Electrocatalytic Reduction of Oxygen at Anthraquinonedisulfonate/Polypyrrole Composite Film Modified Electrodes and Its Application to the Electrochemical Oxidation of Azo Dye

We report here the electrocatalytic reduction of oxygen on thin anthraquindisulfonate (AQDS)/poplypyrrole (PPy) composite film modified electrodes and its application to the electrooxidation of azo dye‐amaranth. The polymer‐coated cathode exhibited good electrocatalytic activity towards oxygen reduction reaction (ORR), and allowed the formation of strong oxidant hydroxyl radical (^.OH) in the medium via Electro‐Fenton's reaction between cathodically generated H₂O₂ and added or regenerated Fe²⁺. The electrochemical behaviors of ORR in various pH solutions were described using cyclic voltammetry (CV), rotating disk electrode (RDE) and chronoamperometric (CA) techniques. The effect of solution pH on amaranth mineralization by the Fe²⁺/H₂O₂ and Fe³⁺/H₂O₂ electrooxidation systems was studied. In addition, the long‐term electrocatalytic activity and stability of the AQDS/PPy composite film during multiple experimental runs were also examined electrochemically.     

Local Activities of Hydroxide and Water Determine the Operation of Silver‐Based Oxygen Depolarized Cathodes

Local ion activity changes in close proximity to the surface of an oxygen depolarized cathode (ODC) were measured by scanning electrochemical microscopy (SECM). While the operating ODC produces OH^? ions and consumes O₂ and H₂O through the electrocatalytic oxygen reduction reaction (ORR), local changes in the activity of OH^? ions and H₂O are detected by means of a positioned Pt microelectrode serving as an SECM tip. Sensing at the Pt tip is based on the pH‐dependent reduction of PtO and obviates the need for prior electrode modification steps. It can be used to evaluate the coordination numbers of OH^? ions and H₂O, and the method was exploited as a novel approach of catalyst activity assessment. We show that the electrochemical reaction on highly active catalysts can have a drastic influence on the reaction environment.     

A Membrane-Free Neutral pH Formate Fuel Cell Enabled by a Selective Nickel Sulfide Oxygen Reduction Catalyst

Polymer electrolyte membranes employed in contemporary fuel cells severely limit device design and restrict catalyst choice, but are essential for preventing short-circuiting reactions at unselective anode and cathode catalysts. Herein, we report that nickel sulfide Ni₃S₂ is a highly selective catalyst for the oxygen reduction reaction in the presence of 1.0 m formate. We combine this selective cathode with a carbon-supported palladium (Pd/C) anode to establish a membrane-free, room-temperature formate fuel cell that operates under benign neutral pH conditions. Proof-of-concept cells display open circuit voltages of approximately 0.7 V and peak power values greater than 1 mW cm⁻², significantly outperforming the identical device employing an unselective platinum (Pt) cathode. The work establishes the power of selective catalysis to enable versatile membrane-free fuel cells.     

Investigation of Pt catalytic effects on carbon support corrosion of the cathode catalyst in PEM fuel cells using DEMS spectra

Differential electrochemical mass spectrometry (DEMS) spectra of cathode exhaust gases, CO₂, H₂ and O₂, are presented for the first time to characterize the Pt redox reactions and Pt-catalyzed oxygen reduction reaction (ORR), as well as correlate them to carbon support corrosion (CSC) of the cathode catalyst in a real proton exchange membrane fuel cell (PEMFC). Furthermore, different oxidation states of Pt with catalytic capacity for CSC are indicated.     

