New semi-interpenetrating network hydrogels: synthesis, characterization and properties

Amphiphilic hydrogels composed of aliphatic polyesters and poly(ethylene glycol) have potential applications in drug delivery, tissue engineering and other biomedical devices due to their advantageous biological properties, biocompatibility and biodegradability. However, they also exhibit some shortcomings in terms of their reactivity, swelling and mechanical properties. To address these limitations, new semi-interpenetrating network (semi-IPN) hydrogels based on poly(ethylene glycol)-co-poly(epsilon-caprolactone) (PEG-PCL) diacrylate macromer and hydroxypropyl guar gum (HPGG) were prepared by a low intensity ultraviolet (UV) light irradiation method, and characterized by FT-IR, DSC and WAXD analysis. Their properties were evaluated by investigating the swelling kinetics, dynamic mechanical rheology and the release behavior for bovine serum albumin (BSA). It was found that the introduction of the semi-IPN structure and HPGG decreased the crystallinity of PEG segments in the hydrogel, and improved the swelling and mechanical properties of the hydrogel, as well as lowered the release percentage of BSA from the hydrogel. Such hydrogel materials may have more advantages as a potentially interesting platform for the design of medical devices.The elastic modulus (G') and viscous modulus (G') as a function of frequency for various hydrogel samples.     

Mussel-inspired chemistry in producing mechanically robust and bioactive hydrogels as skin dressings

The development of hydrogels as skin dressings demonstrates a great potential in real life applications. To achieve this, the hydrogel has to conquer its natural poor mechanical strength, and to prolong its lifetime, antifatigue and self-healing properties originating from dynamic interactions are also required. As skin dressings, the hydrogel needs to maintain its ductility while pursuing the above mentioned properties. In this work, poly(ethylene glycol) diacrylate is used to produce skin dressings by reinforcing poly(ethylene glycol) diacrylate/alginate double network hydrogels with a crosslinker from mussel-inspired chemistry, which is 3,4-dihydroxy-l-phenylalanine. This crosslinking methodology significantly improved mechanical strength of the hydrogel, with 11,200% increase in compressive failure strength; it endowed the hydrogel with outstanding antifatigue and training strengthening properties that makes its mechanical strength increasing in a 50 cycles compressive test; the hydrogel showed excellent self-healing properties that in rheological characterization; it also displayed enhanced storage modulus after withstanding a shear strain up to 1100%; meanwhile, the hydrogel exhibited extreme ductility with an elastic modulus of only 10.90–16.53 kPa. 3,4-dihydroxy-l-phenylalanine also renders the hydrogel its inherent antioxidant activity, conductivity, and bioadhesiveness. Together with the highly transparent appearance, the hydrogels possess a great potential and practibility in the fields of skin dressings.     

Photopolymerized injectable RGD-modified fumarated poly(ethylene glycol) diglycidyl ether hydrogels for cell growth

In this study, photopolymerized hydrogels of fumarated poly(ethylene glycol) diglycidyl-co- poly(ethylene glycol) diacrylate have been synthesized and modified with cell adhesion peptide, Arg-Gly-Asp (RGD). The structural and mechanical properties of the hydrogels are found to be poly(ethylene glycol) diacrylate (PEGDA) dependent. The percentage of gelation is increased from 72 to 89 wt.-% when the amount of the crosslinker co-monomer (PEGDA) in the hydrogel formulation is increased from 20 to 40 wt.-%. In the present case, the equilibrium mass swelling is decreased from 216 to 93%. The viscosities of the uncured formulations have also been measured and likewise, the results were influenced by the increasing amount of PEGDA that reduced the value from 83 to 36 cP. The compressive modulus of the prepared hydrogels was improved with the addition of the PEGDA. Cell growth experiments have been performed by comparing the properties of the hydrogels with and without RGD units. The results show that RGD units enhance the adhesion of cells to the surface of the hydrogels. SEM-EDS studies reveal that nitrogen and calcium are produced on the osteoblast-seeded surface of the scaffold within the culture time period. [Figure: see text].     

