.8, 182.5±3.2,150.9±3.1 and 162.6±3.1 kJ mol⁻¹) and heterolytic (745.0±3.8, 803.7±3.3,834.3±3.1 and 735.2±3.0 kJ mol⁻¹) mean palladium-sulphur bond-dissociation enthalpies were calculated. This revised version was published online in July 2006 with corrections to the Cover Date.     

Thermodynamic characteristics of thermal dissociation of platinum dichloride

The dissociation pressure for the process PtCl₂(s) → Pt(s) + Cl₂(g) was measured by the static method with diaphragm zero-pressure gauges. The approximating equation for the temperature dependence on the dissociation pressure for the above reaction was found. The enthalpy (137.7±0.3 kJ mol⁻¹) and entropy (163.6±0.4 J mol⁻¹ K⁻¹) of PtCl₂(s) dissociation and enthalpies of formation and absolute entropies of platinum di- and trichlorides at 298.15 K were calculated. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1345–1348, June, 2005.     

Contribution of thermal analysis to the description of transport phenomena of pesticides

The vaporization enthalpies of two acetanilide pesticides, alachlor (2’,6’-diethyl-N-(methoxymethyl)-2-chloroacetanilide) and metolachlor (2-chloro-N-(2-ethyl-6-methylphenyl)-N-[(1S)-2-methoxy-1-methylethyl] acetamide), were determined by processing non-isothermal thermogravimetry data according to the Clausius-Clapeyron equation. The reliability of the procedure proposed was tested carrying out some experiments at different heating rates using acetanilide as a reference compound. A good agreement is found among the vaporization enthalpies derived from all the multi-heating rate experiments as well as with the one predicted from the vapor pressure data taken from literature. The vaporization temperatures (T _vap=470±2 K and T _vap=479±2 K) and enthalpies (Δ_vap H°(436 K)=85±1 kJ mol^–1 and Δ_vap H°(436 K)=70±1 kJ mol^–1) for alachlor and metolachlor, were selected, respectively.     

Thermochemical properties of two nitrothiophene derivatives

This article reports the values of the standard (p ^o = 0.1 MPa) molar enthalpies of formation, in the gaseous phase, \Updelta_\textf H_\textm^\texto ( \textg ), {{\Updelta}}_{\text{f}} H_{\text{m}}^{\text{o}} \left( {\text{g}} \right), at T = 298.15 K, of 2-acetyl-5-nitrothiophene and 5-nitro-2-thiophenecarboxaldehyde as −(48.8 ± 1.6) and (4.4 ± 1.3) kJ mol⁻¹, respectively. These values were derived from experimental thermodynamic parameters, namely, the standard (p ^o = 0.1 MPa) molar enthalpies of formation, in the crystalline phase, \Updelta_\textf H_\textm^\texto ( \textcr ) , {{\Updelta}}_{\text{f}} H_{\text{m}}^{\text{o}} \left( {\text{cr}} \right) , at T = 298.15 K, obtained from the standard molar enthalpies of combustion, \Updelta_\textc H_\textm^\texto , {{\Updelta}}_{\text{c}} H_{\text{m}}^{\text{o}} , measured by rotating bomb combustion calorimetry, and from the standard molar enthalpies of sublimation, at T = 298.15 K, determined from the temperature–vapour pressure dependence, obtained by the Knudsen mass loss effusion method. The results are interpreted in terms of enthalpic increments and the enthalpic contribution of the nitro group in the substituted thiophene ring is compared with the same contribution in other structurally similar compounds.     

Thermodynamic properties of strontium metaniobate SrNb<Subscript>2</Subscript>O<Subscript>6</Subscript>

The heat capacity and the enthalpy increments of strontium metaniobate SrNb₂O₆ were measured by the relaxation method (2-276 K), micro DSC calorimetry (260-320 K) and drop calorimetry (723-1472 K). Temperature dependence of the molar heat capacity in the form C _pm=(200.47±5.51)+(0.02937±0.0760)T-(3.4728±0.3115)·10⁶/T ² J K⁻¹ mol⁻¹ (298-1500 K) was derived by the least-squares method from the experimental data. Furthermore, the standard molar entropy at 298.15 K S _m⁰ (298.15 K)=173.88±0.39 J K⁻¹ mol⁻¹ was evaluated from the low temperature heat capacity measurements. The standard enthalpy of formation Δ_f H ⁰ (298.15 K)=-2826.78 kJ mol⁻¹ was derived from total energies obtained by full potential LAPW electronic structure calculations within density functional theory.     