A Membrane‐Free Neutral pH Formate Fuel Cell Enabled by a Selective Nickel Sulfide Oxygen Reduction Catalyst

Polymer electrolyte membranes employed in contemporary fuel cells severely limit device design and restrict catalyst choice, but are essential for preventing short‐circuiting reactions at unselective anode and cathode catalysts. Herein, we report that nickel sulfide Ni₃S₂ is a highly selective catalyst for the oxygen reduction reaction in the presence of 1.0 m formate. We combine this selective cathode with a carbon‐supported palladium (Pd/C) anode to establish a membrane‐free, room‐temperature formate fuel cell that operates under benign neutral pH conditions. Proof‐of‐concept cells display open circuit voltages of approximately 0.7 V and peak power values greater than 1 mW cm⁻², significantly outperforming the identical device employing an unselective platinum (Pt) cathode. The work establishes the power of selective catalysis to enable versatile membrane‐free fuel cells.     

Influences of synthesis route and preparation process on the electrochemical properties of Fe-doped strontium cobaltite

SrCo_0.8Fe_0.2O_3-δ (SCF), as a promising cathode material for intermediate temperature solid oxide fuel cells, possesses a high catalytic activity for the reduction of O₂ to 2O²⁻. The SCF powder was successfully synthesized by the solid state reaction method and Pechini method and characterized using XRD, particle analysis, and electrochemical performance measurements. Smaller-particle-size SCF materials (SCF-P) with single phase are obtained at lower synthesis temperature by the Pechini method and possess better electrochemical performance as compared with those prepared by the solid state reaction method. The reason is that the Pechini method involves the mixing of elements at atomic level, so pure SCF phase formation can be accelerated and showed high electrocatalytic activity. The preparation procedure of SCF cathode was firstly investigated using electrochemical impedance spectroscopy. Results show that the total polarization resistance and the low-frequency resistance decrease gradually with the reduction of the calcination temperature for the SCF cathodes. The SCF-P cathode sintered at 1,000 °C possesses the highest porosity and the best electrochemical performance. It is the result of a comprehensive function of three-phase boundary length, porosity of cathode, and the adhesion between cathode and electrolyte. The charge-transfer process, together with the adsorption, dissociation, and diffusion of oxygen, has a strong influence on the whole reaction process of the cathode. The influence of binder amounts on the performance of the SCF-P cathodes was also studied.     

Structural Modulation on NiCo2S4Nanoarray by N Doping to Enhance 2e-ORR Selectivity for Photothermal AOPs and Zn−O2Batteries**

As a H₂O₂ generator, a 2e⁻ oxygen reduction reaction active electrocatalyst plays an important role in the advanced oxidation process to degrade organic pollutants in sewage. To enhance the tendency of NiCo₂S₄ towards the 2e⁻ reduction reaction, N atoms are doped in its structure and replace S²⁻. The result implies that this weakens the interaction between NiCo₂S₄ and OOH*, suppresses O−O bond breaking and enhances H₂O₂ selectivity. This electrocatalyst also shows photothermal effect. Under photothermal heating, H₂O₂ produced by the oxidation reduction reaction can decompose and releaseOH, which degrades organic pollutants through the advanced oxidation process. Photothermal effect induced by the advance oxidation process shows obvious advantages over the traditional Fenton reaction, such as wide pH adaptation scope and low secondary pollutant due to its Fe²⁺ free character. With Zn as anode and the electrocatalyst as cathode material, a Zn−O₂ battery is assembled. It achieves electricity generation and photothermal effect induced by the advance oxidation process simultaneously.     

Electrocatalytic reduction of CO2 to methanol: Part VIII. Photoassisted electrolysis and electrochemical photocell with n-TiO2 anode

Carbon dioxide has been reduced to methanol with an electrochemical photocell composed of an n-TiO₂ photoanode and a metal complex-confined platinum cathode in the presence of homogeneous catalysts. The feasibility of the reduction of CO₂ with the photocell depended greatly on the pH value of the anolyte. Photocells containing an anolyte of pH 12 led to the formation of methanol in the cathode compartment, and oxygen gas evolved at the photoanode with a high current efficiency. In photocells in which the pH value of the anolyte was smaller than 11, however, CO₂ was reduced only when an external bias was present.     

