Evaluation of Accuracy for the Measurement of Octanol–Water Partition Coefficient by MEEKC

Microemulsion electrokinetic chromatography (MEEKC) has been widely used as an indirect tool to measure octanol–water partition coefficients (logP _ow) of various kinds of compounds. In this paper, we present for the first time a mathematical model of the precision of logP _ow (ΔlogP _ow) as a function of the deviation of migration time (Δt _m) in MEEKC, and more importantly evaluated the accuracy of the MEEKC. Our model shows that for a given microemulsion system, there is an interval of migration times, where a high precision in the determination of logP _ow can be obtained. However, when the migration time approaches either the migration time of the electroosmotic flow or that of the microemulsion phase, the precision of logP _ow deteriorates rapidly. The model was experimentally verified by the microemulsion system with migration times of 6.50 and 32.00?min for the electroosmotic flow and microemulsion phase, respectively, and we found the useful logP _ow interval to be 0.50–5.50. The paper also demonstrates that the calibration constants between migration times t _m and predicted logP _ow values could be transferred with high accuracy from one MEEKC system to another as long as both systems are set up to use the same operational parameters.     

Capacity Titration Technique for Determining the Solid Diffusion Coefficient of Intercalary Species within Insertion-host Materials

Investigation on the solid diffusion process of intercalary species within insertion-host materials plays an important role in the energy storage and output of secondary batteries1. To determine the solid diffusion coefficient, several electrochemical techniques have been developed such as galvanostatic intermittent titration (GITT)2,3, electrochemical impedance spectroscopy (EIS)4,5, potential intermittent titration technique (PITT)6, and potential step chronoamperometry (PSCA)7, potenti…     

QSPR Study on Octanol/water Partition Coefficient （lgKow） of Substituted Naphthalin Compounds

Structural parameters of 24 substituted naphthalin compounds were computed at four levels using Hartree-Fock and DFT methods. Based on the experimental data of octanol/water partition coefficient (lgKow),three-parameter (energy of the highest occupied molecular orbital (EHOMO),the most positive atomic net charges of molecule (q+) and molecular average polari-zability (α)) dependent equations were developed using structural parameters as theoretical des-criptors. Especially,lgKow dependent equation calculated at the HF/6-311G** level is more advantageous than others in view of their correlation and predictive abilities. This dependent equation was validated by variance inflation factors (VIF) and t-test methods and used to predict lgKow of eight designed compounds. Upon comparison,the predictive abilities of our work are all more advantageous than those calculated from molecular property calculator program.     

Determination of Proton Diffusion Coefficient in Spherical Nickel Hydroxide Using Potential Step Measurement on Single Beads

The Potential step measurements are carried out on single beads of nickel hydroxide and the results are interpreted with a dual structure model featuring fast and slow diffusing components The intrinsic diffusion coefficients for the two components are found to be in the order of magnitude 10^-7 and 10^-13-10^-14 cm^2s^-1, respectively, with an apparent value for the slow component in the order of 10^-10 cm^2s^-1.     

Violacein/β-Cyclodextrin Inclusion Complex Formation Studied by Measurements of Diffusion Coefficient and Circular Dichroism

The formation of inclusion compounds between violacein and-cyclodextrin was studied by diffusion and circulardichroism measurements. The present work was undertaken to explore the feasibilityof the -cyclodextrin in reducing the toxicity and enhancing the antitumoral efficacy ofviolacein by forming an inclusion complex. The results of the two experimentsare in good agreement, suggesting the formation of 1 : 1 and 1 : 2 complexes.The diffusion coefficient measurements enabled estimates of the sizes of the complexesinvolved. From the circular dichroism and computational calculations it was possibleto view a preference for inclusion of the most polar part of the molecule to form a1 : 2 inclusion complex. We expect that this work proves the potential of thesetechniques to determining complex stoichiometry.     

Rapid Estimation of Octanol–Water Partition Coefficient for Triazole Fungicides by MEKC with Sodium Deoxycholate as Surfactant

A rapid estimation of octanol–water partition coefficient (log P _ow) was developed for triazole fungicides by micellar electrokinetic chromatography (MEKC). Five standard compounds with known log P _ow values from 2.9 to 4.3 (cyproconazole, bromuconazole, epoxiconazole, bitertanol and difenoconazole) were used for constructing the calibration curve of the log P _ow against the MEKC retention factor, log k. A linear relationship was achieved between log P _ow and log k, in the MEKC system containing 40 mM sodium deoxycholate (SDC) and 4 mM borate buffer at pH 9.3, with a correlation of determination, r ² = 0.9905. The log P _ow values of four test compounds of triazole fungicides (triadimenol, myclobutanil, propiconazole and penconazole) were calculated based on the log k values measured by MEKC and the slope and intercept of the calibration curve. This MEKC method can give good estimation of the log P _ow of the four test compounds of triazole fungicides with the differences between the literature log P _ow values and estimated log P _ow from the MEKC method were from 0.15 to 0.23 log units.     

