Cationic Ti(IV) and neutral Ti(III) titanocene-phosphinoaryloxide frustrated Lewis pairs: hydrogen activation and catalytic amine-borane dehydrogenation

Titanium-phosphorus frustrated Lewis pairs (FLPs) based on titanocene-phosphinoaryloxide complexes have been synthesised. The cationic titanium(IV) complex [Cp(2)TiOC(6)H(4)P((t)Bu)(2)][B(C(6)F(5))(4)] 2 reacts with hydrogen to yield the reduced titanium(III) complex [Cp(2)TiOC(6)H(4)PH((t)Bu)(2)][B(C(6)F(5))(4)] 5. The titanium(III)-phosphorus FLP [Cp(2)TiOC(6)H(4)P((t)Bu)(2)] 6 has been synthesised either by chemical reduction of [Cp(2)Ti(Cl)OC(6)H(4)P((t)Bu)(2)] 1 with [CoCp*(2)] or by reaction of [Cp(2)Ti{N(SiMe(3))(2)}] with 2-C(6)H(4)(OH){P((t)Bu)(2)}. Both 2 and 6 catalyse the dehydrogenation of Me(2)HN·BH(3).     

Synthesis, structures, and reactivity of weakly coordinating anions with delocalized borate structure: the assessment of anion effects in metallocene polymerization catalysts.

The formation of adducts of tris(pentafluorophenyl)borane with strongly coordinating anions such as CN(-) and [M(CN)(4)](2)(-) (M = Ni, Pd) is a synthetically facile route to the bulky, very weakly coordinating anions [CN[B(C(6)F(5))(3)](2)](-) and [M[CNB(C(6)F(5))(3)](4)](2-) which are isolated as stable NHMe(2)Ph(+) and CPh(3)(+) salts. The crystal structures of [CPh(3)][CN[B(C(6)F(5))(3)](2)] (1), [CPh(3)][ClB(C(6)F(5))(3)] (2), [NHMe(2)Ph](2)[Ni[CNB(C(6)F(5))(3)](4)].2Me(2)CO (4b.2Me(2)CO), [CPh(3)](2)[Ni[CNB(C(6)F(5))(3)](4)].2CH(2)Cl(2) (4c.2CH(2)Cl(2)), and [CPh(3)](2)[Pd[CNB(C(6)F(5))(3)](4)].2CH(2)Cl(2) (5c.2CH(2)Cl(2)) are reported. The CN stretching frequencies in 4 and 5 are shifted by approximately 110 cm(-1) to higher wavenumbers compared to the parent tetracyano complexes in aqueous solution, although the M-C and C-N distances show no significant change on B(C(6)F(5))(3) coordination. Zirconocene dimethyl complexes L(2)ZrMe(2) [L(2) = Cp(2), SBI = rac-Me(2)Si(Ind)(2)] react with 1, 4c or 5c in benzene solution at 20 degrees C to give the salts of binuclear methyl-bridged cations, [(L(2)ZrMe)(2)(mu-Me)][CN[B(C(6)F(5))(3)](2)] and [(L(2)ZrMe)(2)(mu-Me)](2)[M[CNB(C(6)F(5))(3)](4)]. The reactivity of these species in solution was studied in comparison with the known [[(SBI)ZrMe](2)(mu-Me)][B(C(6)F(5))(4)]. While the latter reacts with excess [CPh(3)][B(C(6)F(5))(4)] in benzene to give the mononuclear ion pair [(SBI)ZrMe(+).B(C(6)F(5))(4)(-)] in a pseudo-first-order reaction, k = 3 x 10(-4) s(-1), [(L(2)ZrMe)(2)(mu-Me)][CN[B(C(6)F(5))(3)](2)] reacts to give a mixture of L(2)ZrMe(mu-Me)B(C(6)F(5))(3) and L(2)ZrMe(mu-NC)B(C(6)F(5))(3). Recrystallization of [Cp' '(2)Zr(mu-Me)(2)AlMe(2)][CN[B(C(6)F(5))(3)](2)] affords Cp' '(2)ZrMe(mu-NC)B(C(6)F(5))(3) 6, the X-ray structure of which is reported. The stability of [(L(2)ZrMe)(2)(mu-Me)](+)X(-) decreases in the order X = [B(C(6)F(5))(4)] > [M[CNB(C(6)F(5))(3)](4)] > [CN[B(C(6)F(5))(3)](2)] and increases strongly with the steric bulk of L(2) = Cp(2) < SBI. Activation of (SBI)ZrMe(2) by 1 in the presence of AlBu(i)(3) gives extremely active ethene polymerization catalysts. Polymerization studies at 1-7 bar monomer pressure suggest that these, and by implication most other highly active ethene polymerization catalysts, are strongly mass-transport limited. By contrast, monitoring propene polymerization activities with the systems (SBI)ZrMe(2)/1/AlBu(i)(3) and CGCTiMe(2)/1/AlBu(i)(3) at 20 degrees C as a function of catalyst concentration demonstrates that in these cases mass-transport limitation is absent up to [metal] approximately 2 x 10(-5) mol L(-1). Propene polymerization activities decrease in the order [CN[B(C(6)F(5))(3)](2)](-) > [B(C(6)F(5))(4)](-) > [M[CNB(C(6)F(5))(3)](4)](2-) > [MeB(C(6)F(5))(3)](-), with differences in activation barriers relative to [CN[B(C(6)F(5))(3)](2)](-) of DeltaDeltaG = 1.1 (B(C(6)F(5))(4)(-)), 4.1 (Ni[CNB(C(6)F(5))(3)](4)(2-)) and 10.7-12.8 kJ mol(-)(1) (MeB(C(6)F(5))(3)(-)). The data suggest that even in the case of very bulky anions with delocalized negative charge the displacement of the anion by the monomer must be involved in the rate-limiting step.     

