Radiation grafting of pH and thermosensitive N-isopropylacrylamide and acrylic acid onto PTFE films by two-steps process

Polytetrafluoroethylene (PTFE) was grafted (g) with acrylic acid (AAc) by γ-ray pre-irradiation method to get PTFE-g-AAc films, then N-isopropylacrylamide (NIPAAm) was grafted onto PTFE-g-AAc films with γ-ray to get (PTFE-g-AAc)-g-NIPAAm. PTFE films were irradiated in air at a dose rate of 3.0 kGy h^–1 and different radiation dose. The irradiated films were placed in glass ampoules, which contained aqueous solutions with different monomer concentration (AAc), and then they were heated at different temperatures and reaction time. NIPAAm onto PTFE-g-AAc was carried out with the same procedure with monomer concentration of 1 mol L⁻¹. The thermosensitivity of the samples was defined and calculated as the ratio of the grafted samples swelling at 28 and 35 °C, and pH sensitivity defined as the ratio of the grafted samples swelling at pH 2 and 8.     

Influence of substituted groups on the binding ability of benzoyl-modified β-cyclodextrins

A series of substituted benzoyl modified β-cyclodextrins, including mono-6-O-(p-methylbenzoyl)-β-CD (1), mono-6-O-(m-methylbenzoyl)-β-CD (2), mono-6-O-(o-methylbenzoyl)-β-CD (3), mono-6-O-(p-methoxylbenzoyl)-β-CD (4), mono-6-O-(m-methoxylbenzoyl)-β-CD (5), mono-6-O-(o-methoxylbenzoyl)-β-CD (6), mono-6-O-(m, p-dimethoxylbenzoyl)]-β-CD (7), mono-6-O-(o,m-dimethoxylbenzoyl)-β-CD (8), and mono-(6-O-benzoyl)-β-CD (9) were synthesized and their inclusion properties were studied by using fluorescence spectroscopy. The binding constants (K_a) of the modified β-CD derivatives with 2-p-toluidinylnaphthalene-6-sulfonate (TNS) were determined on the basis of the fluorescence spectroscopy. The effect of types and location of substituted groups of the benzene ring of the modified β-cyclodextrins on the binding property was discussed. Results indicated that the substituents had significant influences on the binding abilities of modified β-cyclodextrins.     

Linear relationships in α,β-unsaturated carbonyl compounds between the half-wave reduction potentials, the frontier orbital energies and the Hammett σp values

A linear relationship between the half-wave reduction potentials of α,β-unsaturated carbonyl compounds R–CHCH–COX and the Hammett σ_p values of R and X is proposed: E_1/2=−1.341σ_p(X)σ_p(R)+1.123σ_p(X)+1.746σ_p(R)−1.694. A linear relationship is also observed for the LUMO's energy values, the absolute chemical hardness η, the chemical potential μ, the electrophilicity power ω, or the polarisation of the ethylenic double bond with the Hammett σ_p values of R and X.     

η- and η-benzene coordination in [Ag(C6D6)3BF4]

The title complex with one η² and two η¹ deuterobenzene and one monodentate BF₄ ligands was isolated as a by-product in the reaction between [(dppe)RhCl]₂ and EtCl in C₆D₆, in the presence of AgBF₄ and its X-ray crystal structure determined.     

The synthesis, structure and reactivity of aldehyde substituted η-allylic complexes of molybdenum

