Thermal stability of Ag–Au,Cu–Au,and Ag–Cu bimetallic nanoparticles supported on highly oriented pyrolytic graphite

The formation of Ag–Au, Cu–Au, and Ag–Cu bimetallic particles on the surface of highly oriented pyrolytic graphite was studied by X-ray photoelectron spectroscopy. Samples with the core–shell structure of particles were prepared by sequential thermal vacuum deposition. The thermal stability of the samples was studied over a wide range of temperatures (25-400°C) under ultrahigh-vacuum conditions. The heating of the samples to ~250°C leads to the formation of bimetallic alloy particles with a relatively uniform distribution of metals in the bulk. The thermal stability of the samples with respect to sintering depends on the nature of the supported metals. Thus, the Ag–Au particles exhibited the highest thermal resistance (~350°C) under ultrahigh-vacuum conditions, whereas the Ag–Cu particles agglomerated even at ~250°C.     

Equilibrium geometries, stabilities, and electronic properties of the bimetallic M2-doped Au(n) (M = Ag, Cu; n = 1-10) clusters: comparison with pure gold clusters

The density functional method with relativistic effective core potential has been employed to investigate systematically the geometrical structures, relative stabilities, growth-pattern behaviors, and electronic properties of small bimetallic M(2)Au(n) (M = Ag, Cu; n = 1-10) and pure gold Au(n) (n ≤ 12) clusters. The optimized geometries reveal that M(2) substituted Au(n+2) clusters and one Au atom capped M(2)Au(n-1) structures are dominant growth patterns of the stable alloyed M(2)Au(n) clusters. The calculated averaged atomic binding energies, fragmentation energies, and the second-order difference of energies as a function of the cluster size exhibit a pronounced even-odd alternation phenomenon. The analytic results exhibit that the planar structure Ag(2)Au(4) and Cu(2)Au(2) isomers are the most stable geometries of Ag(2)Au(n) and Cu(2)Au(n) clusters, respectively. In addition, the HOMO-LUMO gaps, charge transfers, chemical hardnesses and polarizabilities have been analyzed and compared further.     

Electrochemical reactivity and fractional conductance of nanowires

A theory for electrocatalysis devised in the authors’ group is combined with density functional theory to investigate the electrochemical reactivity of monoatomic nanowires towards hydrogen. On Cu and Au wires, hydrogen atoms are much more strongly adsorbed than on planar surfaces of the bulk metal, while on Ag adsorption is weak. These results explain recent observations of fractional conductances on electrochemical Cu and Au nanowires in the hydrogen evolution region. Free energy surfaces for the adsorption and discharge of the proton show low activation barriers of the order of 0.1 eV for Au and 0.5 eV for Cu. Thus, both Au and, most surprisingly, Cu wires promise to be good catalysts for hydrogen evolution.     

Static investigation of adsorption and hetero‐diffusion of copper,silver, and gold adatoms on the (111) surface

In this work, we have used the static molecular simulations combined with an interatomic potential derived from the embedded‐atom method to study the adsorption and hetero‐diffusion on the (111) surface of Cu, Ag, and Au adatoms by using LAMMPS code. The investigation is performed for six heterogeneous systems such as Ag/Au(111), Ag/Cu(111), Au/Ag(111), Au/Cu(111), Cu/Ag(111), and Cu/Au(111). First, we have investigated the relaxation trends and the bond lengths of the atoms in the systems. The calculation results show that, the top layer spacing between the first and second layers of the Au(111), Ag(111), and Cu(111) substrates is contracted. This contraction is found to be more important in the Au(111) substrate. On the other hand, the strong reduction of the binding length is found in Au/Cu(111) for the different adsorption sites. In addition, the binding, adsorption, and static activation energies for all studied systems were examined. The results indicated that the binding and adsorption energies reached their maximum values in the Au/Cu(111) and Au/Ag(111) systems, respectively. Moreover, the static activation barriers for hopping diffusion on the (111) surfaces are found to be low compared with those found in the (100) and (110) surfaces. Therefore, our calculations showed that the difference in energy between the hcp and fcc sites on the (111) surfaces is very small. Copyright © 2017 John Wiley & Sons, Ltd.     