Redox Processes in Water,Initiated by Electric Discharge over Its Surface

The yields of oxidation, reduction in a flash corona discharge between a solid cathode andthe water surface are compared. As the cathode was used a system of five aluminum electrodes. As the gasmedium were tested air, oxygen, and nitrogen. The models of processes in the discharge suggest formation of atomic hydrogen in water vapor: H₂O H + OH. However, the reduction yield is equal to the Faraday value irrespective of the gas composition. In the presence of oxygen, oxidation prevails. The yield of Fe^{2 +} oxidation in oxygen is about 190 reaction events per electron passed in the circuit; in air it is lower by a factor of 2, and in nitrogen the yield is equal to the Faraday value.     

An Aurivillius Oxide Based Cathode with Excellent CO2 Tolerance for Intermediate‐Temperature Solid Oxide Fuel Cells

The Aurivillius oxide Bi₂Sr₂Nb₂MnO_12?δ (BSNM) was used as a cobalt‐free cathode for intermediate‐temperature solid oxide fuel cells (IT‐SOFCs). To the best of our knowledge, the BSNM oxide is the only alkaline‐earth‐containing cathode material with complete CO₂ tolerance that has been reported thus far. BSNM not only shows favorable activity in the oxygen reduction reaction (ORR) at intermediate temperatures but also exhibits a low thermal expansion coefficient, excellent structural stability, and good chemical compatibility with the electrolyte. These features highlight the potential of the new BSNM material as a highly promising cathode material for IT‐SOFCs.     

CoOOH用作阴极催化剂对非水性锂-氧气电池性能的影响

利用工艺简单,成本低廉的共沉淀法制得CoOOH,并用作非水性锂-氧气电池阴极催化剂。通过恒流充放电、线性伏安扫描（LSV）和电化学阻抗（EIS）测试研究了电极的电化学性能。结果表明：由于CoOOH能够明显提高氧气还原反应（ORR）的催化活性,与未使用CoOOH的电极相比较,使用CoOOH为催化剂的电极首次放电容量高达5 093 mAh·g^-1,提高了1.7倍。电池的充电过电压降低了约460 mV,充电可逆性得到增强,充放电可逆性提高,使得循环性能得到显著改善。     

CoOOH用作阴极催化剂对非水性锂-氧气电池性能的影响

利用工艺简单,成本低廉的共沉淀法制得CoOOH,并用作非水性锂-氧气电池阴极催化剂。通过恒流充放电、线性伏安扫描（LSV）和电化学阻抗（EIS）测试研究了电极的电化学性能。结果表明：由于CoOOH能够明显提高氧气还原反应（ORR）的催化活性,与未使用CoOOH的电极相比较,使用CoOOH为催化剂的电极首次放电容量高达5 093 mAh·g^-1,提高了1.7倍。电池的充电过电压降低了约460 mV,充电可逆性得到增强,充放电可逆性提高,使得循环性能得到显著改善。     

Photo-excited Oxygen Reduction and Oxygen Evolution Reactions Enable a High-Performance Zn–Air Battery

The storage of solar energy in battery systems is pivotal for a sustainable society, which faces many challenges. Herein, a Zn–air battery is constructed with two cathodes of poly(1,4-di(2-thienyl))benzene (PDTB) and TiO₂ grown on carbon papers to sandwich a Zn anode. The PDTB cathode is illuminated in a discharging process, in which photoelectrons are excited into the conduction band of PDTB to promote oxygen reduction reaction (ORR) and raise the output voltage. In a reverse process, holes in the valence band of the illuminated TiO₂ cathode are driven for the oxygen evolution reaction (OER) by an applied voltage. A record-high discharge voltage of 1.90 V and an unprecedented low charge voltage of 0.59 V are achieved in the photo-involved Zn–air battery, regardless of the equilibrium voltage. This work offers an innovative pathway for photo-energy utilization in rechargeable batteries.     