Synthesis and structure of amido- and imido(pentafluorophenyl)borane zirconocene and hafnocene complexes: N-H and B-H activation

Treatment of Me(2)S·B(C(6)F(5))(n) H(3-n) (n=1 or 2) with ammonia yields the corresponding adducts. H(3)N·B(C(6)F(5))H(2) dimerises in the solid state through N-H···H-B dihydrogen interactions. The adducts can be deprotonated to give lithium amidoboranes Li[NH(2)B(C(6)F(5))(n)H(3-n)]. Reaction of the n=2 reagent with [Cp(2)ZrCl(2)] leads to disubstitution, but [Cp(2)Zr{NH(2)B(C(6)F(5))(2)H}(2)] is in equilibrium with the product of β-hydride elimination [Cp(2)Zr(H){NH(2)B(C(6)F(5))(2)H}], which proves to be the major isolated solid. The analogous reaction with [Cp(2)HfCl(2)] gives a mixture of [Cp(2)Hf{NH(2)B(C(6)F(5))(2)H}(2)] and the N-H activation product [Cp(2)Hf{NHB(C(6)F(5 )(2)H}]. [Cp(2)Zr{NH(2)B(C(6)F(5))(2)H}(2)]·PhMe and [Cp(2)Hf{NH(2)B(C(6)F(5))(2)H}(2)]·4(thf) exhibit β-B-agostic chelate bonding of one of the two amidoborane ligands in the solid state. The agostic hydride is invariably coordinated to the outside of the metallocene wedge. Exceptionally, [Cp(2)Hf{NH(2)B(C(6)F(5))(2)H}(2)]?PhMe has a structure in which the two amidoborane ligands adopt an intermediate coordination mode, in which neither is definitively agostic. [Cp(2)Hf{NHB(C(6)F(5))(2)H}] has a formally dianionic imidoborane ligand chelating through an agostic interaction, but the bond-length distribution suggests a contribution from a zwitterionic amidoborane resonance structure. Treatment of the zwitterions [Cp(2)MMe(μ-Me)B(C(6)F(5))(3)] (M=Zr, Hf) with Li[NH(2)B(C(6)F(5))(n)H(3-n)] (n=2) results in [Cp(2) MMe{NH(2)B(C(6)F(5))(2)H}] complexes, for which the spectroscopic data, particularly (1)J(B,H), again suggest β-B-agostic interactions. The reactions proceed similarly for the structurally encumbered [Cp'(2)ZrMe(μ-Me)B(C(6)F(5))(3)] precursor (Cp'=1,3-C(5)H(3)(SiMe(3))(2) , n=1 or 2) to give [Cp'(2)ZrMe{NH(2)B(C(6)F(5))(n)H(3-n)}], both of which have been structurally characterised and show chelating, agostic amidoborane coordination. In contrast, the analogous hafnium chemistry leads to the recovery of [Cp'(2)HfMe(2)] and the formation of Li[HB(C(6)F(5))(3)] through hydride abstraction.     

Transition metal complexes of the chelating phosphine borane ligand Ph2PCH2Ph2P.BH3

Chromium and ruthenium complexes of the chelating phosphine borane H(3)B.dppm are reported. Addition of H(3)B.dppm to [Cr(CO)(4)(nbd)](nbd = norbornadiene) affords [Cr(CO)(4)(eta1-H(3)B.dppm)] in which the borane is linked to the metal through a single B-H-Cr interaction. Addition of H(3)B.dppm to [CpRu(PR(3))(NCMe)(2)](+)(Cp =eta5)-C(5)H(5)) results in [CpRu(PR(3))(eta1-H(3)B.dppm)][PF(6)](R = Me, OMe) which also show a single B-H-Ru interaction. Reaction with [CpRu(NCMe)(3)](+) only resulted in a mixture of products. In contrast, with [Cp*Ru(NCMe)(3)](+)(Cp*=eta5)-C(5)Me(5)) a single product is isolated in high yield: [Cp*Ru(eta2-H(3)B.dppm)][PF(6)]. This complex shows two B-H-Ru interactions. Reaction with L = PMe(3) or CO breaks one of these and the complexes [Cp*Ru(L)(eta1-H(3)B.dppm)][PF(6)] are formed in good yield. With L = MeCN an equilibrium is established between [Cp*Ru(eta2-H(3)B.dppm)][PF(6)] and the acetonitrile adduct. [Cp*Ru (eta2-H(3)B.dppm)][PF(6)] can be considered as being "operationally unsaturated", effectively acting as a source of 16-electron [Cp*Ru (eta1-H(3)B.dppm)][PF(6)]. All the new compounds (apart from the CO and MeCN adducts) have been characterised by X-ray crystallography. The solid-state structure of H(3)B.dppm is also reported.     

