Deoxygenation of some α-dicarbonyl compounds by tris(diethylamino)phosphine in the presence of fullerene C60

The reactions of such cyclic α-diketones as acenaphthenequinone, aceanthrenequinone, and N-alkylisatins, with hexaethyltriaminophosphine in the presence of the fullerene C(60), lead to the formation of methanofullerene derivatives under mild conditions. This process proceeds via deoxygenation of the dicarbonyl compound by the P(III) derivative and is likely to involve the intermediate formation of α-ketocarbenes. The structure of some methanofullerenes has been confirmed by NMR and XRD. The electrochemical behavior of the methanofullerenes was also investigated.     

Characterization of thermal decomposition behavior of commercial flame-retardant ethylene–propylene–diene monomer (EPDM) rubber

Journal of Thermal Analysis and Calorimetry - The thermal decomposition behavior of the commercial flame-retardant ethylene–propylene–diene monomer (EPDM) rubber was studied employing...     

Trifluoroacetic Acid–Catalyzed Synthesis of N-(1-(3-Chlorophenyl)-3-aryl-3-oxopropyl)-2-(4-nitrophenyl)acetamides via Dakin–West Reaction

A series of novel N-(1-(3-chlorophenyl)-3-aryl-3-oxopropyl)-2-(4-nitrophenyl) acetamides were synthesized using p-nitrophenylacetonitrile, m-chlorobenzaldehyde, and aryl methyl ketones as starting materials and trifluoroacetic acid (TFA) as catalyst. This realized an improved Dakin–West reaction in which p-nitrophenylacetonitrile was involved. The chemical structures of up to 15 target molecules were characterized by ¹H NMR, ¹³C NMR, and high-resolution mass spectrometry. This method provides a facile synthetic protocol under more moderate reaction conditions, smaller dosage (0.40 mol%) and hence lower cost of catalyst, and simpler posttreatment in comparison to other known methods. A reaction mechanism is proposed in which hydroxyacetophenone is first catalytically converted into the corresponding acetoxyacetophenone prior to be involved in the subsequent Dakin–West reaction that eventually leads to hydroxyl-acetylated target compounds.

[Supplementary materials are available for this article. Go to the publisher's online edition of Synthetic Communications® for the following free supplemental resource(s): Full experimental and spectral details.]     

Enhanced photoelectrocatalytic performance of nanoporous WO3 photoanode by modification of cobalt–phosphate (Co–Pi) catalyst

Nanoporous WO₃ photoanode modified with cobalt–phosphate (Co–Pi) catalyst was synthesized in this study. The nanoporous WO₃ was prepared by anodization of W foil following a photo-assisted electrodeposition of Co–Pi catalyst. The presence of Co–Pi catalyst obviously facilitated the charge transfer and reduced the recombination of photoexcited electron/hole by forming an adequate junction between the catalyst and the nanoporous WO₃. The photocurrent density of nanoporous WO₃/Co–Pi was found to be 1.4 mA/cm² at 0.8 V which was 20 % higher than nanoporous WO₃, and the nanoporous WO₃/Co–Pi photoanode is also more stable for long-term application.     

Effect of the salting-out agent anion nature on the phase separation of a potassium salt–potassium bis(alkyl polyoxyethylene)phosphate–water systems

The effect the salting-out agent anion nature has on the temperature and concentration intervals of the existence of the separation area is established by analyzing the phase diagrams of pseudoternary KCl (KBr, KI, KNO₃, K₂SO₄, K₄P₂O₇)–potassium bis(alkyl polyoxyethylene)phosphate (oxyphos B)–water systems. It is concluded that the anionic salting-out capability is reduced in the order P₂O₇^4-> SO₄^2-> Cl^? > Br^?> NO₇^4-> SO₃^-> I^?. The thermodynamic parameters of phase separation used to interpret the results are calculated. The observed pattern of a change in the salting-out ability of the investigated salts relative to aqueous solutions of the surfactants is in good agreement with the lyotropic (Hofmeister) series.     

Tris(tert-butyl)phosphine selenide,the missing link in tris(tert-butyl)­phosphine chalcogenide structures tBu3P=X (X = O,S, Se,Te)

In tris(tert-butyl)­phosphine selenide, C₁₂H₂₇PSe, all the methyl ligands are disordered over two sites in the ratio 70/30. The mol­ecule displays crystallographic C₃ symmetry. The bond angles at the P atom are distorted tetrahedral [C—P—C 110.02 (5)° and Se=P—C 108.91 (5)°]. The P—C and P=Se bond lengths are 1.908 (1) and 2.1326 (6) Å, respectively. A comparison of the structural data of the complete series of tris(tert-butyl)­phosphine chalcogenides (^tBu₃PO, ^tBu₃PS, ^tBu₃PSe and ^tBu₃PTe) with the corresponding data of other phosphine chalcogenides substituted by smaller organic groups shows the great influence of the bulky tert-butyl ligands.     