Supported bimetallic polymers of porphyrins as new heterogeneous catalyst

New heterogeneous catalytic systems of mono and bimetallic polymeric porphyrinic structures confined to Au surface are described. The solid materials were characterized by AFM, SEM and EDS/EDX techniques. The polymeric films have been deposited by consecutive voltammetric cycles. The appearance of a peak at 380 mV (vs. Ag/AgCl), is only observed in the first cathodic scan of the bimetallic structures and was attributed to Cu(III)/Cu(II) reduction in polyFeCuPP. In all the cases studied, the bimetallic structures were up to 3.5 times more efficient catalyst than the corresponding monometallic.

PolyCoCuPP is intrinsically weaker than polyFeCuPP. Nevertheless, the mass deposited is significantly higher (80%). For this reason, polyCoCuPP is considered the best catalyst under practical considerations.

The use of a solid catalyst with a small amount of H₂O₂, in aqueous solution, makes this oxidation an environmentally benign chemical process.     

Structures of bimetallic clusters

We report an optimization algorithm for studying bimetallic nanoclusters. The algorithm combines two state-of-the-art methods, the genetic algorithm and the basin hopping approach, widely employed in the literature for predicting structures of pure metallic and nonmetallic clusters. To critically test the present algorithm and its use in determining the lowest-energy structures of bimetallic nanoclusters, we apply it to study the bimetallic clusters Cu(n)Au(38-n) (0< or =n< or =38). It is predicted that the Au atoms, being larger in size than the Cu atoms, prefer to occupy surface sites showing thus the segregating behavior. As the atom fraction of Cu increases, the bimetallic cluster Cu(n)Au(38-n), as a whole, first takes on an amorphous structure and is followed by dramatic changes in structure with the Cu atoms revealing hexagonal, then assuming pentagonal, and finally shifting to octahedral symmetry in the Cu-rich range.     

Polymer‐Supported Bimetallic Ag@AgAu Nanocomposites: Synthesis and Catalytic Properties

Supported noble bimetallic nanomaterials have attracted great interest owing to their applications in catalysis. Herein, polystyrene‐supported Ag@AgAu bimetallic nanocomposites were synthesized by using a seed‐growth route. The size and degree of coverage of the Ag@AgAu NPs could be controlled by changing the experimental parameters. SEM, TEM, STEM, EDS, and XPS analysis was used to characterize the morphology, structure, and composition of these nanocomposites. We found that the bimetallic nanoparticles on the polystyrene beads had a core–shell structure that was comprised of a Ag core and a AgAu alloy shell. The optical properties of the nanocomposites were also studied by UV/Vis/NIR spectroscopy, which indicated that the localized surface plasmon resonance (LSPR) absorptions of the nanocomposites could be tailored over a large scale from 450 nm to 950 nm. The catalytic properties of the nanocomposites were studied by using the reduction of 4‐nitrophenol (4‐NP) by NaBH₄ as a model system. The results showed that the catalytic activity of the polystyrene‐supported Ag@AgAu bimetallic nanocomposites was remarkably superior to that of polystyrene‐supported monometallic Ag and Au nanocomposites with the same nanoparticle size. In addition, an investigation of the recycling catalytic activity of the PS‐Ag@AgAu nanocomposites revealed that the catalyst possessed good stability. The enhancement of the catalytic activity was proposed to be due to the ligand and strain effects between Ag and Au.     

