Thermodynamic Properties of Ternary Ionic Liquid Mixture Containing a Common Ion: Excess Molar Volumes,Excess Isentropic Compressibilities,Excess Molar Enthalpies and Excess Heat Capacities

In the present investigations, the excess molar volumes, \( V_{ijk}^{\text{E}} \), excess isentropic compressibilities, \( \left( {\kappa_{S}^{\text{E}} } \right)_{ijk} \), and excess heat capacities, \( \left( {C_{p}^{\text{E}} } \right)_{ijk} \), for ternary 1-butyl-2,3-dimethylimidazolium tetrafluoroborate (i) + 1-butyl-3-methylimidazolium tetrafluoroborate (j) + 1-ethyl-3-methylimidazolium tetrafluoroborate (k) mixture at (293.15, 298.15, 303.15 and 308.15) K and excess molar enthalpies, \( \left( {H^{\text{E}} } \right)_{ijk} \), of the same mixture at 298.15 K have been determined over entire composition range of x _i and x _j . Satisfactorily corrections for the excess properties \( V_{ijk}^{\text{E}} \), \( \left( {\kappa_{S}^{\text{E}} } \right)_{ijk} \), \( \left( {H^{\text{E}} } \right)_{ijk} \) and \( \left( {C_{p}^{\text{E}} } \right)_{ijk} \) have been obtained by fitting with the Redlich–Kister equation, and ternary adjustable parameters along with standard errors have also been estimated. The \( V_{ijk}^{\text{E}} \), \( \left( {\kappa_{S}^{\text{E}} } \right)_{ijk} \), \( \left( {H^{\text{E}} } \right)_{ijk} \) and \( \left( {C_{p}^{\text{E}} } \right)_{ijk} \) data have been further analyzed in terms of Graph Theory that deals with the topology of the molecules. It has also been observed that Graph Theory describes well \( V_{ijk}^{\text{E}} \), \( \left( {\kappa_{S}^{\text{E}} } \right)_{ijk} \), \( \left( {H^{\text{E}} } \right)_{ijk} \) and \( \left( {C_{p}^{\text{E}} } \right)_{ijk} \) values of the ternary mixture comprised of ionic liquids.     

Densities and Speeds of Sound of Binary Liquid Mixtures of 1,4-Butanediol with 2-Methoxyethanol and 2-Propoxyethanol at <Emphasis Type="Italic">T</Emphasis> = (303.15, 308.15, 313.15 and 318.15) K

Densities, ρ, and speeds of sound, u, for the binary liquid mixtures of 1,4-butanediol (1,4-BD) + 2-alkoxyethanols {2-methoxyethanol (2-ME), or 2-propoxyethanol (2-PE)} over the whole composition range have been measured at T = (303.15, 308.15, 313.15 and 318.15) K, and at atmospheric pressure (p = 0.1 kPa). Experimental data for the densities and speeds of sound have been used to derive the quantities like excess molar volume, \( V_{\text{m}}^{\text{E}} \), excess isentropic compressibility, \( \kappa_{S}^{\text{E}} \), excess molar isentropic compressibility, \( K_{{S,{\text{m}}}}^{\text{E}} \), excess speed of sound, \( u^{\text{E}} \), and excess isobaric thermal expansion \( \alpha_{p}^{\text{E}} \). These excess parameters were correlated by Redlich–Kister polynomials. Excess partial molar volumes (\( \bar{V}_{\text{m,1}}^{\text{E}} \) and \( \bar{V}_{\text{m,2}}^{\text{E}} \)) and their limiting values at infinite dilution (\( \bar{V}_{\text{m,1}}^{{ 0 {\text{E}}}} \) and \( {\bar{\text{V}}}_{\text{m,2}}^{{ 0 {\text{E}}}} \)) have been calculated from the experimental density measurements and were analytically obtained using the Redlich–Kister polynomials. The results are discussed in terms of intermolecular interactions and their dependence on composition and temperature.     