Phosphonium-borate zwitterions, anionic phosphines, and dianionic phosphonium-dialkoxides via tetrahydrofuran ring-opening reactions

Sterically demanding secondary phosphines and phosphides react with (THF)B(C(6)F(5))(3) (THF = tetrahydrofuran) to give the THF ring-opened compounds [R(2)PHC(4)H(8)OB(C(6)F(5))(3)] and [Mes(2)PC(4)H(8)OB(C(6)F(5))(3)Li(THF)(2)] (Mes = C(6)H(2)Me-2,4,6). These reactions also occur consecutively to give the double THF ring-opened compounds [Mes(2)P(C(4)H(8)OB(C(6)F(5))(3))(2)][Li(THF)(4)] and [t-Bu(2)P(C(4)H(8)OB(C(6)F(5))(3))(2)Li].     

Activation of

Reversible C(6)F(5) transfer takes place between the boron centers in the anion formed by methide abstraction from [MeZr{N(SiMe(3))(2)}(3)] or [Cp(2)ZrMe(2)] (L(n)M-CH(3) in the reaction scheme) by the perfluorinated diborane 1. The solution chemistry of the metallocenium ion pairs formed from 1 and [Cp(2)ZrMe(2)] is correlated with the observed ethylene polymerization behavior of 1 in comparison to the monoborane B(C(6)F(5))(3), the related diborane 1,2-C(6)H(4)[B(C(6)F(5))(2)](2), and the 9,10-diboraanthracene compound 9,10-(C(6)F(5))(2)C(12)B(2)F(8).     

Naked (C5Me5)2M cations (M = Sc, Ti, and V) and their fluoroarene complexes

The ionic metallocene complexes [Cp*(2)M][BPh(4)] (Cp* = C(5)Me(5)) of the trivalent 3d metals Sc, Ti, and V were synthesized and structurally characterized. For M = Sc, the anion interacts weakly with the metal center through one of the phenyl groups, but for M = Ti and V, the cations are naked. They each contain one strongly distorted Cp* ligand, with one (V) or two (Ti) agostic C-H...M interactions involving the Cp*Me groups. For Sc and Ti, these Lewis acidic species react with fluorobenzene and 1,2-difluorobenzene to yield [Cp*(2)M(kappaF-FC(6)H(5))(n)][BPh(4)] (M = Sc, n = 2; M = Ti, n = 1) and [Cp*(2)M(kappa(2)F-1,2-F(2)C(6)H(4))][BPh(4)], the first examples of kappaF-fluorobenzene and kappa(2)F-1,2-difluorobenzene adducts of transition metals. With the perfluorinated anion [B(C(6)F(5))(4)](-), both Sc and Ti form [Cp*(2)M(kappa(2)F-C(6)F(5))B(C(6)F(5))(3)] contact ion pairs. The nature of the metal-fluoroarene interaction was studied by density functional theory (DFT) calculations and by comparison with the corresponding tetrahydrofuran (THF) adducts and was found to be predominantly electrostatic for all metals studied.     

Zirconium-catalyzed carboalumination of α-olefins and chain growth of aluminum alkyls: kinetics and mechanism

A mechanism based on Michaelis-Menten kinetics with competitive inhibition is proposed for both the Zr-catalyzed carboalumination of α-olefins and the Zr-catalyzed chain growth of aluminum alkyls from ethylene. AlMe(3) binds to the active catalyst in a rapidly maintained equilibrium to form a Zr/Al heterobimetallic, which inhibits polymerization and transfers chains from Zr to Al. The kinetics of both carboalumination and chain growth have been studied when catalyzed by [(EBI)Zr(μ-Me)(2)AlMe(2)][B(C(6)F(5))(4)]. In accord with the proposed mechanism, both reactions are first-order in [olefin] and [catalyst] and inverse first-order in [AlR(3)]. The position of the equilibria between various Zr/Al heterobimetallics and the corresponding zirconium methyl cations has been quantified by use of a Dixon plot, yielding K = 1.1(3) × 10(-4) M, 4.7(5) × 10(-4) M, and 7.6(7) × 10(-4) M at 40 °C in benzene for the catalyst species [rac-(EBI)Zr(μ-Me)(2)AlMe(2)][B(C(6)F(5))(4)], [Cp(2)Zr(μ-Me)(2)AlMe(2)][B(C(6)F(5))(4)], and [Me(2)C(Cp)(2)Zr(μ-Me)(2)AlMe(2)][B(C(6)F(5))(4)] respectively. These equilibrium constants are consistent with the solution behavior observed for the [Cp(2)Zr(μ-Me)(2)AlMe(2)][B(C(6)F(5))(4)] system, where all relevant species are observable by (1)H NMR. Alternative mechanisms for the Zr-catalyzed carboalumination of olefins involving singly bridged Zr/Al adducts have been discounted on the basis of kinetics and/or (1)H NMR EXSY experiments.     

