Effects of preadsorbed oxygen on the formation and decomposition of NCO on Rh(111) surfaces

The interaction of HNCO with oxygen dosed Rh(111) surface has been investigated by Auger electron, electron energy loss and thermal desorption spectroscopy. The presence of adsorbed oxygen exerted no apparent influence on the weakly adsorbed HNCO (T_p = 130 K). It promoted, however, the dissociative adsorption of HNCO by forming a strong O—H bond which prevented the associative desorption of HNCO. As a result no H₂ and NH₃ formation occurred, in contrast with the clean surface, and the surface concentration of irreversibly bonded NCO was also increased. New products of the surface reaction were H₂O and CO₂, in addition to CO and N₂ observed on a clean surface. From the behavior of the losses characteristic for the adsorbed NCO it appeared that the preadsorbed oxygen exerted a significant stabilizing effect on the NCO bonded to the Rh.     

A mimic model of Pt---Rh catalyst prepared by electrochemical deposition of Rh on the Pt(100) surface

Electrochemical deposition of Rh ions on a (5 × 20) Pt(100) surface gave a (1 × 1) LEED pattern with high background intensity. By exposing the (1 × 1) Rh/Pt(100) surface to O₂ or NO, a characteristic p(3 × 1) Rh---O overlayer is built up at about 400 K, which is the same structure observed on the Pt_0.25Rh_0.75(100) surface exposed to NO or O₂. Once the p(3 × 1) Rh---O overlayer is formed, a reversible structural change, ,p(3 × 1) (1 × 1), can be caused at room temperature by adding H₂ and O₂. The p(3 × 1) Rh---O overlayer on the Pt(100) surface may represent a highly efficient catalyst for NO_x reduction.     

Effects of fly ash on NOx removal by pulsed streamers

NO_x removal methods using plasma chemical reactions in nonthermal plasmas have been widely studied. In this paper, the effects of the addition of fly ash on NO_x removal using short-pulsed discharge plasmas are described. Fly ash which had been collected from a coal-burning thermal electrical power plant was used. Experiments were performed using four different mixtures of gases which included NO. These were (N₂+NO), (N₂+NO+O₂), (N₂+NO+H₂O), and (N₂+NO+O₂+H ₂O). These gas mixtures were used either with or without the addition of fly ash. The initial concentration of NO was fixed at 200 ppm (NO parts per million of the gas mixture), The study of the NO_x (NO+NO₂) removal was performed with the fly ash, as it is relevant to real situations in coal power plants. The results show that the presence of fly ash decreased the NO_x removal rate slightly in the case of dry gas mixtures while it increased the NO_x removal rate substantially in the case of wet gas mixtures. These results suggest that the presence of fly ash in the flue gases, which also contain a few percentages of moisture, would be advantageous to the treatment of flue gases emitted from thermal power plants for the removal of nitrogen oxides     

CO吸附和加氢反应过程的原位高压MAS NMR研究

应用原位变温高压MAS核磁共振技术,对比研究了CO在不同Rh基催化剂上的吸附和加氢反应过程. ²⁹Si MAS NMR研究结果表明：Rh基催化剂中加入金属助剂后,载体Silicate-1上的表面硅羟基减少,助剂金属与硅羟基作用锚锭在载体表面.¹³C MAS NMR研究结果表明：当引入CO/H2混合气后,在Rh/Silicate-1催化剂上只能观测到气相CO、线式吸附CO和孪式吸附CO的快速交换信号;而在Rh-Mn/Silicate-1和Rh-Mn-Li/Silicate-1催化剂上,还观测到了倾斜式吸附的CO共振信号,表明助剂Mn或Mn-Li的加入促进了CO的吸附. 随着反应温度升高,CO/H₂在Rh/Silicate-1催化剂上转化生成CO_²,进一步升高温度会有CH₄生成;而CO/H₂在RhMnLi/Silicate-1催化剂上反应活性更高,在较低的温度下就会转化生成CO₂,但未观测到甲烷的生成. ¹H MAS NMR 谱显示,反应后载体Silicate-1上硅羟基的量会减少,表明CO与载体部分表面硅羟基反应生成了CO₂.     