Reaction of cis-[Mo(NCMe)₂(CO)₂(η⁵-L)][BF₄] (L=C₅H₅ or C₅Me₅) with 1-acetoxybuta-1,3-diene gives the cationic complexes [Mo{η⁴-syn-s-cis-CH₂CHCHCH(OAc)}(CO)₂(η⁵-L)][BF₄], which, on reaction with aqueous NaHCO₃/CH₂Cl₂, afford good yields of the anti-aldehyde substituted complexes [Mo{η³-exo-anti-CH₂CHCH(CHO)}(CO)₂(η⁵-L)] 2 (L=C₅Me₅), 4 (L=C₅H₅)]. The corresponding η⁵-indenyl substituted complex 5 was prepared by protonation (HBF₄·OEt₂) of [Mo(η³-C₃H₅)(CO)₂(η⁵-C₉H₇)] followed by addition of CH₂=CHCH=CH(OAc) and hydrolysis (aq. NaHCO₃/CH₂Cl₂). An X-ray crystallographic study of complex 2 confirmed the structure and showed that there is a contribution from a zwitterionic form involving donation of electron density from the molybdenum to the aldehyde carbonyl group. Treatment of 2 and 4, in methanol solution, with NaBH₄ afforded the alcohols [Mo{η³-exo-anti-CH₂CHCHCH₂(OH)}(CO)₂(η⁵-L)] [6 (L=C₅H₅), 8 (L=C₅Me₅)]; however, prolonged (30 h) reaction with NaBH₄/MeOH surprisingly gave good yields of the methoxy-substituted complexes [Mo{η³-exo-anti-CH₂CHCHCH₂(OMe)}(CO)₂(η⁵-L)] [7 (L=C₅H₅), 9 (L=C₅Me₅)], the structure of 7 being confirmed by single crystal X-ray crystallography. This methoxylation reaction can be explained by coordination of the hydroxyl group present in 6 and 8 onto B₂H₆ to form the potential leaving group HOBH₃⁻, which on ionisation affords [Mo(η⁴-exo-buta-1-3-diene)(CO)₂(η⁵-L)]⁺ which is captured by reaction with OMe⁻. Complex 8 is also formed in good yield on reaction of 2 with HBF₄·OEt₂ followed by treatment of the resulting cation [Mo{η⁴-exo-s-cis-syn-CH₂CHCHCH(OH)}(CO)₂(η⁵-C₅Me₅)][BF₄] with Na[BH₃CN]. Reaction of 4 with the Grignard reagents MeMgI, EtMgBr or PhMgCl afforded moderate yields of the alcohols [Mo{η³-exo-anti-CH₂CHCHCH(OH)R}(CO)₂(η⁵-C₅H₅)] [11 (R=Me), 12 (R=Et), 13 (R=Ph)]. Similarly, treatment of 2 with MeLi gave the corresponding alcohol 14. An attempt to carry out the Oppenauer oxidation [Al(OPr′)₃/Me₂CO] of 11 resulted in an elimination reaction and the formation of the η³-s-pentadienyl complex [Mo{η³-exo-anti-CH₂CHCH(CHCH₂)}(CO)₂(η⁵-C₅H₅)], which was structurally identified by X-ray crystallography. Interestingly, oxidation of 6 with [Bu₄ⁿN][RuO₄]/morpholine-N-oxide affords the aldehyde complex, 4 in good yield. Finally, reaction of 11 with [NO][BF₄] followed by addition of Na₂CO₃ affords the fur-3-ene complex [Mo{η²-

(H)Me}(CO)(NO)(η⁵-C₅H₅)].     

Properties of the perovskites, SrMn1−xFexO3−δ (x=1/3, 1/2, 2/3)

The SrMn_1−xFe_xO_3−δ (x=1/3, 1/2, 2/3) phases have been prepared and are shown by powder X-ray and neutron (for x=1/2) diffraction to adopt an ideal cubic perovskite structure with a disordered distribution of transition-metal cations over the six-coordinate B-site. Due to synthesis in air, the phases are oxygen deficient and formally contain both Fe³⁺ and Fe⁴⁺. Magnetic susceptibility data show an antiferromagnetic transition at 180 and 140 K for x=1/3 and 1/2, respectively and a spin-glass transition at 5, 25, 45 K for x=1/3, 1/2 and 2/3, respectively. The magnetic properties are explained in terms of super-exchange interactions between Mn⁴⁺, Fe^(4+δ)+ and Fe⁽³⁺⁾⁺. The XAS results for the Mn-sites in these compounds indicate small Mn-valence changes, however, the Mn-pre-edge spectra indicate increased localization of the Mn-e_g orbitals with Fe substitution. The Mössbauer results show the distinct two-site Fe⁽³⁺⁾+/Fe^(4+δ)+ disproportionation in the Mn- substituted materials with strong covalency effects at both sites. This disproportionation is a very concrete reflection of a localization of the Fe-d states due to the Mn-substitution.     

