双氧水氧化环己烯催化合成己二酸研究进展

评述了近年来以环己烯为底物,双氧水为氧源,分别采用钨酸盐、钨酸、杂多酸及杂多酸盐、功能化分子筛和负载离子液体等为催化剂催化合成己二酸的研究进展.     

Determination of traces of fluorine or sulfur by x-ray analysis

New X-ray methods have been developed for the determination of as little as 1 μg of fluorine or as little as 0.1 μg of sulfur. Fluorine as fluoride is precipitated as lanthanum fluoride in 75% ethanol-water mixture and determined by measuring the amount of lanthanum present in the precipitate. Sulfur as sulfate is precipitated as barium sulfate from a barium sulfate saturated 50% ethanol-buffer mixture, using selenate as a coprecipitant, and determined by measuring the amount of sulfur present. Sulfur as sulfide is precipitated as cadmium sulfide and determined by measuring the amount of sulfur or cadmium in the precipitate.     

Determination of Thermodynamic Parameters from Evaporation of Binary Microdroplets of Volatile Constituents

An experimental technique based on a modified vibrating orifice aerosol generator has been employed to study unsteady evaporation of linear streams of highly monodisperse binary microdroplets of volatile constituents over short time periods (i.e., <1 ms), such that the droplet composition remains nearly constant. The droplet size and temperature (i.e., refractive index) have been determined with high temporal resolution from the resonances observed in the simultaneous elastic and Raman light scattering spectra obtained by varying the droplet size through modulation of droplet generation frequency. By using this technique we show that thermodynamic parameters of binary systems, such as activity coefficients as well as vapor pressures of the constituents as functions of temperature, can be determined. We have applied the procedure to study unsteady evaporation rates of pure ethanol and methanol droplets as well as binary droplets containing various ratios of ethanol and methanol. We have obtained vapor pressures of ethanol and methanol as functions of temperature as well as activity coefficients of ethanol and methanol as functions of composition, and the results show excellent agreements with the values reported in the literature. The technique presented in this paper is applicable to any binary system containing at least one volatile constituent. Copyright 2000 Academic Press.     

酸促进的氨基甲酸酯醇解合成碳酸酯

在较低温度和压力下,以氯化氢为共反应物或沸石分子筛为催化剂,由氨基甲酸酯与醇反应合成多种碳酸酯。氯化铵沉淀的生成或沸石分子筛对氨气的吸附,可推动反应平衡,使碳酸酯的生成达到较高收率。以氯化氢为共反应物时,反应温度为60℃,最高产率达58％;而以沸石分子筛为催化剂,反应温度为140℃时,最高产率是19％。     

聚吡咯的合成与新型双离子电池性能研究

用反相微乳聚合法制备了十二苯磺酸(DBSA)掺杂的导电聚吡咯纳米材料, DBSA既作为表面活性剂又作为掺杂剂, 能够提高聚吡咯的导电性. 用制备出的DBSA-PPy 为正极材料, 石墨为负极材料组装双离子电池, 测试结果表明, C/DBSA-PPy 电池的电化学性能已达到传统锂离子电池的水平, 这是因其具有较高的导电性和特殊掺杂结构的聚吡咯使其电化学性能得到优化.     

咪草烟分子印迹聚合物的制备及其选择性吸附性能的研究

以丙烯酸为聚合单体,TMPTA为交联剂,AIBN为引发剂,咪草烟为模板分子,采用在低温光聚合的方法,制备了对咪草烟分子具有选择性识别能力的分子印迹聚合物．通过IR和HPLC表征,咪草烟分子印迹聚合物对咪草烟分子具有良好的识别作用．     

Effect of shear rate on the rate of radical polymerization of methyl methacrylate

The effect of shear rate on the radical polymerization of methyl methacrylate at 50°, in bulk as well as in solution, has been studied. The rate of polymerization increases by as much as 15% at high shear rates. This increase is explained in terms of changes in the initiator efficiency with shear rate.     