Synthesis of 3-[tris(ψ-trifluoropropyl)sily]propyldimethylsilane

Monofunctional silane containing a tris(ψ-trifluoropropyl) fragment was synthesized in high yield by a series of successive reactions including the Grignard reaction, hydrosilylation, and reduction. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 4, pp. 808–809, April, 1999.     

Electrochemical studies of the bis (triphenyl phosphine) ruthenium(II) complex,cis -[RuCl2(L)(PPh3)2], with L = 2-(2′-pyridyl)quinoxaline

Electrochemical studies of the newly synthesized bis(triphenyl phosphine) ruthenium(II) complex, cis-[RuCl₂(L)(PPh₃)₂] (1, with L = 2-(2′-pyridyl)quinoxaline, C₁₃N₃H₉), were performed in acetonitrile (ACN). For this purpose, cyclic voltammograms (CVs) as well as electrochemical impedance spectra (EIS) were recorded on either glassy carbon (GC), platinum (Pt), gold (Au), or multi-walled carbon nanotube (MWCNT) electrodes. Qualitative examination of solutions of 1 in ACN was performed on the basis of conductivity measurements and electrospray ionization mass spectrometry (ESI–MS). The conductivity data suggest that 1 is a 1 : 1 type electrolyte in ACN. The ESI spectra further demonstrate that upon dissolution of 1 in ACN progressive replacement of chloro- and PPh₃-ligands by ACN occurs, leading to formation of [RuCl(L)(PPh₃)(CH₃CN)₂]⁺Cl^?, [2 ⁺ Cl ^? ]. The CVs recorded for [2 ⁺ Cl ^? ] on various working electrodes demonstrate that the reversibility of the redox couple 2^{2 +/+} enhances with the order: Au < Pt < MWCNT < GC. The EI spectra verify that GC and MWCNT electrodes provide insignificant barrier for interfacial electron transfer since they afford less charge-transfer resistance.     

Heterobimetallic complexes of palladium(II) bridged by the mixed phosphine–phosphine oxide ligand Ph2PCH2CH2P(O)Ph2

The mixed phosphine–phosphine oxide Ph₂PCH₂CH₂P(O)Ph₂ (dppeO) reacts with either trans-[PdCl₂(PhCN)₂], Na₂[PdCl₄] or trans-[PdCl₂(DMSO)₂] to give trans-[PdCl₂{¹-Ph₂PCH₂CH₂P(O)Ph₂}₂]. Treatment of the latter with the metal chlorides, MCl₂ · nH₂O (M = Mn, Cu, Co, Zn, Hg; n = 4, 2, 6, 1, 0, respectively) or with Me₂SnCl₂ or SnCl₄ · 5H₂O, or with UO₂(NO₃)₂ · 6H₂O or UO₂(OAc)₂ · 2H₂O gives heterobimetallic complexes: trans-[PdCl₂{-Ph₂PCH₂CH₂P(O)Ph₂}₂MX₂] · nH₂O. The cobalt complex (MX₂ = CoCl₂) was unstable in solution (MeOH or EtOH/CHCl₃), and reverts to trans-[PdCl₂{¹-Ph₂PCH₂CH₂P(O)Ph₂}₂] and CoCl₂. trans-[PdCl₂{¹-Ph₂PCH₂CH₂P(O)Ph₂}₂] does not apparently react with either NiCl₂ · 6H₂O or CdCl₂ · 2.5H₂O.     

Applications of Gas Chromatography–Mass Spectrometry (GC–MS): An Examination of Selected African Cases

As a result of the new economic order in Africa, scientists face enormous challenges due to an increase in socio and economic activities. Gas chromatography–mass spectrometry (GC–MS) will be expected to play a big role in providing some of the solutions to the challenges. Up to now, applications of GC–MS in Africa have focused on profiling natural products for their chemical composition as seen from the number of papers published between 2005 and 2011, i.e. at approximately 62 % of the total. In order to meet the new challenges, a paradigm shift is suggested in the design of research projects. Some economic activities envisaged to boom are food and beverage production for local consumption and for export to markets in the developed world. To meet the requirements of these markets, monitoring pesticides and metabolites of veterinary drugs and other toxins in food will become paramount. Africa also needs to put stringent environmental monitoring policies in place. This will aid remediation following accidental or intentional spillages of chemicals not benign to the environment.