α- and β-cyclodextrin complexes with n-alkyl carboxylic acids and n-alkyl p-hydroxy benzoates. A molecular mechanics study of 1:1 and 1:2 associations

Molecular mechanics (MM) methods were employed to evaluate stabilization upon formation of inclusion compounds between two different guest molecules and α- and β-cyclodextrins (CDs) for two different stoichiometries 1:1 and 1:2. The two guest molecules studied were n-alkyl carboxylic acids and n-alkyl p-hydroxy benzoates with variety of chain lengths. The computed stability for the inclusion compounds between α-CDs and n-alkyl carboxylic acids reproduced experimental data reported in the literature. The transition between 1:1/1:2 complexes occurred at an alkyl chain length of n_C=9. It was previously demonstrated by diffusion coefficients measures that a stable 1:2 stoichiometry inclusion compound could be formed between n-alkyl p-hydroxy benzoates and α-CD for the chain length n_C>4. The computed results reproduced the experimental ones. The combination between OPLS and GB/SA resulted in better agreements with experiments than those obtained with MM2 and MM3.     

Preparation, characterization and the standard enthalpy of formation of La0.95MnO3+δ and Sm0.95MnO3+δ

Among the perovskites, the rare earth manganites find application in several electrochemical devices because of their enhanced thermodynamic stability. In this paper, we present the results obtained on the preparation and characterization of La_0.95MnO_3+δ and Sm_0.95MnO_3+δ which were prepared by the solid state and sol–gel methods. XRD characterization of the manganites indicated that the crystal structure depends on the method of preparation and heat treatments. The ratio of Mn³⁺ to Mn⁴⁺ in these samples also depended on the method of preparation and heat treatments, as indicated by thermogravimetric (TG) and temperature programmed reduction (TPR) studies in Ar + 5% H₂ atmosphere. The standard molar enthalpy of formation, which is a measure of the thermodynamic stability of these compounds were determined using an isoperibol calorimeter.     

Inelastic neutron scattering and vibrational spectra of 2-(N-methyl-α-iminoethyl)-phenol and 2-(N-methyliminoethyl)-phenol: Experimental and theoretical approach

The infrared, Raman, and inelastic neutron scattering (INS) spectra of two ortho-hydroxy aryl Schiff’s bases, 2-(N-methyliminoethyl)-phenol and 2-(N-methyl-α-iminoethyl)-phenol, were recorded. Ab initio molecular orbital calculations employing the DFT (B3LYP) method with the 6-31G** basis set for both compounds were done. Assignments of vibrational modes within the 3500–50 cm⁻¹ spectral region were carried out. On the basis of the DFT calculations, four rotomers of 2-(N-methyl-α-iminoethyl)-phenol were analysed.     

Crystal structure and IR spectrum of 1-O-α- -glucopyranosyl- -mannitol–ethanol (2/1)

1-O-α- -Glucopyranosyl- -mannitol–ethanol (2/1), (C₁₂H₂₄O₁₁)₂–C₂H₅OH, crystallizes in the monoclinic space group P2₁ with unit cell dimensions a=11.4230(8) Å, b=9.525(4) Å, c=15.854(2) Å, β=102.751(7)° and V=1682.4(7) ų, Z=2, D_x=1.45 Mg m⁻³, λ (Mo-K_α)=0.71069 Å, μ=0.128 mm⁻¹, F(000)=788 and T=293(2) K. The structure was solved by direct methods and refined by least-squares calculations on F² to R₁=0.0371[I>2σ(I)], and 0.0930 (all data, 3542 independent reflections, R_int=0.021). There are two molecules of glucopyranosylmannitol (GPM) and one ethanol molecule in the asymmetric unit, and the glucopyranosyl ring adopts a chair conformation in both GPM molecules. Bond lengths and angles accord well with the mean values of related structures. The conformation along the mannitol side chain for one of the GPM molecules was the same as for the known polymorphs of -mannitol, while the conformation of the other molecule was different, indicating different conformational arrangements in the terminal carbon atoms of the mannitol side chains of the two GPM molecules. The structure in 1-O-α- -glucopyranosyl- -mannitol–ethanol (2/1) is held together by a very complex hydrogen bonding system, which consists of an infinte chain propagating along the b-axis and a discontinuous chain, which binds the ethanol molecule to the structure. The FTIR spectra for anhydrous GPM, GPM dihydrate and GPM–ethanol (2/1) were recorded. Both IR and X-ray results indicate the extensive hydrogen bonding in crystalline state.     

