Magnetoswitchable reactions of DNA monolayers on electrodes: gating the processes by hydrophobic magnetic nanoparticles

Biorecognition and biocatalytic reactions of DNA monolayers, such as hybridization, polymerization, and hydrolytic digestion, were followed in situ by chronocoulometry and Faradaic impedance spectroscopy. Hydrophobic magnetic nanoparticles attracted to, and retracted from, the electrode surface by an external magnetic field were used to activate and inhibit the DNA-monolayer reactions, respectively. The attraction of the magnetic nanoparticles to the electrode surface generated a hydrophobic thin film on the surface that is not permeable for the water-soluble components required for the DNA-monolayer reactions. This results in the inhibition of the DNA-monolayer reactions. The retraction of the magnetic nanoparticles from the surface regenerated the free nucleic acid-functionalized surface that was exposed to the aqueous solution, thus reactivating the DNA-monolayer reactions. The reversible inhibition and activation of the DNA-monolayer reactions upon the cyclic attraction-retraction of the hydrophobic magnetic nanoparticles may be used to synthesize programmed DNA chips.     

Catalysis by metallic nanoparticles in aqueous solution: model reactions

Catalysis by metallic nanoparticles is certainly among the most intensely studied problems in modern nanoscience. However, reliable tests for catalytic performance of such nanoparticles are often poorly defined, which makes comparison and benchmarking rather difficult. We tackle in this tutorial review a subset of well-studied reactions that take place in aqueous phase and for which a comprehensive kinetic analysis is available. Two of these catalytic model reactions are under consideration here, namely the reduction of (i) p-nitrophenol and (ii) hexacyanoferrate (iii), both by borohydride ions. Both reactions take place at the surface of noble metal nanoparticles at room temperature and can be accurately monitored by UV-vis spectroscopy. Moreover, the total surface area of the nanoparticles in solution can be known with high precision and thus can be directly used for the kinetic analysis. Hence, these model reactions represent cases of heterogeneous catalysis that can be modelled with the accuracy typically available for homogeneous catalysis. Both model reactions allow us to discuss a number of important concepts and questions, namely the dependence of catalytic activity on the size of the nanoparticles, electrochemistry of nanoparticles, surface restructuring, the use of carrier systems and the role of diffusion control.     

Synthesis of monofunctionalized gold nanoparticles by fmoc solid-phase reactions

In this communication, solid-phase reactions for the synthesis of Lys-monofunctionalized gold nanoparticles are described. A controlled and selective fabrication of linear nanoparticle arrays can be achieved through peptide linkage systems, and therefore it is essential to prepare Fmoc amino acid nanoparticle building blocks susceptible to Fmoc solid-phase peptide synthesis. Gold nanoparticles containing carboxylic acids (2) in the organic shell were covalently ligated to Lys on solid supports through amide bond coupling reactions. We employed Fmoc-Lys-substituted polymer resins such as Fmoc-Lys-Wang or Fmoc-Lys-HMPA-PEGA. The low density of Lys on the matrix enabled 2 nm-sized gold nanoparticles to react with Lys in a 1:1 ratio. Subsequent cleavage reactions using 60% TFA reagent resulted in Lys transfer from the solid matrix to gold nanoparticles, and the Fmoc-Lys-monofunctionalized gold nanoparticles (5) were obtained with 3-15% yield. Synthesis using HMPA-PEGA resin increased productivity due to the superior swelling properties of PEGA resin in DMF. Monofunctionalization of nanoparticles was microscopically characterized using TEM for the ethylenediamine-bridged nanoparticle dimers (6). By counting the number of 6, we found that at least 60% of cleaved nanoparticles were monofunctionalized by Lys. This method is highly selective and efficient for the preparation of monofunctionalized nanoparticles.     

