Oxidation of aromatic sulfides with molecular oxygen: Controllable synthesis of sulfoxides or sulfones

The recent development of selective oxidation of aromatic sulfides with molecular oxygen was highlighted. The sulfoxides and sulfones could be obtained by simply switching the reaction media, i.e., bis(2-butoxyethyl)ether (BBE) or poly(ethylene glycol)dimethyl ether (PEGDME). The application of the high-boiling-point polyether as an initiator and green media can eliminate the need of large quantities of additives and volatile solvents. This strategy represents an economic and eco-friendly method that could find potential applications.     

Selective oxidation of sulfides to sulfoxides and sulfones using 30% aqueous hydrogen peroxide and silica-vanadia catalyst

A green, efficient and selective approach for the oxidation of sulfides to sulfoxides and sulfones with stoichiometric amount of 30% aq. H₂O₂ is reported. The reaction is performed in methanol with silica-vanadia as heterogeneous and reusable catalyst.     

A comparison of hydrogen bonding solvent effects on the singlet oxygen reactions of allyl and vinyl sulfides, sulfoxides, and sulfones

The singlet oxygen (¹Δ_g) photooxidations of 2-methyl-3-phenylthio-2-butene (1a), 1-[(4-nitrophenyl)thio]-2,3-dimethyl-2-butene (2c), 2-methyl-3-phenylsulfinyl-2-butene (3), 2-methyl-3-phenylsulfonyl-2-butene (6), and 1-[(4-nitrophenyl)sulfonyl]-2,3-dimethyl-2-butene (7c) were conducted in the following deuterated solvents: acetonitrile, benzene, chloroform, methanol, or methanol/water mixture. In each case the ene allylic hydroperoxide products and/or the [2+2] cycloaddition products were quantified and inspected for possible hydrogen bonding induced differences in product selectivity and regiochemistry. After comparison to literature values for related substrates, the results indicate that only photooxidations of vinyl sulfides are susceptible to hydrogen bonding solvent effects.     

1-(2’-烷硫基乙氧基)甲基尿嘧啶及其氧化物的合成

采用 3 0 %H2 O2 /DEAD的试剂组合 ,用于将硫醚及亚砜的衍生物氧化成砜类物质的反应 ,合成了1 ( 2 烷硫基乙氧基 )甲基尿嘧啶及其氧化物 ,产物结构经元素分析、1HNMR和IR进行表征 ,并研究了其抗癌活性     

A novel rapid sulfoxidation of sulfides with cyclohexylidenebishydroperoxide

Cyclohexylidenebishydroperoxide was successfully used as the oxygen source for the oxidation of sulfides to sulfoxides for the first time. The sulfoxides were obtained in good to high yields without any detectable over-oxidation to sulfones under normal conditions.     

A mild protocol for the deoxygenation of α-hydrogen-containing sulfoxides to the corresponding sulfides

A mild method for the deoxygenation of α-hydrogen-containing sulfoxides to sulfides is reported. This synthetically useful and operationally simple protocol derives mechanistically from the Swern oxidation methodology.     

2,6-Dicarboxypyridinium chlorochromate: an efficient and selective reagent for the oxidation of thiols to disulfides and sulfides to sulfoxides

2,6-Dicarboxypyridinium chlorochromate (2,6-DCPCC) was found to be an efficient reagent for the conversion of thiols to disulfides and sulfides to sulfoxides under neutral and anhydrous conditions in good to excellent yields. Selective oxidation of thiols in the presence of sulfides at room temperature is also observed with this reagent.     

The first application of titanocenes in the asymmetric oxidation of sulfides

Investigations were carried out on the oxidation of sulfides to sulfoxides catalyzed by the commercial Cp₂Ti(X)₂ (X=Cl, OTf)/t-butyl hydroperoxide (TBHP). The asymmetric version of prochiral sulfides oxidation was achieved using Cp₂TiCl₂, as transition metal catalyst, in the presence of (+)-(R)-BINOL, as chiral ligand and activated 4 Å molecular sieves (m.s.).     

Safe oxidation of sulfides into sulfoxides using SIBX

SIBX is a stabilized (i.e., nonexplosive) formulation of the λ⁵-iodane 2-iodoxybenzoic acid IBX that can be used as a suspension in various organic solvents to oxidize safely sulfides into sulfoxides. Most yields are comparable to those obtained using IBX or other iodanes such as PhIO and PhIO₂. An asymmetric version of this SIBX-mediated sulfoxidation was performed in high chemical yield and moderate enantioselectivity by simple addition of an external chiral source.     