Chemoselective anti-Markovnikov hydroamination of α,β-ethylenic compounds with amines using montmorillonite clay

The catalytic activity of montmorillonite clays as a catalyst for the hydroamination of α,β-ethylenic compounds with amines was tested. Aniline and substituted anilines reacted with α,β-ethylenic compounds in the presence of catalytic amount of commercially available clay to afford exclusively anti-Markovnikov adduct in excellent yields. Aniline reacted with ethyl acrylate to yield only anti-Markovnikov adduct N-[2-(ethoxycarbonyl)ethyl]aniline (mono-addition product). No Markovnikov adduct (N-[1-(ethoxycarbonyl)ethyl]aniline and double addition product N,N-bis[2-(ethoxycarbonyl)ethyl]aniline were formed under selected reaction conditions. For a better exploitation of the catalytic activity in terms of increased activity and improved selectivity for the mono-addition product, the reaction parameters were optimized in terms of temperature, solvent, reactant mole ratio. Under optimized reaction conditions, montmorillonite clay K-10 showed a superior catalytic performance in the hydroamination of ethyl acrylate with aniline with a conversion of aniline to mono-addition product (almost 100% chemoselectivity) with a high rate constant 0.3414 min⁻¹ compared to the reported protocols. The dependence of conversion of aniline over different types of montmorillonite clays (K-10, K-20, K-30, Al-Pillared clay and untreated clay) has also been discussed. The activities of clay for the hydroamination of different aromatic and aliphatic amines have also been investigated. Under harsh reaction conditions (increased temperature and long reaction time) small amounts of di-addition products were observed. The kinetics data has been interpreted using the initial rate approach model.     

Synthesis, Structure, and Physical Studies of the New β-LiVOAsO4 Compound

Two new compounds of the A_xMOXO₄ family, β-LiVOAsO₄ and β-VOAsO₄, have been synthesized by solid state reaction and electrochemical lithium deintercalation from β-LiVOAsO₄, respectively. Both compounds are isostructural and are built like other β-VOXO₄ (X=S, P) by (VO₅)_∞ chains of distorted VO₆ octahedra connected via corner-shared AsO₄ tetrahedra. For β-LiVOAsO₄ the additional Li⁺ ions occupy chains of edge-shared octahedra running perpendicularly to the (VO₅)_∞ chains. The one-dimensional antiferromagnetic behavior suggested by the structure has been experimentaly confirmed. It is shown that lithium deintercalation occurs through a first-order transition at 4.02 V vs Li⁺/Li⁰. From chemical bond considerations it is shown why the redox potential of a given transition element M in a six-fold coordination involving (M=O)^m+ units lies between those observed in oxides and in M₂(XO₄)₃ compounds with (XO₄)ⁿ⁻ oxo anions (X=S, P, As).     

ααTwo new eudesmane sesquiterpenes from Lactuca sativa var. anagustata L

Two new eudesmane sesquiterpene lactones were isolated from the stalk of Lactuca sativa var.anagustata L and their structureswere elucidated by means of spectroscopic methods,including 2D NMR(~1H-~1H COSY,HMBC and NOESY) as 1β-O-β-D-glucopyranosyl-4α-hydroxyl-5α,6β,11βH-eudesma-12,6α-olide(1) and 1β-hydroxyl-15-O-(p-methoxyphenylacetyl)-5α,6β,11βH-eudesma-3-en-12,6α-olide(2).     

Synthesis of new enantiomerically pure N-methyl-N-arylsulfonyl-α-aminonitriles from amino acids

New enantiomerically pure N-methyl-N-arylsulfonyl-α-aminonitriles were prepared starting from the corresponding α-amino acids by way of N-methyl-N-arylsulfonyl-α-amino amides. The key step of this sequence consists of the dehydration of amides by thionyl chloride which proceeded without a significant racemization. Enantiomeric purity of nitriles was determined by HPLC analysis.     