The Study of Solute–Solvent Interactions in 1-Butyl-3-Methylimidazolium Hexafluorophosphate + 2-Pyrrolidone from Volumetric,Acoustic, Optical and Spectral Properties

The density (ρ), speed of sound (u) and refractive index (n_D) of [Bmim][PF₆], 2-pyrrolidone and their binary mixtures were measured over the whole composition range as a function of temperature between (303.15 and 323.15)?K at atmospheric pressure. Experimental values were used to calculate the excess molar volumes \( \left( {V_{m}^{\text{E}} } \right) \), excess partial molar volumes \( \left( {\overline{V}_{m}^{\text{E}} } \right) \), partial molar volumes at infinite dilution \( \left( {\overline{V}_{m}^{{{\text{E}},\infty }} } \right) \), excess values of isentropic compressibility \( \left( {\kappa_{S}^{\text{E}} } \right) \), free length \( \left( {L_{\text{f}}^{\text{E}} } \right) \) and speeds of sound \( \left( {u^{\text{E}} } \right) \) for the binary mixtures. The calculated properties are discussed in terms of molecular interactions between the components of the mixtures. The results reveal that interactions between unlike molecules take place, particularly through intermolecular hydrogen bond formation between the C₂–H of [Bmim][PF₆] and the carbonyl group of pyrrolidin-2-one. An excellent correlation between thermodynamic and IR spectroscopic measurements was observed. The observations were further supported by the Prigogine–Flory–Patterson (PFP) theory of excess molar volume.     

Thermo Physical and Spectroscopic Properties of Binary Liquid Systems: Ethanoic Acid/Propanoic Acid/Butanoic Acid with 2-Methylaniline

Densities (ρ), speeds of sound (u), and viscosities (η) are reported for binary mixtures of 2-methylaniline with carboxylic acids (ethanoic acid, propanoic acid and butanoic acid) over the entire composition range of mole fraction at T?=?(303.15–318.15) K and at atmospheric pressure (0.1 MPa). The excess properties such as excess molar volume (V _m ^E ), excess isentropic compressibility (κ _S ^E ) and excess Gibbs energy of activation of viscous flow (G^*E) are calculated from the experimental densities, speeds of sound and viscosities. Excess properties are correlated using the Redlich–Kister polynomial equation. The partial molar volumes, \( \bar{V}_{\text{m,1}} \) and \( \bar{V}_{\text{m,2}} \), partial molar isentropic compressibilities, \( \bar{K}_{\text{s,m,1}} \) and \( \bar{K}_{\text{s,m,2}} \), excess partial molar volumes, \( \bar{V}_{\text{m,1}}^{\text{E}} \) and \( \bar{V}_{\text{m,2}}^{\text{E}} \), and excess partial molar isentropic compressibilities, \( \bar{K}_{\text{s,m,1}}^{\text{E}} \) and \( \bar{K}_{\text{s,m,2}}^{\text{E}} \), over whole composition range, partial molar volumes, \( \bar{V}_{\text{m,1}}^{ \circ } \) and \( \bar{V}_{\text{m,2}}^{ \circ } \), partial molar isentropic compressibilities, \( \bar{K}_{\text{s,m,1}}^{ \circ } \) and \( \bar{K}_{\text{s,m,2}}^{ \circ } \), excess partial molar volumes, \( \bar{V}_{\text{m,1}}^{{ \circ {\text{E}}}} \) and \( \bar{V}_{{{\text{m}},2}}^{{ \circ {\text{E}}}} \), and excess partial molar isentropic compressibilities, \( \bar{K}_{\text{s,m,1}}^{{ \circ {\text{E}}}} \) and \( \bar{K}_{\text{s,m,2}}^{{ \circ {\text{E}}}} \), of the components at infinite dilution have also been calculated from the analytically obtained Redlich–Kister polynomials. The excess molar volume V^E results are analyzed using the Prigogine–Flory–Patterson theory. Analysis of each of the three contributions viz. interactional V^E(int.), free volume V^E(fv.) and characteristic pressure p* to V^E showed that the interactional contributions are positive for all systems while the free volume and characteristic pressure p* contributions are negative for all the binary mixtures. The results are analyzed in terms of attractive forces between 2-methylaniline and carboxylic acids molecules. Good agreement is obtained between excess quantities and spectroscopic data.     

Imidazolium-Based Ionic Liquids Containing the Trifluoroacetate Anion: Thermodynamic Study

New experimental vapor pressures and vaporization enthalpies of the ionic liquids \( [ {\text{C}}_{2} {\text{mim][CF}}_{3} {\text{CO}}_{2} ] \) and \( [ {\text{C}}_{4} {\text{mim][CF}}_{3} {\text{CO}}_{2} ] \) have been measured by the QCM method. The solution enthalpies of these ionic liquids were measured by using high-precision solution calorimetry and were used for calculation the aqueous enthalpy of formation \( \Delta_{\text{f}} H_{\text{m}}^{ \circ } ({\text{CF}}_{ 3} {\text{CO}}_{2}^{ - } ,_{{}} {\text{aq}}) \) of the anion for combination with quantum-chemical results. The solubility parameters of the ILs under study have been derived from experimental \( \Delta_{\text{l}}^{\text{g}} H_{\text{m}}^{ \circ } \)(298.15 K) values and were used for estimation of miscibility of some common solutes with \( [ {\text{C}}_{n} {\text{mim][CF}}_{3} {\text{CO}}_{2} ] \).     