Marked counteranion effects on single-site olefin polymerization processes. Correlations of ion pair structure and dynamics with polymerization activity, chain transfer, and syndioselectivity

Counteranion effects on the rate and stereochemistry of syndiotactic propylene enchainment by the archetypal C(s)-symmetric precatalyst [Me(2)C(Cp)(Flu)]ZrMe(2) (1; Cp = C(5)H(4); Flu = C(13)H(8), fluorenyl) are probed using the cocatalysts MAO (2), B(C(6)F(5))(3) (3)(,) B(2-C(6)F(5)C(6)F(4))(3) (4)(,) Ph(3)C(+)B(C(6)F(5))(4)(-) (5), and Ph(3)C(+)FAl(2-C(6)F(5)C(6)F(4))(3)(-) (6), offering greatly different structural and ion pairing characteristics. Reaction of 1 with 3 affords [Me(2)C(Cp)(Flu)]ZrMe(+) MeB(C(6)F(5))(3)(-) (7). In the case of 4, this reaction leads to formation the micro-methyl dinuclear diastereomers [([Me(2)C(Cp)(Flu)]ZrMe)(2)(micro-Me)](+) MeB(2-C(6)F(5)C(6)F(4))(3)(-) (8). A similar reaction with 6 results in diastereomeric [Me(2)C(Cp)(Flu)]ZrMe(+) FAl(2-C(6)F(5)C(6)F(4))(3)(-) (10) ion pairs. The molecular structures of 7 and 10 have been determined by single-crystal X-ray diffraction. Reorganization pathways available to these species have been examined using EXSY and dynamic NMR, revealing that the cation-MeB(C(6)F(5))(3)(-) interaction is considerably weaker/more mobile than in the FAl(2-C(6)F(5)C(6)F(4))(3)(-)-derived analogue. Polymerizations mediated by 1 in toluene over the temperature range of -10 degrees to +60 degrees C and at 1.0-5.0 atm propylene pressure (at 60 degrees C) reveal that activity, product syndiotacticity, m and mm stereodefect generation, and chain transfer processes are highly sensitive to the nature of the ion pairing. Thus, the complexes activated with 4 and 5, having the weakest ion pairing, yield the highest estimated propagation rates, while with 6, having the strongest pairing, yields the lowest. The strongly coordinating, immobile FAl(2-C(6)F(5)C(6)F(4))(3)(-) anion produces the highest/least temperature-dependent product syndiotacticity, lowest/least temperature-dependent m stereodefect abundance, and highest product molecular weight. These polypropylene microstructural parameters, and also M(w), are least sensitive to increased propylene pressure for FAl(2-C(6)F(5)C(6)F(4))(3)(-), but highest with MeB(C(6)F(5))(3)(-). In general, mm stereodefect production is only modestly anion-sensitive; [propylene] dependence studies reveal enantiofacial propylene misinsertion to be the prevailing mm-generating process in all systems at 60 degrees C, being most dominant with 6, where mm stereodefect abundance is lowest. For 1,3-dichlorobenzene as the polymerization solvent, product syndiotacticity, as well as m and mm stereodefects, become indistinguishable for all cocatalysts. These observations are consistent with a scenario in which ion pairing modulates the rates of stereodefect generating processes relative to monomer enchainment, hence net enchainment syndioselectivity, and also dictates the rate of termination relative to propagation and the preferred termination pathway. In comparison to 3-6, propylene polymerization mediated by MAO (2) + 1 in toluene reveals an estimated ordering in site epimerization rates as 5 > 4 > 2 > 3 > 6, while product syndiotacticities rank as 6 > 2 > 5 approximately 4 > 3.     

NOE and PGSE NMR spectroscopic studies of solution structure and aggregation in metallocenium ion-pairs