Co-electrolysis of CO_2 and H_2O in high-temperature solid oxide electrolysis cells: Recent advance in cathodes

Co-electrolysis of CO_2 and H_2O using high-temperature solid oxide electrolysis cells(SOECs) into valuable chemicals has attracted great attentions recently due to the high conversion and energy efficiency,which provides opportunities of reducing CO_2 emission, mitigating global warming and storing intermittent renewable energies. A single SOEC typically consists of an ion conducting electrolyte, an anode and a cathode where the co-electrolysis reaction takes place. The high operating temperature and difficult activated carbon-oxygen double-bond of CO_2 put forward strict requirements for SOEC cathode. Great efforts are being devoted to develop suitable cathode materials with high catalytic activity and excellent long-term stability for CO_2/H_2O electro-reduction. The so far cathode material development is the key point of this review and alternative strategies of high-performance cathode material preparation is proposed. Understanding the mechanism of CO_2/H_2O electro-reduction is beneficial to highly active cathode design and optimization. Thus the possible reaction mechanism is also discussed. Especially, a method in combination with electrochemical impedance spectroscopy(EIS) measurement, distribution functions of relaxation times(DRT) calculation, complex nonlinear least square(CNLS) fitting and operando ambient pressure X-ray photoelectron spectroscopy(APXPS) characterization is introduced to correctly disclose the reaction mechanism of CO_2/H_2O co-electrolysis. Finally, different reaction modes of the CO_2/H_2O coelectrolysis in SOECs are summarized to offer new strategies to enhance the CO_2 conversion. Otherwise,developing SOECs operating at 300-600 °C can integrate the electrochemical reduction and the Fischer-Tropsch reaction to convert the CO_2/H_2O into more valuable chemicals, which will be a new research direction in the future.     

Highly-active,metal-free,carbon-based ORR cathode for efficient organics removal and electricity generation in a PFC system

A highly-active,metal-free,carbon-based oxygen reduction reaction(ORR) cathode,i.e.,graphitized Ndoped carbon felt(GNCF),was prepared,for the first time,by in-situ modifying the doping species of polyacrylonitrile(PAN)-based carbon felt(CF) via a facile annealing process in Ar atmosphere.It was applied for dramatically enhanced organics degradation and electricity generation in a photocatalytic fuel cell(PFC) system.The GNCF showed enhanced specific surface area,improved graphitization and raised ratio of graphitic N,therefore resulting in excellently improved ORR performance compared to the CF.When applying the GNCF as a cathode in a PFC system,the proposed PFC showed significant improvement in degrading various model organic contaminants and outputing electricity simultaneously when compared with the PFC with CF.For instance,the apparent rate constant and electricity output efficiency showed ～10.6 times and ～7.2 times,respectively,improvement when using rhodamine B as model waste.Further improved performance was also achieved by aeration of air or O_2 due to the fu rther enhanced ORR.The proposed PFC was also efficient in a wide pH,and kept outsta nding stability in long-term utilization.     

Comparative Study of Special Features of the Oxygen Reaction (Molecular Oxygen Ionization and Evolution) in Aqueous and Nonaqueous Electrolyte Solutions (a Review)

Studies of the oxygen reaction, including the oxygen ionization and evolution processes occurring at typical electrode materials in aqueous and nonaqueous electrolytes, are analyzed. A connection between the problematics of the oxygen electrode reaction in nonaqueous media and the developing of novel batteries, in the first place, Li–O₂ batteries, is emphasized. Unlike aqueous solutions, the oxygen reduction in aprotic electrolytes was shown to occur without breaking of the O–O bond; it is accompanied by formation of poorly soluble product of two-electron reaction (Li₂O₂) in the pores of positive electrode. The effect of the solvent donor number and the anion composition on the oxygen reduction mechanism and the lithium peroxide deposit structure is described. A marked reduction of the Li₂O₂ oxidation overvoltage when passing from carbonaceous materials to platinum-containing catalysts in the positive electrode is elucidated; in the latter case, the effect of electrocatalyst type upon the Li₂O₂ formation reaction is somewhat reduced. The elucidation of the contribution of processes occurring at the free and lithium-peroxide-covered electrode surface during the oxygen reaction for wide variety of active materials is formulated as the main basic problem of the future research.     