Geometry optimization of bimetallic clusters using an efficient heuristic method

In this paper, an efficient heuristic algorithm for geometry optimization of bimetallic clusters is proposed. The algorithm is mainly composed of three ingredients: the monotonic basin-hopping method with guided perturbation (MBH-GP), surface optimization method, and iterated local search (ILS) method, where MBH-GP and surface optimization method are used to optimize the geometric structure of a cluster, and the ILS method is used to search the optimal homotop for a fixed geometric structure. The proposed method is applied to Cu(38-n)Au(n) (0 ≤ n ≤ 38), Ag(55-n)Au(n) (0 ≤ n ≤ 55), and Cu(55-n)Au(n) (0 ≤ n ≤ 55) clusters modeled by the many-body Gupta potential. Comparison with the results reported in the literature indicates that the present method is highly efficient and a number of new putative global minima missed in the previous papers are found. The present method should be a promising tool for the theoretical determination of ground-state structure of bimetallic clusters. Additionally, some key elements and properties of the present method are also analyzed.     

Biogenic synthesis of Ag, Au and bimetallic Au/Ag alloy nanoparticles using aqueous extract of mahogany (Swietenia mahogani JACQ.) leaves

In this paper, we have demonstrated for the first time, the superb efficiency of aqueous extract of dried leaves of mahogany (Swietenia mahogani JACQ.) in the rapid synthesis of stable monometallic Au and Ag nanoparticles and also Au/Ag bimetallic alloy nanoparticles having spectacular morphologies. Our method was clean, nontoxic and environment friendly. When exposed to aqueous mahogany leaf extract, competitive reduction of Au(III) and Ag(I) ions present simultaneously in same solution leads to the production of bimetallic Au/Ag alloy nanoparticles. UV-visible spectroscopy was used to monitor the kinetics of nanoparticles formation. UV-visible spectroscopic data and TEM images revealed the formation of bimetallic Au/Ag alloy nanoparticles. Mahogany leaf extract contains various polyhydroxy limonoids which are responsible for the reduction of Au(III) and Ag(I) ions leading to the formation and stabilization of Au and Ag nanopaticles.     

Synthesis of Au, Au/Ag, Au/Pt and Au/Pd nanoparticles using the microwave-polyol method

Gold, Au/Ag, Au/Pt and Au/Pd bimetallic nanoparticles with varying mol fractions were synthesized in ethylene glycol and glycerol, using the microwave technique in the presence of a stabilizer poly(N-vinylpyrrolidone) (PVP). It was found that bimetallic colloids of Au/Ag, Au/Pd and Au/Pt form an alloy either on co-reduction of respective metal ions or on mixing individual sols.     

缺陷石墨烯吸附Au、Ag、Cu的第一性原理计算

采用基于密度泛函理论的投影缀加波方法研究了Au、Ag、Cu吸附在缺陷石墨烯单侧和双侧的体系,对吸附体系的吸附能、磁性、电荷转移和电子结构进行了计算和分析.缺陷石墨烯吸附Au、Ag、Cu体系的吸附能比本征石墨烯增加2 eV以上,说明三种金属原子更容易吸附在缺陷位置;吸附体系的电荷密度差分和电子结构的结果表明,Au、Ag、Cu与缺陷石墨烯之间均为化学吸附.计算吸附体系的磁性发现,单侧吸附时三种吸附体系均有磁性,磁矩大约为1μB;双侧吸附时,三种吸附体系磁矩大约为2μB.     