     

Ditertiary phosphine derivatives of the heteronuclear cluster RuOs3(μ-H)2(CO)13

The heteronuclear cluster RuOs₃(μ-H)₂(CO)₁₃ (1) reacted readily with a number of ditertiary phosphines under chemical activation with trimethylamine-N-oxide. The solid-state and solution structures of these derivatives have been examined. Six structural types have been characterized crystallographically, including one in which a phenyl group migrates from the ditertiary phosphine ligand to the metal framework. There are many more isomers present in solution, most of which are rapidly inter-converting via hydride migrations.     

Synthesis,crystal structure and spectroscopic characterization of new neutral and cationic (η-p-cymene)–ruthenium(II) complexes with phosphine–amide ligands

The dimeric starting material [Ru(η⁶-p-cymene)(μ-Cl)Cl]₂ reacts with the phosphino-amides o-Ph₂P–C₆H₄CO–NH–R [R = ⁱPr (a), Ph (b), 4-MeC₆H₄ (c), 4-FC₆H₄ (d)] to give the mononuclear compounds 1a–d [RuCl(η⁶-p-cymene)(o-Ph₂P–C₆H₄–CO–NH–R)]Cl. The subsequent reaction of these complexes with KPF₆ produced the cationic species 2a–d [RuCl(η⁶-p-cymene)(o-Ph₂P–C₆H₄–CO–NH–R)][PF₆] in which phosphino-amides also act as rigid P,O-chelating ligands. The molecular structures of 2b–d were determined crystallographically. Amide deprotonation is achieved when complexes 2a–d were made react with 1 M aqueous solution of KOH, affording the corresponding neutral species 3a–d [RuCl(η⁶-p-cymene)(o-Ph₂P–C₆H₄–CO–N–R)] in which a P,N-coordination mode is suggested.     

Thermodynamics of the hydrolysis reactions of adenosine 3′,5′-(cyclic)phosphate(aq) and phosphoenolpyruvate(aq); the standard molar formation properties of 3′,5′-(cyclic)phosphate(aq) and phosphoenolpyruvate(aq)

Molar calorimetric enthalpy changes Δ_rH_m(cal) have been measured for the biochemical reactions {cAMP(aq) + H₂O(l)=AMP(aq)} and {PEP(aq) + H₂O(l)=pyruvate(aq) + phosphate(aq)}. The reactions were catalyzed, respectively, by phosphodiesterase 3^′,5^′-cyclic nucleotide and by alkaline phosphatase. The results were analyzed by using a chemical equilibrium model to obtain values of standard molar enthalpies of reaction Δ_rH_m^∘ for the respective reference reactions {cAMP⁻(aq) + H₂O(l)=HAMP⁻(aq)} and {PEP³⁻(aq) + H₂O(l)=pyruvate⁻(aq) + HPO²⁻₄(aq)}. Literature values of the apparent equilibrium constants K^′ for the reactions {ATP(aq)=cAMP(aq) + pyrophosphate(aq)}, {ATP(aq) + pyruvate(aq)=ADP(aq) + PEP(aq)}, and {ATP(aq) + pyruvate(aq) + phosphate(aq)=AMP(aq) + PEP(aq) + pyrophosphate(aq)} were also analyzed by using the chemical equilibrium model. These calculations yielded values of the equilibrium constants K and standard molar Gibbs free energy changes Δ_rG_m^∘ for ionic reference reactions that correspond to the overall biochemical reactions. Combination of the standard molar reaction property values (K, Δ_rH_m^∘, and Δ_rG_m^∘) with the standard molar formation properties of the AMP, ADP, ATP, pyrophosphate, and pyruvate species led to values of the standard molar enthalpy Δ_fH_m^∘ and Gibbs free energy of formation Δ_fG_m^∘ and the standard partial molar entropy S_m^∘ of the cAMP and PEP species. The thermochemical network appears to be reasonably well reinforced and thus lends some confidence to the accuracy of the calculated property values of the variety of species involved in the several reactions considered herein.     

Formation of the phase structure of polymer systems of ethylene copolymers–[3-(2-aminoethylamino)propyl]trimethoxysilane

Solubility of components is investigated in a wide range of temperatures and formulations in systems of ethylene copolymers–[3-(2-aminoethylamino)propyl]trimethoxysilane. Phase diagrams are constructed. Temperature and concentration ranges of variation of solubility are revealed, and the structure of modified copolymers is studied.     

Unexpected reduction of the nitro group in (3-nitrophenyl)-1,2,4-triazines during their aza-Diels–Alder reaction with 1-morpholinocyclopentene

Unexpected reduction of the nitro group to the amino one during aza-Diels–Alder reaction between (3-nitrophenyl)-1,2,4-triazines and 1-morpholinocyclopentene (neat, 200 °C, argon) occurred to furnish 4-(3-aminophenyl)-6,7-dihydro-5H-cyclopenta[c]pyridines.