Preparation and hydrogen permeation of SrCe0.95Y0.05O3−δ asymmetrical membranes

Asymmetrical thin membranes of SrCe_0.95Y_0.05O_3−δ (SCY) were prepared by a conventional and cost-effective dry pressing method. The substrate consisted of SCY, NiO and soluble starch (SS), and the top layer was the SCY. NiO was used as a pore former and soluble starch was used to control the shrinkage of the substrate to match that of the top layer. Crack-free asymmetrical thin membranes with thicknesses of about 50 μm and grain sizes of 5–10 μm were successfully pressed on to the substrates. Hydrogen permeation fluxes (J_H2) of these thin membranes were measured under different operating conditions. At 950 °C, J_H2 of the 50 μm SCY asymmetrical membrane towards a mixture of 80% H₂/He was as high as 7.6 × 10⁻⁸ mol/cm² s, which was about 7 times higher than that of the symmetrical membranes with a thickness of about 620 μm. The hydrogen permeation properties of SCY asymmetrical membranes were investigated and activation energies for hydrogen permeation fluxes were calculated. The slope of the relationship between the hydrogen permeation fluxes and the thickness of the membranes was −0.72, indicating that permeation in SCY asymmetric membranes was controlled by both bulk diffusion and surface reaction in the range investigated.     

Selective hydrogenation of o-chloronitrobenzene (o-CNB) over supported Pt and Pd catalysts obtained by laser vaporization deposition of bulk metals

Carbon nanotubes (CNTs), γ-alumina (γ-Al₂O₃) and silica (SiO₂) supported Pt and Pd catalysts were produced by laser vaporization deposition of respective bulk metals. The catalysts were characterized by inductive coupled plasma emission spectrometer (ICP), X-ray photoelectron spectroscopy (XPS) and transmission electron microscopy (TEM). The catalytic properties of the catalysts were investigated in the liquid phase hydrogenation of o-chloronitrobenzene (o-CNB) to o-chloroaniline (o-CAN) under 333 K and 1.0 MPa hydrogen pressure. The results show that the catalytic properties are greatly affected by the supports. Pt/CNTs catalyst exhibits the best catalytic performance among the Pt-based catalysts, producing o-CAN with 99.6% selectivity at complete conversion. Pd/CNTs catalyst exhibits the best catalytic performance among the Pd-based catalysts, giving o-CAN with 95.2% selectivity at complete conversion. For Pt-based catalysts, geometric effect and the textures and properties of the supports play important roles on catalytic properties. On the other hand, geometric effect, electronic effect and the textures and properties of the supports simultaneously influence the catalytic properties of the Pd-based catalysts. In addition, hydrogenolysis of the C–Cl bond can be well inhibited over all catalysts prepared by laser vaporization deposition.     

The structure and dynamic properties of mixed adsorption and penetration layers of α-dipalmitoylphosphatidylcholine/β-lactoglobulin at water/fluid interfaces

The interfacial tensions of mixed α-dipalmitoylphosphatidylcholine (DPPC)/β-lactoglobulin layers at the chloroform/water interface have been measured by the pendent drop and drop volume techniques. In certain intervals, the adsorption kinetics of these mixed layers was strongly influenced by the concentrations of both protein and DPPC. However, at low protein concentration, C_{β-lactoglobulin}=0.1 mg l⁻¹, the adsorption rate of mixed interfacial layers was mainly controlled by the variation of the DPPC concentration. As C_{β-lactoglobulin} was increased to 0.8 mg l⁻¹, the interfacial activity was abruptly increased, and within the concentration range of C_DPPC=10⁻⁴–10⁻⁵ mol l⁻¹, the DPPC has very little effect on the whole adsorption process. In this case, the adsorption rate of mixed layers was mainly dominated by the protein adsorption. This phenomenon also happened as the protein concentration was further increased to 3.6 mg l⁻¹. When C_DPPC>3 · 10^–5 mol l⁻¹, the adsorption behaviour was very similar to that of the pure DPPC although the protein concentration was changed. The equilibrium interfacial tensions of the mixed layers are dramatically effected by the lipid as compared to the pure protein adsorption at the same concentration. It reveals the estimation of which composition of lipid and protein decreases the interfacial tension. The combination of Brewster angle microscopy (BAM) with a conventional LB trough was applied to investigate the morphology of the mixed DPPC/β-lactoglobulin layers at the air/water interface. The mixed insoluble monolayers were produced by spreading the lipid at the water surface and the protein adsorbed from the aqueous buffer subphase. The BAM images allow to visualise the protein penetration and distribution into the DPPC monolayer on compression of the complex film. It is shown that a homogeneous distribution of β-lactoglobulin in lipid layers preferentially happens in the liquid fluid state of the monolayer while the protein can be squeezed out at higher surface pressures.     

