Matrix reference materials – provision in Australia

 Until quite recently, Australia has not been much involved in the preparation and certification of matrix reference materials for chemical testing. Even today, the vast bulk of chemical reference materials used in Australia are imported from other world producers. Increased international focus on the accuracy, traceability and comparability of chemical measurements has led to the establishment of the National Analytical Reference Laboratory (NARL) within the Australian Government Analytical Laboratories. Part of the work of NARL will be to supply matrix reference materials, not available from existing sources, to meet specific Australian requirements. This need has been addressed in the past by a combination of industry and government initiatives. Examples include a series of certified matrix reference materials for chemical testing of iron ore, coal and mineral sands produced by Standards Australia and a series of three animal fat matrix reference materials certified for a range of pesticide residues produced by the Australian Chemical Standards Laboratory (now part of NARL). To make effective use of limited resources, it will be important for NARL to focus on identified priorities and to maximise the use of available Australian resources and expertise through technical collaboration for reference material production. An important part of this process should be input on needs and priorities from reference material "users" such as government legislators, regulatory authorities, standards setting bodies, industry and the analytical community. The aim will be to produce matrix certified reference materials that are traceable to SI or other international standards at a stated level of measurement uncertainty.     

On practical metrology and chemical analysis: legal,institutional and technical evolutions in the Australian national measurement system

 Economic and technological change, regional and international trade and the globalisation of industry have led to intense pressures for improvements to analytical quality, reliability and comparability. Of central importance are national traceability structures connecting chemical measurements in the field with internationally accepted measurement units and their practical realisations. Australia has a developed physical and engineering measurement system, a legislative framework for analytical traceability and, in the National Association of Testing Authorities, a recognised laboratory accreditation system. The need has been identified to develop the technical capability to perform matrix-independent reference measurements for the certification of traceable reference materials, useable as practical analytical etalons to establish metrological control systems in field measurements for amounts of substance. Recently, a unique collaborative consortium has proposed a National Analytical Reference Laboratory (NARL). The NARL is designed to be a metrological mass spectrometry facility for the transference of measurement units to more widely useable chemical measurement standards and reference materials. Received: 10 October 1995 Accepted: 26 October 1995     

Comparability and recognition of chemical measurement results – an international goal

As a consequence of the globalisation of trade and industry and other human activities, reliability of and confidence in measurement results is increasingly required, also in the field of chemical analysis, so that measurements made in one country will be accepted in other countries without the necessity to repeat them. The prerequisite for confidence is comparability on the basis of known uncertainties which in turn are based on traceability to recognised references. Traceability structures for chemical measurements are required which, by providing calibration means traceable to national standards, allow uncertainty statements to be made at field level, thus establishing comparability. Such traceability structures are now being developed in all industrialised countries. To ensure international comparability, mutual recognition of the national activities in metrology in chemistry is required in addition. The Mutual Recognition Agreement (MRA) for national measurement standards and calibration certificates issued by national metrology institutes, which is currently under way within the framework of the Metre Convention, aimes at providing the necessary international confidence for all kinds of measurements. The field of chemical analysis is included in the international metrological infrastructure through the new Consultative Committee for Amount of Substance (CCQM). Carefully selected key comparison measurements, which cover the most important areas where traceability is required, and which are carried out by national metrology institutes in cooperation with other national institutes entrusted with the provision of part of the national references for chemical measurements, form the basis for declarations of equivalence under the MRA. The results of the first key comparisons and studies carried out so far clearly show that the group of laboratories involved in the key comparisons is capable of establishing the international references (key comparison reference values) for chemical measurements with sufficient accuracy, also in complicated matrices.     

UK delivery of traceable chemical measurements in the 21st century: building on the foundation of the VAM programme

The paper discusses the requirements for achieving traceable chemical measurements in the UK. It is emphasised that success will depend on establishing an appropriate UK chemical measurement infrastructure and encouraging reference and field laboratories to make use of it. The demanding requirements of the BIPM Mutual Recognition Arrangement (MRA) also require a point of focus to link UK reference laboratories into international metrology. Two key factors are described which have provided the UK with the means to meet these requirements and which have established a sound basis on which to build a system of traceable chemical measurements in the 21st century. These two factors are LGC's long-standing role as the UK's national centre for analytical chemistry and the development and delivery over many years of the UK's Valid Analytical Measurement (VAM) Programme.     

