A review of transition metal‐based bifunctional oxygen electrocatalysts

Electrochemical energy storage and conversion devices play a key role in the development of clean, sustainable, and efficient energy systems to meet the sustainable growth of our society. However, challenging issues including the sluggish kinetics of oxygen electrode reactions involving the oxygen reduction reaction (ORR) and the oxygen evolution reaction (OER) are present, limiting the implementation of devices such as metal‐air batteries, water electrolyzers, and regenerative fuel cells. In this review, various monometallic and bimetallic transition metal oxides (TMOs) and hydroxides are summarized in terms of their application for ORR/OER, in which the merits and demerits of various precious metal and carbon‐based metal oxide materials are discussed, with requirements for better electrocatalysts and catalyst support being introduced as well. Following this, different approaches to improve catalytic activity such as the introduction of doping and defects, the manipulation of crystal facets, and the engineering of supports, compositions, and morphologies are summarized in which TMOs with improved ORR/OER catalytic activities can be synthesized, further improving the speed, stability, and polarization of electrochemical energy storage and conversion devices. Finally, perspectives into the improvement of performance and the better understanding of ORR/OER mechanisms for bifunctional electrocatalysts using in situ spectroscopic techniques and density functional theory calculations are also discussed.     

Facile one-step synthesis of Ru doped NiCoP nanoparticles as highly efficient electrocatalysts for oxygen evolution reaction

Transition metal phosphides (TMPs) as ever-evolving electrocatalytic materials have attracted increasing attention in water splitting reactions owing to their cost-effective, highly active and stable catalytic properties. This work presents a facile synthetic route to NiCoP nanoparticles with Ru dopants which function as highly efficient electrocatalysts for oxygen evolution reaction (OER) in alkaline media. The Ru dopants induced a high content of Ni and Co vacancies in NiCoP nanoparticles, and the more defective Ru doped NiCoP phase than undoped NiCoP ones led to a greater number of catalytically active sites and improved electrical conductivity after undergoing electrochemical activation. The Ru doped NiCoP catalyst exhibited high OER catalytic performance in alkaline media with a low overpotential of 281 mV at 10 mA cm⁻² and a Tafel slope of 42.7 mV dec⁻¹.     

Spin polarisation in dual catalysts for the oxygen evolution and reduction reactions

Strongly correlated catalysts can be understood from precise quantum approximations. Incorporating properly electronic correlations thus let’s define Spin rules in catalysis, opening a new door towards optimum compositions for the most important reactions for a sustainable future.     

一步法合成的FeOOH/黑磷纳米复合材料协同实现体系优异的析氧性能

通过水热法,在黑磷(BP)纳米片表面生长FeOOH纳米材料,制备出FeOOH/BP纳米复合材料。作为电化学析氧反应(OER)催化剂,该复合材料在20 mA·cm^-2时的过电位仅为191 mV,Tafel斜率为49.9 mV·dec^-1;在循环1 000圈后,过电位仅仅增加了3 mV,且循环过程中元素价态不变,表现出优秀的稳定性。纳米FeOOH负载于BP表面,客观上能隔断氧气对BP的氧化,保护BP的载流子传导性能。同时,生长的FeOOH颗粒尺度小,结晶性弱,这有利于丰富其活性位点,增大活性面积。     

Self-Assembled Two-Dimensional NiO/CeO2 Heterostructure Rich in Oxygen Vacancies as Efficient Bifunctional Electrocatalyst for Alkaline Hydrogen Evolution and Oxygen Evolution

The development of high-efficiency bifunctional electrocatalysts toward the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) in alkaline surroundings is essential and challenging for the large-scale generation of clean hydrogen. Herein, a novel self-assembled two-dimensional (2 D) NiO/CeO₂ heterostructure (HS) consisting of NiO and CeO₂ nanocrystals is prepared through a facile two-step approach, and utilized as an enhanced bifunctional electrocatalyst for the HER and OER under alkaline conditions. It is concluded that this 2 D NiO/CeO₂ HS, rich in oxygen vacancies, demonstrates attractive electrocatalytic properties for both the HER and OER in 1 m KOH, including low onset overpotential (η₁), η₁₀ and Tafel slope, excellent durability, as well as large active surface area. Therefore, the self-assembled 2 D NiO/CeO₂ HS is believed to be an efficient bifunctional electrocatalyst toward the HER and OER.     

