Stability constants of zinc(II), cadmium(II), and cobalt(II) complexes of trimethylenediamine-<Emphasis Type="Italic">N,N,N′,N′</Emphasis>-tetraacetic acid

Stability constants of Zn²⁺, Cd²⁺, and Co²⁺ complexes of trimethylenediamine-N,N,N′,N′-tetraacetic acid were determined at 298.15 K and ionic strengths of 0.1, 0.5, and 1.0 by potentiometric titration. Potassium nitrate and chloride were used as supporting electrolytes. The results obtained were extrapolated to the zeroth ionic strength using an equation with one individual parameter, and the thermodynamic stability constants of the complexes were calculated. The results are compared with the corresponding data on related compounds.     

Development of a novel electrochemical cell for slab optical waveguide spectroscopy for in situ observation of methylene blue and anions on an electrode/electrolyte interface

A new spectroelectrochemical cell for slab optical waveguide (SOWG) spectroscopy was developed in order to observe in situ an electrode/electrolyte interface for bulk electrolysis. The new SOWG spectroelectrochemical cell has been evaluated by simultaneous electrochemical-absorption experiments of methylene blue (MB) using cyclic voltammetry (CV) and SOWG spectrometry. CV was performed in the SOWG spectroelectrochemical cell using indium tin oxide (ITO) coated glass as the working electrode, platinum wire as the counter electrode and a silver/silver chloride electrode (Ag/AgCl) as the reference electrode. Based on the CV and SOWG spectrometric data, it was found that the SOWG spectra showed the MB spectra on the electrode surface selectively and that SOWG with the cell would be useful as a tool for in situ study of an electrode/electrolyte interface. Using this cell, the effects of the supporting electrolytes, NaNO₃, KNO₃, CH₃COONa, and CH₃COOK on the absorbance of MB were examined at the potential of +0.8 V versus Ag/AgCl. The decrease in MB absorbance by nitrate ions was greater than that of acetate ions. Therefore the competitive adsorption of nitrate ions was stronger than that of acetate ions. Thus, the decrease in absorbance of MB in the presence of anions demonstrates the competitive adsorption of anions. These results show that the extent of specific adsorption of electrolytes was observed by measuring the SOWG absorbance intensity of MB.     

Voltammetric study of the complexation of (2E,3E)-2H-1,4-benzothiazine-2,3 (4H)-dionedioxime,a newly synthesized oxime derivative,with nickel(II)

In this article, the electrochemical behavior of the complexation of (2E,3E)-2H-1,4-benzothiazine-2,3 (4 H)-dionedioxime with Ni(II) is studied. The experiments were performed in DMF in the presence of tetraethylammoniumtetrafluoroborate (0.1 M) as a supporting electrolyte and studied by using square-wave voltammetry, cyclic voltammetry, and differential pulse polarography. Reductions of the complexes are irreversible. The ligand forms 1 : 1 and 1 : 2 (metal : ligand) complexes with Ni(II). Stability constants of the formed complexes were evaluated with the modified DeFord–Hume method at different ligand concentrations as 3.21(±0.03) × 10⁶ and 2.73(±0.03) × 10⁶, respectively.     

Simultaneous electrochemical determination of nitrate and nitrite in aqueous solution using Ag-doped zeolite-expanded graphite-epoxy electrode

In this work a new electrochemical sensor based on an Ag-doped zeolite-expanded graphite-epoxy composite electrode (AgZEGE) was evaluated as a novel alternative for the simultaneous quantitative determination of nitrate and nitrite in aqueous solutions. Cyclic voltammetry was used to characterize the electrochemical behavior of the electrode in the presence of individual or mixtures of nitrate and nitrite anions in 0.1 M Na₂SO₄ supporting electrolyte. Linear dependences of current versus nitrate and nitrite concentrations were obtained for the concentration ranges of 1-10 mM for nitrate and 0.1-1 mM for nitrite using cyclic voltammetry (CV), chronoamperometry (CA), and multiple-pulsed amperometry (MPA) procedures. The comparative assessment of the electrochemical behavior of the individual anions and mixtures of anions on this modified electrode allowed determining the working conditions for the simultaneous detection of the nitrite and nitrate anions. Applying MPA allowed enhancement of the sensitivity for direct and indirect nitrate detection and also for nitrite detection. The proposed sensor was applied in tap water samples spiked with known nitrate and nitrite concentrations and the results were in agreement with those obtained by a comparative spectrophotometric method. This work demonstrates that using multiple-pulse amperometry with the Ag-doped zeolite-expanded graphite-epoxy composite electrode provides a real opportunity for the simultaneous detection of nitrite and nitrate in aqueous solutions.     