聚芳醚酮链扩展单体及单分散齐聚物的分子结构研究

为了全面表征聚芳醚酮齐聚物及高聚物分子结构,本文合成了系列链扩展单体及单分散齐聚物,以¹³C NMR对其在DMSO-d₆(或DMSO-d₆+CDCl₃),及H₂SO₄-d₂(或H₂SO₄)中进行对比研究,表明:它们溶于H₂SO₄时,分子结构发生明显极化.量子化学计算及动态¹³C NMR研究表明,极化是H₂SO₄的正极性磺酸基诱导分子链的氧原子电荷进而诱导芳环电子离域产生的,而非磺化所致.说明极化有普遍意义并提出标题化合物的极化方式,其实际意义明确.     

Evidence for bicarbonate formation on vacuum annealed TiO2(110) resulting from a precursor-mediated interaction between CO2 and H2O

The reaction of CO₂ and H₂O to form bicarbonate (HCO⁻₃) was examined on the nearly perfect and vacuum annealed surfaces of TiO₂(110) with temperature programmed desorption (TPD), static secondary ion mass spectrometry (SSIMS) and high resolution electron energy loss spectrometry (HREELS). The vacuum annealed TiO₂(110) surface possesses oxygen vacancy sites that are manifested in electronic EELS by a loss feature at 0.75 V. These oxygen vacancy sites bind CO₂ only slightly more strongly (TPD peak at 166 K) than do the five-coordinated Ti⁴⁺ sites (TPD peak at 137 K) typical of the nearly perfect TiO₂(110) surface. Vibrational HREELS indicates that CO₂ is linearly bound at the latter sites with a ν_a(OCO) frequency similar to the gas phase value. In contrast, oxygen vacancies dissociate H₂O to bridging OH groups which recombine to liberate H₂O in TPD at 490 K. No evidence for a reaction between CO₂ and H₂O is detected on the nearly perfect surface. In sequentially dosed experiments on the vacuum annealed surface at 110 K, CO₂ adsorption is blocked by the presence of preadsorbed H₂O, adsorbed CO₂ is displaced by postdosed H₂O, and there is little or no evidence for bicarbonate formation in either case. However, when CO₂ and H₂O are simultaneously dosed, a new CO₂ TPD state is observed at 213 K, and the 166 K state associated with CO₂ at the vacancies is absent. SSIMS was used to tentatively assign the 213 K CO₂ TPD state to a bicarbonate species. The 213 K CO₂ TPD state is not formed if the vacancy sites are filled with OH groups prior to simultaneous CO₂+H₂O exposure. Sticking coefficient measurements suggest that CO₂ adsorption at 110 K is precursor-mediated, as is known to be the case for H₂O adsorption on TiO₂(110). A model explaining the circumstances under which the proposed bicarbonate species is formed involves the surface catalyzed conversion of a precursor-bound H₂O–CO₂ van der Waals complex to carbonic acid, which then reacts at unoccupied oxygen vacancies to generate bicarbonate, but falls apart to CO₂ and H₂O in the absence of these sites. This model is consistent with the conditions under which bicarbonate is formed on powdered TiO₂, and is similar to the mechanism by which water catalyzes carbonic acid formation in aqueous solution.     

Selective β-elimination in the reaction of 2-propanol to acetone on Rh(111)-p(2 × 1)-O

The formation of acetone from 2-propanol and Rh(111)-p(2 × 1)-O has been investigated by temperature programmed reaction and X-ray photoelectron spectroscopies and isotopic labeling experiments under ultrahigh vacuum conditions. Some 2-propanol forms 2-propoxide on Rh(111)-p(2× 1)-O below 250 K and selective β (with respect to the metal in 2-propoxide) C-H bond breaking at 270 K is the primary path for acetone evolution. A minor amount of reversible C-H bond activation is also observed. β-carbon-hydrogen bond breaking is proposed to be the rate-limiting step for the initial acetone evolution from 2-propanol on Rh(111)-p(2× 1)-O at high coverage based on kinetic isotope effects. The rate of acetone evolution is in part rate-limited by desorption, however, for low 2-propanol exposures. In addition, there is some oxygen exchange between the surface and the acetone at 320 K. Combustion to H₂O, CO and CO₂is a competing pathway. Irreversible γ-C-H bond breaking primarily leads to combustion. The reactivity of 2-propanol on the (2 × 1)-O surface is dramatically different from that on clean Rh(111), where nonselective decomposition to CO and H₂ is induced. The inhibition of extensive, nonselective C-H and C-C bond breaking is a crucial factor in determining the selectivity for β-dehydrogenation to produce acetone.     