Thermochemical Properties of Dissolution of Nicotinic Acid C<Subscript>6</Subscript>H<Subscript>5</Subscript>NO<Subscript>2</Subscript>(s) in Aqueous Solution

Nicotinic acid (also known as niacin) was recrystallized from anhydrous ethanol. X-ray crystallography was applied to characterize its crystal structure. The crystal belongs to the monoclinic system, space group P2₍₁₎/c. The crystal cell parameters are a = 0.71401(4) nm, b = 1.16195(7) nm, c = 0.71974(6) nm, α = 90°, β = 113.514(3)°, γ = 90° and Z = 4. Molar enthalpies of dissolution of the compound, at different molalities m/(mol·kg^?1) were measured with an isoperibol solution–reaction calorimeter at T = 298.15 K. The molar enthalpy of solution at infinite dilution was calculated, according to Pitzer’s electrolyte solution model and found to be \( \Delta_{\text{sol}} H_{m}^{\infty } = ( 2 7. 3 \pm 0. 2) \) kJ·mol^?1 and Pitzer’s parameters (\( \beta_{{\text{MX}}}^{{\text{(0)}L}} \), \( \beta_{{\text{MX}}}^{{\text{(1)}L}} \) and \( C_{{\text{MX}}}^{\phi L} \)) were obtained. The values of apparent relative molar enthalpies (\( {}^{\phi }L \)) and relative partial molar enthalpies (\( \overline{{L_{2} }} \) and \( \overline{{L_{1} }} \)) of the solute and the solvent at different molalities were derived from the experimental enthalpy of dissolution values of the compound. Also, the standard molar enthalpy of formation of the anion \( {\text{C}}_{ 6} {\text{H}}_{ 4} \text{NO}_{2}^{-} \) in aqueous solution was calculated to be \( {\Delta_{\text{f}}^{} H}_{\text{m}}^{\text{o}} ({\text{C}}_{ 6} {\text{H}}_{ 4} {\text{NO}}_{2}^{-} \text{,aq}) = - \left( {603.2 \pm 1.2} \right)\;{\text{kJ}}{\cdot}{\text{mol}}^{-1} \).     

Solvent extraction of calcium and strontium into nitrobenzene by using synergistic mixture of hydrogen dicarbollylcobaltate and diphenyl-<Emphasis Type="Italic">N</Emphasis>-butylcarbamoylmethyl phosphine oxide

Extraction of microamounts of calcium and strontium by a nitrobenzene solution of hydrogen dicarbollylcobaltate (H⁺B^?) in the presence of diphenyl-N-butylcarbamoylmethyl phosphine oxide (DPBCMPO, L) has been investigated. The equilibrium data have been explained assuming that the species HL⁺, \( {\text{HL}}_{2}^{ + } \), \( {\text{ML}}_{2}^{2 + } \), \( {\text{ML}}_{3}^{2 + } \) and \( {\text{ML}}_{4}^{2 + } \) (M²⁺ = Ca²⁺, Sr²⁺) are extracted into the organic phase. The values of extraction and stability constants of the cationic complexes in nitrobenzene saturated with water have been determined. In the considered nitrobenzene medium, it was found that the stability of the \( {\text{SrL}}_{2,{\text{org}}}^{2 + } \) complex is somewhat higher than that of species \( {\text{CaL}}_{2,{\text{org}}}^{2 + } \), while the stability constants of the remaining strontium complexes \( {\text{SrL}}_{3,{\text{org}}}^{2 + } \) and \( {\text{SrL}}_{4,{\text{org}}}^{2 + } \) are smaller than those of the corresponding complex species \( {\text{CaL}}_{n}^{2 + } \) (n = 3, 4).     