负载蛋白质的胶原/聚两性电解质IPN角膜替代物

以碳二亚胺/N-羟基琥珀酰亚胺(EDC/NHS)和聚乙二醇二丙烯酸酯(PEGDA)为交联剂分别对猪皮去端肽Ⅰ型胶原和3-(甲基丙烯酰胺)丙基-二甲基(3-磺丙)胺(MPDSAH)进行交联, 制备了具有互穿聚合物网络(IPN)结构的角膜替代物. 胶原基IPN角膜替代物的折光指数和白光透过率与天然人角膜相似. IPN水凝胶具有优于纯胶原凝胶的力学性能, 同时PMPDSAH网络的引入明显提高了IPN凝胶在胶原酶中的稳定性. 体外细胞培养实验结果表明, IPN角膜替代物支持人角膜上皮细胞生长. 通过冷冻干燥-溶胀后包覆技术可将牛血清白蛋白(BSA)和神经生长因子(NGF)装载到角膜替代物中, 负载药物的冻干凝胶可干态保存, 避免了湿态下蛋白质等活性因子的失活和漏泄; 再吸水恢复原状的特性可使角膜替代物完好地移植病灶部位, NGF具有良好的缓释效果. 此负载NGF的复合角膜替代物有望促进角膜组织和神经的再生.     

NIPAM共聚物多孔水凝胶的光引发RAFT合成及其溶胀性能

采用光引发可逆加成-断裂链转移(RAFT)方法,在室温下先合成了链端含有三硫代碳酸酯基的大分子链转移剂聚(N,N'-二甲基丙烯酰胺)(PDMAM),然后与N-异丙基丙烯酰胺(NIPAM)、N,N'-二甲基双丙烯酰胺(BIS)交联共聚合,并通过聚乙二醇的制孔作用制得PNIPAM-g-PDMAM梳型/多孔水凝胶.采用FTI...     

Synthesis of the Functional Hydrogels: Poly(N-isopropylacrylamide) Threaded onto the PEG Backbones Via RAFT

Functional poly(N-isopropylacrylamide) (PNIPAM) hydrogels were prepared by reversible addition fragmentation chain transfer (RAFT) polymerization of NIPAM in the presence of four-arm poly(ethylene glycol) (4A-PEG) as backbone and 4-cyanopentanoic acid dithiobenzoate functional α -cyclodextrin threaded onto the PEG as chain transfer reagent (CTA).The structure of the hydrogels was characterized in detail with FTIR techniques. The analytical results demonstrated that α -cyclodextrin remains in as-obtained hydrogels. The swelling behavior was investigated and the functional hydrogels (functional gels) showed accelerated shrinking kinetics and higher swelling ratio comparing with conventional hydrogel (CG). It could be attributed to the presence of dangling chains. The hydrogel exhibited rapid swelling and deswelling kinetics. In principle, the hydrogel might find a number of applications including an on-off system and drug delivery systems.     

Hydrogels for in situ encapsulation of biomimetic membrane arrays

Hydrogels are hydrophilic, porous polymer networks that can absorb up to thousands of times their own weight in water. They have many potential applications, one of which is the encapsulation of freestanding black lipid membranes (BLMs) for novel separation technologies or biosensor applications. We investigated gels for in situ encapsulation of multiple BLMs formed across apertures in a hydrophobic ethylene tetrafluoroethylene (ETFE) support. The encapsulation gels consisted of networks of poly(ethylene glycol)‐dimethacrylate or poly(ethylene glycol)‐diacrylate polymerized using either a chemical initiator or a photoinitiator. The hydrogels were studied with regards to volumetric stability, porosity, and water permeability. All hydrogels had pore sizes around 7 nm with volumetric changes >2% upon crosslinking. Photoinitiated hydrogels had a lower hydraulic water permeability compared to chemically initiated hydrogels; however, for all hydrogels the permeability was several‐fold higher than the water permeability of conventional reverse osmosis (RO) membranes. Lifetimes of freestanding BLM arrays in gel precursor solutions were short compared to arrays formed in buffer. However, polymerizing (crosslinking) the gel stabilized the membranes and resulted in BLM arrays that remained intact for days. This is a substantial improvement over lifetimes for freestanding BLM arrays. Optical images of the membranes and single channel activity of incorporated gramicidin ion channels showed that the lipid membranes retained their integrity and functionality after encapsulation with hydrogel. Our results show that hydrogel encapsulation is a potential means to provide stability for biomimetic devices based on functional proteins reconstituted in biomimetic membrane arrays. Copyright © 2010 John Wiley & Sons, Ltd.     