采用ICP-MS/MS准确测定食品中钙和氯

建立利用电感耦合等离子体串联质谱测定食品中钙和氯的分析方法。针对Ca的高丰度同位素40Ca受到来自等离子气40Ar的干扰,35Cl受到来自16O18OH的严重干扰,在MS/MS模式下,利用碰撞/反应池技术,以H₂为反应气,使40Ar+与H₂发生反应,而40Ca+不与H₂发生反应,利用H₂原位质量法消除40Ar+对40Ca+的干扰;而35Cl+则能与H₂发生质量转移反应生成H₂35Cl+,通过测定H₂35Cl+消除16O18OH+对35Cl+的干扰。Ca和Cl在0.0~100.0 μg·L-1的浓度范围内线性关系良好,线性相关系数（R2）≥0.999 9,Ca和Cl的检出限分别为0.061和2.32 μg·L-1。采用系列国家标准物质验证了对方法的准确性和精密度,其测定结果与标准参考物质的认定值基本一致,表明方法的准确性好、精密度高。所建立的新方法可实现食品中钙和氯的准确测定。     

圆筒内氢等离子体非定常化学反应羽流场DSMC分析

利用直接模拟Monte Carlo方法研究圆筒侧壁注入氢等离子体羽流场在8×10^-6s内的非定常流动特性.根据Bird的化学反应模型考虑离解-复合反应模型和电荷转移反应模型.在流场中注入H₂、H、金属原子X、H₂⁺和H⁺五种组分,研究离解-复合反应对流场中粒子分布和密度的影响,结果表明离解-复合反应使H₂数密度降低,H数密度增加,说明在流场中H₂的离解反应速率大于H的复合反应速率.加入电荷转移反应后H₂⁺数密度降低,H⁺数密度增加,对其他组分数密度没有显著影响.     

Monte Carlo simulations of oscillations, chaos and pattern formation in heterogeneous catalytic reactions

Experimental studies employing surface science methods indicate that kinetic oscillations, chaos, and pattern formation in heterogeneous catalytic reactions often result from the interplay of rapid chemical reaction steps and relatively slow complementary processes such as oxide formation or adsorbate-induced surface restructuring. In general, the latter processes should be analysed in terms of theory of phase transitions. Therefore, the conventional mean-field reaction–diffusion equations widely used to describe oscillations in homogeneous reactions are strictly speaking not applicable. Under such circumstances, application of the Monte Carlo method becomes almost inevitable. In this review, we discuss the advantages and limitations of employing this technique and show what can be achieved in this way. Attention is focused on Monte Carlo simulations of CO oxidation on (1 0 0) and (1 1 0) single-crystal Pt and polycrystal Pt, Pd and Ir surfaces and of NO reduction by CO and H₂ on Pt(1 0 0). CO oxidation on supported nanometre-sized catalyst particles and NO reduction on composite catalysts are also discussed. The results show that with current computer facilities the MC technique has become an effective tool for analysing temporal oscillations and pattern formation on the nanometre scale in catalytic reactions occurring on both single crystals and supported particles.     

Enhancement of dissociation by metal-support interaction: reaction of NO on Rh supported by ceria films of controlled oxidation state

Highly oriented thin films of cerium oxide with variable ratio of Ce³⁺/Ce⁴⁺ were grown on Ru(0 0 0 1) single crystal surface and loaded with a fixed, low coverage of Rh. The chemisorption of NO on the resulting model catalyst was studied by soft X-ray photoemission which yielded the relative quantities of N containing species on the surface as a function of temperature, and by thermal desorption which yielded the relative yields of NO and N₂ desorbed. It is found that the ability of the reduced Rh clusters to dissociate NO depends upon the oxidation state of the ceria upon which it is deposited, and for highly reduced ceria surfaces effectively 100% of Rh-adsorbed NO dissociates by 350 K. Possible causes of this surprising behavior are discussed.     