Achieving traceability in chemical measurement—a metrological approach to proficiency testing

ISO/IEC 17025 requires that testing laboratories establish the traceability of their measurements, preferably to the SI units of measurement. The responsibility for establishing traceability lies with each individual laboratory and must be achieved by following a metrological approach.The results of measurements made in such a way are traceable to the standards used in method validation and to the calibration standards used during the measurement process. If these standards are traceable to SI then the measurements will also be traceable to SI.Participation in appropriate proficiency studies (an ISO/IEC 17025 requirement) enables laboratories to demonstrate the comparability of their measurements. If the materials used for the studies have traceable assigned values, then proficiency testing also provides information about measurement accuracy and confirms, or otherwise, that appropriate traceability has been established. This paper will report on a new approach for the establishment of traceable assigned values for chemical testing proficiency studies. The work is conducted at a "fit for purpose" level of measurement uncertainty, with costs contained at a level similar to previous "consensus" based proficiency studies. By establishing traceable assigned values in a cost effective way, NARL aims to demonstrate the added value of the metrological approach to participant laboratories.     

How to achieve international comparability for chemical measurements

 It is the central aim of the current activities of metrology in chemistry to build confidence in the reliability of chemical measurement results so that they are accepted without costly duplication being necessary. An important prerequisite for such confidence is comparability based on traceability to recognised common references, ideally the SI units. Since metrology is organised within a national framework according to the national laws and regulations, a two-step procedure is to be followed to achieve international comparability for chemical measurements which is increasingly required as a result of the globalization of trade and economy: (1) establishment of national traceability structures for chemical measurements and (2) mutual recognition of the national traceability structures on the basis of equivalence criteria. The first step is at present being taken in many countries. Examples are presented for Germany. The second step has been initiated by the Mutual Recognition Arrangement (MRA) of the Meter Convention for national measurement standards and measurements and calibrations provided by national metrology institutes, which is based on international comparison measurements (key comparisons) carried out on the national standards level. Chemical analysis is included in this process through the Consultative Committee for Amount of Substance (CCQM).

     

Recent developments in Australia — reference materials and proficiency testing

The Australian Government Analytical Laboratories (AGAL) has historically been the major provider of chemical and micro biological analytical services to the Australian Government. An equally important role has been the provision of specialist functions associated with:

?development and implementation of new and improved testing methods;

?evaluation and commissioning of new instrumentation;

?advice and assistance to government with the design, implementation and conduct of proficiency testing programs, particularly in areas of chemical testing related to international trade.

In July 1993, in response to increasing international interest in chemical metrology, AGAL established a Valid Analytical Measurement program focused on improving the acceptability of laboratory data and supporting the development of appropriate standards through the National Standards Commission. AGAL has recently surveyed Australian residue testing laboratories to determine their priority requirements for reference materials and inter laboratory check sample programs. Survey results have clearly demonstrated a need for reasonably priced, certified reference materials for pesticide and antibiotic residue testing in raw agricultural produce. There are few reference materials available in this field of testing, particularly for residues of concern in Australia. AGAL has therefore initiated action as follows:

?Preparation and certification of two priority reference materials

1. organochlorines (dieldrin and heptachlor epoxide) in animal fat,
2. organophosphates (diazinon, chlorpyrifos and ethion) in animal fat.

?Investigation of storage stability of animal liver samples containing avermectin, sulphonamide and other antibiotic residues to ascertain suitability for reference material production.

In the area of proficiency testing, AGAL provides ongoing services (in close consultation with NATA, the National Association of Testing Authorities) to the Australian export meat industry. AGAL is seeking to expand this role to involve a wider range of laboratories engaged in residue testing of both export and domestic produce. The Australian Government believes it has an important role to play, particularly in the South East Asian and Pacific Rim regions, in co-operation, collaboration, assistance with training, and provision of specialist technical services.     