Photo‐excited Oxygen Reduction and Oxygen Evolution Reactions Enable a High‐Performance Zn–Air Battery

The storage of solar energy in battery systems is pivotal for a sustainable society, which faces many challenges. Herein, a Zn–air battery is constructed with two cathodes of poly(1,4‐di(2‐thienyl))benzene (PDTB) and TiO₂ grown on carbon papers to sandwich a Zn anode. The PDTB cathode is illuminated in a discharging process, in which photoelectrons are excited into the conduction band of PDTB to promote oxygen reduction reaction (ORR) and raise the output voltage. In a reverse process, holes in the valence band of the illuminated TiO₂ cathode are driven for the oxygen evolution reaction (OER) by an applied voltage. A record‐high discharge voltage of 1.90 V and an unprecedented low charge voltage of 0.59 V are achieved in the photo‐involved Zn–air battery, regardless of the equilibrium voltage. This work offers an innovative pathway for photo‐energy utilization in rechargeable batteries.     

Electrochemical jet-cell for the in-situ generation of hydrogen peroxide

In this work, a proof of concept of a novel reactor design for the in-situ electrochemical production of H₂O₂ from oxygen reduction reaction is presented for the first time. The innovative design incorporates a venturi-based jet aerator to supply atmospheric oxygen without additional energy consumption to a 3D flow-through modified carbon felt (CF) cathode. Preliminary experiments confirmed that electro-generation of hydrogen peroxide is possible in a system as the one proposed. Comparison with a flow-by cell with a gas diffusion cathode under similar conditions revealed that current efficiency towards hydrogen peroxide accumulation is even higher (72 vs 65% at 1 h) than in the case of the conventional system. Jet aerator stands as a promising oxygen supply thanks to its excellent performance and both low investment cost and energy consumption. Considering all the above, the electrochemical jet cell stands as a rather promising design for the efficient hydrogen peroxide electro-generation.     

First principles calculations of oxygen reduction reaction at fuel cell cathodes

The efficiency of solid oxide fuel cells (SOFC) depends critically on materials, in particular for the cathode where the oxygen reduction reaction (ORR) occurs. Typically, mixed conducting perovskite ABO₃-type materials are used for this purpose. The dominating surface terminations are (001) AO and BO₂, with the relative fractions depending on materials composition and ambient conditions.Here, results of recent large-scale first principles (ab initio) calculations for the two alternative polar (La,Sr)O and MnO₂ (001) terminations of (La,Sr)MnO₃ cathode materials are discussed. The surface oxygen vacancy concentration for the (La,Sr)O termination is more than 5 orders of magnitude smaller compared to MnO₂, which leads to drastically decreased estimated ORR rates. Thus, it is predicted for prototypical SOFC cathode materials that the BO₂ termination largely determines the ORR kinetics, although with Sr surface segregation (long-term degradation) its fraction of the total surface area decreases, which slows down cathode kinetics.     

Carbon/titanium oxide supported bimetallic platinum/iridium nanocomposites as bifunctional electrocatalysts for lithium-air batteries

Platinum (Pt) and iridium (Ir) catalysts are well known to strongly enhance the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) kinetics, respectively. Pt–Ir-based bimetallic compounds along with carbon-supported titanium oxides (C–TiO₂) have been synthesized for the application as electrocatalysts in lithium oxygen batteries. Transition metal oxide-based bimetallic nanocomposites (Pt–Ir/C–TiO₂) were prepared by an incipient wetness impregnation technique. The as-prepared electrocatalysts were composed of a well-dispersed homogenous alloy of nanoparticles as confirmed by X-ray diffraction patterns and Fourier transform scanning electron microscopy analyses. The electrochemical characterizations reveal that the Pt–Ir/C–TiO₂ electrocatalysts were bifunctional with high activity for both ORR and OER. When applied as an air cathode catalyst in lithium-air batteries, the electrocatalyst improved the battery performance in terms of capacity, reversibility, and cycle life compared to that of cathodes without any catalysts.