The solution structures of the metallocenium homogeneous polymerization catalyst ion-pairs [Cp(2)ZrMe](+)[MeB(C(6)F(5))(3)](-) (1), [(1,2-Me(2)Cp)(2)ZrMe](+)[MeB(C(6)F(5))(3)](-) (2), [(Me(2)SiCp(2))ZrMe](+)[MeB(C(6)F(5))(3)](-) (3), [Me(2)C(Fluorenyl)(Cp)ZrMe](+)[FPBA](-) (FPBA = tris(2,2',2' '-nonafluorobiphenyl)fluoroaluminate) (4), [rac-Et(Indenyl)(2)ZrMe](+)[FPBA](-) (5), [(Me(5)Cp)(2)ThMe](+)[B(C(6)F(5))(4)](-) (6), [(Me(2)SiCp(2))Zr(Me)(THF)](+)[MeB(C(6)F(5))(3)](-) (7), [(Me(2)SiCp(2))Zr(Me)(PPh(3))](+)[MeB(C(6)F(5))(3)](-) (8), [(Me(2)SiCp(2))Zr(Me)(THF)](+)[B(C(6)F(5))(4)](-) (9), [(Me(2)Si(Me(4)Cp)(t-BuN)Zr(Me)(solvent)](+)[B(C(6)F(5))(4)](-) (solvent = benzene, toluene) (10), [(Cp(2)ZrMe)(2)(mu-Me)](+)[MePBB](-) (PBB = tris(2,2',2"-nonafluorobiphenyl)borane) (11), and [(Cp(2)Zr)(2)(mu-CH(2))(mu-Me)](+)[MePBB](-) (12), having the counteranion in the inner (1, 3, 4, 5, and 6) or outer (7, 8, 9, 10, 11, and 12) coordination sphere, have been investigated for the first time in solvents with low relative permittivity such as benzene or toluene by (1)H NOESY and (1)H,(19)F HOESY NMR spectroscopy. It is found that the average interionic solution structures of the inner sphere contact ion-pairs are similar to those in the solid state with the anion B-Me (1, 3) or Al-F (5) vectors oriented toward the free zirconium coordination site. The HOESY spectrum of complex 6 is in agreement with the reported solid-state structure. In contrast, in outer sphere contact ion-pairs 7, 8, 9, and 10, the anion is located far from the Zr-Me(+) moiety and much nearer to the Me(2)Si bridge than in 3. The interionic structure of 8 is concentration-dependent, and for concentrations greater than 2 mM, a loss of structural localization is observed. PGSE NMR measurements as a function of concentration (0.1-5.0 mM) indicate that the tendency to form aggregates of nuclearity higher than simple ion-pairs is dependent on whether the anion is in the inner or outer coordination sphere of the metallocenium cation. Complexes 2, 3, 4, 5, and 6 show no evidence of aggregation up to 5 mM (well above concentrations typically used in catalysis) or at the limit of saturated solutions (complexes 3 and 6), while concentration-dependent behavior is observed for complexes 7, 8, 10, and 11. These outer sphere ion-pairs begin to exhibit significant evidence for ion-quadruples in solutions having concentrations greater than 0.5 mM with the tendency to aggregate being a function of metal ligation and anion structure. Above 2 mM, compound 8 exists as higher aggregates that are probably responsible for the loss of interionic structural specificity.     

Phase behaviour and conductivity study of electrolytes in supercritical hydrofluorocarbons

The purpose of this work was to characterise supercritical hydrofluorocarbons (HFC) that can be used as solvents for electrodeposition. The phase behaviour of CHF(3), CH(2)F(2), and CH(2)FCF(3) containing [NBu(n)(4)][BF(4)], [NBu(n)(4)][B{3,5-C(6)H(3)(CF(3))(2)}(4)] and Na[B{3,5-C(6)H(3)(CF(3))(2)}(4)] was studied and the conditions for forming a single supercritical phase established. Although all three HFCs are good solvents for [NBu(n)(4)][BF(4)] the results show that the CH(2)F(2) system has the lowest p(r) for dissolving a given amount of [NBu(n)(4)][BF(4)]. The solubility of Na[B{3,5-C(6)H(3)(CF(3))(2)}(4)] in CH(2)F(2) was found to be unexpectedly high. Studies of the phase behaviour of CH(2)F(2) containing [NBu(n)(4)][BF(4)] and [Cu(CH(3)CN)(4)][BF(4)] showed that the copper complex was unstable in the absence of CH(3)CN. For CHF(3), [Cu(hfac)(2)] was more soluble and more stable than [Cu(CH(3)CN)(4)][BF(4)] and only increased the phase-separation pressure by a moderate amount. Studies of the conductivity of [NBu(n)(4)][B(C(6)F(5))(4)], [NBu(n)(4)][B{3,5-C(6)H(3)(CF(3))(2)}(4)], [NR(f)Bu(n)(3)][B{3,5-C(6)H(3)(CF(3))(2)}(4)] (R(f) = (CH(2))(3)C(7)F(15)), and Na[B{3,5-C(6)H(3)(CF(3))(2)}(4)] were carried out in scCH(2)F(2). The results show that these salts are more conducting than [NBu(n)(4)][BF(4)] under the same conditions although the increase is much less significant than that reported in previous work in supercritical CO(2) + CH(3)CN. Consequently, either [NBu(n)(4)][BF(4)] or the corresponding BARF salts would be suitable background electrolytes for electrodeposition from scCH(2)F(2).     