Mechanical and Adhesive Properties of Ploy(ethylene glycerol) Diacrylate Based Hydrogels Plasticized with PEG and Glycerol

Using polyethylene glycol(PEG) or glycerol as the plasticizer, we synthesized the hydrogels from poly(ethylene glycol) diacrylate(PEGDA), polyvinylpyrrolidone(PVP) and poly(vinyl alcohol)(PVA) under UV radiation. The effects of different plasticizers on the mechanical properties and adhesion properties of the hydrogels were investigated. The results show that the plasticizer can improve the elongation and peeling force. The most pronounced changes in the tensile property of the hydrogels are due to the addition of glycerol followed by PEG, the lower the plasticizer's molecular weight, the greater its effect. The maximum peeling force is 0.317 or 0.257 N with PEG or glycerol as plasticizer, respectively, and their adhesion properties are due to the formation of hydrogen bonds.     

Synthesis and characterization of biodegradable pH-sensitive hydrogels based on poly(?-caprolactone), methacrylic acid, and poly(ethylene glycol)

In this work, a novel biodegradable pH-sensitive hydrogel based on poly(?-caprolactone) (PCL), methoxpoly(ethylene glycol) (MPEG) and methacrylic acid (MAA) was prepared by UV-initiated free radical polymerization. The resulting macromonomers and hydrogels were characterized by FTIR and/or ¹H NMR. Swelling behaviour and pH sensitivity of the hydrogels were studied in detail. With increase in pH of aqueous medium from 1.2 to 7.2, swelling ratio of the hydrogels increased accordingly. The hydrolytic degradation behaviour was also investigated. The prepared biodegradable pH-sensitive hydrogel based on PCL, MPEG, and MAA might have great potential application in smart drug delivery system.     

Highly efficient alginate-based macromolecular photoinitiator for crosslinking and toughening gelatin hydrogels

Constructing gelatin hydrogels through photopolymerization is getting increasingly attractive due to their excellent biocompatibility and unparalleled flexibility in fabricating complex structures. In this study, an alginate-based macromolecular photoinitiator (Alg-2959) is synthesized by grafting Irgacure2959, a widely used hydrophilic small molecular photoinitiator, onto the framework of alginate. The characterization of Alg-2959 is carried out by ¹H nuclear magnetic resonance (¹HNMR), Fourier infrared spectroscopic (FTIR), Thermogravimetric analysis (TGA), and UV–Vis absorption spectrum. It is shown that Alg-2959 can induce the polymerization of acrylate monomer poly(ethylene glycol) diacrylate (PEGDA400) and glycidyl methacrylate modified gelatin (Gel-GM) with similar initiation efficiency as Irgacure2959. Compared with the pure hydrogels prepared using Irgacure2959, the hybrid hydrogels containing Alg-2959 can be further crosslinked by Ca²⁺ to form the double-network hydrogels, which exhibit enhanced toughness and elasticity. In addition, due to the introduction of alginate, the migration stability of Alg-2959 in the hydrogel networks is significantly improved compared with Irgacure2959. These results indicate the great potential of Alg-2959 in preparing biocompatible and resilient photopolymers.     

The stability of semi-interpenetrating polymer networks based on sulfonated polyimide and poly(ethylene glycol) diacrylate for fuel cell applications

A series of the semi-interpenetrating polymer network (semi-IPN) membranes based on sulfonated polyimide and poly(ethylene glycol) diacrylate were prepared and characterized comparing with pure sulfonated polyimide membrane and commercially available membrane, Nafion^® 117. The proton conductivity increased with the increase of poly(ethylene glycol) diacrylate contents in spite of the decrease in ion exchange capacity which is a key factor to improve the proton conductivity. The water stability of semi-IPN membranes containing poly(ethylene glycol) diacrylate is higher than the pure sulfonated polyimide membrane. Morphological structure showed that amorphous nature of the films also increased with the poly(ethylene glycol) diacrylate contents, which could make a crosslink, so that the crystallinity of polyimide could disappear. Semi-IPN membranes based on sulfonated polyimide and poly(ethylene glycol) diacrylate, which show good conductivity comparable to Nafion^® 117 in the range of 20-50% content of poly(ethylene glycol) diacrylate, could be promising proton conducting membranes in fuel cell application.     

