化学改性生物柴油制备润滑油基础油

用生物柴油来制备环氧生物柴油,然后在D001树脂的催化作用下,环氧生物柴油和异辛醇进行异构醚化开环反应,合成的改性生物柴油即为润滑油基础油.通过红外光谱对原料和产物的结构进行表征,并对合成的润滑油基础油的性能与环氧生物柴油和150SN矿物润滑油进行了比较.结果表明,所合成的润滑油基础油热稳定性好、黏温性能好、黏度指数大、氧化稳定性良好、承载能力和抗磨性能较好.同时考察了D001树脂重复使用性,发现重复使用5次后仍具有较高催化活性.     

基于植物油的润滑油基础油及添加剂合成研究

综述了植物油用作润滑油基础油的改性方法,包括提高植物油中油酸含量的生物改性方法、减少植物油分子不饱和度和提高植物油分子支化度的化学改性方法以及加入硼酸类添加剂或氮化硼纳米粒子等添加剂改性方法;通过在植物油分子中引入功能性官能团以及与其他单体聚合等方法可由植物油合成润滑油添加剂,提高油品的增黏、降凝和抗磨等性能。      

WS2纳米棒的合成及其摩擦学性能

以十六烷基三甲基溴化铵(CTAB)作为表面活性剂,利用水热合成法在180℃条件下成功制备出WS2纳米棒。用XRD、SEM、TEM和HRTEM对WS2纳米棒的结构进行表征和分析,并提出了可能的生长机理。将WS2作为润滑油添加剂加到基础油中,用CETR UMT-2摩擦磨损仪测试其摩擦学性能。结果表明:WS2纳米棒作为润滑油添加剂表现出良好的摩擦性能。     

碳纳米管的化学修饰以及作为润滑油添加剂的摩擦学性能研究

采用硫酸和硝酸混合酸对催化裂解法(CVD法)制备的多壁碳纳米管(MWNNTs)进行纯化,然后运用硬脂酸对碳纳米管进行表面修饰,并研究了硬脂酸修饰后的碳纳米管的表面状况以及作为润滑油添加剂的摩擦学行为．实验结果表明,在硫酸催化剂作用下,通过酯化反应碳纳米管能够被硬脂酸包覆,并且硬脂酸修饰的碳纳米管作为润滑油添加剂能够显著提高基础油的减摩抗磨性能,当添加量为0．15％左右时,润滑油的减摩抗磨性能最佳,与基础油相比可以使摩擦系数下降10％左右,磨损量下降30％～60％．     

双/三氮杂冠醚化合物的合成及其作为摩擦改进剂的性能研究※

现代汽车工业的发展以及环保法规的日益严格对车用润滑油的性能提出了更高要求, 摩擦改进剂在提高发动机油减摩性能及燃油经济性方面发挥着重要作用. 有机钼化合物作为目前使用最为广泛的摩擦改进剂, 会增加油品热氧化沉积物的生成, 且油品氧化会导致其减摩性能下降. 针对摩擦改进剂所存在的诸如有害元素、灰分及活性吸附位点有限等问题, 设计并合成了两种双/三氮杂冠醚化合物, 将活性氮原子及长链烷基引入冠醚结构中以提高吸附性能和油溶性, 并研究其作为摩擦改进剂的减摩和抗磨性能. 结果表明, 所合成双/三氮杂冠醚能有效降低油品的摩擦系数和磨损率, 其中含有吡啶结构的三氮杂冠醚表现出更优的摩擦学性能, 可使摩擦系数和磨损率相对于基础油分别降低8.8%和42%. 机理分析表明, 所合成的双/三氮杂冠醚化合物能够在钢表面发生不同程度的吸附, 并进一步发生摩擦化学反应形成润滑保护膜, 防止滑动表面微凸体的直接接触进而改善摩擦学性能.     

高效液相色谱法测定合成航空润滑油中添加剂

为了提高使用性能,合成航空润滑油中一般加有多种添加剂。因此,分析测定添加剂的含量,不仅对产品的质量管理,而且对研究各油品的使用寿命、废油再生及其解剖分析等都有一定意义。 我们在前人工作的基础上,时常见的合成航空润滑油多种添加剂的高效液相色谱法的测定进行了研究(添加剂种类参见图1)。在采用回收率法进行     

聚甲基丙烯酸甲酯-氯化银复合纳米微球的制备及其摩擦学性能

采用原位种子乳液聚合法合成了聚甲基丙烯酸甲酯 氯化银(PMMA AgCl)核壳结构复合纳米微球,通过透射电镜(TEM),红外光谱(IR),热分析(TG DTA)和X射线粉末衍射(XRD)等测试手段对其结构及性能进行了表征.在四球试验机上对其摩擦学行为进行了考察,研究结果表明,PMMA AgCl核壳结构复合纳米微球用作润滑油添加剂具有良好的抗磨性能,能显著提高基础油的失效负荷.     

HPLC法测定矿物油中多环芳烃

选择使用广泛且组成较复杂的润滑油基础油为代表,进行矿物油中多环芳烃的眦测定方法研究.探讨了样品的提取、固相萃取柱净化等前处理方法,同时也对眦的仪器测定条件进行了优化.     

红外光谱结合偏最小二乘法快速测定在用航空润滑油中磷酸三甲酚酯

采用基础油标准曲线法,建立了在用航空润滑油中抗磨剂磷酸三甲酚酯(TCP)含量与670～630cm-1范围内傅立叶变换红外光谱(FTIR)谱峰面积的定量线性关系,并以标准曲线的预测结果为基础数据,采用偏最小二乘法法(PLS)建立TCP含量的红外光谱快速定量分析模型。模型的相关系数为0.997,校正偏差为0.021。对随机抽取的某型在用航空润滑油样品进行预测并对预测结果进行配对t检验,平均相对误差低于3%,模型预测值与标准方法测定值没有显著性差异,模型具有良好的预测能力。研究结果表明:利用FTIR结合化学计量可以实现在用润滑油TCP的快速定量分析,实时监控润滑油质量。     

全球茂金属聚α-烯烃技术进展的计量分析

为了解全球茂金属聚α-烯烃(mPAO)基础油关键制备技术发展现状和研究趋势,采用文献计量法和专利分析相结合,借助可视化软件VOSviewer,利用Web of Science核心数据库和Incopat专利数据库,对截止到2020年底与mPAO技术相关的论文和专利进行分析,绘制关键词共现图谱,梳理国内外相关领域的规划和布局,以分析当前研究热点及发展趋势。结果表明：mPAO技术研究领域较新,属于领域前沿性技术,目前依然正处在快速发展时期;从研究机构分布来看,国内外有较大差异,国外研究机构主要集中在美国、日本,而国内研究相对分散,尚未形成核心机构群。基于此,预测出高黏度指数和低倾点的mPAO的全球需求将继续增加,mPAO合成润滑油及其工艺将成为高级润滑油基础油的未来发展趋势。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.