电催化析氧反应过渡金属磷化物和硫化物催化剂研究进展（英文）

对化石能源的依赖所造成的环境污染和能源危机在全球引起了广泛的关注.氢能由于其高能量密度、低分子质量以及清洁无污染的优点,被认为是人类根本性解决能源与环境等全球性问题的理想替代能源.电解水是生产高纯度氢的重要方法,是现代清洁能源技术的重要组成部分.水电解由阴极析氢(HER)和阳极析氧(OER)两个半反应构成.对于HER反应,其反应是基于二电子转移过程,反应过程相对容易进行.相比于HER反应,OER反应涉及四电子转移及氧-氧键形成,其反应动力学缓慢,是影响水电解效率的主要原因.因此,为了提高电解水制氢的能量转化效率,发展OER电催化剂成为水电解制氢技术的关键.在过去的十余年间,硫化物、硒化物、磷化物、硼化物等非贵金属基OER电催化剂被大量地研究及报道并取得了长足发展.在这些催化剂中,金属磷化物和硫化物不仅具有成本优势,而且在析氧过电位、耐久性方面正趋接近甚至超越RuO_2和IrO_2等贵金属催化剂,颇具应用潜力.本文总结磷化物和硫化物作为OER电催化剂的研究进展,重点介绍了磷化物和硫化物性能提升策略及其在OER过程中催化反应活性位的变化.本文首先介绍了电解水析氧反应在不同电解质中的反应机理,讨论了析氧反应在动力学和热力学过程的主要障碍.通过对大量文献的归纳,本文分别综述了磷化物和硫化物的化学性质、合成方法和催化性能,介绍了近年来磷化物和硫化物的重要研究进展.通过分析催化剂导电性、质子传输、活性面积、界面化学等因素对催化析氧反应的影响,总结了磷化物和硫化物电催化OER性能提升的策略.由于磷化物和硫化物在OER强氧化条件下,电催化剂表面的成分、物相及结构均会发生显著变化,进而催化反应活性位也会发生相应改变.本文综述了磷化物和硫化物在OER反应过程前后表面组分的变化,探讨了磷化物和硫化物作为OER电催化剂的活性组分,为进一步提高磷化物和硫化物的电催化析氧反应性能提供了崭新的思路.     

NiFe水滑石纳米片阵列负载Ru用于提升碱性电催化析氢和析氧性能

通过离子交换的方式将Ru负载到NiFe水滑石（LDH）纳米阵列表面得到（Ru/NiFe LDH）,Ru的引入显著提升了NiFe LDH的活性比表面积,暴露了更多的活性位点,同时调控了其电子结构,大大提升了其本征催化活性。在碱性条件下,催化析氢反应时仅需50 mV的过电位即可达到10 mA·cm^-2的电流密度,Tafel斜率为52.3 mV·dec^-1。而相同条件下原始NiFe LDH达到10mA·cm^-2的电流密度则需要226 mV的过电位,Tafel斜率为157.5 mV·dec^-1。同时制备的Ru/NiFe LDH也展现出了良好的析氧催化活性,在50 mA·cm^-2的电流密度下,过电位仅为231 mV,而NiFe LDH则需237 mV。Ru/NiFe LDH在长时间的电催化条件下依然能保持良好的工作稳定性。     

NiFe水滑石纳米片阵列负载Ru用于提升碱性电催化析氢和析氧性能

通过离子交换的方式将Ru负载到NiFe水滑石(LDH)纳米阵列表面得到(Ru/NiFe LDH),Ru的引入显著提升了NiFe LDH的活性比表面积,暴露了更多的活性位点,同时调控了其电子结构,大大提升了其本征催化活性。在碱性条件下,催化析氢反应时仅需50 mV的过电位即可达到10 mA·cm^-2的电流密度,Tafel斜率为52.3 mV·dec^-1。而相同条件下原始NiFe LDH达到10mA·cm^-2的电流密度则需要226 mV的过电位,Tafel斜率为157.5 mV·dec^-1。同时制备的Ru/NiFe LDH也展现出了良好的析氧催化活性,在50 mA·cm^-2的电流密度下,过电位仅为231 mV,而NiFe LDH则需237 mV。Ru/NiFe LDH在长时间的电催化条件下依然能保持良好的工作稳定性。     