Structural effects on water formation from coadsorbed H + O on Rh(100)

The effect of adsorbate coverage, adsorption sequence and temperature on the structure, composition and reactivity of coadsorbed layers, produced by dissociative adsorption of O₂ and H₂ at 200 K on a Rh(100) surface, has been studied by combined TPD, XPS and LEED measurements. The emphasis is on the impact of the structure and composition of the mixed O + H layers on the synthesis of hydroxyl and water as a result of the O + H surface reaction. The difference in the O 1s binding energies of adsorbed O (529.9 eV) and OH species (530.8 eV) was used as a fingerprint to monitor the formation of the OH species. The H₂O TPD spectra show substantial variations of the desorption temperature range and the amount of water evolved with coadsorbate coverage and structure: from 270 to 350 K and from 0 to 0.08 ML, respectively. It has been found that dense O + H adlayers, where the O coverage is in the range 0.25-0.4 ML, favor the formation of stable OH species. The maximum amount of stable hydroxyl OH species ( 0.16 ML) can be produced by heating of these dense adlayers to 260 K. This results in reordering of the adspecies to form a new O + OH − (2 × 6) structure, where hydroxyls react readily to evolve 0.08 ML of water in a sharp desorption peak at 280 K. The effect of the adlayer density and restructuring on the production of OH and H₂O is discussed.     

Stereodynamics study of the H′（^2S） ＋ NH（X^3∑-） 〉 N（4S） ＋ H2 reaction

The stereodynamics and reaction mechanism of the H′（^2S） ＋ NH （X^3∑^-） → N（^4S） ＋ H2 reaction are thoroughly studied at collision energies in the 0.1 eV-1.0 eV range using the quasiclassical trajectory （QCT） on the ground 4A″ potential energy surface （PES）. The distributions of vector correlations between products and reagents P（φr）, P（φr） and P（φr,φr） are presented and discussed. The results indicate that product rotational angular momentum j′ is not only aligned, but also oriented along the direction perpendicular to the scattering plane; further, the product H2 presents different rotational polarization behaviors for different collision energies. Furthermore, four polarization-dependent differential cross sections （PDDCSs） of the product He are also calculated at different collision energies. The reaction mechanism is analyzed based on the stereodynamics properties. It is found that the abstraction mechanism is appropriate for the title reaction.     

加压原位NMR技术及其应用的研究

介绍了一种风动式加压原位核磁测试管,其可在加温加压条件下(压力1~5.0MPa,温度-70~150℃),在化学反应的同时,捕捉各种稳定或不稳定的反应中间物,产物和反应物的NMR谱.同时报道了该技术在一些研究中的应用.     

Electrical conductivity and defect structure of Mg-doped Cr2O3

The electrical conductivity of Cr₂O₃ nominally doped with 2 mol% MgO has been studied by the four point a.c. technique as a function of the oxygen activity (O₂ + Ar, CO + CO₂ and H₂ + H₂O) in the temperature range 400–1200 °C. It is concluded that Cr₂O₃ doped with MgO is an extrinsic conductor and that the dissolved Mg-dopant is compensated by the formation of electron holes at near atmospheric oxygen pressures and by oxygen vacancies (or possibly interstitial chromium ions) at highly reduced oxygen activities (in CO + CO₂ and H₂ + H₂O gas mixtures). In H₂ + H₂O mixtures Mg-doped chromia also dissolves hydrogen as protons and significantly affects the defect structure and electrical conductivity. The defect structure of the oxide under various conditions is discussed.     

第一性原理研究O2在TiN4掺杂石墨烯上的氢化

作为一种新型高效质子交换膜燃料电池阴极材料, 金属与N共掺杂的石墨烯因其对氧还原反应具有较高的活性而引起了人们的广泛关注. 采用包含色散力校正的密度泛函理论方法系统地研究了O₂在TiN₄掺杂的Graphene上的吸附, 氢化特性. 结果表明: 1) O₂倾向于以side-on模式吸附在Ti顶位, 形成O-Ti-O三元环结构; 2) O₂在TiN₄-Graphene上更倾向于以分子形式直接氢化, 形式OOH结构, 并进一步解离为O+OH, 反应的限速步为O₂的氢化, 对应的反应势垒为0.52 eV.     