The Partial Molar Isothermal Compressions of the Nucleosides Adenosine,Cytidine, and Uridine in Aqueous Solution at <Emphasis Type="Italic">T</Emphasis> = (288.15 and 313.15) K

Sound speeds have been measured for aqueous solutions of the nucleosides adenosine, cytidine, and uridine at T = (288.15 and 313.15) K and at ambient pressure. The partial molar isentropic compressions at infinite dilution, \( K_{S,2}^{\text{o}} \), were derived from the speed of sound data. The partial molar heat capacities at infinite dilution, \( C_{p,2}^{\text{o}} \), for the three nucleosides at T = (288.15 and 313.15) K were also determined. These \( K_{S,2}^{\text{o}} \) and \( C_{p,2}^{\text{o}} \) results, along with partial molar isobaric expansions at infinite dilution, \( E_{2}^{\text{o}} = \, (\partial V_{2}^{\text{o}} /\partial T)_{p} \), that were derived using data from the literature, were used to evaluate the partial molar isothermal compressions at infinite dilution, \( K_{T,2}^{\text{o}} \{ K_{T,2}^{\text{o}} = - \, (\partial V_{2}^{\text{o}} /\partial p)_{T} \} \), for the nucleosides. The \( K_{T,2}^{\text{o}} \) results were rationalized in terms of nucleoside hydration and its temperature dependence.     

Physico-chemical Investigation of Mixed Micelle Formation Between Tetradecyltrimethylammonium Bromide and Dodecyltrimethylammonium Chloride in Water and Aqueous Solutions of Sodium Chloride

Conductometric measurements have been employed to gain a detailed insight into the interactions between two cationic surfactants, tetradecyltrimethylammonium bromide (TTAB) and dodecyltrimethylammonium chloride (DTAC), in water and in an aqueous solution of sodium chloride. The experimental data were analyzed according to Rubingh’s model within the framework of the pseudophase separation model. The evaluated values of critical micelle concentration (cmc) were found to be lower than their corresponding cmc ^id values, signifying attractive interactions involving both components in the solutions. The micellar mole fractions (\( X_{1}^{\text{Rub}} \)) of TTAB evaluated by Rubingh’s model were always larger than the ideal values (\( X_{1}^{\text{id}} \)), signifying the higher involvement of TTAB in mixed micelles of TTAB and DTAC. Activity coefficients (\( f_{ 1}^{\text{Rub}} \) and \( f_{ 2}^{\text{Rub}} \)) were always below one in all cases signifying synergism in the mixed micelles. All the outcomes point to synergism and attractive interactions in the mixed systems. Values of excess Gibbs energy were evaluated by employing Rubingh’s model (\( \Delta G_{\text{ex}}^{\text{Rub}} \)) and the \( \Delta G_{\text{ex}}^{\text{Rub}} \) values obtained are negative. The values of \( \Delta H_{\text{m}}^{\text{o}} \) and \( \Delta S_{\text{m}}^{\text{o}} \) reveal that hydrophobic interaction is expected to be the binding force between TTAB and DTAC in aqueous media at lower temperatures, while both hydrophobic interactions as well as exothermic interactions are involved at higher temperatures. The interaction forces between the surfactants were found to be enhanced in the presence of NaCl.     

Additional Aspects of Complexation of Gold(I) with Thiomalate

Some equilibria involving gold(I) thiomalate (mercaptosuccinate, TM) complexes have been studied in the aqueous solution at 25 °C and I?=?0.2 mol·L^?1 (NaCl). In the acidic region, the oxidation of TM by \( {\text{AuCl}}_{4}^{ - } \) proceeds with the formation of sulfinic acid, and gold(III) is reduced to gold(I). The interaction of gold(I) with TM at n_TM/n_Au?≤?1 leads to the formation of highly stable cyclic polymeric complexes \( {\text{Au}}_{m} \left( {\text{TM}} \right)_{m}^{*} \) with various degrees of protonation depending on pH. In general, the results agree with the tetrameric form of this complex proposed in the literature. At n_TM/n_Au?>?1, the processes of opening the cyclic structure, depolymerization and the formation of \( {\text{Au}}\left( {\text{TM}} \right)_{2}^{*} \) occur: \( {\text{Au}}_{4} ( {\text{TM)}}_{4}^{8 - } + {\text{TM}}^{3 - } \rightleftharpoons {\text{Au}}_{ 4} ( {\text{TM)}}_{5}^{11 - } \), log₁₀ K₄₅?=?10.1?±?0.5; 0.25 \( {\text{Au}}_{4} ( {\text{TM)}}_{4}^{8 - } + {\text{TM}}^{3 - } \rightleftharpoons {\text{Au(TM)}}_{2}^{5 - } \), log₁₀ K₁₂?=?4.9?±?0.2. The standard potential of \( {\text{Au(TM)}}_{2}^{5 - } \) is \( E_{1/0}^{ \circ } = -0. 2 5 5\pm 0.0 30{\text{ V}} \). The numerous protonation processes of complexes at pH?<?7 were described with the use of effective functions.     