Enhancing hydrophilicity and protein resistance of silicone hydrogels by plasma induced grafting with hydrophilic polymers

<正>The hydrophilicity of silicone hydrogels used as soft corneal contact lens plays an important role in wearing comfort.In order to enhance hydrophilicity and protein resistance,silicone hydrogel membranes were modified by atmospheric pressure glow discharge plasma(APGDP) induced surface graft polymerization of N-vinyl pyrrolidone(NVP) and poly(oligoethylene glycol methyl ether methacrylate)(PEGMA) in this paper.XPS analysis demonstrated the success of graft polymerization of NVP and PEGMA onto the surface of silicone hydrogel membranes.The hydrophilicity of silicone hydrogels was characterized by the measurement of water contact angle(WCA).The result showed that NVP grafted silicone hydrogel has the WCA of about 68°and PEGMA grafted silicone hydrogel has the lowest WCA of about 62°,while the pristine silicone hydrogel is hydrophobic with the WCA of about 103°.Protein resistance of silicone hydrogels was investigated by the method of bicinchoninic acid assay using bovine serum albumin(BSA) as a model.It's found that the grafted silicone hydrogel has a significant improvement of protein resistance,and PEGMA grafting is more efficient for the reduction of protein adsorption than NVP grafting.The silicone hydrogel membranes grafted with NVP and PEGMA are good candidates of soft corneal contact lenses.     

APPLICATION OF NONIONIC TEMPERATURE SENSITIVE HYDROGEL FOR CONCENTRATION OF PROTEIN AQUEOUS SOLUTION

Six different N-alkyl substituted acrylarnide nonionic hydrogels were prepared and their swelling characteristics were measured. Poly N-isopropyl acrylamide (PNIPA) and poly N-n-propyl-acrylamide (PNNPA) temperature sensitive hydrogels were chosen as the nonionic temperature sensitive hydrogels for concentration of very dilute aqueous protein solution. The separation properties of PNIPA and PNNPA hydr0gels with different network dimensions were studied and the modification of the hydrogels was surveyed in order to decrease their surface adsorption of protein molecules. The experimental results of the concentration of BSA (Bovin serum albumin) dilute aqueous solution by hydroxylpropyl methacrylate (HPMA) copolymerized PNIPA hydrogel were given. The value and the limitation of concentration of dilute aqueous protein solution by this method was evaluated.     

Surface Modification of Ultra-high Molecular Weight Polyethylene Membranes Using Underwater Plasma Polymerization

Ultra-high molecular weight polyethylene membranes were modified and subsequently polymer coated using the underwater plasma produced by glow discharge electrolysis. This plasma pretreatment generated various O-functional groups among them OH groups have dominated. This modified inner (pore) surface of membranes showed complete wetting and strong adhesion to a hydrogel copolymerized by glow discharge electrolysis also. The deposited hydrogel consists of plasma polymerized acrylic acid crosslinked by copolymerization with the bifunctional N,N′-methylenebis(acrylamide). Tuning the hydrogel hydrophilicity and bio-compatibility poly(ethylene glycol) was chemically inserted into the copolymer. Such saturated polymer could only be inserted on a non-classic way by (partial) fragmentation and recombination thus demonstrating the exotic properties of the underwater plasma. The modification of membrane was achieved by squeezing the reactive plasma solution into the pores by plasma-induced shock waves and supported by intense stirring. The deposited copolymer hydrogel has filled all pores also in the inner of membrane as shown by scanning electron microscopy of cross-sections. The copolymer shows the characteristic units of acrylic acid and ethylene glycol as demonstrated by infrared spectroscopy. A minimum loss in carboxylic groups of acrylic acid during the plasma polymerization process was confirmed by X-ray photoelectron spectroscopy. Additional cell adhesion tests on copolymer coated polyethylene using IEC-6 cells demonstrated the bio-compatibility of the plasma-deposited hydrogel.     

FT‐IR characterization and hydrolysis of PLA‐PEG‐PLA based copolyester hydrogels with short PLA segments and a cytocompatibility study

A series of the biodegradable copolyester hydrogels was prepared using a redox‐initiated polymerization with a constant 1:9 mole ratio of the Boltorn‐based acrylate and diacrylate triblock comacromonomers. The Boltorn® macromonomer was derived from the hyperbranched polyester Boltorn H20, which was functionalized at each terminus with poly(ethylene glycol) acrylate, and the diacrylate triblock macromonomer was poly (lactide‐b‐ethylene glycol‐b‐lactide) diacrylate. The hydrolysis of the copolyesters at pH 7.4 in a phosphate buffered saline solution at 37 °C was studied using ATR‐FTIR spectroscopy. It was found that the presence of the Boltorn, the PEG, and lactide block lengths both play vital roles in determining the structure‐property relationships in these materials. The ATR‐FTIR studies showed that with increasing lactide segment length, the rate of ester hydrolysis increased due to the increased concentration of the hydrolytically sensitive poly(lactic acid) (PLA) ester groups in the network. However, incorporation of Boltorn into the PLA‐PEG‐PLA copolymer did not significantly change the kinetic rate constant for hydrolysis of the PLA segments. The cytocompatibility of a typical one of these materials in the presence of its degradation by‐products was assessed using cultured osteoblasts from the rat. The hydrogel was degraded for 28 days and found to be cytocompatible with osteoblasts over days 23 to 28 of the hydrolysis period. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 5163–5176     