新型红色荧光粉Na2Ca4(PO4)2SiO4:Eu3+,Bi3+的制备及发光特性

用高温固相法合成了用于白光LED的Na2Ca4(1-x-y)(PO4)2SiO4:xEu3+,yBi3+红色荧光粉.研究了助熔剂H3BO3、二次煅烧时间和稀土掺杂量等制备条件对样品发光性质的影响.结果表明,在1 200℃、助熔剂H3BO3加入量为样品质量的3.8%时可得到更有利于发光的α-NCPS基质,而且掺入Eu3+...     

A quantum chemical study of ZrO2 atomic layer deposition growth reactions on the SiO2 surface

Zirconium oxide (ZrO₂) is one of the leading candidates to replace silicon oxide (SiO₂) as the gate dielectric for future generation metal-oxide-semiconductor (MOS) based nanoelectronic devices. Experimental studies have shown that a 1–3 monolayer SiO₂ film between the high permittivity metal oxide and the substrate silicon is needed to minimize electrical degradation. This study uses density functional theory (DFT) to investigate the initial growth reactions of ZrO₂ on hydroxylated SiO₂ by atomic layer deposition (ALD). The reactants investigated in this study are zirconium tetrachloride (ZrCl₄) and water (H₂O). Exchange reaction mechanisms for the two reaction half-cycles were investigated. For the first half-reaction, reaction of gaseous ZrCl₄ with the hydroxylated SiO₂ surface was studied. Upon adsorption, ZrCl₄ forms a stable intermediate complex with the surface SiO₂–OH^* site, followed by formation of SiO₂–O–Zr–Cl^* surface sites and HCl. For the second half-reaction, reaction of H₂O on SiO₂–O–Zr–Cl^* surface sites was investigated. The reaction pathway is analogous to that of the first half-reaction; water first forms a stable intermediate complex followed by evolution of HCl through combination of a Cl atom from the surface site and an H atom from H₂O. The results reveal that the stable intermediate complexes formed in both half-reactions can lead to a slow film growth rate unless process parameters are adjusted to lower the stability of the complex. The energetics of the two half-reactions are similar to those of ZrO₂ ALD on ZrO₂ and as well as the energetics of ZrO₂ ALD on hydroxylated silicon. The energetics of the growth reactions with two surface hydroxyl sites are also described.     

Nd L-shell x-ray emission induced by light ions

The L-shell x-ray of Nd has been obtained for 300-600 keV He²⁺ ions impacting, and compared with that produced by H⁺ and H₂⁺ ions. The threshold of projectile kinetic energy for L-shell ionization of Nd is crudely verified in the energy region of about 300-400 keV. It is found that the energy of the distinct L-subshell x-rays has a blue shift. The relative intensity ratios of Lβ_{1, 3, 4} and Lβ_{2, 15} to Lα_{1, 2} x-ray are enlarged compared to the atomic data, and they decrease with the increase of the incident energy, and increase with increasing the effective nuclear charge of the incident ions. That is interpreted by the multiple ionization of outer-shells induced by light ions.     

H$lt;sub$gt;2$lt;/sub$gt;$lt;sup$gt;+$lt;/sup$gt;在强激光场中的解离及其量子调控的理论研究

利用非波恩-奥本海默近似的三维含时量子波包法,理论研究了氢分子离子在强激光场中的解离动力学.通过分析H₂⁺在不同的初始振动态（ν=0–9）和激光场强度下的解离核动能谱,得到了H₂⁺的光解离机理及其随激光场的变化规律.研究结果表明：当激光场的强度I₁=5.0×10¹³ W/cm²时,分子的解离来源于高振动态ν=5–9,其解离机理主要是通过键软化、键硬化和阈下解离过程.当激光场的强度I₂=1.0×10¹⁴ W/cm² 时,H₂⁺在低振动态ν=3–4上的阈上解离起主导作用,而高振动态的键软化、键硬化和阈下解离所占的比重明显地下降了.研究结果为后续的量子调控的实验研究提供了科学的理论预测和指导. 关键词： 光解离 氢分子离子 含时波包法 核动能谱