Dissociation Behavior of <Emphasis Type="SmallCaps">l</Emphasis>(+)-Lactic Acid in Aqueous Solutions of (1-Alkyl-4-methylpyridinium bromide + Poly (ethyleneglycol)) at <Emphasis Type="Italic">T</Emphasis> = (288.15–318.15) K

The effect of 1-alkyl-4-methylpyridinium based ionic liquids on the conductivity behavior of l(+)-lactic acid (LaH) was studied in Poly(ethylene glycol) (PEG) aqueous solutions. The molar conductivities of LaH in the aqueous solutions of PEG, (PEG + 1-hexyl-4-methylpyridinium bromide) and (PEG + 1-octyl-4-methylpyridinium bromide) were measured over the temperature ranges of 288.15–318.15 K. The molar conductivity data were analyzed by applying the Quint–Viallard (QV) conductivity equation to determine the limiting molar conductivities (Λ ⁰) and dissociation constants (\( K_{\text{D}} \)). The results show that the values of limiting molar conductivity increased as the temperature increased, which indicates that the dissociation process is endothermic. The \( K_{\text{D}} \) values were also used to calculate the dissociation standard thermodynamic functions (\( \Delta G_{\text{D}}^{0} \), \( \Delta S_{\text{D}}^{0} \) and \( \Delta H_{\text{D}}^{0} \)). The results revealed that the dissociation process of LaH is controlled by entropy at all temperatures.     

CN (<Emphasis Type="Italic">B</Emphasis><Superscript>2</Superscript>Σ<Superscript>+</Superscript> → <Emphasis Type="Italic">X</Emphasis><Superscript>2</Superscript>Σ<Superscript>+</Superscript>) Violet System in a Cold Atmospheric-Pressure Argon Plasma Jet

\( {\text{CN}} (B^{2}\Sigma ^{ + } \to X^{2}\Sigma ^{ + } ) \) violet system was investigated using optical emission spectroscopy in a non-equilibrium microwave atmospheric-pressure plasma jet in argon expanding in air. From the analysis of the emission spectra of the discharge in the range of 380 and 400 nm, the violet system of CN was found to be overlapped with the \( {\text{N}}_{2}^{ + } \left( {B^{2}\Sigma _{u}^{ + } , v = 1 \to X^{2}\Sigma _{g}^{ + } , v = 1} \right) \) and \( {\text{N}}_{2} \left( {C^{3}\Pi _{u} \to B^{3}\Pi _{g} } \right) \) bands, sequence \( \Delta \upsilon = - \;3 \). A numerical disentangle technique, developed in this work, permitted to obtain a well resolved violet system from the different systems observed, namely the nitrogen First Negative and the Second Positive systems. The \( {\text{CN}} (B^{2}\Sigma ^{ + } \to X^{2}\Sigma ^{ + } ) \) band head intensity was determined and analysed as function of discharge powers between 30 and 150 W and fluxes between 2.5 and 10.0 slm. With aid of this numerical approach it was also possible to obtain the rotational temperature, from (1600 ± 100) to (2300 ± 100) K and vibrational temperature between (9000 ± 800) and (14,000 ± 800) K along the plasma jet. The kinetics of \( {\text{CN}} (B^{2}\Sigma ^{ + } ) \) state was analysed as well.     

Density and Viscosity of a Ternary $$ x_{1} $$ 1-He xene(1) + $$ x_{2} $$ x2 1-Octene(2) + (1 − − x2) 1-Decene(3) Mi xture at High Temperatures and High Pressures

The density and viscosity of a ternary 1-hexene(1) + 1-octene(2) +1-decene(3) mixture (\( w_{1} = w_{2} = w_{3} = 0.333 \) weight fractions or \( x_{1} = 0.4257 \),\( x_{2} = 0.3190 \), \( x_{3} = 0.2553 \) mole fractions of 1-hexene, 1-octene, and 1-decene, respectively) have been simultaneously measured over the temperature range from (298 to 471) K and at pressures up to 196 MPa using a combined method of hydrostatic weighing and falling-body techniques, respectively. The combined expanded uncertainties of the density, pressure, temperature, concentration, and viscosity measurements at the 95% confidence level with a coverage factor of k = 2 are estimated to be (0.15 to 0.30)%, 0.05%, 0.02 K, 0.005 mol%, and (1.5 to 2.0)%, respectively. The measured densities and viscosities were used to calculate the excess molar volumes and viscosity differences. The excess molar properties (\( G_{\text{m}}^{\text{E}} , \, H_{\text{m}}^{\text{E}} , \, S_{\text{m}}^{\text{E}} \) and \( C_{\text{pm}}^{\text{E}} \)) and their pressure derivatives as a function of temperature and pressure have been calculated using the derived excess molar volumes. The measured viscosities were used to develop a theoretically based viscosity correlation model (Arrhenius–Andrade type equation) for the mixture.     