Study on dynamic interfacial tension of 3-dodecyloxy-2-hydroxypropyl trimethyl ammonium bromide at liquid/liquid interface

Dynamic interfacial tension between aqueous solutions of 3-dodecyloxy-2-hydroxypropyl trimethyl ammonium bromide (R₁₂HTAB) and n-hexane were measured using the spinning drop method. The effects of the R₁₂HTAB concentration (the concentration below the CMC) and temperature on the dynamic interfacial tension have been investigated; the reason of the change of dynamic interfacial tension with time has been discussed. The effective diffusion coefficient, D_a, and the adsorption barrier, _a, have been obtained from the experimental data using the extended Word–Tordai equation. The results show that the dynamic interfacial tension becomes smaller while _a becomes higher with increasing R₁₂HTAB concentration in the bulk aqueous phase. D_a decreases from 5.56 × 10⁻¹² m⁻² s⁻¹ to 0.87 × 10⁻¹² m⁻² s⁻¹ while _a increases from 5.41 kJ mol⁻¹ to 7.74 kJ mol⁻¹ with the increase of concentration in the bulk solution of R₁₂HTAB from 0.5 × 10⁻³ mol dm⁻³ to 4 × 10⁻³ mol dm⁻³. Change of temperature affects the adsorption rate through altering D_a and _a. The value of D_a increases from 5.56 × 10⁻¹² m⁻² s⁻¹ to 13.98 × 10⁻¹² m⁻² s⁻¹ while that of _a decreases from 5.41 kJ mol⁻¹ to 5.07 kJ mol⁻¹ with temperature ascending from 303 K to 323 K. The adsorption of surfactant from the bulk phase into the interface follows a mixed diffusion–activation mechanism, which has been discussed in the light of interaction between surfactant molecules, diffusion and thermo-motion of molecules.     

Ternary [Al2O3–electrolyte–Cu] species: EPR spectroscopy and surface complexation modeling

Cu²⁺ binding on γ-Al₂O₃ is modulated by common electrolyte ions such as Mg²⁺, , and in a complex manner: (a) At high concentrations of electrolyte ions, Cu²⁺ uptake by γ-Al₂O₃ is inhibited. This is partially due to bulk ionic strength effects and, mostly, due to direct competition between Mg²⁺ and Cu²⁺ ions for the SO⁻ surface sites of γ-Al₂O₃. (b) At low concentrations of electrolyte ions, Cu²⁺ uptake by γ-Al₂O₃ can be enhanced. This is due to synergistic coadsorption of Cu²⁺ and electrolyte anions, and _. This results in the formation of ternary surface species (SOH₂SO₄Cu)⁺, (SOH₂PO₄Cu), and (SOH₂HPO₄Cu)⁺ which enhance Cu²⁺ uptake at pH < 6. The effect of phosphate ions may be particularly strong resulting in a 100% Cu uptake by the oxide surface. (c) EPR spectroscopy shows that at pH  pH_PZC, Cu²⁺ coordinates to one SO⁻ group. Phosphate anions form stronger, binary or ternary, surface species than sulfate anions. At pH  pH_PZC Cu²⁺ may coordinate to two SO⁻ groups. At pH  pH_PZC electrolyte ions and are bridging one O-atom from the γ-Al₂O₃ surface and one Cu²⁺ ion forming ternary [γ-Al₂O₃/elecrolyte/Cu²⁺] species.     

Reactions of nickelocene with lithium and magnesium alkyls containing β-hydrogen atoms

The reaction of nickelocene with BrMgR, where R=CH₂CH(CH₃)C₆H₅, C₂H₅, (CH₂)₇CH₃ and CH₂CH₂CH₃, have been studied. It was found that the presence of β-hydrogen in R did not cause the total splitting of the carbon–nickel bond but alkylidynetrinickel clusters were formed. It is the first example of the synthesis of alkylidynetrinickel clusters (NiCp)₃CR′ from the organonickel species possessing β-hydrogen. Besides trinickel clusters, the following compounds were always formed in all the studied reactions: (NiCp)₄H₂, (NiCp)₆, CpNi(η³-C₅H₇) and (NiCp)₂(μ-C₅H₆). The structure of (NiCp)₃CCH(CH₃)Ph has been determined by a single-crystal X-ray diffraction study.