How to achieve international comparability for chemical measurements

It is the central aim of the current activities of metrology in chemistry to build confidence in the reliability of chemical measurement results so that they are accepted without costly duplication being necessary. An important prerequisite for such confidence is comparability based on traceability to recognised common references, ideally the SI units. Since metrology is organised within a national framework according to the national laws and regulations, a two-step procedure is to be followed to achieve international comparability for chemical measurements which is increasingly required as a result of the globalization of trade and economy: (1) establishment of national traceability structures for chemical measurements and (2) mutual recognition of the national traceability structures on the basis of equivalence criteria. The first step is at present being taken in many countries. Examples are presented for Germany. The second step has been initiated by the Mutual Recognition Arrangement (MRA) of the Meter Convention for national measurement standards and measurements and calibrations provided by national metrology institutes, which is based on international comparison measurements (key comparisons) carried out on the national standards level. Chemical analysis is included in this process through the Consultative Committee for Amount of Substance (CCQM).     

Accreditation system for reference material producers and certified reference materials for iron and steel in Japan

  ISO 9000 series strictly requires traceability to national or international measurement standards. It is becoming more necessary to make clear the concept of traceability of measurement standards with respect to chemical composition and to accredit the reference material producers. In Japan, the accreditation system for reference material producers is considered to satisfy the requirement of ISO Guide 34, ISO 9000 series and ISO/IEC Guide 25, while the producer fulfills the concept of traceability of measurement standards. This paper describes the production of iron and steel reference materials in Japan relating to the international standardization of methods (written standards) and accreditation of reference material producers. Received: 11 October 1996 Accepted: 5 December 1996     

A natural matrix (pureed tomato) candidate reference material containing residue concentrations of pesticide chemicals

NARL (the Australian National Analytical Reference Laboratory) is preparing a pureed tomato reference material spiked with residue concentrations of a range of pesticide chemicals relevant to the Australian horticultural industry. Traceable certified pesticide concentration values will be established using both isotope dilution mass spectrometry primary methods (developed within NARL) and measurements carried out by a number of experienced laboratories. As far as we are aware, there is no other similar CRM available anywhere in the world. The need for such a material is evident from the results of interlaboratory proficiency studies conducted by NARL among Australian and Asia-Pacific residue testing laboratories. Many participants are experiencing difficulties with the analysis of pesticide residues in fruit and vegetables at concentrations of regulatory significance. Chemicals such as methamidophos (an organophosphorus pesticide widely used on tomato crops) are causing particular problems. In a pilot study, a number of units of control (unspiked tomato) and the candidate reference material were prepared and packaged into lacquered steel cans which were sealed and sterilised by immersion in boiling water. Accelerated stability testing of the packaged material was conducted using isochronous measurement. All of the pesticides showed some degree of degradation after 4 weeks of storage at 50 degrees C, and after 168 days of storage at room temperature. However, all appeared to be stable after 168 days of freezer storage. Homogeneity testing involved duplicate test portions taken from every 50th unit of reference material. An experimental protocol was devised with the aim of minimising the analytical variability and assuring the quality of the data generated. There is some degree of inhomogeneity in the prepared material and a small fill trend is also indicated. Potential improvements to the spiking and preparation procedure have been identified and it is planned to prepare a second batch of both control and spiked material for further homogeneity trials and for certification of the pesticide concentrations.     

The role of metrology in chemistry in the upholding of public health and food safety in Hong Kong

The Government Laboratory has been involved in the provision of analytical and advisory services since its formal establishment in 1913 in support of the needs of the community and the commitments of the Government of Hong Kong Special Administrative Region, China. One of the earliest areas of work involves the testing of food samples for maintenance of public health and food safety. Remarkable advances in technology in recent years coupled with the introduction of new policies and regulations, the launching of new international standards and requirements have all contributed to significant and ever-rising demand of accurate, specific, comparable and traceable measurements using the latest technologies for a wide variety of additives, contaminants, residues and genetically modified ingredients in food.Metrology, the science of measurement, has always played a key role in the development and validation of analytical methodologies in the Government Laboratory for the realization of its measurements to the highest level of accuracies and traceability to internationally recognized standards. Besides the application of the latest analytical technologies such as isotope dilution mass spectrometry, tandem mass spectrometry, real-time polymerase chain reactions, etc., the Analytical and Advisory Services Division of the Laboratory develops a quality assurance system in full compliance with the requirements of ISO/IEC 17025 and endeavours to ensure that every analytical methods are validated with the best applicable means and are fit for the intended purposes. In this presentation, the role and application of metrology in chemistry in the measurements pertaining to public health and food safety work undertaken by the Government Laboratory are discussed.Presented at International Symposium on Metrology in Chemistry, 2004 Beijing, China.     

