Solid phase extraction for the speciation and preconcentration of inorganic selenium in water samples: A review

Selenium is an essential element for the normal cellular function of living organisms. However, selenium is toxic at concentrations of only three to five times higher than the essential concentration. The inorganic forms (mainly selenite and selenate) present in environmental water generally exhibit higher toxicity (up to 40 times) than organic forms. Therefore, the determination of low levels of different inorganic selenium species in water is an analytical challenge. Solid-phase extraction has been used as a separation and/or preconcentration technique prior to the determination of selenium species due to the need for accurate measurements for Se species in water at extremely low levels. The present paper provides a critical review of the published methods for inorganic selenium speciation in water samples using solid phase extraction as a preconcentration procedure. On the basis of more than 75 references, the different speciation strategies used for this task have been highlighted and classified. The solid-phase extraction sorbents and the performance and analytical characteristics of the developed methods for Se speciation are also discussed.     

The effect of the presence of volatile organoselenium compounds on the determination of inorganic selenium by hydride generation

As a result of microbiological activity it is possible to find dimethylselenium (DMSe) and dimethyldiselenium (DMDSe) in a wide type of environmental samples, such as soils, sediments, sewage sludges and plants where methylation can take place.Selenium determination by hydride-generation (HG) techniques requires its presence as Se(IV). Consequently, inorganic speciation by hydride generation techniques is done by first determining Se(IV) and then, after reduction of Se (VI) to Se(IV), the total selenium. Therefore, the concentration of Se (VI) is evaluated as the difference between total inorganic selenium and Se(IV). In the present work it could be demonstrated that DMSe and DMDSe are forming other volatile species by reaction with sodium borohydride, applying the same reduction condition as for inorganic selenium. These species are subsequently detected by several atomic techniques (atomic absorption AAS, atomic fluorescence AFS and inductively coupled plasma-mass spectrometry ICP-MS). The error that their presence can cause in determination of inorganic selenium has been evaluated. The magnitude of this error depends on the specific analytical detector used.The coupling of pervaporation-atomic fluorescence is proposed for the identification of these species and pervaporation-gas chromatography-atomic fluorescence for their individual quantification.     

On-line electrochemically controlled in-tube solid phase microextraction of inorganic selenium followed by hydride generation atomic absorption spectrometry

In this work, for the first time, a rapid, simple and sensitive microextraction procedure is demonstrated for the matrix separation, preconcentration and determination of inorganic selenium species in water samples using an electrochemically controlled in-tube solid phase microextraction (EC-in-tube SPME) followed by hydride generation atomic absorption spectrometry (HG-AAS). In this approach, in which EC-in-tube SPME and HG-AAS system were combined, the total analysis time, was decreased and the accuracy, repeatability and sensitivity were increased. In addition, to increases extraction efficiency, a novel nanostructured composite coating consisting of polypyrrole (PPy) doped with ethyleneglycol dimethacrylate (EGDMA) was prepared on the inner surface of a stainless-steel tube by a facile electrodeposition method. To evaluate the offered setup and the new PPy-EGDMA coating, it was used to extract inorganic selenium species in water samples. Extraction of inorganic selenium species was carried out by applying a positive potential through the inner surface of coated in-tube under flow conditions. Under the optimized conditions, selenium was detected in amounts as small as 4.0 parts per trillion. The method showed good linearity in the range of 0.012–200 ng mL⁻¹, with coefficients of determination better than 0.9996. The intra- and inter-assay precisions (RSD%, n = 5) were in the range of 2.0–2.5% and 2.7–3.2%, respectively. The validated method was successfully applied for the analysis of inorganic selenium species in some water samples and satisfactory results were obtained.     