氧空位和磷掺杂协同增强铁钴基材料电解水催化性能

为了研发高效、稳定的电解水催化剂,我们以氧空位和磷掺杂为基础,通过原位浸泡生长和两步热处理的方法,在泡沫铁上合成具有氧空位和磷掺杂的纳米花结构作为析氢反应(HER)和析氧反应(OER)双功能电催化剂。CoFe₂O₄已被报道为一种很有前途的OER和氧还原反应(ORR)电催化剂,然而CoFe₂O₄在HER中表现出电导率差、电催化反应慢的特性。CoFe₂O₄中氧空位(Ov)的形成可以有效调控催化剂表面的电子结构,有助于产生更多的缺陷和空位,从而提高OER的活性。随后,引入磷原子填充在空位中,制备的P-Ov-CoFe₂O₄/IF在碱性电催化测试中展现出优异的HER和OER性能,在10 mA·cm^-2电流密度下HER和OER过电位仅为54和191 mV,Tafel斜率分别为57和54 mV·dec^-1,并具有良好的循环稳定性。     

MoSe2/Co-MOF/NF复合材料的制备及电催化产氧性能

设计高效的催化剂对于电解水制氢至关重要。基于过渡金属硒化物(TMSe)的高催化活性和金属有机骨架(MOFs)的灵活结构,我们提出了一种将MOFs与TMSe复合的策略,在导电基底泡沫镍(NF)上生长的复合材料不仅继承了2种单体的优点,还有效地改善了MOFs导电性差、TMSe易团聚的缺点。MoSe₂/Co-MOF/NF在碱性溶液中展示出优异的电催化产氧活性,在电流密度为10 mA·cm^-2时其过电位仅为242 mV,塔菲尔斜率仅为50.64 mV·dec^-1。此外,该材料在碱性溶液中经1 000圈循环伏安(CV)循环测试和30 h的恒电压电解测试均表现出良好的稳定性。     

MoSe2/Co-MOF/NF复合材料的制备及电催化产氧性能

设计高效的催化剂对于电解水制氢至关重要。基于过渡金属硒化物(TMSe)的高催化活性和金属有机骨架(MOFs)的灵活结构,我们提出了一种将MOFs与TMSe复合的策略,在导电基底泡沫镍(NF)上生长的复合材料不仅继承了2种单体的优点,还有效地改善了MOFs导电性差、TMSe易团聚的缺点。MoSe₂/Co-MOF/NF在碱性溶液中展示出优异的电催化产氧活性,在电流密度为10 mA·cm^-2时其过电位仅为242 mV,塔菲尔斜率仅为50.64 mV·dec^-1。此外,该材料在碱性溶液中经1 000圈循环伏安(CV)循环测试和30 h的恒电压电解测试均表现出良好的稳定性。     

溶剂热法制备磷掺杂碳纳米管作为氧气还原和氧气析出反应双功能电催化剂的研究

对氧气还原(ORR)和氧气析出(OER)反应都具有催化活性的双功能催化剂在金属-空气电池中起着关键作用.本文通过溶剂热反应,一步原位合成了磷掺杂碳纳米管(P-CNT).旋转环盘电极测试表明磷掺杂能够明显提高碳纳米管的催化活性,P-CNT在碱性电解质中对ORR和OER都具有优异的催化活性.P-CNT对ORR的催化还原为近4电子反应,可与商业催化剂Pt/C(20 wt%)相比;而其对OER的催化活性则高于Pt/C(20 wt%).此外,P-CNT的长期稳定性优于Pt/C(20 wt%).P-CNT对ORR和OER的高催化活性和稳定性主要归因于磷对碳的掺杂以及磷与碳间强的化学键合.     