A natural matrix (pureed tomato) candidate reference material containing residue concentrations of pesticide chemicals

NARL (the Australian National Analytical Reference Laboratory) is preparing a pureed tomato reference material spiked with residue concentrations of a range of pesticide chemicals relevant to the Australian horticultural industry. Traceable certified pesticide concentration values will be established using both isotope dilution mass spectrometry primary methods (developed within NARL) and measurements carried out by a number of experienced laboratories. As far as we are aware, there is no other similar CRM available anywhere in the world. The need for such a material is evident from the results of interlaboratory proficiency studies conducted by NARL among Australian and Asia-Pacific residue testing laboratories. Many participants are experiencing difficulties with the analysis of pesticide residues in fruit and vegetables at concentrations of regulatory significance. Chemicals such as methamidophos (an organophosphorus pesticide widely used on tomato crops) are causing particular problems. In a pilot study, a number of units of control (unspiked tomato) and the candidate reference material were prepared and packaged into lacquered steel cans which were sealed and sterilised by immersion in boiling water. Accelerated stability testing of the packaged material was conducted using isochronous measurement. All of the pesticides showed some degree of degradation after 4 weeks of storage at 50?°C, and after 168 days of storage at room temperature. However, all appeared to be stable after 168 days of freezer storage. Homogeneity testing involved duplicate test portions taken from every 50th unit of reference material. An experimental protocol was devised with the aim of minimising the analytical variability and assuring the quality of the data generated. There is some degree of inhomogeneity in the prepared material and a small fill trend is also indicated. Potential improvements to the spiking and preparation procedure have been identified and it is planned to prepare a second batch of both control and spiked material for further homogeneity trials and for certification of the pesticide concentrations.     

A way of establishing quality of measurements in gas analysis—national and international aspects

Standardising quality of measurements at both the national and international level results in a unity in measurement that may be regarded a synonym of traceability. In gas analysis, the key issue in achieving this aim is production of gaseous reference materials. Establishing a network of secondary measurement standards at gaseous CRM producers’ sites in Ukraine might be interesting for those involved in gas analysis activities. Inevitably, problems concerning the recognition of measuring capabilities of both national metrological institutes and local CRM producers are now an international issue. Thus, the problems of national adoption of international standards, as well as harmonisation between different international documents are currently relevant, and Ukrainian experience may be useful to others in this field. Presented at the 3rd International Conference on Metrology, November 2006, Tel Aviv, Israel.     

The synthesis and characterization of pure substance reference materials for forensic, agricultural and drugs-in-sport analysis

 The paper reports work on the synthesis, purification and certification of pure substance (organic) reference materials as conducted within the National Analytical Reference Laboratory (NARL). Areas of interest include illicit drugs, agricultural and veterinary chemicals, and steroids and steroid metabolites and their deuterates. The discussion covers the prioritization of work requirements, procedures for synthesis and production, quality assurance, characterization, homogeneity, storage and stability testing, and certification of materials. Future plans for establishing traceability are also discussed.     

Measurement uncertainty and its meaning in legal metrology of environmental chemistry and public health

 The need for reliability of measurements supporting legal decisions in environmental policy or medical diagnosis and treatment is well known and widely accepted. This prerequisite can be met only by ensuring that legal measurements are accurate and traceable to national or international standards. Consequently, an outline of the organizational structure of the Romanian National Institute of Metrology (INM) for ensuring uniformity, consistency and accuracy of all measurements including legal measurements performed in chemical laboratories is presented. Since reliable measurements can only be accomplished within an appropriate traceability chain, the experience of the INM in identification and evaluation of measurement uncertainty in legal activities concerning the environment and health is reviewed. Practical examples of measurement uncertainty evaluation in spectrophotometric determination of five analytes, commonly determined in environmental and clinical chemistry are described. The implications of measurement uncertainty for interpretation of regulatory compliance are discussed. Received: 3 January 1998 · Accepted: 9 June 1998     