Inorganic selenium speciation in environmental samples using selective electrodeposition coupled with electrothermal atomic absorption spectrometry

Speciation analyses are of increasing interest in the environmental, toxicological and analytical fields, because the toxicity and reactivity of trace elements depend strongly on the chemical forms in which they are present. A simple electrodeposition–electrothermal atomic absorption spectrometry method for speciation analysis of some organic and inorganic selenium species in typical environmental water and agricultural soil samples has been developed. The method is based on the selective reduction of water-soluble Se(IV) and selenocystine (Se–Cys) species by an uncontrolled applied potential (1.8 V) on a mercury-coated electrode. In acidic media (1.0 M HCl solution) the only inorganic selenium species electrodeposited was Se(IV), and, of the water-soluble organic selenium species Se–Cys and Se–Met only Se–Cys was electrodeposited onto the mercury electrode surface. The proposed methodology was successfully applied to the speciation and determination of selenium in a few environmental samples. The spiked recovery value varied between 91% and 99%. The suggested method has been shown to have a characteristic mass (m₀) of 25 pg, a limit of detection (LOD) of 1.0 μg L^− 1 and a relative standard deviation (RSD%) of 3.5% for 6 measurements at a concentration of 100 μg L^− 1 Se(VI).     

Volatile organo-selenium speciation in biological matter by solid phase microextraction-moderate temperature multicapillary gas chromatography with microwave induced plasma atomic emission spectrometry detection

Microwave induced plasma atomic emission spectrometry (MIP-AES) in combination with multicapillary (MC) gas chromatography could be proven to be useful for element specific detection of volatile species. Solid phase microextraction (SPME) was used for preconcentration and sample-matrix separation. The fiber desorption unit as well as the heating control for the MC column were in-house developed and multicapillary column was operated at moderate temperatures (30-100 °C). The method was optimized for organo-selenium species (dimethylselenide (DMSe), diethylselenide (DEtSe) and dimethyldiselenide (DMDSe)), using a chemometric approach. Stationary phases for the separation column were optimized using a conventional GC and contrasted with the results obtained with the MC. Application was focussed on selenium accumulating biological matter, such as lupine, yeast, Indian mustard and garlic. These samples were grown in hydroponic solution containing inorganic selenium (Na₂SeO₃ and Na₂SeO₄). SPME sampling was carried out in fixed volume flow boxes in headspace above the living plants and in vials using treated samples. Results demonstrate inorganic selenium transformation into volatile organic species during metabolism. Separation is fast, a chromatogram can be obtained in less than 3 min and detection limits were at sub-ppb level for all investigated species. The system is independent from the use of a conventional gas chromatographic oven and can be used as a versatile alternative to highly cost intensive methods such as GC-ICP-MS.     

Analytical methods for the speciation of selenium compounds: a review

Selenium, like sulphur, exists in the environment in several oxidation states and as a variety of inorganic and organic compounds. Dissolved inorganic selenium can be found in natural waters as selenide Se (–II), as colloidal elemental selenium Se (0), as selenite anions HSeO ₃ ^– and SeO ₃ ^2– i.e. Se (+IV) and as the selenate anion (SeO ₄ ^2– ) i.e. Se (+VI). Organic forms of selenium that may be found in organisms, air or in the aqueous environment, are volatile (methylselenides) or non volatile (trimethylselenonium ion, selenoamino acids and their derivatives). Knowledge of the different chemical forms and their environmental and biomedical distribution is important because of the dependence of bioavailability and toxicity on speciation. This paper reviews the different analytical methods used for the speciation of selenium compounds, with special attention to inorganic selenium and organoselenium species.     

气相色谱/电感耦合等离子体质谱测定植物中挥发性硒化合物

Severalinstrumentalmethodscanbeusedforthedetectionanddeterminationofvolatileselenium(Se)andsulfur (S)compounds .Theserelyprimari lyongaschromatography (GC)forseparationanddifferentdetectiontechniques ,includingatomice missiondetection (AED ) ,massspectrom…     

Speciation of Volatile Selenium Species in Plants Using Gas Chromatography/Inductively Coupled Plasma Mass Spectrometry

 Gas chromatography/inductively coupled plasma mass spectrometry (GC/ICP MS) coupled with solid phase micro extraction can provide a simple, extremely selective and sensitive technique for the analysis of volatile sulfur and selenium compounds in the hea     

Analytical selenoamino acid studies by chromatography with interfaced atomic mass spectrometry and atomic emission spectral detection