Synthesis of a new hyperbranched,vinyl macromonomer through the use of click chemistry: Synthesis and characterization of copolymer hydrogels with PEG diacrylate

A new biodegradable, water‐soluble macromonomer based on the commercial hyperbranched polyester Boltorn^®H20 has been synthesized through the use of click chemistry. The macromonomer was developed with the aim of being injected with a comacromonomer, poly(ethylene glycol) (PEG) diacrylate, for in situ copolymerization to form biodegradable polymer hydrogels. Copolymer hydrogels were prepared from the macromonomer and PEG diacrylate (FW 700) by free radical copolymerization. A degree of phase separation of the hydrogels was observed during polymerization and with increasing incorporation of the Boltorn macromonomer an increasing tendency for the formation of macropores was observed. The swelling ratios of the gels in water and phosphate buffered saline solution, PBS, all increase with increasing Boltorn macromonomer concentration, as did the penetrant diffusion coefficients and the degradation rate in PBS. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis and Characterization of Hydrogels Based on Gamma Radiation Copolymerization of N‐isopropylacrylamide and Ethylene Glycol Dimethacrylate Monomers

Hydrogels based essentially on N‐isopropylacrylamide (NIPAAm) and different ratios of ethylene glycol dimethacrylate (EGDMA) monomer were synthesized by gamma radiation copolymerization. The thermal decomposition behavior of NIPAAm/EGDMA hydrogels was determined by thermogravimetric analysis (TGA). The effect of temperature and pH on the swelling behavior was also studied. The results showed that the ratio of EGDMA in the comonomer feeding solution has a great effect on the yield product, gel fraction and water content in the final hydrogel. In this regard, it was observed that the increase of EGDMA ratio decreased these properties. The TGA study showed that all the compositions of NIPAAm/EGDMA hydrogels displayed higher thermal stability than the hydrogel based on pure PNIPAAm hydrogel. The swelling kinetics in water showed that pure PNIPAAm and NIPAAm/EGDMA hydrogels reached equilibrium after 6 h. However, NIPAAm/EGDMA hydrogels show swelling in water lower than pure PNIPAAm. The results showed that the swelling character of pure PNIPAAm and NIPAAm/EGDMA hydrogels was affected by the change in temperature within the temperature range 25–40°C, and showed a reversible change in swelling in the pH range 4–7 depending on composition.     

Electrical response characterisation of poly(ethylene glycol) macromer (PEGM)/chitosan hydrogels in NaCl solution

Interpenetrating polymer network hydrogels composed of poly(ethylene glycol) macromer (PEGM) and chitosan were synthesised by UV irradiation of solutions in a mild aqueous media. The IPN hydrogels exhibited the equilibrium water content (EWC) in the range of 86-94%. The hydrogels were characterised using FT-IR, FT-Raman spectroscopy and differential scanning calorimetry (DSC). The results from DSC measurements indicate that the melting endotherms of PEGM, within the hydrogels, decreased in intensities and shifted to lower temperatures comparing with a linear PEGM. This was due to the decrease of the crystallinity in the IPN hydrogels with higher contents of PEGM. The electrical response of the IPN hydrogels was also investigated by applying electrical current to the hydrogels immersed in a NaCl solution. The extent of a bending degree of the IPN hydrogel depends on the IPN hydrogel composition and applied electric field strength.     

Chemical–physical behavior of hydrogels of poly(vinyl alcohol) and poly(ethylene glycol)

New hydrogels based on polyethylene glycol (PEG) and poly(vinyl alcohol) (PVA) of different degrees of hydrolysis were synthesized. To form the network the PEG was modified at their ends with acyl chloride groups to be used as the crosslinking agent. The compositions of the hydrogels were between 50% and 90% by weight of PEG and PVA of various degrees of hydrolysis were used. It was found that the degree of hydrolysis of the PVA and the PEG content influence the equilibrium water content of the hydrogel. The process of swelling of all the hydrogels prepared followed a second-order kinetics.