Kinetic study of crystallization of PHB in presence of hydroxy acids

Poly(3-hydroxybutyrate), PHB, has been structurally modified through reaction with hydroxy acids (HA) such as tartaric acid (TA) and malic acid (MA). The crystallization kinetic of the samples was evaluated by isoconversional method through nonlinear fitting to obtain the estimation for activation energy (E _a ) and pre-exponential (A) values. The thermal behavior of the crystallization temperature, 44.8 and 58.9 °C at 5 °C/min, and results obtained to the average activation energy, 73 ± 9 kJ mol⁻¹ and 63 ± 1 kJ mol⁻¹, to PHB/MA and PHB, respectively, are suggesting that malic acid may be deriving plasticizer units from its own PHB chain. PHB/TA show increase in the medium value of E _a, 119 ± 2 kJ mol⁻¹ and T _c = 48.2 °C (at 5 °C/min), indicating that tartaric acid is probably interacts in different way to the of PHB chain (E _a=73 ± 9 kJ mol⁻¹, T _c = 44.8 °C at 5 °C/min).     

Standard molar enthalpies and entropies of vaporization for twolow-melting trichlorophenoxy herbicides

The standard sublimation enthalpies of (2,4,5-trichlorophenoxy)acetonitrile and (2,4,5-trichlorophenoxy)aniline were determined by isothermal thermogravimetry using the Langmuir equation and by non-isothermal differential scanning calorimetry for comparison. The used procedure was previously tested using three reference compounds: benzoic acid, succinic acid and salicylic acid. The results compared to those reported in literature show an excellent agreement for two of the three compounds while the third agrees quite well. For (2,4,5-trichlorophenoxy)acetonitrile and (2,4,5-trichlorophenoxy)aniline, the extrapolation of data at 298.15 K were obtained, respectively: Δ_subH°(298 K)={(106±4) and (101±4)} kJ mol^–1. From Clausius Clapeyron equation obtained after the determination of the vaporization constant α′, the following standard sublimation entropies for (2,4,5-trichlorophenoxy)acetonitrile and (2,4,5-trichlorophenoxy)aniline equal to Δ_subS°(298 K)=(251 and 237) J K^–1 mol^–1, respectively, were derived, with an error of ±4 J K^–1 mol^–1 equal for the studied herbicides.     

Thermochemical study on ternary complex of dysprosium <Emphasis Type="Italic">m</Emphasis>-nitrobenzoic acid with <Emphasis Type="Italic">o</Emphasis>-phenanthroline