Dynamic properties of metallocenium ion pairs in solution by atomistic simulations

We report a molecular dynamics study of the dynamics and energetic of the [H(2)Si(Cp)(2)ZrMe(+)][MeB(C(6)F(5))(3)(-)], IP1, and [Me(2)Si(Cp)(2)ZrMe(+)][B(C(6)F(5))(4)(-)], IP2, ion pairs in benzene. The metrical parameters obtained for the IP1 ion pair are in excellent agreement with the NMR data reported for the strictly related [Me(2)Si(Cp)(2)ZrMe(+)][MeB(C(6)F(5))(3)(-)] ion pair (J. Am. Chem. Soc. 2004, 126, 1448). This validates the molecular modeling protocol we developed. Simulation of the IP2 ion pair suggests that the counterion oscillates between two geometries characterized by a different coordination pattern of the F atoms to the Zr cation. In one case the B(C(6)F(5))(4)(-) coordinates to the metal with two F atoms of the same aryl ring, whereas in the other case two F atoms of different aryl rings are involved in the coordination. Strong solvent reorganization occurs around IP1 and IP2, as well as around the two isolated cations. In the case of the two ion pairs solvent is never coordinated directly to the metal, whereas in the absence of the counterion one benzene molecule is coordinated to the metal through a cation-pi interaction. Free energy calculations result in ion pair free energies of separation of 36.8 and 23.3 kcal/mol for IP1 and IP2, respectively. Simulations with the Zr-B distance fixed at values > 7 A have been also performed. This mimics the situation occurring after counterion displacement by an inserting monomer molecule during olefin polymerization by the title catalysts.     

Half-sandwich bis(tetramethylaluminate) complexes of the rare-earth metals: synthesis, structural chemistry, and performance in isoprene polymerization

The protonolysis reaction of [Ln(AlMe(4))(3)] with various substituted cyclopentadienyl derivatives HCp(R) gives access to a series of half-sandwich complexes [Ln(AlMe(4))(2)(Cp(R))]. Whereas bis(tetramethylaluminate) complexes with [1,3-(Me(3)Si)(2)C(5)H(3)] and [C(5)Me(4)SiMe(3)] ancillary ligands form easily at ambient temperature for the entire Ln(III) cation size range (Ln=Lu, Y, Sm, Nd, La), exchange with the less reactive [1,2,4-(Me(3)C)(3)C(5)H(3)] was only obtained at elevated temperatures and for the larger metal centers Sm, Nd, and La. X-ray structure analyses of seven representative complexes of the type [Ln(AlMe(4))(2)(Cp(R))] reveal a similar distinct [AlMe(4)] coordination (one eta(2), one bent eta(2)). Treatment with Me(2)AlCl leads to [AlMe(4)] --> [Cl] exchange and, depending on the Al/Ln ratio and the Cp(R) ligand, varying amounts of partially and fully exchanged products [{Ln(AlMe(4))(mu-Cl)(Cp(R))}(2)] and [{Ln(mu-Cl)(2)(Cp(R))}(n)], respectively, have been identified. Complexes [{Y(AlMe(4))(mu-Cl)(C(5)Me(4)SiMe(3))}(2)] and [{Nd(AlMe(4))(mu-Cl){1,2,4-(Me(3)C)(3)C(5)H(2)}}(2)] have been characterized by X-ray structure analysis. All of the chlorinated half-sandwich complexes are inactive in isoprene polymerization. However, activation of the complexes [Ln(AlMe(4))(2)(Cp(R))] with boron-containing cocatalysts, such as [Ph(3)C][B(C(6)F(5))(4)], [PhNMe(2)H][B(C(6)F(5))(4)], or B(C(6)F(5))(3), produces initiators for the fabrication of trans-1,4-polyisoprene. The choice of rare-earth metal cation size, Cp(R) ancillary ligand, and type of boron cocatalyst crucially affects the polymerization performance, including activity, catalyst efficiency, living character, and polymer stereoregularity. The highest stereoselectivities were observed for the precatalyst/cocatalyst systems [La(AlMe(4))(2)(C(5)Me(4)SiMe(3))]/B(C(6)F(5))(3) (trans-1,4 content: 95.6 %, M(w)/M(n)=1.26) and [La(AlMe(4))(2)(C(5)Me(5))]/B(C(6)F(5))(3) (trans-1,4 content: 99.5 %, M(w)/M(n)=1.18).     

Heterolytic activation of hydrogen using frustrated Lewis pairs containing tris(2,2',2'-perfluorobiphenyl)borane

The extremely sterically hindered borane tris(2,2',2'-perfluorobiphenyl)borane (PBB) has been structurally characterised. In combination with bulky nitrogen bases, it forms the 'frustrated Lewis pairs' (FLPs) PBB/2,2,6,6-tetramethylpiperidine (TMP) (1), PBB/1,4-diazobicyclo[2.2.2]-octane (DABCO) (2) and PBB/2,6-lutidine (lut) (3). These novel, unquenched acid-base pairs have been shown to effect facile room temperature heterolytic cleavage of dihydrogen to form the ammonium borate salts [2,2,6,6-Me(4)C(5)H(6)NH(2)][HB(C(12)F(9))(3)] (4) and [N(C(2)H(4))(3)NH][HB(C(12)F(9))(3)] (5), and lutidinium borate [2,6-Me(2)C(5)H(3)NH][HB(C(12)F(9))(3)] (6). Although these reactions are equilibria, the reverse reaction and release of hydrogen gas was not apparent at temperatures up to 120 °C. The relative Lewis acidity of PBB has been determined using the Gutmann-Beckett method.     