Reaction of thiocyanates with ironcyanogen compounds of silver

Silver fenocyanide as well as Silver ferricyanide are converted into silver thiocyanate by treating with thiocyanate ions, while feirocyanide ions or ferricyanide ions are formed at the same time. Silver ferrocyanide as well as silver ferricyanide are dissolved by solutions of thiocynates of higher concentrations.     

不同光敏剂对光敏热成像材料感光性能的影响

本文考察了不同制备方法、不同种类的光敏剂对以苯并三氮唑银为银源的光敏热成像材料感光性能的影响。结果显示原位法中以AgI和AgBrI为光敏剂的PTG材料具有较高的感光度,分别为以AgBr为光敏剂的参比样片感光度的16倍和2.4倍;异位法制备的PTG材料中,以AgBrI乳剂为光敏剂的感光度比以AgBr为光敏剂的感光度高,是其3倍;此外,同是以AgBr为光敏剂、用异位法制备的PTG材料的感光度比原位法制备的PTG材料感光度高。文中初步分析讨论了出现以上实验结果的原因。     

Further analysis of delayed luminescence of plants

The delayed luminescence curves of biological tissues, in particular the "hyperbolic" oscillations of the form exp(-iln (1 + lambda t)) with t as the time and lambda as a constant, were subjects of further experimental and theoretical investigations. It turned out that the oscillations are solutions of a Hamiltonian that keeps coherent states coherent. In agreement to the expectations the oscillations disappear as soon as the biological system looses its integrity or its collective structure. The photocount statistics (PCS) confirms these results. The illumination itself influences the biological state under consideration. The temperature dependence displays small deviations from the Arrhenius-law with a mean activation energy of about 0.5 eV in case of plants. The results may be useful for investigating supermolecular interactions as well as for assessing the quality or quality changes of biological tissues.     

水溶性聚丙烯酸类卷材涂料前驱成膜物的制备

以丙烯酸、丙烯酸丁酯和甲基丙烯酸甲酯为单体,采用自由基聚合法制备了聚丙烯酸卷材涂料前驱成膜物,获得了适宜的制备工艺条件。研究表明,以三元共聚体系聚合产物为根本,以氨基树脂为交联剂,三乙胺为中和剂,可制备令人满意的水溶性聚丙烯酸卷材涂料前驱成膜物,为开发水溶性聚丙烯酸卷材涂料提供了基础数据。     

Peculiarities of the Porous Structure of Aluminosilicate Mesoporous Substances Obtained in The Presence of Biotemplates

Supramolecular structures of lecithin occurred to be the template in the synthesis of mesoporous aluminosilicates; using of various combinations of lecithin and cetyltrimethyl-ammonium bromide or octadecylamine as templating agents allowed to obtain mesoporous substances with pores up to 100 Å, as well as biporous materials in aluminosilicate system. In the presence of glucose oxidase and cetyltrimethyl-ammonium bromide combinations aluminosilicate substances with complex porous structure were shown to be formed (pore size distributions exhibited 3 peaks, corresponding 3 effective size of mesopores in the 30–100 Å range). The investigation of sorption of glucose oxidase on obtained aluminosilicate mesoporous substances was carried out, the results obtained allowus to consider such materials as prospect for creation high capable and selective sorbents for biomolecules sorption, as well as active elements of chemical and biosensors.     

Construction of hydrolytically-degradable thin films via layer-by-layer deposition of degradable polyelectrolytes

Hydrolytically degradable, multilayered films ranging from 10 to 100 nm have been constructed by the layer-by-layer deposition of degradable polycations and oppositely charged polyanions. Polycations play dual roles in these systems, serving as structural components of the film as well as transient elements designed to trigger release; polyanions serve as structural components and as entities to be released or delivered. The films erode in a controlled manner under physiological conditions and are suitable for the incorporation and subsequent controlled release of functional polyanions such as DNA.     