Consumption of selenium enriched plants or yeast-based nutritional supplements has been reported to provide anticarcinogenic benefits which are selenium compound dependent. Separation and identification of these selenium compounds is critical to understand the activity. Plants and yeast convert inorganic selenium in the soil or growth media into organoselenium compounds, probably following a route similar to the sulfur assimilatory pathway. Non-volatile selenium compounds produced include selenoamino acids, some of which have shown anticarcinogenic activity. Volatile compounds produced by chemical reaction of involatile precursors have also been found. An ion pair chromatographic method with ICP-MS detection for the separation of selenoamino acid standards potentially present in real samples is given. The method allows separation of selenoamino acids including such analytes as the cis-trans isomers of Se-1-propenyl-dl-selenocysteine. The method also provides the capability of determining the presence of selenoxides and possibly selenones, and tracking of other functionalities and reactions by selective derivatization. Alternatively, selenoamino acids are treated with ethylchloroformate to produce stable volatile derivatives which are amenable to GC separation with element specific atomic emission detection (GC-AED). Results of total selenium determination and speciation of selenium enriched yeast-based nutritional supplements, selenium enriched allium vegetables and bioremediation samples are presented.     

Chromatographic speciation of anionic and neutral selenium compounds in Se-accumulating Brassica juncea (Indian mustard) and in selenized yeast

Selenium-accumulating plants such as Brassica juncea (Indian mustard) concentrate the element in plant shoots and roots. Such behavior may provide a cost-effective technology to clean up contaminated soils and waters that pose major environmental and human health problems (phytoremediation). Such ability to transform selenium into bioactive compounds has important implications for human nutrition and health. Element selective characterization of B. juncea grown in the presence of inorganic selenium under hydroponic conditions provides valuable information to better understand selenium metabolism in plants. The present work determines both previously observed organoselenium species such as selenomethionine and Se-methylselenocysteine and for the first time detects the newly characterized S-(methylseleno)cysteine in plant shoots and roots when grown in the presence of selenate or selenite as the only selenium source. A key feature of this study is the complementary role of selenium and sulfur specific chromatographic detection by HPLC with interfaced inductively coupled plasma mass spectrometry (ICP-MS) detection and by derivatization GC with interfaced atomic spectral emission. HPLC-ICP-MS limits of detection for such species were in the range 5-50 ng Se mL(-1) in the injected extracts. Speciation profiles are compared with those of selenium-enriched yeast by both HPLC-ICP-MS and GC-AED.     

Biological and chemical investigation of Allium cepa L. response to selenium inorganic compounds

The aim of this study was to evaluate the biological and chemical response of Allium cepa L. exposed to inorganic selenium compounds. Besides the investigation of the total content of selenium as well as its chemical speciation, the Allium test was used to evaluate the growth of onion roots and mitotic activity in the roots’ meristem. The total content of selenium was determined by inductively coupled plasma mass spectrometry (ICP MS). High-performance liquid chromatography (HPLC), coupled to ICP MS, was used for the selenium chemical speciation. Results indicated that A. cepa plants are able to biotransform inorganic selenium compounds into their organic derivatives, e.g., Se-methylselenocysteine from the Se(IV) inorganic precursor. Although the differences in the biotransformation of selenium are due mainly to the oxidation state of selenium, the experiment has also shown a fine effect of counter ions (H⁺, Na⁺, NH₄ ⁺) on the response of plants and on the specific metabolism of selenium.

Selenium speciation in cow milk obtained after supplementation with different selenium forms to the cow feed using liquid chromatography coupled with hydride generation-atomic fluorescence spectrometry

The purpose of this paper is to develop an easy and quick on-line selenium speciation method (LC-UV-HG-AFS) in cow milk obtained after different supplementation to cow feed. This study focuses on selenium speciation in cow milk after the use of different selenium species (organic selenium as selenised yeast and inorganic selenium as sodium selenite) in the supplementation of forages. Separation was carried out on a μBondapack C₁₈ column with the positively charged ion-pairing agent tetraethylammonium chloride in the mobile phase. The optimization of pre-reduction conditions was carried out; this step was done with UV irradiation and a heating block to improve the reduction of the different Se-compounds. Variables such as exposure time, hydrochloric acid concentration and temperature were studied. The detection limits for SeCyst₂, Se(IV), SeMet and Se(VI) were 0.4, 0.5, 0.9 and 1.0 μg l⁻¹, respectively. The proposed method was applied to cow milk samples. The milk samples obtained after an organic supplementation of feeding as selenised yeast present three species of selenium, SeCyst2, Se(IV) and SeMet, while only SeCyst2 and Se(IV) are present in milk samples obtained after an inorganic supplementation of feeding.     