Trapping unstable terminal M-O multiple bonds of monocyclopentadienyl niobium and tantalum complexes with Lewis acids

Hydrolysis of [NbCp'Cl(4)] (Cp' = η(5)-C(5)H(4)SiMe(3)) with the water adduct H(2)O·B(C(6)F(5))(3) afforded the oxo-borane compound [NbCp'Cl(2){O·B(C(6)F(5))(3)}] (2a). This compound reacted with [MgBz(2)(THF)(2)] giving [NbCp'Bz(2){O·B(C(6)F(5))(3)}] (2b), whereas [NbCp'Me(2){O·B(C(6)F(5))(3)}] (2c) was obtained from the reaction of [NbCp'Me(4)] with H(2)O·B(C(6)F(5))(3). Addition of Al(C(6)F(5))(3) to solutions containing the oxo-borane compounds [MCp(R)X(2){O·B(C(6)F(5))(3)}] (M = Ta, Cp(R) = η(5)-C(5)Me(5) (Cp*), X = Cl 1a, Bz 1b, Me 1c; M = Nb, Cp(R) = Cp', X = Cl 2a) afforded the oxo-alane complexes [MCp(R)X(2){O·Al(C(6)F(5))(3)}] (M = Ta, Cp(R) = Cp*, X = Cl 3a, Bz 3b, Me 3c; M = Nb, Cp(R) = Cp', X = Cl 4a), releasing B(C(6)F(5))(3). Compound 3a was also obtained by addition of Al(C(6)F(5))(3) to the dinuclear μ-oxo compound [TaCp*Cl(2)(μ-O)](2), meanwhile addition of the water adduct H(2)O·Al(C(6)F(5))(3) to [TaCp*Me(4)] gave complex 3c. The structure of 2a and 3a was obtained by X-ray diffraction studies. Density functional theory (DFT) calculations were carried out to further understand these types of oxo compounds.     

Ytterbocenes as one- and two-electron reductants in their reactions with diazadienes: YbIII mixed-ligand bent-sandwich complexes containing a dianion of diazabutadiene

Ytterbocene [Yb(C(5)MeH(4))(2)(thf)(2)] reacts with diazabutadiene 2,6-iPr(2)C(6)H(3)-N=CH-CH=N-C(6)H(3)iPr(2)-2,6 (DAD) as a one-electron reductant to afford a bis(cyclopentadienyl) Yb(III) derivative containing a DAD radical anion [Yb(C(5)MeH(4))(2)(dad(-.))]. However, ytterbocenes [YbCp*(2)(thf)(2)] (Cp*=C(5)Me(5), C(5)Me(4)H) coordinated by sterically demanding cyclopentadienyl ligands act as two-electron reductants in their reactions with DAD. These reactions occur by abstraction of one Cp* ring and result in the formation of novel Yb(III) mixed-ligand bent-sandwich complexes, [YbCp*(dad)(thf)], in which the dianion of DAD has an uncommon terminal eta(4)-coordination to the ytterbium atom. The variable-temperature magnetic measurements of complex [Yb(C(5)Me(5))(dad)(thf)] suggest the existence of redox tautomerism for this compound.     

Group 14 triple-decker cations

The triple-decker cations trans-[(Cp*Sn)(2)(mu-eta(5):eta(5)-Cp*)](+) and trans-[(Cp*Pb)(2)(mu-eta(5):eta(5)-Cp*)](+) have been prepared and structurally characterized as their [B(C(6)F(5))(4)](-) salts from the reactions of [Cp*M][B(C(6)F(5))(4)](M = Sn, Pb) with the appropriate decamethylmetallocene. Both triple-decker cations adopt a cisoid arrangement of terminal Cp* groups, whereas the two known triple-decker main-group anions possess a transoid arrangement of terminal Cp groups. The reason for this conformational difference has been probed on the basis of DFT calculations.     

Reversible, metal-free hydrogen activation by frustrated Lewis pairs

The Lewis acid cyclohexylbis(pentafluorophenyl)boron 1, which exhibits about 15% lower Lewis acidity in comparison with B(C(6)F(5))(3), activates H(2) in the presence of the bulky Lewis bases 2,2,6,6-tetramethylpiperidine (TMP), 1,2,2,6,6-pentamethylpiperidine (PMP), tri-tert-butylphosphine (t-Bu(3)P) leading in facile reactions at room temperature to heterolytic splitting of dihydrogen and formation of the salts [TMPH][CyBH(C(6)F(5))(2)] 2, [PMPH][CyBH(C(6)F(5))(2)] 3 and [t-Bu(3)PH][CyBH(C(6)F(5))(2)] 4, which could be dehydrogenated at higher temperatures. The related Lewis acid 1-phenyl-2-[bis(pentafluorophenyl)boryl]ethane 5 exhibiting about 10% lower Lewis acidity than B(C(6)F(5))(3) is also capable of splitting H(2) in a heterolytic fashion in the presence of TMP, PMP and t-Bu(3)P yielding [TMPH][PhC(2)H(4)BH(C(6)F(5))(2)] 6, [PMPH][PhC(2)H(4)BH(C(6)F(5))(2)] 7 and [t-Bu(3)PH][PhC(2)H(4)BH(C(6)F(5))(2)] 8. Under comparable conditions as for 2-4, the dehydrogenations of 6-8 were much slower. 4b and 6 were characterized by single crystal X-ray diffraction studies.     