Complex formation of indium(<Emphasis Type="SmallCaps">iii</Emphasis>) with citric acid in aqueous solution

Complex formation of In³⁺ ion with citric acid in an aqueous solution was studied by pH-metric titration at the molar ratio of the reactants [In³⁺] : [H₄Cit] = 1 : 1, 1 : 2, and 1 : 3 in a range of pH 2—10. The mathematical simulation of equilibria in an indium(iii)—citric acid system was performed using the CPESSP program package. The formation of 1 : 1, 1 : 2, and 1 : 3 indium(iii) citrate complexes with different degrees of nuclearity and protonation was established. The equilibrium constants of formation of the complexes were calculated. The predomination of the polynuclear indium(iii) citrate complexes at the equimolar metal to ligand ratio of was observed in almost the whole pH range studied (3—10).     

Electrochemical Behavior of Crystal Violet on Glassy Carbon Electrodes

The electrochemical behavior of Crystal Violet (CV) on the surface of a glassy carbon electrode in potassium chloride, nitrate, and iodide supporting electrolytes was studied using stripping voltammetry. It was demonstrated that an electroactive complex of CV with iodine was adsorbed on the electrode in a KI solution. This property can be used for determining iodide by adsorption–stripping voltammetry.     

The electrodeposition of indium onto vitreous carbon from acidic chloride media

Cyclic voltammetry and potential step techniques have been used to study the electrodeposition of indium metal from 1 mol dm^?3 potassium chloride, pH 2–4.5, onto a vitreous carbon electrode. It is confirmed that the In/In³⁺ couple is fast in chloride media and the nucleation and growth of the indium phase is discussed. It is shown that instantaneous nucleation occurs at an overpotential of only a few mV and that the growth of the nuclei is three dimensional.     

Anodic stripping voltammetry with mercury electrodes in extracts of cadmium,lead, thallium and indium diethyldithiocarbamate complexes and analysis of mixtures

The selectivity of the determination of traces of cadmium, lead, thallium and indium is improved by direct coupling of liquid/liquid extraction and anodic stripping voltammetry. Metals are extracted from aqueous solution to benzene or chloroform after the addition of sodium or zinc diethyldithiocarbamate. Stripping voltammetry of Cd, Tl and Pb at a hanging mercury drop electrode or mercury film electrode is done in benzene/methanol medium (1:1) with 0.1 M NaClO₄ as supporting electrolyte. For indium, the medium is chloroform/ethanol/water (1:4:1) with 0.005 M sodium acetate/0.06 M KBr/0.06 M HCl as supporting electrolyte. The complexes in acidic solution can be decomposed by mercury (II) ions, which provides useful shifts of deposition potentials. Calibration graphs are linear at concentrations of about 10^?7 M with a detection limit of 1×10^?8 M. The method is applied to determine a single metal in the presence of a large amount (1000-fold) of interfering metal.     

The Kinetics of Indium Electroreduction from Chloride Solutions

The electroreduction of indium on indium electrode (99.98%) in perchlorate-containing chloride electrolytes is studied by the methods of linear sweep and cyclic voltammetry, impedance spectroscopy, and chronoamperometry. The indium electroreduction is limited by diffusion, the reaction rate constant is 1.3 10^–4 cm/s at the indium salt concentration of 0.1 M. The values of the apparent rate constant for the charge transfer stage found by linear sweep and cyclic voltammetry and also by impedance spectroscopy are 2.37 × 10^–3, 3.62 × 10^–3, 3.06 × 10^–3 cm/s, respectively. The values of diffusion coefficient of indium(III) ions calculated according to the Cottrell equation based on chronoamperametric measurements and from the Warburg impedance found by impedance spectroscopy are in good agreement. The presence of the Gerischer impedance is stated, which suggests that a homogeneous reaction of formation of indium chloride complexes proceeds and its mechanism is chemical-electrochemical.