CO adsorption on pure and binary-alloy gold clusters: a quantum chemical study

We performed density-functional theory analysis of nondissociative CO adsorption on 22 binary Au-alloy (Au(n)M(m)) clusters: n=0-3, m=0-3, and m+n=2 (dimers) or 3 (trimers), M=Cu/Ag/Pd/Pt. We report basis-set superposition error corrections to adsorption energies and include both internal energy of adsorption (DeltaU(ads)) and Gibbs free energy of adsorption (DeltaG(ads)) at standard conditions (298.15 K and 1 atm). We found onefold (atop) CO binding on all the clusters except Pd2 (twofold/bridged), Pt2 (twofold/bridged), and Pd3 (threefold). In agreement with the experimental results, we found that CO adsorption is thermodynamically favorable on pure Au/Cu clusters but not on pure Ag clusters and also observed the following adsorption affinity trend: Pd>Pt>Au>Cu>Ag. For alloy dimers we found the following patterns: Au2>M Au>M2 (M=Ag/Cu) and M2>M Au>Au2 (M=Pd/Pt). Alloying Ag/Cu dimers with (more reactive) Au enhanced adsorption and the opposite effect was observed for PdPt dimers. The Ag-Au, Cu-Au, and Pd-Au trimers followed the trends observed on dimers: Au3>M Au2>M2Au>M3 (M=Ag/Cu) and Pd3>Pd2Au>PdAu2>Au3. Interestingly, Pt-Au trimers reacted differently and alloying with Au systematically increased the adsorption affinity: PtAu2>Pt2Au>Pt3>Au3. A strikingly different behavior of Pt is also manifested by the triplet spin state and onefold (atop) binding in Pt3-CO which is in contradiction with the singlet spin state and threefold binding in Pd3-CO. We found a linear correlation between CO binding energy (BE) and elongation of the CO bond. For Ag-Au and Cu-Au clusters, the increase in CO BE (and elongation of the C-O bond which is probably due to the back donation) is accompanied by the decrease in the cluster-CO distance suggesting that the donation (from 5sigma highest occupied molecular orbital in CO to cluster lowest unoccupied molecular orbital) mechanism also contributes to the BE. For Pd-Au clusters, the cluster-CO distance (and CO bond length) increases with increase in the BE, suggesting that the donation mechanism may not be important for those clusters. No clear trend was observed for Pt-Au clusters.     

Ionization potentials and electron affinities of Cu,Ag, and Au: Electron correlation and relativistic effects

The electron correlation and relativistic effects on ionization potentials and electron affinities of Cu, Ag, and Au are investigated in the framework of the coupled cluster method and different 1-component approximations to the relativistic Dirac-Coulomb Hamiltonian. The first-order perturbation approach based on the massvelocity and Darwin terms is found to be sufficiently accurate for Cu and Ag while it fails for Au. The spin-averaged Douglas-Kroll no-pair method gives excellent results for the studied atomic properties. The ionization potentials obtained within this method and the coupled cluster scheme for the electron correlation effects are 7.733(7.735) eV for Cu, 7.461(7.575) eV for Ag, and 9.123(9.225) eV for Au (experimental values given in parentheses). The calculated (experimental) electron affinity results for Cu, Ag, and Au are 1.236(1.226), 1.254(1.303), and 2.229(2.309) eV, respectively. There is a marked relativistic effect on both the ionization potential and electron affinity of Ag which sharply increases for Au while Cu exhibits only a little relativistic character. A similar pattern of relativistic effects is also observed for electric dipole polarizabilities of the coinage metal atoms and their ions. The coupled cluster dipole polarizabilities of the coinage metal atoms calculated in this article in the Douglas-Kroll no-pair formalism (Cu: 46.50 au; Ag: 52.46 au; Au: 36.06 au) are compared with our earlier data for their singly positive and singly negative ions. © 1997 John Wiley & Sons, Inc. Int J Quant Chem 63: 557–565, 1997     