光催化制氢中助催化剂表面氢氧复合反应的抑制

在光催化分解水产氢的过程中,Pt等助催化剂在催化产生氢的同时也会诱导催化氢气和氧气重新复合为水的逆反应,严重降低了悬浮体系光催化全分解水产氢的效率。本文综述了近年来在逆反应抑制方面的研究进展,总结和对比分析了各种抑制逆反应策略的特点,并对这些方法的应用于悬浮体系光催化全分解水制氢的前景进行了展望。     

Synthesis of dual-doped non-precious metal electrocatalysts and their electrocatalytic activity for oxygen reduction reaction

The pyrolyzed carbon supported ferrum polypyrrole(Fe-N/C) catalysts are synthesized with or without selected dopants, p-toluenesulfonic acid(TsOH), by a facile thermal annealing approach at desired temperature for optimizing their activity for the oxygen reduction reaction(ORR) in O2-saturated 0.1 mol/L KOH solution. The electrochemical techniques such as cyclic voltammetry(CV) and rotating disk electrode(RDE) are employed with the Koutecky-Levich theory to quantitatively obtain the ORR kinetic constants and the reaction mechanisms. It is found that catalysts doped with TsOH show significantly improved ORR activity relative to the TsOH-free one. The average electron transfer numbers for the catalyzed ORR are determined to be 3.899 and 3.098, respectively, for the catalysts with and without TsOH-doping. The heat-treatment is found to be a necessary step for catalyst activity improvement, and the catalyst pyrolyzed at 600℃ gives the best ORR activity. An onset potential and the potential at the current density of-1.5 mA/cm2 for TsOH-doped catalyst after pyrolysis are 30 mV and 170 mV, which are more positive than those without pyrolized. Furthermore, the catalyst doped with TsOH shows higher tolerance to methanol compared with commercial Pt/C catalyst in 0.1 mol/L KOH. To understand this TsOH doping and pyrolyzed effect, X-ray diffraction(XRD), scanning electron microscope(SEM) and X-ray photoelectron spectroscopy(XPS) are used to characterize these catalysts in terms of their structure and composition. XPS results indicate that the pyrrolic-N groups are the most active sites, a finding that is supported by the correspondence between changes in pyridinic-N content and ORR activity that occur with changing temperature. Sulfur species are also structurally bound to carbon in the forms of C–Sn–C, an additional beneficial factor for the ORR.     

Synthesis of dual-doped non-precious metal electrocatalysts and their electrocatalytic activity for oxygen reduction reaction

The pyrolyzed carbon supported ferrum polypyrrole(Fe-N/C) catalysts are synthesized with or without selected dopants, p-toluenesulfonic acid(TsOH), by a facile thermal annealing approach at desired temperature for optimizing their activity for the oxygen reduction reaction(ORR) in O2-saturated 0.1 mol/L KOH solution. The electrochemical techniques such as cyclic voltammetry(CV) and rotating disk electrode(RDE) are employed with the Koutecky-Levich theory to quantitatively obtain the ORR kinetic constants and the reaction mechanisms. It is found that catalysts doped with TsOH show significantly improved ORR activity relative to the TsOH-free one. The average electron transfer numbers for the catalyzed ORR are determined to be 3.899 and 3.098, respectively, for the catalysts with and without TsOH-doping. The heat-treatment is found to be a necessary step for catalyst activity improvement, and the catalyst pyrolyzed at 600℃ gives the best ORR activity. An onset potential and the potential at the current density of-1.5 mA/cm2 for TsOH-doped catalyst after pyrolysis are 30 mV and 170 mV, which are more positive than those without pyrolized. Furthermore, the catalyst doped with TsOH shows higher tolerance to methanol compared with commercial Pt/C catalyst in 0.1 mol/L KOH. To understand this TsOH doping and pyrolyzed effect, X-ray diffraction(XRD), scanning electron microscope(SEM) and X-ray photoelectron spectroscopy(XPS) are used to characterize these catalysts in terms of their structure and composition. XPS results indicate that the pyrrolic-N groups are the most active sites, a finding that is supported by the correspondence between changes in pyridinic-N content and ORR activity that occur with changing temperature. Sulfur species are also structurally bound to carbon in the forms of C–Sn–C, an additional beneficial factor for the ORR.     