     

Capillary electrophoresis of methyl-substituted phenols in acetonitrile

The separation of mono- and dimethylphenols by capillary electrophoresis in pure acetonitrile was investigated. In acetonitrile, uncharged phenols interact with background electrolyte anions forming negatively charged complexes, which can be separated from each other by capillary electrophoresis. The background electrolyte anions tested were acetate, bromide and chloride. The calculated formation constants for phenol–anion complexes were highest with acetate and smallest with bromide. Complex formation was found to be sensitive to traces of water in the background electrolyte. The separation of methylphenols was also carried out in acetonitrile at high pH using background electrolytes prepared from diprotic acids and tetrabutylammonium hydroxide. At high pH the phenols were partly dissociated, providing an additional mechanism for the separation. All methylphenols were separated with the use of malonate background electrolyte. However, this approach was prone to interference from methanol resulting from the tetrabutylammonium hydroxide solution.     

Electronic Delocalization in Two and Three Dimensions: Differential Aggregation in Indium “Metalloid” Clusters

Reduction of indium boryl precursors to give two‐ and three‐dimensional M−M bonded networks is influenced by the choice of supporting ligand. While the unprecedented nanoscale cluster [In₆₈(boryl)₁₂]⁻ (with an In₁₂@In₄₄@In₁₂(boryl)₁₂ concentric structure), can be isolated from the potassium reduction of a bis(boryl)indium(III) chloride precursor, analogous reduction of the corresponding (benzamidinate)In^IIIBr(boryl) system gives a near‐planar (and weakly aromatic) tetranuclear [In₄(boryl)₄]²⁻ system.     

Analysis of chloride, bromide and iodide using miniaturised isotachophoresis on a planar polymer chip

A new method has been developed to allow the determination of the halide anions chloride, bromide and iodide using isotachophoresis. This method employs a new electrolyte system which incorporates the novel application of indium(III) as a complexing agent. This electrolyte system was devised based on the findings of an investigation into the potential for using indium(III) as a complexing counter ion to selectively manipulate the effective mobilities of halide ions. A leading electrolyte incorporating 3.5 mmol dm(-3) of indium(III) allowed the simultaneous determination of chloride, bromide and iodide to be successfully achieved. The new procedure allows such separations to be made without interference from common inorganic anions such as sulfate and nitrate. Separations were performed using a miniaturised planar poly(methyl methacrylate) chip with integrated platinum wire conductivity detection electrodes. Using this instrumentation the limits of detection were calculated to be 0.7 mg dm(-3), 1.7 mg dm(-3) and 2.2 mg dm(-3) for chloride, bromide and iodide respectively.     

Adsorption of procaine at the mercury/electrolyte solution interface

The adsorption of the local anaesthetic procaine hydrochloride at the mercury/electrolyte interface solution is followed using capacitance measurements. The adsorption is studied at various procaine concentrations, in potassium chloride, potassium bromide or potassium fluoride used as supporting electrolytes, and at various pH values and temperatures. Procaine has basic properties with two acidity constants K. The results indicate the way the procaine molecules orientate at the interface. In all cases studied no hemimicelles or condensed film are observed.     

Silver deposition from silver rubidium iodide

The halogenide (Cl^?, Br^?, I^?) complexes of indium(III) were investigated polarographically. The potential obtained in the presence of iodide ion (0.0004 M) was taken as the half-wave potential of “free” indium ion. The half-wave potentials at low halogenide concentrations were corrected for the kinetic effect. The approximate values of the stability constants read off from the curve (half-wave potential versus logarithm of ligand concentration) at points corresponding to the mean ligand numbers n=0.5, 1.5, 2.5, and 3.5 were then refined by the trial and error method. Four stability constants were found for each of the ligands investigated. The logarithms of β_1–4 are 2.70, 3.20, 4.20 and 3.30 for chloride ions, 2.10, 2.40, 2.50 and 0.60 for bromide ions and 1.35, 1.40, 1.30 and 0.50 for iodide ions. It was also assumed that the too high values of β₁ found by Bond resulted from neglect of the kinetic character of the waves.     

Electrochemical Synthesis and Characterization of Electroactive Conducting Polypyrrole Polymers

Conducting/electroactive polypyrrole polymers are synthesized electrochemically on glassy carbon in various electrolytes (counterions). The polymers' electroactivity is measured using cyclic voltammetry. The electrolytes are chloride, nitrate, p-toluene sulfonate, dodecyl sulfate, and dodecylbenzenesulfonate of sodium and potassium ferrocyanide. It is found that the electrolyte (dopant) markedly affects the redox behavior of the polypyrrole films.     