Bimetallic PdAu nanoparticles as hydrogenation catalysts in imidazolium ionic liquids

Metallic and bimetallic PdAu nanoparticles were solubilized in 1-butyl-3-methylimidazolium hexafluorophosphate ionic liquid (IL) by a phase-transfer method using poly(vinylpyrrolidone) (PVP) as a stabilizer. Nanoparticles were characterized by UV–vis spectroscopy and transmission electron microscopy. The bimetallic PdAu nanoparticles in the IL-phase were examined as catalysts for hydrogenation reactions; both the activity and selectivity of the hydrogenation reactions could be tuned by varying the composition of the bimetallic nanoparticles, with maximum activities seen at 1:3 Au:Pd ratios. These nanoparticles/IL catalysts were recycled and then reused for further catalytic reactions with minimal loss in activity.     

Inductive heating with magnetic materials inside flow reactors

Superparamagnetic nanoparticles coated with silica gel or alternatively steel beads are new fixed-bed materials for flow reactors that efficiently heat reaction mixtures in an inductive field under flow conditions. The scope and limitations of these novel heating materials are investigated in comparison with conventional and microwave heating. The results suggest that inductive heating can be compared to microwave heating with respect to rate acceleration. It is also demonstrated that a very large diversity of different reactions can be performed under flow conditions by using inductively heated flow reactors. These include transfer hydrogenations, heterocyclic condensations, pericyclic reactions, organometallic reactions, multicomponent reactions, reductive cyclizations, homogeneous and heterogeneous transition-metal catalysis. Silica-coated iron oxide nanoparticles are stable under many chemical conditions and the silica shell could be utilized for further functionalization with Pd nanoparticles, rendering catalytically active heatable iron oxide particles.     

Nanocrystalline gold and gold-palladium alloy oxidation catalysts: a personal reflection on the nature of the active sites

The discoveries that supported gold nanoparticles are exceptionally efficient catalysts for a whole range of reactions is one of the most surprising revelations in the recent history of chemistry. For many years gold was considered too noble to be chemically interesting. However, when divided to the nano-scale, small gold nanoparticles comprising relatively few atoms, are very efficient in catalysing a range of redox and chemical synthesis reactions. In this perspectives article some of the recent research in this rapidly evolving field is highlighted, and the nature of the active site for oxidation reactions is commented on.     

磁性纳米粒子负载钯催化有机合成反应研究进展

磁性纳米粒子负载钯催化的有机合成反应,由于具有催化活性高,催化剂在外加磁场作用下即可快速分离和重复使用等特点,已引起了人们的广泛关注.综述了近年来磁性纳米粒子负载钯催化有机合成反应的研究进展,载体包括Fe3O4纳米粒子、有机小分子修饰的磁性纳米粒子、SiO2包覆的磁性纳米粒子、碳修饰磁性纳米粒子、羟基磷灰石包覆的磁性纳米粒子和有机高分子修饰的磁性纳米粒子等.     

Pd nanoparticles supported on amphiphilic porous organic polymer as an efficient catalyst for aqueous hydrodechlorination and Suzuki-Miyaura coupling reactions

Developing efficient and recyclable heterogeneous catalysts for organic reactions in water is important for the sustainable development of chemical industry. In this work, Pd nanoparticles supported on DABCO-functionalized porous organic polymer was successfully prepared through an easy copolymerization and successive immobilization method. Characterization results indicated that the prepared catalyst featured big surface area, hierarchical porous structure, and excellent surface amphiphilicity. We demonstrated the use of this amphiphilic catalyst in two case reactions, i.e. the aqueous hydrodechlorination and Suzuki-Miyaura coupling reactions. Under mild reaction conditions, the catalyst showed high catalytic activities for the two reactions. In addition, the catalyst could be easily recovered and reused for several times. Also, no obvious Pd leaching and aggregation of Pd nanoparticles occurred up during the consecutive reactions.     

Catalytic properties of supported gold nanoparticles in organic syntheses

Gold nanoparticles exhibit unique properties due to their ability to form aggregates of atoms of diverse morphology shapes and sizes of which depend, to a considerable extent, on specific features of the nearest environment. The nature of gold nanoparticles varies in a wide range: from the particles with pronounced Lewis acidic properties to the negatively charged particles bearing a formal zero-valence charge. The most examples of new reactions catalyzed by gold nanoparticles include unsaturated compounds and strong nucleophiles (such as amines) as substrates. This short review provides a digest of the catalytic properties of gold nanoparticles. The main attention is paid to the possible role of certain forms of the metal in catalytic reactions. Of special interest are reactions in which effects of synergism of gold and other active species or second metals present in the catalyst are revealed or a size effect is established.     