NiMoO4纳米线@ZnCo MOF(350)核壳结构复合材料的制备及其析氧电催化性能

采用液相合成法成功合成了一种新型的ZnCo金属有机骨架（MOF）纳米晶原位生长于NiMoO₄纳米线（NWs）表面的复合材料NiMoO₄ NWs@ZnCo MOF。经350 ℃低温热处理（所得产物命名为NiMoO₄ NWs@ZnCo MOF（350））后,仍旧较好地保持了前驱体的结构和形貌,但在ZnCo MOF内部出现了极少量的Co₃O₄相,证明发生了轻微热解。化学键C—O—Mo和相异质界面处产生的大量氧空位可以成为活性位点的来源。新的Co₃O₄相的形成也导致异相界面的进一步增加。此外,少量的热解使核壳结构表面更加粗糙、疏松和多孔,产生更高的比表面积、更快的离子扩散路径和更好的导电性。因此经惰性玻碳电极测试,在10 mA·cm^-2电流密度下电催化剂表现出360 mV的低过电位,并保持了30 000 s的长期催化稳定性。     

硼、磷共掺杂铁钴双金属材料的制备及其电催化析氧性能

采用一步水热法合成了硼、磷共掺杂铁钴材料(Fe-Co-B-P)。借助扫描电子显微镜(SEM)、X射线衍射(XRD)、X射线光电子能谱(XPS)、傅里叶变换红外光谱(FT-IR)等技术对所合成材料的形貌、结构和组成进行表征。利用线性扫描伏安(LSV)、循环伏安(CV)、电化学阻抗谱(EIS)等技术研究材料电化学析氧反应(OER)性能。结果表明,Fe-Co-B-P表面疏松且粗糙,颗粒间有许多空隙。在电流密度为10和100 mA·cm^-2时,其过电势分别为278和309 mV,Tafel斜率为24 mV·dec^-1,说明该材料具有较优的电催化析氧性能。其在连续进行10 h的计时电位测试过程中,电势基本保持在1.55 V (vs RHE),表明该催化剂具有较好的电化学稳定性。这是由于铁钴双金属与硼、磷非金属之间的协同作用促进了电子的传递。     

硼、磷共掺杂铁钴双金属材料的制备及其电催化析氧性能

采用一步水热法合成了硼、磷共掺杂铁钴材料(Fe-Co-B-P)。借助扫描电子显微镜(SEM)、X射线衍射(XRD)、X射线光电子能谱(XPS)、傅里叶变换红外光谱(FT-IR)等技术对所合成材料的形貌、结构和组成进行表征。利用线性扫描伏安(LSV)、循环伏安(CV)、电化学阻抗谱(EIS)等技术研究材料电化学析氧反应(OER)性能。结果表明,Fe-Co-B-P表面疏松且粗糙,颗粒间有许多空隙。在电流密度为10和100 mA·cm^-2时,其过电势分别为278和309 mV,Tafel斜率为24 mV·dec^-1,说明该材料具有较优的电催化析氧性能。其在连续进行10 h的计时电位测试过程中,电势基本保持在1.55 V(vs RHE),表明该催化剂具有较好的电化学稳定性。这是由于铁钴双金属与硼、磷非金属之间的协同作用促进了电子的传递。     

CuCo2O4/NiFe层状双金属氢氧化物核壳纳米花球阵列的高效析氧反应

采用界面工程策略在泡沫镍(NF)上制备了CuCo₂O₄/NiFe层状双金属氢氧化物(LDH)(CuCo₂O₄/NiFe-LDH@NF)核壳纳米花球阵列。研究表明,电子通过CuCo₂O₄和NiFe-LDH耦合界面发生转移,导致核心CuCo₂O₄处于富电子状态,从而提高了反应速率。非晶态NiFe-LDH外壳不仅为电子/物质提供更多的传输通道和增加活性位点。同时,还能在电催化析氧反应(OER)中保护核心CuCo₂O₄免受强碱腐蚀。因此,在1.0 mol·L^-1 KOH溶液中,将CuCo₂O₄/NiFe-LDH@NF用作OER催化剂时,仅需191mV的低过电位即可实现10 mA·cm^-2的电流密度和31 mV·dec^-1的低Tafel斜率。此外,CuCo₂O₄/NiFe-LDH@NF在长时间的工作中能够保证催化性能、晶体结构、形貌结构和组成的稳定。