Au–Ag Nanoflower Catalysts with Clean Surfaces for Alcohol Oxidation

Shape‐controlled metal nanocrystals, such as nanowires and nanoflowers, are attractive owing to their potentially novel catalytic properties and bimetallic nanocrystals composed of two distinct metals are expected to act as highly active catalysts. However, their catalytic activities are limited because of the capping agents adsorbed on the metal surfaces, which are necessary for the preparation and dispersion of these nanocrystals in solvents. Therefore, the preparation of bimetallic shape‐controlled noble metal nanocrystals with clean surfaces, devoid of almost all capping agents, are expected to have high catalytic activity. Herein, we report the preparation of bimetallic Au–Ag nanoflowers using melamine as the capping agent. The bimetallic Au–Ag nanoflowers with a clean surface were subsequently obtained by a support and extraction method. The bimetallic nanoflowers with a clean surface were then used for the aerobic oxidation of 1‐phenylethyl alcohol and they exhibited high rates for the formation of acetophenone compared to Au nanoflowers and spherical nanoparticles with almost the same size and Au/Ag ratio. We also show that Au–Ag nanoflowers containing only 1 % Ag (Au₉₉–Ag₁NFs) exhibit the highest rate of acetophenone formation among Au–Ag nanoflowers with different Au/Ag ratios owing to an increase in the electron density of the Au atoms that act as active sites for the oxidation of 1‐phenylethyl alcohol.     

Comparative toxicity study of Ag, Au, and Ag–Au bimetallic nanoparticles on Daphnia magna

A comparative assessment of the 48-h acute toxicity of aqueous nanoparticles synthesized using the same methodology, including Au, Ag, and Ag–Au bimetallic nanoparticles, was conducted to determine their ecological effect in freshwater environments through the use of Daphnia magna, using their mortality as a toxicological endpoint. D. magna are one of the standard organisms used for ecotoxicity studies due to their sensitivity to chemical toxicants. Particle suspensions used in toxicity testing were well-characterized through a combination of absorbance measurements, atomic force or electron microscopy, flame atomic absorption spectrometry, and dynamic light scattering to determine composition, aggregation state, and particle size. The toxicity of all nanoparticles tested was found to be dose and composition dependent. The concentration of Au nanoparticles that killed 50% of the test organisms (LC₅₀) ranged from 65–75 mg/L. In addition, three different sized Ag nanoparticles (diameters = 36, 52, and 66 nm) were studied to analyze the toxicological effects of particle size on D. magna; however, it was found that toxicity was not a function of size and ranged from 3–4 μg/L for all three sets of Ag nanoparticles tested. This was possibly due to the large degree of aggregation when these nanoparticles were suspended in standard synthetic freshwater. Moreover, the LC₅₀ values for Ag–Au bimetallic nanoparticles were found to be between that of Ag and Au but much closer to that of Ag. The bimetallic particles containing 80% Ag and 20% Au were found to have a significantly lower toxicity to Daphnia (LC₅₀ of 15 μg/L) compared to Ag nanoparticles, while the toxicity of the nanoparticles containing 20% Ag and 80% Au was greater than expected at 12 μg/L. The comparison results confirm that Ag nanoparticles were much more toxic than Au nanoparticles, and that the introduction of gold into silver nanoparticles may lower their environmental impact by lowering the amount of Ag which is bioavailable.     

One-pot synthesis of Ag-Au bimetallic nanoparticles with Au shell and their high catalytic activity for aerobic glucose oxidation

PVP-protected Ag(core)/Au(shell) bimetallic nanoparticles of enough small size, i.e., 1.4nm in diameter were synthesized in one-vessel using simultaneous reduction of the corresponding ions with rapid injection of NaBH(4), and characterized by HR-TEM. The Ag(core)/Au(shell) bimetallic nanoparticles show a high and durable catalytic activity for the aerobic glucose oxidation, and the catalyst can be stably kept for more than 2months under ambient conditions. The highest activity (16,890mol-glucoseh(-1)mol-metal(-1)) was observed for the bimetallic nanoparticles with Ag/Au atomic ratio of 2/8, the TOF value of which is several times higher than that of Au nanoparticles with nearly the same particle size. The higher catalytic activity of the prepared bimetallic nanoparticles than the usual Au nanoparticles can be ascribed to: (1) the small average diameter, usually less than 2.0nm, and (2) the electronic charge transfer effect from adjacent Ag atoms and protecting PVP to Au active sites. In contrast, the Ag-Au alloy nanoparticles, synthesized by dropwise addition of NaBH(4) into the starting solution and having the large mean particle size, showed a low catalytic activity.     