Reagentless functionalization of gold nanoparticles via a 3 + 2 Huisgen cycloaddition

A mild method for functionalization of gold nanoparticles is reported. The reactions of azide functionalized nanoparticles with propynoic acid derivatives provide triazole functionalized nanoparticles under very mild reaction conditions. Characterization of the nanoparticle-bound triazoles using (1)H and (13)C NMR spectroscopy indicates that both the 1,4 and 1,5 triazole regioisomers are formed on the nanoparticle surface.     

Cobalt-rhodium heterobimetallic nanoparticle-catalyzed reactions

Transition metal nanoparticles have attracted a great deal of attention. This review discusses the synthesis of heterobimetallic cobalt-rhodium nanoparticles and their use as catalysts in organic transformations. Co-Rh nanoparticles (Co2Rh2) with a fixed stoichiometry (2 : 2) were easily obtained from Co2Rh2(CO)12. These nanoparticles were quite effective catalysts for carbonylation reactions. Particularly, special focus is paid to the Pauson-Khand-type reaction.     

Nanoparticle films as electrodes: voltammetric sensitivity to the nanoparticle energy gap

Electron-transfer reactions of redox solutes at electrode/solution interfaces are facilitated when their formal potentials match, or are close to, the energy of an electronic state of the electrode. Metal electrodes have a continuum of electronic levels, and redox reactions occur without restraint over a wide span of electrode potentials. This paper shows that reactions on electrodes composed of films of metal nanoparticles do have constraints when the nanoparticles are sufficiently small and molecule-like so as to exhibit energy gaps, and resist electron transfers with redox solutes at potentials within the energy gap. When solute formal potentials are near the electronic states of the nanoparticles in the film, electron-transfer reactions can occur. The electronic states of the nanoparticle film electrodes are reflected in the formal potentials of the electrochemical reactions of the dissolved nanoparticles at naked metal electrodes. These ideas are demonstrated by voltammetry of aqueous solutions of the redox solutes methyl viologen, ruthenium hexammine, and two ferrocene derivatives at films on electrodes of 1.1 nm core diameter Au nanoparticles coated with protecting monolayers of phenylethanethiolate ligands. The methyl viologen solute is unreactive at the nanoparticle film electrode, having a formal potential lying in the nanoparticle's energy gap. The other solutes exhibit electron transfers, albeit slowed by the electron hopping resistance of the nanoparticle film. The nanoparticles are not linked together, being insoluble in the aqueous medium; a small amount of an organic additive (acetonitrile) facilitates observing the redox solute voltammetry.     

In Situ Formation of Gold Nanoparticles within a Polymer Particle and Their Catalytic Activities in Various Chemical Reactions

Composite materials consisting of nanoscale gold particles and protective polymer shells were designed and tested as catalysts in various chemical reactions. Initially, the systematic incorporation of multiple gold nanoparticles into a poly(N-isopropylacrylamide) particle was achieved by an in situ method under light irradiation. The degree of gold nanoparticle loading, along with the structural and morphological properties, was examined as a function of the amount of initial gold ions and reducing agent. As these gold nanoparticles were physically-embedded within the polymer particle in the absence of strong interfacial interactions between the gold nanoparticles and polymer matrix, the readily-accessible surface of the gold nanoparticles with a highly increased stability allowed for their use as recyclable catalysts in oxidation, reduction, and coupling reactions. Overall, the ability to integrate catalytically-active metal nanoparticles within polymer particles in situ allows for designing novel composite materials for multi-purpose catalytic systems.     

A yolk-shell nanoreactor with a basic core and an acidic shell for cascade reactions

Smart yolk-shell nanoparticles (hollow nanoparticles with a movable core) with an acidic shell and a basic core were fabricated through an organosilane-assisted selective etching method and acted as efficient nanoreactors for catalyzing a deacetalization-Henry cascade reaction with high activity and high selectivity. This strategy is very promising for the design of multifunctional nanoreactors for cascade reactions.     