The 14th Australian Symposium on Analytical Chemistry. Adelaide, 5–9 July 1997

 The Analytical Division of the Royal Australian Chemical Institute (RACI) held its 14th biennial symposium on analytical chemistry (14AC) in Adelaide, South Australia on 5–9 July 1997 [1]. The theme, "A broader view of the world" was an explicit invitation from the organisers to analysts to "take time away from their laboratories and consider how their work affects the world . . . A major challenge to chemists is to redefine their role in industry, education and the community and face, head-on, the demands brought about by free trade, economic rationalism and the environment." Part of this challenge, as reflected in invited plenary and keynote speakers as well as the cut and thrust of debate on the conference floor, is to address the important role of chemical measurement and confidence in the domestic and international systems of measurement.     

A national traceability system for chemical measurements

Current developments in Germany for establishing a traceability system for chemical measurements are reported. The focus is on a dissemination mechanism which employs chemical calibration laboratories accredited within the framework of the German Calibration Service (DKD) and acting as "multipliers" between the national standards level and the user level by providing the user with calibration means which are traceable to the SI via national standards. At the national standards level, a network of high-level chemistry institutes coordinated by the national metrology institute, PTB, provides the primary references for chemical measurements.The use of the metrological dissemination system provided by the DKD also for chemical measurements is a logical extension of a traceability mechanism, successful for more than two decades in general metrology, to metrology in chemistry. In detail, traceability structures in clinical chemistry, electrochemistry, elemental analysis and gas analysis are described. This system has become an important part of the efforts made in Germany to support chemical laboratories in meeting the traceability requirements of the market and of legal regulations.     

Some recent developments in reference methodology within the United Kingdom

 The UK Valid Analytical Measurement Programme has pump-primed developments in chemical metrology, through a major project on reference methodology and reference materials. This paper provides an overview of developments during 1994–1997 and covers work on primary methods for trace inorganic and trace organic analysis, including the use of isotope dilution mass spectrometry; studies of sample pre-treatment, including digestion, extraction, and separation aimed at improving this weak link in the traceability chain; prioritisation, production and marketing of both pure substance and matrix reference materials; and international collaboration concerned with interlaboratory comparisons and the development of concepts, terminology and systems to underpin the international chemical measurement system. References are given to a number of papers covering specific parts of the programme. Received: 5 August 1998 · Accepted: 12 September 1998     

The traceability of analytical measurements

 Traceability to the System International (SI) is an important prerequisite for international comparability and uniformity of chemical measurements to ensure mutual recognition of the results. In theory, all measurements can be traced back to the seven base units of the SI. Although the traceability system works well for most physical measurements, in many analytical and in some spectrophotometric measurements this system is not satisfactory. This paper describes the particular and practical problems and the contribution of the Romanian National Institute of Metrology in this field. The paper discusses the following concepts: clearly defined targets in the form of requirement specification, knowledge of trueness and/or measurement uncertainty, and traceability through an unbroken chain of calibration to primary standards. Traceability and uncertainty being two concepts inherently coupled, two examples of assessment of the uncertainty of measurement results are given for two spectrophotometric methods currently used in chemical laboratories. Received: 17 July 1996 Accepted: 2 September 1996     

Optimising calibration and measurement capabilities in terms of economics in conformity assessment

Calibration measurement capabilities (CMC) are key factors in declaring the metrological performance of national metrology institutes (NMIs). Different countries have different CMC capabilities, reflecting both the existing measurement science competence as well as the perceived national needs for traceable calibration. This paper deals with increasing interest in decision-making in conformity assessment in terms of effective costs associated with measurement, testing and incorrect decision-making. The work examines the CMCs of calibration laboratories and NMIs with economic decision theory, in particular, in terms of customer satisfaction and with respect to conformity assessment issues. Optimal strategies for calibration costs, maintenance of national measurement standards, testing and production costs are illustrated in practical examples. CMCs are an essential instrument to enable conformity assessment both for product safety, legal metrology, quality requirements as well as scientific research. The newly defined term “target measurement uncertainty”, introduced in the latest international metrology vocabulary (VIM), should be therefore always related to appropriate CMCs and related dissemination paths in the whole conformity assessment procedure. These requirements are clear and transparent justification for the development of required national metrological infrastructures, in order to fulfil the requirements of target measurement uncertainty for intended use or application in the particular conformity assessment procedure.