Cationic aluminum alkyl complexes incorporating aminotroponiminate ligands

The synthesis, structures, and reactivity of cationic aluminum complexes containing the N,N'-diisopropylaminotroponiminate ligand ((i)Pr(2)-ATI(-)) are described. The reaction of ((i)Pr(2)-ATI)AlR(2) (1a-e,g,h; R = H (a), Me (b), Et (c), Pr (d), (i)Bu (e), Cy (g), CH(2)Ph (h)) with [Ph(3)C][B(C(6)F(5))(4)] yields ((i)()Pr(2)-ATI)AlR(+) species whose fate depends on the properties of the R ligand. 1a and 1b react with 0.5 equiv of [Ph(3)C][B(C(6)F(5))(4)] to produce dinuclear monocationic complexes [([(i)Pr(2)-ATI] AlR)(2)(mu-R)][(C(6)F(5))(4)] (2a,b). The cation of 2b contains two ((i)()Pr(2)-ATI)AlMe(+) units linked by an almost linear Al-Me-Al bridge; 2a is presumed to have an analogous structure. 2b does not react further with [Ph(3)C][B(C(6)F(5))(4)]. However, 1a reacts with 1 equiv of [Ph(3)C][B(C(6)F(5))(4)] to afford ((i Pr(2)-ATI)Al(C(6)F(5))(mu-H)(2)B(C(6)F(5))(2) (3) and other products, presumably via C(6)F(5)(-) transfer and ligand redistribution of a [((i)()Pr(2)-ATI)AlH][(C(6)F(5))(4)] intermediate. 1c-e react with 1 equiv of [Ph(3)C][B(C(6)F(5))(4)] to yield stable base-free [((i)Pr(2)-ATI)AlR][B(C(6)F(5))(4)] complexes (4c-e). 4c crystallizes from chlorobenzene as 4c(ClPh).0.5PhCl, which has been characterized by X-ray crystallography. In the solid state the PhCl ligand of 4c(ClPh) is coordinated by a dative PhCl-Al bond and an ATI/Ph pi-stacking interaction. 1g,h react with [Ph(3)C][B(C(6)F(5))(4)] to yield ((i)Pr(2)-ATI)Al(R)(C(6)F(5)) (5g,h) via C(6)F(5)(-) transfer of [((i)Pr(2)-ATI)AlR][(BC(6)F(5))(4)] intermediates. 1c,h react with B(C(6)F(5))(3) to yield ((i)Pr(2)-ATI)Al(R)(C(6)F(5)) (5c,h) via C(6)F(5)(-) transfer of [((i)Pr(2)-ATI)AlR][RB(C(6)F(5))(3)] intermediates. The reaction of 4c-e with MeCN or acetone yields [((i)Pr(2)-ATI)Al(R)(L)][B(C(6)F(5))(4)] adducts (L = MeCN (8c-e), acetone (9c-e)), which undergo associative intermolecular L exchange. 9c-e undergo slow beta-H transfer to afford the dinuclear dicationic alkoxide complex [(((i)Pr(2)-ATI)Al(mu-O(i)()Pr))(2)][B(C(6)F(5))(4)](2) (10) and the corresponding olefin. 4c-e catalyze the head-to-tail dimerization of tert-butyl acetylene by an insertion/sigma-bond metathesis mechanism involving [((i)Pr(2)-ATI)Al(C=C(t)Bu)][B(C(6)F(5))(4)] (13) and [((i)Pr(2)-ATI)Al(CH=C((t)()Bu)C=C(t)Bu)][B(C(6)F(5))(4)] (14) intermediates. 13 crystallizes as the dinuclear dicationic complex [([(i Pr(2)-ATI]Al(mu-C=C(t)Bu))(2)][B(C(6)F(5))(4)](2).5PhCl from chlorobenzene. 4e catalyzes the polymerization of propylene oxide and 2a catalyzes the polymerization of methyl methacrylate. 4c,e react with ethylene-d(4) by beta-H transfer to yield [((i)Pr(2)-ATI)AlCD(2)CD(2)H][B(C(6)F(5))(4)] initially. Polyethylene is also produced in these reactions by an unidentified active species.     

A carbonyl-rich bridging hydride complex relevant to the Fe-Fe hydrogenase active site

Protonation of Fe(2)(μ-S(2)C(3)H(6))(CO)(6) with an acid derived from [SiEt(3)][B(C(6)F(5))(4)] and HCl affords a hydride-bridged dimer.