Modular approach to functional hyaluronic acid hydrogels using orthogonal chemical reactions

A modular approach for the synthesis of hyaluronic acid hydrogels using orthogonal chemoselective reactions for subsequent enzymatic decomposition to nanoparticles is described.     

Synthesis of Cu2O coated Cu nanoparticles and their successful applications to Ullmann-type amination coupling reactions of aryl chlorides

We synthesized uniform Cu2O coated Cu nanoparticles from the thermal decomposition of copper acetylacetonate followed by air oxidation and used these nanoparticles as catalysts for Ullmann type amination coupling reactions of aryl chlorides     

Synthesis of Surface-Modified Nanoparticles via Cycloaddition-Reactions

The surface modification of nanoparticles via azide/alkine-1,3-dipolar cycloaddition-reactions is described. Ligand exchange onto various nanoparticles was monitored by ¹H NMR spectroscopy and formed the basis for the attachment of ligands onto the nanoparticles and their subsequent modification by dipolar cycloaddition reactions. Nanoparticle-surfaces were monitored by binding onto self-assembled monolayers derivatized with matching supramolecular interactions after derivatization.     

Superparamagnetic nanoparticle-supported catalysis of Suzuki cross-coupling reactions

Emulsion polymerization was examined as a novel route for the synthesis of core/shell superparamagnetic nanoparticles consisting of a highly crystalline gamma-Fe2O3 core and a very thin polymeric shell wall. These nanoparticles were used as soluble supports for immobilizing Pd catalysts to promote Suzuki cross-coupling reactions. Recovery of catalysts was facilely achieved by applying a permanent magnet externally. Isolated catalysts were reused for new rounds of reactions without significant loss of their catalytic activity.     

Textural manipulation of mesoporous materials for hosting of metallic nanocatalysts

The preparation and stabilization of nanoparticles are becoming very crucial issues in the field of so-called "nanocatalysis". Recent developments in supramolecular self-assembled porous materials have opened a new way to get nanoparticles hosted in the channels of such materials. In this paper, a new approach towards monodisperse and thermally stable metal nanoparticles by confining them in ordered mesoporous materials is presented, and three aspects are illustrated. Firstly, the recent progress in the functional control of mesoporous materials will be briefly introduced, and the rational tuning of the textures, pore size, and pore length is demonstrated by controlling supramolecular self-assembly behavior. A novel synthesis of short-pore mesoporous materials is emphasized for their easy mass transfer in both biomolecule absorption and the facile assembly of metal nanocomposites within their pore channels. In the second part, the different routes for encapsulating monodisperse nanoparticles inside channels of porous materials are discussed, which mainly includes the ion-exchange/conventional incipient wetness impregnation, in situ encapsulation routes, organometallic methodologies, and surface functionalization schemes. A facile in situ autoreduction route is highlighted to get monodisperse metal nanoparticles with tunable sizes inside the channels of mesoporous silica. Finally, confinement of mesoporous materials is demonstrated to improve the thermal stability of monodisperse metal nanoparticles catalysts and a special emphasis will be focused on the stabilization of the metal nanoparticles with a low Tammann temperature. Several catalytic reactions concerning the catalysis of nanoparticles will be presented. These uniform nanochannels, which confine monodisperse and stable metal nanoparticles catalysts, are of great importance in the exploration of size-dependent catalytic chemistry and further understanding the nature of catalytic reactions.     

An efficient and recyclable water-soluble cyclopalladated complex for aqueous Suzuki reactions under aerial conditions

Several water-soluble cyclopalladated complexes with five- or six-membered rings have been prepared as air-stable solids from Schiff base ligands bearing an N-phenyl sulfonate groups. Cyclopalladated complexes with six-membered rings show high catalytic efficiency for the Suzuki reactions of aryl bromides with phenylboronic acid in aqueous solvents under mild conditions. Palladium complex 1 can be used for five reaction cycles in high conversions for the Suzuki reactions in neat water without additives. The catalytic process for the Suzuki couplings is proved by TEM analysis to proceed on Pd(0) nanoparticles. Surfactant-protected palladium nanoparticles present lower activities and poorer recyclability for the coupling reactions than those generated in situ without additives.