Rapid synthesis of Au, Ag, and bimetallic Au core-Ag shell nanoparticles using Neem (Azadirachta indica) leaf broth

We report on the use of Neem (Azadirachta indica) leaf broth in the extracellular synthesis of pure metallic silver and gold nanoparticles and bimetallic Au/Ag nanoparticles. On treatment of aqueous solutions of silver nitrate and chloroauric acid with Neem leaf extract, the rapid formation of stable silver and gold nanoparticles at high concentrations is observed to occur. The silver and gold nanoparticles are polydisperse, with a large percentage of gold particles exhibiting an interesting flat, platelike morphology. Competitive reduction of Au3+ and Ag+ ions present simultaneously in solution during exposure to Neem leaf extract leads to the synthesis of bimetallic Au core-Ag shell nanoparticles in solution. Transmission electron microscopy revealed that the silver nanoparticles are adsorbed onto the gold nanoparticles, forming a core-shell structure. The rates of reduction of the metal ions by Neem leaf extract are much faster than those observed by us in our earlier studies using microorganisms such as fungi, highlighting the possibility that nanoparticle biological synthesis methodologies will achieve rates of synthesis comparable to those of chemical methods.     

Structures of mixed gold-silver cluster cations (Ag(m)Au(n)+, m+n<6): ion mobility measurements and density-functional calculations

The collision cross sections of Ag(m)Au(n)+ (m+n)<6 cluster ions were determined. For bimetallic clusters, we observe a significant intracluster charge transfer leaving most of the ions positive charge on the silver atoms. The mixed trimeric ions Ag2Au+ and AgAu2+ are triangular like the pure gold and silver trimers. Most of the tetrameric clusters are rhombus shaped, with the exception of Ag3Au+, which has a Y structure with the gold atom in the center. Among the pentamers we find distorted X structures for all systems. For Ag2Au3+ we find an additional isomer which is a trigonal bipyramid. These findings are in line with predictions based on density-functional theory calculations, i.e., all these structures either represent the global minima or are within less than 0.1 eV of the predicted global minimum.     

缺陷石墨烯吸附Au、Ag、Cu的第一性原理计算

采用基于密度泛函理论的投影缀加波方法研究了Au、Ag、Cu吸附在缺陷石墨烯单侧和双侧的体系,对吸附体系的吸附能、磁性、电荷转移和电子结构进行了计算和分析. 缺陷石墨烯吸附Au、Ag、Cu体系的吸附能比本征石墨烯增加2 eV以上,说明三种金属原子更容易吸附在缺陷位置;吸附体系的电荷密度差分和电子结构的结果表明,Au、Ag、Cu与缺陷石墨烯之间均为化学吸附. 计算吸附体系的磁性发现,单侧吸附时三种吸附体系均有磁性,磁矩大约为1μ_B;双侧吸附时,三种吸附体系磁矩大约为2μ_B.     

Fabrication of Ag/Au bimetallic nanoparticles by UPD-redox replacement: Application in the electrochemical reduction of benzyl chloride

The bimetallic Ag/Au nanoparticles were prepared by underpotential deposition-redox replacement technique on the basis of Au nanoparticles modified glassy carbon (GC) electrode. The as-prepared Ag/Au nanoparticles were characterized by scanning electron microscopy and energy-dispersive X-ray spectroscopy. The Ag/Au bimetallic nanoparticles modified GC electrode with low-Ag loading exhibits much better catalytic activity for the reduction of benzyl chloride than Ag nanoparticles modified GC electrode. The result is attributed to the synergic effect between Ag and Au in the reduction process. The chronoamperometry test shows that the Ag/Au nanoparticles possess long-term performance in the electrolysis.