Sorption of Lead(II) on Two Chelating Resins: From the Exchange Coefficient to the Intrinsic Complexation Constant

The sorption of inorganic lead(II) on two cationic resins containing different complexing groups, the iminodiacetic Chelex 100 and the carboxylic Amberlite CG-50, was investigated. The Gibbs-Donnan model was used to describe and predict the sorption through the determination of the intrinsic complexation constants. These quantities, even though non-thermodynamic, characterize the sorption as being independent of experimental conditions. The sorption mechanism for metals on complexing resins was also studied by adding a competitive soluble ligand that shifts the sorption curves to higher pH. The ligand competes with the resin for complexation with the metal ion. Lead(II) is strongly sorbed on Chelex 100 through the formation of two complexes in the resin phase: MHL with log ₁₀ β _111i =−0.3 and ML with log ₁₀ β _111i =−3.7. The presence of the competitive ligand in solution allows for the determination of a third complex. Furthermore, on Amberlite CG-50 the sorption is rather strong and involves the formation of the complex ML, in more acidic solution, with log ₁₀ β _110i =−2.0. In the presence of the ligand PyDA, the ML(OH) complex was characterized by log ₁₀ β _11−1i =−5.6. In all the experiments the hydrolysis reactions in the aqueous phase are considered quantitatively.     

Influences of Plasma Treatment and 60Co γ-Ray Radiation on the Over-Voltage Positive Temperature Coefficient of High Density Polyethylene/Carbon Black Nano Composites

Argon plasma-pretreated high-density polyethylene (PHDPE) was blended with the conductive nano carbon black (CB) and inorganic flame retardant (magnesium hydroxide, Mg(OH)₂) was added. Influences of the CB content, plasma treatment time, plasma treatment power, and dosage of ⁶⁰Co γ-ray radiation on positive temperature coefficient (PTC) behaviors of composite were studied. In addition, the over-voltage resistance behavior of the composites was also investigated. The free radical of PHDPE was measured by 1,1-diphenyl-2-picryhydrazyl (DPPH) method. The gel contents of composite were measured by solvent extraction method. The results showed that the room-temperature volume resistivity and PTC effect of composite were improved significantly with plasma treatment. The PHDPE composite with ⁶⁰Co γ-ray radiation eliminated the negative temperature coefficient (NTC) effect in the composites effectively, and the PTC intensity of composite was increased. With increasing of radiation dosage from 20 Mrads to 80 Mrads, the gel content of composites increased up to 83.84% and the response temperature of composites shifted to low temperature (127.5 °C to 114.8 °C). In this work, the composites also successfully passed the over-voltage resistance test, and possessed good reproducibility.     

Oxygen Nonstoichiometry, Conductivity, and Seebeck Coefficient of La0.3Sr0.7Fe1−xGaxO2.65+δ Perovskites

The total electrical conductivity and the Seebeck coefficient of perovskite phases La_0.3Sr_0.7Fe_1−xGa_xO_2.65+δ (x=0-0.4) were determined as functions of oxygen nonstoichiometry in the temperature range 650-950°C at oxygen partial pressures varying from 10⁻⁴ to 0.5 atm. Doping with gallium was found to decrease oxygen content, p-type electronic conduction and mobility of electron holes. The results on the oxygen nonstoichiometry and electrical properties clearly show that the role of gallium cations in the lattice is not passive, as it could be expected from the constant oxidation state of Ga³⁺. The nonstoichiometry dependencies of the partial molar enthalpy and entropy of oxygen in La_0.3Sr_0.7(Fe,Ga)O_2.65+δ are indicative of local inhomogeneities, such as local lattice distortions or defect clusters, induced by gallium incorporation. Due to B-site cation disorder, this effect may be responsible for suppressing long-range ordering of oxygen vacancies and for enhanced stability of the perovskite phases at low oxygen pressures, confirmed by high-temperature X-ray diffraction and Seebeck coefficient data. The values of the electron-hole mobility in La_0.3Sr_0.7(Fe,Ga)O_2.65+δ, which increases with temperature, suggest a small-polaron conduction mechanism.