Analytical selenoamino acid studies by chromatography with interfaced atomic mass spectrometry and atomic emission spectral detection

Consumption of selenium enriched plants or yeast-based nutritional supplements has been reported to provide anticarcinogenic benefits which are selenium compound dependent. Separation and identification of these selenium compounds is critical to understand the activity. Plants and yeast convert inorganic selenium in the soil or growth media into organoselenium compounds, probably following a route similar to the sulfur assimilatory pathway. Non-volatile selenium compounds produced include selenoamino acids, some of which have shown anticarcinogenic activity. Volatile compounds produced by chemical reaction of involatile precursors have also been found. An ion pair chromatographic method with ICP-MS detection for the separation of selenoamino acid standards potentially present in real samples is given. The method allows separation of selenoamino acids including such analytes as the cis-trans isomers of Se-1-propenyl-dl-selenocysteine. The method also provides the capability of determining the presence of selenoxides and possibly selenones, and tracking of other functionalities and reactions by selective derivatization. Alternatively, selenoamino acids are treated with ethylchloroformate to produce stable volatile derivatives which are amenable to GC separation with element specific atomic emission detection (GC-AED). Results of total selenium determination and speciation of selenium enriched yeast-based nutritional supplements, selenium enriched allium vegetables and bioremediation samples are presented. Received: 16 February 1998 / Revised: 4 June 1998 / Accepted: 9 June 1998     

Simultaneous determination of inorganic As(III), As(V), Sb(III), Sb(V), and Se(IV) species in natural waters by APDC/MIBK-NAA

A solvent extraction preconcentration as well as separation method involving ammonium pyrrolinedithiocarbamate (APDC) and 4-methyl-2-pentanone (MIBK) in conjunction with neutron activation analysis (NAA) was developed for the simultaneous measurement of low levels of inorganic arsenic, antimony and selenium species in natural waters. Several critical factors affecting the APDC/MIBK-NAA method were studied in detail including the selection of chelating agent, solvent, aqueous pH for the extraction of six species as well as a few organoarsenic species as representatives for organic species, the stability of the complexes in organic phase, phase volume ratios for extraction and back-extraction steps, and the reduction of the species from higher to lower oxidation state. The detection limits for arsenic, antimony and selenium were found to be as low as 0.026, 0.010 and 0.12 μg L^?1, respectively. Trace amounts of As(III), As(V), Sb(III), Sb(V), and Se(IV) in different types of natural water sample and two water certified reference materials were measured using the APDC/MIBK-NAA method.     

Study of the influence of carboxymethylcellulose on the absorption of selenium (and selected metals) in a target plant

The aim of the present paper is the study of the influence of a polysaccharide (carboxymethylcellulose, CMC) on uptake by a target plant Lactuca sativa (LS) of selenium and some metals. LS was grown on a well characterized soil: such as, treated with 1.5 mg kg⁻¹ Se(IV) only and with two levels of CMC (3 and 30 mg kg⁻¹). Similar experiments were carried out by using Se(VI) instead of Se(IV). Uptake was evaluated through the quantification of total content of Se in dried leaves and roots by a suitable technique (graphite furnace atomic absorption spectrophotometry, instrumental neutron activation analysis and differential pulse cathodic stripping voltammetry). Results evidenced as the uptake of selenium was dependent on the form of selenium added to the soil: Se(VI) is accumulated much more then Se(IV) according to its lower toxicity and higher mobility. The simultaneous presence of CMC led to a lower selenium uptake in leaves, whereas no clear influence was evidenced in roots. Furthermore, the presence of CMC influenced also the mobility process (soil→plant) of several other metals: a lower content of them was detected in plants when CMC was present in the soil.     

Determination of trace elements in a medicinal plant by neutron activation analysis

The concentration of inorganic elements in medicinal plants may be related to the concentration of active constituents. Instrumental neutron activation analysis has been employed to determine the elements antimony, cesium, chlorine, cobalt, iron, manganese, nickel, potassium, rubidium, selenium, sodium and zinc in different parts of Helleborus cyclophyllus BOISS. and in the soil in which the plant was grown. It has been found that antimony has a selective accumulation in the rhizome of this plant where the active constituents are located, as well as chlorine in petioles and leaves.     