Vibratio nal assig nme nts,co nformatio nal a nalysis,a nd molecular structures of $$\left[ {\text{C}_{\text{ n}} \text{mim}} \right]\left[ {\text{NTF}_{\text{2}} } \right]$$C nmimNTF2 ( n = 2, 4, 6, a nd 8) imidazolium-based io nic liquids: a combi ned experime ntal a nd qua ntum chemical approach

This work is aimed at providing physical insights about the interactions of cations, anion, and ion pairs of four imidazolium-based ionic liquids of \(\left[ {{\text{C}}_{\text{n}} {\text{mim}}} \right]\left[ {{\text{NTF}}_{2} } \right]\) with varying alkyl chain lengths (n = 2, 4, 6, and 8) using both DFT calculations and vibrational spectroscopic measurements (IR absorption and Raman scattering) in the mid- and far regions. The calculated Mulliken charge distributions of \(\left[ {{\text{C}}_{\text{n}} {\text{mim}}} \right]\left[ {{\text{NTF}}_{2} } \right]\) ion pairs indicate that hydrogen-bonding interactions between oxygen and nitrogen atoms (more negative charge) on \(\left[ {{\text{NTF}}_{2} } \right]^{ - }\) anion and the hydrogen atoms (more positive charge) on the imidazolium ring play a dominating role in the formation of ion pair. Thirteen stable conformers of \(\left[ {{\text{C}}_{2} {\text{mim}}} \right]\left[ {{\text{NTF}}_{2} } \right]\) were optimized. According to our results, the strongest and weakest hydrogen bonds were existing in \(\left[ {{\text{C}}_{2} {\text{mim}}} \right]\left[ {{\text{NTF}}_{2} } \right]\) and \(\left[ {{\text{C}}_{8} {\text{mim}}} \right]\left[ {{\text{NTF}}_{2} } \right]\), respectively. A redshift of 290, 262, 258, and 257 cm^?1 has been observed for cations involving \(\left[ {{\text{C}}_{2} {\text{mim}}} \right]^{ + }\), \(\left[ {{\text{C}}_{4} {\text{mim}}} \right]^{ + }\),\(\left[ {{\text{C}}_{6} {\text{mim}}} \right]^{ + }\), and stretching vibrations of \({\text{C}}12{-}{\text{H}}3\), respectively. By increasing the chain length, the strength of hydrogen bonds decreases as a result of \({\text{C}}12{-}{\text{H}}3\) bond elongation and less changes are observed in stretching vibrations of \({\text{C}}12{-}{\text{H}}3\) compared to the free cations. To the best of our knowledge, this research is the first work which reports the far-IR of \(\left[ {{\text{C}}_{4} {\text{mim}}} \right]\left[ {{\text{NTF}}_{2} } \right]\), \(\left[ {{\text{C}}_{6} {\text{mim}}} \right]\left[ {{\text{NTF}}_{2} } \right]\), and \(\left[ {{\text{C}}_{8} {\text{mim}}} \right]\left[ {{\text{NTF}}_{2} } \right]\) and the mid-IR of \(\left[ {{\text{C}}_{8} {\text{mim}}} \right]\left[ {{\text{NTF}}_{2} } \right]\).     