One-pot preparation of Julia-Kocienski sulfides and sulfones from alcohols

A method for one-pot preparation of Julia-Kocienski sulfides and sulfones from alcohols and thiols is reported. A variety of primary alcohols were converted to the corresponding mesylates by methansulfonyl chloride and triethylamine in THF. After the reaction is complete, thiol (1 or 10) and either NaH or t-BuOK were added. The Julia-Kocienski sulfides 3, 9 and 11 were prepared by one-pot two steps procedure from alcohols in 76–96% yields (16 examples). Furthermore, after the sulfide formation, the reaction mixture was neutralized by p-toluenesulfonic acid and treated with H₂O₂ and ammonium molybdate in EtOH to give the Julia-Kocienski sulfones 4 in good yields except for trans-2-hexen-1-ol.     

Synthesis of fluoro-substituted monomers bearing a functionalised lateral chain: Part 2. Preparation of sulfoxides and sulfones containing monomers

The oxidation of ω-(ω-perfluoroalkylalkyl-sulfanyl)-alkyl acrylates to corresponding sulfoxides and sulfones is described in this paper.     

Selective and efficient oxidation of sulfides to sulfoxides with N-bromosuccinimide in the presence of β-cyclodextrin in water

A simple and highly selective oxidation of sulfides to sulfoxides with N-bromosuccinimide (NBS) catalyzed by β-cyclodextrin in water has been developed. A series of sulfides were oxidized selectively at room temperature in excellent yields. This reaction proceeds without over-oxidation to sulfones under mild conditions using water as a solvent and has many advantages over the existing methodologies.     

Tetrabutylammonium phosphomolybdate on fluorapatite: an efficient solid catalyst for solvent-free selective oxidation of sulfides

A new synthetic method of sulfoxides and sulfones using solvent-free oxidations of sulfides with urea–hydrogen peroxide complex (urea–H₂O₂) and tetrabutylammonium phosphomolybdate catalyst on fluorapatite ((Bu₄N)₃[PMo₁₂O₄₀]/FAp). In the solid-phase system the oxidations of aromatic and alkyl sulfides proceeded at 4–25 °C and the corresponding sulfoxides or sulfones were selectively obtained in good yields by controlling the amount of urea–H₂O₂.     

A Selective Solid State Oxidation of Sulfides and Thiols with Benzyltriphenylphosphonium Peroxymonosulfate

Benzyltriphenylphosphonium peroxymonosulfate 1 could be used for oxidation of sulfides 2 and thiols 4 to their corresponding sulfoxides 3 and disulfides 5 under solid-phase conditions.     

Selective hydrogen peroxide oxidation of sulfides to sulfoxides or sulfones with MWW-type titanosilicate zeolite catalyst under organic solvent-free conditions

Selective oxidation of sulfides to sulfoxides and sulfones with hydrogen peroxide under organic solvent-free conditions was demonstrated by the MWW-type titanosilicate zeolite catalyst. Sulfides were oxidized smoothly to give sulfoxides with good selectivities at ambient temperature using 1.0–1.2 equiv of hydrogen peroxide with the MWW-type titanosilicate zeolite catalyst. Especially, the Ti-MWW with an interlayer-expanded structure (Ti-IEZ-MWW) catalyst showed high activity with good chemoselectivity for the oxidation of various sulfides. The catalyst is recyclable for at least five cycles, and the only byproduct is water. Sulfides were directly oxidized to give sulfones in high yields by 2.5 equiv of hydrogen peroxide with the MWW-type titanosilicate zeolite catalyst under organic solvent-free conditions.     

Metal-free imination of sulfoxides and sulfides

Using a nitrogen transfer agent obtained in situ by mixing of NsNH₂ and PhI(OAc)₂, various N-nosyl sulfoximines and N-nosyl sulfilimines have been prepared under metal-free conditions starting from the corresponding sulfoxides and sulfides, respectively.     

Selective synthesis of sulfoxides and sulfones by tantalum(V) catalyzed oxidation of sulfides with 30% hydrogen peroxide

The reaction of sulfides with 30% hydrogen peroxide catalyzed by tantalum(V) chloride in acetonitrile, i-propanol, or t-butanol selectively provided the corresponding sulfoxides in high yields. On the other hand, the reaction of sulfides with 30% hydrogen peroxide-catalyzed by tantalum(V) chloride or tantalum(V) ethoxide in methanol effectively gave the sulfones.     

Synthesis of sulfides under solvent- and catalyst-free conditions

Abstract  A simple, highly efficient, and green protocol has been developed for preparation of sulfides from alkyl or aryl thiols and benzyl-, allyl-, t-butyl, and adamantyl halides under solvent- and catalyst-free conditions. Graphical abstract