Selenium speciation in animal tissues after enzymatic digestion by high-performance liquid chromatography coupled to inductively coupled plasma mass spectrometry

A procedure is described for the enzymatic digestion of tuna and mussel samples that allows the determination of selenium species by high-performance liquid chromatography in conjunction with inductively coupled plasma mass spectrometry. The species were extracted by two-step enzymatic hydrolysis with a non-specific protease (subtilisin). The selenium species were separated on a Spherisorb 5 ODS/AMINO column using two different chromatographic conditions, namely phosphate buffers at pH 2.8 and pH 6.0 as mobile phases. The method determines organic (trimethylselenonium, selenocystine, selenomethionine and selenoethionine) and inorganic selenium species (selenite and selenate), but only organic selenium species were found in the samples. The sum of identified selenium species in the sample was about 30% of the total selenium present in the enzymatic extract despite the fact that recoveries of total hydrolysed selenium were 93-102%. Trimethylselenonium ion and selenomethionine were found in both tuna and mussel samples and an unknown selenium species was also found in tuna samples.     

Development of extraction methods for speciation analysis of selenium in aqueous extracts of medicinal plants

Advanced extraction methods have been developed for direct speciation of dissolved inorganic and organic selenium (Se) species in aqueous extracts of medicinal plants (MPs). The inorganic species of Se (SeIV and SeVI) were separated from organic forms by adsorbing inorganic Se on alumina, while the organic Se was not retained. The retained inorganic Se species was eluted with 10 mL 0.2 M HCl. The total inorganic Se species was determined after prereduction of SeVI into SeIV with concentrated HCl. The SeIV in the eluent and total inorganic Se species were then complexed with diethyldithiocarbamate. The resultant complexes were entrapped in the nonionic surfactant Triton X-114. The total Se, organic Se, total inorganic Se, and SeIV species were determined by electrothermal atomic absorption spectrometry with a modifier. The SeVI concentration was obtained by subtracting SeIV from total inorganic Se contents. The main factors affecting the methodologies were investigated in detail. Under the optimized experimental conditions, the LOD for SeIV was 50 microg/L. Among dissolved inorganic and organic Se species in aqueous extracts of MPs, organic Se species were present in the range of 74-84%, SeIV 3.62-7.47%, and SeVI 12.4-18.57% of total Se contents.     

Identification of selenium species in selenium-enriched Lens esculenta plants by using two-dimensional liquid chromatography-inductively coupled plasma mass spectrometry and [77Se]selenomethionine selenium oxide spikes

Selenium speciation in Se-enriched Lens esculenta grown in hydroponic culture containing inorganic selenium as Na(2)SeO(3) and Na(2)SeO(4) was performed. After 16 days of growth, the plants were collected and divided in two parts, roots and stems and then analysed to identify and quantify selenium species. Speciation studies of the enzymatic extracts were carried out by using anion-exchange (PRP-X100) and size-exclusion/ion-exchange (Shodex Asahipak) columns coupled to inductively coupled plasma mass spectrometry (ICP-MS). The need of using two independent chromatographic mechanisms for unambiguous species identification is demonstrated. Moreover, the use of a [(77)Se]selenomethionine selenium oxide spike turned out to be critical to discriminate between selenium selenomethioine selenium oxide and selenocysteine.     

Preconcentration and separation of inorganic selenium on Dowex 1X8 prior to hydride generation-atomic absorption spectrometry

Exchange reactions between inorganic selenium species and chloride were studied on Dowex 1X8. The concentration exchange constants were determined with the batch technique at room temperature and used to predict the chromatographic enrichment and separation of tetra- and hexavalent selenium. A procedure for the determination of total selenium after digestion with permanganate and anion exchange preconcentration was also developed. The enrichment techniques were applied to the determination of Se(IV) and total dissolved selenium in drinking water and fresh water using flow injection hydride generation-atomic absorption spectrometry (HG-AAS). Results agreed with those obtained in a HG-AAS system where selenium was preconcentrated as hydrogen selenide in a trap at liquid nitrogen temperature.