Sequential Preparation of Series of Ternary Solutions

For ternary (and more general multicomponent) liquid-phase systems, solution preparation is a necessary step in measuring thermodynamic and transport property data and in identifying compositions useful in specific applications. We consider a ternary system comprised of liquid components A, B, and C (typically, nonelectrolytes), fully miscible over the entire range of composition. Achieving uniform coverage of the ternary triangle of compositions, with mass fraction increments of \( {1 \mathord{\left/ {\vphantom {1 N}} \right. \kern-0pt} N} \) corresponding to mass fractions of \( w_{\text{A}} = {m \mathord{\left/ {\vphantom {m N}} \right. \kern-0pt} N} \), \( w_{\text{B}} = {n \mathord{\left/ {\vphantom {n N}} \right. \kern-0pt} N} \), \( w_{\text{C}} = 1 - w_{\text{A}} - w_{\text{B}} \), for \( 0 \le m \le N \) and \( 0 \le m + n \le N \), requires preparation of \( {{(N + 1)(N + 2)} \mathord{\left/ {\vphantom {{(N + 1)(N + 2)} 2}} \right. \kern-0pt} 2} \) solutions. If the minimum quantity required for each composition is characterized in terms of a volume, as for, say, viscometry, then the volume required, if each solution is prepared directly from pure components, will grow with N more rapidly than quadratically. We develop an approach that mixes previously prepared solutions to make new compositions, and substantially reduces the amount of material needed. We illustrate this approach in detail when the components are liquids with the same density, miscible in all compositions, with no volume change on mixing, and each solution can be fully recovered to prepare subsequent solutions. For \( N = 10 \), only nine units are required, compared to 66 units for the conventional approach, while the number of weighings is reduced by 55%. Modifications to deal with cases in which the pure components have different densities, some material is not recovered after measurement, and the components have different costs, are discussed.     

Volumetric,Acoustic and Transport Properties of Metformin Hydrochloride Drug in Aqueous <Emphasis Type="SmallCaps">d</Emphasis>-Glucose Solutions at <Emphasis Type="Italic">T</Emphasis> = (298.15–318.15) K

Apparent molar volumes, apparent molar adiabatic compressibilities and viscosity B-coefficients for metformin hydrochloride in aqueous d-glucose solutions were determined from solution densities, sound velocities and viscosities measured at T = (298.15–318.15) K and at pressure p = 101 kPa as a function of the metformin hydrochloride concentrations. The standard partial molar volumes (\( \phi_{V}^{0} \)) and slopes (\( S_{V}^{*} \)) obtained from the Masson equation were interpreted in terms of solute–solvent and solute–solute interactions, respectively. Solution viscosities were analyzed using the Jones–Dole equation and the viscosity A and B coefficients discussed in terms of solute–solute and solute–solvent interactions, respectively. Adiabatic compressibility (\( \beta_{s} \)) and apparent molar adiabatic compressibility (\( \phi_{\kappa }^{{}} \)), limiting apparent molar adiabatic compressibility (\( \phi_{\kappa }^{0} \)) and experimental slopes (\( S_{\kappa }^{*} \)) were determined from sound velocity data. The standard volume of transfer (\( \Delta_{t} \phi_{V}^{0} \)), viscosity B-coefficients of transfer (\( \Delta_{t} B \)) and limiting apparent molar adiabatic compressibility of transfer (\( \Delta_{t} \phi_{\kappa }^{0} \)) of metformin hydrochloride from water to aqueous glucose solutions were derived to understand various interactions in the ternary solutions. The activation parameters of viscous flow for the studied solutions were calculated using transition state theory. Hepler’s coefficient \( (d\phi /dT)_{p} \) indicated the structure making ability of metformin hydrochloride in the ternary solutions.     

Ionization Constants of DL-2-Aminobutyric Acid and DL-Norvaline Under Hydrothermal Conditions by UV–Visible Spectroscopy

The first and second ionization constants for the amino acids DL-2-aminobutyric acid (DL-2-aminobutanoic acid) and DL-norvaline (DL-2-aminopentanoic acid) were determined under hydrothermal conditions, from 175 to 275 °C at 10 MPa, using thermally-stable colorimetric pH indicators (acridine, 4-nitrophenol and 2-naphthoic acid). The measurements were carried out by UV–visible spectroscopy using a high-temperature, high-pressure platinum flow cell with sapphire windows, which minimized the effects of thermal decomposition. The results were combined with literature values from titration calorimetry at 25–130 °C to yield an extended van’t Hoff model for the temperature dependence of the ionization constants for the carboxylic acid and ammonium groups, \( K_{\text{a,COOH}} \) and \( K_{{{\text{a,NH}}_{3}^{ + } }} \), over the entire temperature range. The experimental results for the second ionization constant \( K_{{{\text{a,NH}}_{3}^{ + } }} \) at elevated temperatures are consistent with the predictions from the Yezdimer–Sedlbauer–Wood functional group additivity model, but for the first ionization constant \( K_{\text{a,COOH}} \) are not. This suggests that the group contribution parameters for the standard partial molar heat capacity of the carboxylic acid group are in error, or that nearest neighbor interactions between the –COOH and \( - {\text{NH}}_{3}^{ + } \) groups cause a breakdown in the functional group additivity relationship.     