Cobalt(II) Chloride Complex Formation in Acetamide–Calcium Nitrate Tetrahydrate Melts

The absorption spectra of Co(II) chloride complexes, containing variable concentrations of chloride ligand, in a molten mixture of 80 mol% acetamide–20 mol% calcium nitrate tetrahydrate, were studied at 313, 333, 353, and 363 K, in the wavelength range 400-800 nm. The melt contains three possible ligands (CH₃CONH₂, H₂O, and NO₃ ^-) for competition with added chloride ligand. Addition of chloride caused a shift of the absorption maximum of octahedral cobalt(II) nitrate towards lower energies and pronounced changes in the shape of the initial spectrum of cobalt(II) nitrate. The effect of temperature changes on the molar absorption coefficient of the Co(II) species was dependent on the chloride concentration and was attributed to the structural changes occurring in the cobalt(II) species. The STAR and STAR FA programs were applied to identify the complex ionic species and to calculate the stability constants of Co(II) complexes formed in this solvent. The results indicate the highest probability of formation of the following complex species: Co(NO₃)₄ ^2-, Co(NO₃)₂Cl₂ ^2-, and CoCl₄ ^2-. Stability constants of each complex were presented for the equilibria occurring at 313, 333, 353, and 363 K. Distribution of the Co(II) species was also calculated over the ranges of chloride concentration and temperature investigated.     

The simultaneous determination of chloride, nitrate and sulphate by isotachophoresis using bromide as a leading ion

A new method has been devised to allow the determination of small inorganic anions using isotachophoresis. This method makes use of indium(III) as a counter ion to manipulate the effective mobilities of inorganic anion species by means of complexation reactions. This new procedure successfully allowed the simultaneous determination of nitrate, chloride and sulphate to be realised on a capillary scale instrument and in a chip-based separation device. The electrolyte system developed to allow the separation to be achieved employed a 10mM bromide-based leading electrolyte containing 1.25 mM indium(III) at pH 3.15 and a terminating electrolyte of cyanoacetic acid.     

Interactions Between Tetra(trifluoromethylsulfonyl)-1,4,8,11-tetraazocyclotetradecane and Perchlorate Anion in Propylene Carbonate, Nitromethane, Acetonitrile, and Tetrahydrofuran

Electrical conductance measurements are reported for lithium perchlorate andthe anion receptor tetra(trifluoromethylsulfonyl)-1,4,8,11-tetraazocyclotetradecane(TTCD) in different aprotic solvents (propylene carbonate, nitromethane,acetonitrile, and tetrahydrofuran). The data have been analyzed by a suitablemethod based on the Lee-Wheaton theory on mixed electrolytes in order to obtainthe true thermodynamic formation constants of macrocyclic-anion complexes andthe ion pairs of both the uncomplexed (ClO₄ ^–)and complexed (TTCD-ClO₄ ^–)anions. The results show that the anion-ligand formation constants increase withdecreasing dielectric constant and that the presence of the ligand increases theionization of lithium perchlorate and enhances the transference number of lithiumion. These findings are of particular interest in view of the technologicalapplication of anion receptors in electrolyte solutions for lithium batteries.     

The Effect of Supporting Electrolyte Concentration on Zinc Electrodeposition Kinetics from Methimazole Solutions

The kinetic parameters of Zn²⁺ ion electroreduction in sodium perchlorate used as the supporting electrolyte on the mercury electrode in the presence of methimazole were determined using electrochemical impedance spectroscopy (EIS), cyclic voltammetry (CV) and DC polarography. The two‐stage nature of this process was demonstrated. Both steps are catalysed by a methimazole. The size of the acceleration effect depends on the concentrations of methimazole and the supporting electrolyte. The acceleration of the electrode process involves the formation of active complexes between the depolarizer ions and methimazole on the electrode surface. These complexes facilitate the exchange of charge between the electrode and zinc ions during electroreduction process. The change of the hydrating sphere of the zinc ion is also important here. This in turn depends on its oxidation state and the concentration of the supporting electrolyte.     

The use of indium(III) as a complexing counter-ion to enable the separation of chloride,bromide, and iodide using isotachophoresis

A new method has been devised to enable the determination of halide anions by isotachophoresis. This method uses an electrolyte system that employs indium(III) as a counter-ion to manipulate the effective mobilities of sample species by means of complexation reactions. This new procedure successfully enabled the simultaneous determination of the halide ions chloride, bromide, and iodide when a 12 mmol L^–1 nitrate-based leading electrolyte containing 3.5 mmol L^–1 indium(III) at pH 3.0 was used.