Effects of nanoconfinement on the morphology and reactivity of organic materials

When organic materials are placed in environments which physically confine the materials at the nanometre scale, interfacial effects and confinement-induced loss of entropy can significantly alter materials' properties such as the glass transition temperature as well as the nanoscale morphology as compared to a "free" system. In block copolymers, nanoconfinement leads to a range of unusual self-organized nanoscale morphologies. In this article, attempts to induce nanoconfinement effects in new polymer systems as well as at interfaces will be highlighted and some possible future implications for organic synthesis and biology will be discussed.     

Extraordinary atomic mobility of Au{111} at 80 Kelvin: effect of styrene adsorption

We describe how the presence of styrene, a weakly adsorbed molecule, dramatically restructures the Au{111} surface at temperatures as low as 80 K. The restructuring manifests itself both in mobility of step-edge atoms, as well as changes in the position of the herringbone reconstruction over time. These effects are explained in terms of the preferential adsorption sites of styrene allowing it to assist in atom detachment from step edges, as well as lowering of the energetic barrier for movement of the herringbone reconstruction. This work has important consequences for studies in which Au is used as a support for or as an electrical contact to molecules.     

Aspects of Electrochemical Behavior of Aldehydes and Ketones in Protic Media

Reduction of carbonyl group in aldehydes and ketones, as well as oxidation of numerous aldehydes is discussed, as well as those reductions of organic compounds where the C?O group activates cleavage of an adjacent C? X bond where X is a good leaving group like halogen, OH, NH₂ or SR or activates hydrogenation of an adjacent C?C group. Survey involves aliphatic and aromatic aldehydes, aryl alkyl and diaryl ketones, as well as α‐ketoacids, 1,2‐diketones and compounds where the carbonyl group is a part of a ring. The role of acid–base, hydration–dehydration and in some cases keto–enol equilibria on electrochemical behavior is pointed out, as well as the role of buffer kind and concentration and the nature of the cation of supporting electrolyte. Better understanding of these factors promises finding of best conditions for electroanalytical procedures.     

Effect of different capping agents on physicochemical and antimicrobial properties of ZnO nanoparticles

This research aims to investigate the influence of soluble starch; lactose; carboxymethyl cellulose; urea; and polyvinylpyrrolidone on synthesis of zinc oxide nanoparticles (ZnO-NPs). Zinc acetate was used as a precursor under alkaline conditions to produce ZnO-NPs as a low-cost and efficient antimicrobial and UV-blocking agent. Characterization and antimicrobial functional properties of prepared nanoparticles were investigated and reported using FTIR, TGA, XRD, TEM, analysis, as well as antimicrobial assay, respectively. The results revealed that the thermal decomposition profile, size of ZnO-NPs, IR spectra, as well as antimicrobial activity of the prepared ZnO-NPs is governed by the type of capping agents. Crystallinity analysis showed identical patterns in peak intensities and width irrespective of the used capping agents. On the other hand, the obtained results disclosed that using soluble starch as a capping agent results in attaining lower particle size of 3–5 nm and higher antimicrobial efficacy as compared with the other capping agents.     

Catalytic enantioselective Strecker reaction of ketoimines using catalytic amount of TMSCN and stoichiometric amount of HCN

Catalyst loading as low as 0.1 mol % was achieved in the enantioselective Strecker reaction of ketoimines. Excellent enantioselectivity was obtained with a combined use of a catalytic amount of TMSCN and a stoichiometric amount of HCN as a reagent, and a chiral gadolinium complex as a catalyst.     

Modeling of equilibriums of formation of polynuclear chelates of nickel(ii) with histidine

Electronic absorption spectroscopy has been applied to study of protolytic and complex formation equilibriums in binary and tertiary systems containing nickel(II) salt, ethylenediaminetetraacetic acid and 2-amino-3-(imidazol-2-yl)propionic acid (ionic strength 0.1 mol/L aqueous NaClO₄, 20±2°C). Fitting of experimental spectral properties as function of pH and the components concentration requires dissociation constants of the ligands as well as stability constants of homoligand, heteroligand, and polynuclear complexes as parameters. These parameters have been estimated from the best fit model, and possible complexes structures have been suggested.