Thermodynamic investigations of 1-ethyl-3-methylimidazolium tetrafluoroborate and cycloalkanone mixtures

The densities, ρ, speeds of sound, u, and heat capacities, (C _P)_mix, for binary 1-ethyl-3-methylimidazolium tetrafluoroborate (1) + cyclopentanone or cyclohexanone (2) mixtures within temperature range (293.15–308.15 K) and excess molar enthalpies, H ^E, at 298.15 K have been measured over the entire composition range. The excess molar volumes, V ^E, excess isentropic compressibilities, \( \kappa_{\text{S}}^{\text{E}}, \) and excess heat capacities, \( C_{\text{P}}^{\text{E}}, \) have been computed from the experimental results. The V ^E, \( \kappa_{\text{S}}^{\text{E}} \) , H ^E, and \( C_{\text{P}}^{\text{E}} \) values have been calculated and compared with calculated values from Graph theory. It has been observed that V ^E, \( \kappa_{\text{S}}^{\text{E}} \) , H ^E, and \( C_{\text{P}}^{\text{E}} \) values were predicted by Graph theory compare well with their experimental values. The V ^E, \( \kappa_{\text{S}}^{\text{E}}, \) and H ^E thermodynamic properties have also been analyzed in terms of Prigogine–Flory–Patterson theory.     

Compatibility of activity coefficients estimated experimentally and by Pitzer equations for the assessment of seawater pH

Calibration of pH meters is usually performed with reference pH buffer solutions of low ionic strength, I ≤ 0.1 mol kg^?1. For seawater pH measurements (I ≈ 0.7 mol kg^?1), calibration buffers in high ionic strength matrix are required. The Harned cell, in association with the Nernst equation and a model for estimating the chloride ion activity coefficient, \(\gamma_{{{\text{Cl}}^{ - } }} ,\) is the basis of the primary method for pH assignment to reference pH buffers. The semi-empirical Pitzer model is, in principle, adequate to estimate \(\gamma_{{{\text{Cl}}^{ - } }}\) of complex solutions, namely seawater. Nevertheless, no assessment of the validity of the model for this matrix is known to the authors. This work aims at estimating the adequacy of the Pitzer model by assessing the metrological compatibility of mean activity coefficients, in this case \(\gamma_{ \pm } = \sqrt {\gamma_{{{\text{H}}^{ + } }} \gamma_{{{\text{Cl}}^{ - } }} }\) estimated experimentally with the Harned cell, \(\gamma_{ \pm }^{\text{Exp}} ,\) and using the Pitzer model, \(\gamma_{ \pm }^{\text{Ptz}}\). The measurement uncertainty considered in the compatibility test was estimated using the bottom-up approach, where components were combined by the numerical Kragten method after checking its adequacy. The compatibility of the estimated \(\gamma_{ \pm }\) was assessed for solutions with increasing complexity and an ionic strength of 0.67 mol kg^–1. \(\gamma_{ \pm }^{\text{Exp}}\) and \(\gamma_{ \pm }^{Ptz}\) are metrologically compatible for a confidence level of 95 % where the relative standard uncertainty of their difference ranged from 1.1 % to 3.1 % in all chloride solutions to approximately 6.3 % when sodium sulfate was also present. This led to assume the validity of the Pitzer model equations to estimate \(\gamma_{{{\text{Cl}}^{ - } }} ,\) required to define reference pH values of buffer solutions with high ionic strength.     

Crystallization study of Se<Subscript>86</Subscript>Sb<Subscript>14</Subscript> glass

The present study concerns with high-accuracy determination of crystallization activation energy (\(E_{\text{c}}\)), the frequency factor (\(k_{0}\)), the kinetic exponent (n) for Se₈₆Sb₁₄ glass. Different three methods have been used to investigate the \(E_{\text{c}} \,{\text{and}}\,k_{0 }\) values. It was found that the deduced value of k ₀ based on Kissinger’s method is too small compared with the others. Therefore, it can’t be used to investigate k ₀ value. Where \(E_{\text{c}} \,{\text{and}}\,k_{0}\) values are already known, the overall reaction rate \(k = k_{0 } { \exp }\left( { - E_{\text{c}} /\left( {R \cdot T} \right)} \right)\) at any temperature can be calculated. Now, Avrami’s equation (\(\chi = 1 - { \exp }\left( { - \left( {kt} \right)^{\text{n}} } \right)\)) contains only one unknown which is the kinetic exponent (n). This method enables us to determine n value without any approximations. The values’ crystallization fraction \((\chi_{\text{th}} )\) that theoretically calculated is the same as that experimentally investigated \((\chi_{{{ \exp } .}} )\).