A ternary binuclear complex of dysprosium chloride hexahydrate with m-nitrobenzoic acid and 1,10-phenanthroline, [Dy(m-NBA)₃phen]₂·4H₂O (m-NBA: m-nitrobenzoate; phen: 1,10-phenanthroline) was synthesized. The dissolution enthalpies of [2phen·H₂O(s)], [6m-HNBA(s)], [2DyCl₃·6H₂O(s)], and [Dy(m-NBA)₃phen]₂·4H₂O(s) in the calorimetric solvent (V_DMSO:V_MeOH = 3:2) were determined by the solution–reaction isoperibol calorimeter at 298.15 K to be \Updelta_\texts H_\textm^q \Updelta_{\text{s}} H_{\text{m}}^{\theta } [2phen·H₂O(s), 298.15 K] = 21.7367 ± 0.3150 kJ·mol⁻¹, \Updelta_\texts H_\textm^q \Updelta_{\text{s}} H_{\text{m}}^{\theta } [6m-HNBA(s), 298.15 K] = 15.3635 ± 0.2235 kJ·mol⁻¹, \Updelta_\texts H_\textm^q \Updelta_{\text{s}} H_{\text{m}}^{\theta } [2DyCl₃·6H₂O(s), 298.15 K] = −203.5331 ± 0.2200 kJ·mol⁻¹, and \Updelta_\texts H_\textm^q \Updelta_{\text{s}} H_{\text{m}}^{\theta } [[Dy(m-NBA)₃phen]₂·4H₂O(s), 298.15 K] = 53.5965 ± 0.2367 kJ·mol⁻¹, respectively. The enthalpy change of the reaction was determined to be \Updelta_\textr H_\textm^q = 3 6 9. 4 9 ±0. 5 6   \textkJ·\textmol ^{- 1} . \Updelta_{\text{r}} H_{\text{m}}^{\theta } = 3 6 9. 4 9 \pm 0. 5 6 \;{\text{kJ}}\cdot {\text{mol}}^{ - 1} . According to the above results and the relevant data in the literature, through Hess’ law, the standard molar enthalpy of formation of [Dy(m-NBA)₃phen]₂·4H₂O(s) was estimated to be \Updelta_\textf H_\textm^q \Updelta_{\text{f}} H_{\text{m}}^{\theta } [[Dy(m-NBA)₃phen]₂·4H₂O(s), 298.15 K] = −5525 ± 6 kJ·mol⁻¹.     

Kinetic and mechanistic studies on the reaction of thiosemicarbazide with [(H<Subscript>2</Subscript>O)(tap)<Subscript>2</Subscript>RuORu(tap)<Subscript>2</Subscript>(H<Subscript>2</Subscript>O)]<Superscript>2+</Superscript> {tap = 2-(m-tolylazo)pyridine}

The interaction of thiosemicarbazide with the title complex has been studied spectrophotometrically in aqueous medium as a function of [complex], [thiosemicarbazide], pH and temperature at constant ionic strength. At pH 7.4, the reaction shows two distinct paths; both of which are [thiosemicarbazide] dependent. A parallel reaction scheme fits well with the experimental findings. An associative interchange mechanism is proposed for both the paths; the activation parameters calculated from Eyring plots are ΔH₁^≠ = 14.2 ± 0.8 kJ mol⁻¹, ΔS₁^≠ = −241 ± 2 JK⁻¹ mol⁻¹, ΔH₂^≠ = 30.8 ± 1.4 kJ mol⁻¹ and ΔS₂^≠ = −236 ± 4 JK⁻¹ mol⁻¹. From the temperature dependence of the outer sphere association complex equilibrium constants, the thermodynamic parameters calculated are ΔH₁^° = 34.25 ± 1.9 kJ mol⁻¹, ΔS₁^° = 146 ± 6 J K⁻¹ mol⁻¹ and ΔH₂^° = 9.4 ± 1.1 kJ mol⁻¹, ΔS₂^° = 71 ± 3 JK⁻¹ mol⁻¹, which gives a negative ΔG° at all temperatures studied, supporting the spontaneous formation of an outer sphere association complex.     

The Dissolution Properties of 2-(1,1-Dinitromethylene)-1,3-diazepentane in N-methyl Pyrrolidone

The dissolution properties of 2-(1,1-dinitromethylene)-1,3-diazepentane in N-methyl pyrrolidone(NMP) were studied with a RD496-2000 Calvet microcalorimeter at three different temperatures. The measured molar enthalpies (Δ_sol H) for 2-(1,1-dinitromethylene)-1,3-diazepentane in NMP at T=(298.15,306.15,311.15) K are (5.02, 5.59, 6.67) kJ⋅mol⁻¹, respectively. The differential molar enthalpies (Δ_dif H), the specific enthalpies (Δ_sol h), and the standard heat effect (Q ^Θ) for 2-(1,1-dinitromethylene)-1,3-diazepentane in NMP were obtained at the same time. The kinetic parameters of activation energy E and pre-exponential factor A are 2.26×10⁴ J⋅mol⁻¹ and 10^2.06 s⁻¹, which indicate that NMP is a good solvent for the title compound.