Effect of lateral substituents on the mesomorphic properties of side-chain liquid crystalline polysiloxanes containing 4-[(S)-2-methyl-1-butoxy]phenyl 4-(alkenyloxy)benzoate side groups

The synthesis of side-chain liquid crystalline polysiloxanes containing either 4-[(S)-2-methyl-1-butoxy]phenyl 4-(alkenyloxy)benzoate or laterally fluoro-, chloro-, bromo-, and methoxy-substituted 4-[(S)-2-methyl-1-butoxy]phenyl 4-(alkenyloxy)benzoate mesogenic side groups is presented. The mesomorphic properties of the synthesized polymers have been characterized by optical polarizing microscopy, differential scanning calorimetry, and X-ray diffraction measurements. The effects of spacer length and lateral substituent on the mesomorphic properties of the obtained polymers are examined. The five polymers which contain three methylene units in the spacers show no mesophase, while the five polymers which contain eleven methylene units in the spacer display smectic mesomorphism. Among the other fifteen polymers which contain respectively four, five, or six methylene units in the spacers, those with small fluoro and chloro substituents reveal respectively an S_A phase, while those with bulky bromo and methoxy substituents show no liquid crystalline behavior. The experimental results demonstrate that introducing a bulky lateral substituent into the mesogenic core of a polymer depresses the tendency to form a mesophase. Furthermore, the technique of thermally stimulated current has been used to study the dipolar relaxation mechanisms in a side-chain liquid crystalline polysiloxane. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 2793–2800, 1997     

Morphological alignment of liquid crystalline conducting polyacetylene derivatives

We have synthesized novel liquid crystalline conducting polymers by introducing liquid crystalline group into acetylene monomer and polymerizing them with Ziegler-Natta [Fe(acac)₃ - AlEt₃] and metathesis [M0Cl₅ - Ph₄Sn] catalysts. The liquid crystalline group is composed of a phenylcyclohexyl (PCH) or biphenyl (BP) moiety as a mesogenic core, a trimethylene chain [-(CH₂)₃-] as a spacer, and an alkyl chain (-C_nH_2n+1, n = 2, 3, 5 ∼ 8) as a terminal group. The polymers are abbreviated as PPCHn03A and PBPn03A. All polymers prepared exhibited solubility in organic solvents and smectic liquid crystallinity characterized with fan-shaped texture in polarizing optical microscopy. Phase transitions and the corresponding enthalpy changes were also evaluated by means of differential scanning calorimetry (DSC). Macroscopic alignments of the polymers were performed in the liquid crystalline phase by shear-stress or magnetic force field of 0.7 − 1.0 tesla, which resulted in an enhancement by two orders in electrical conductivity of iodine-doped cast films. Changes of the electronic and geometrical structures of the polymer upon the iodine-doping were elucidated by examining the effective conjugation length of a polyene chain, cis and trans thermal isomerization, and spin distribution of unpaired electrons through ultraviolet / visible (UV-Vis) and electron spin resonance (ESR) measurements.     

Synthesis and characterisation of polymethacrylates containing para-, meta- and ortho-monosubstituted azobenzene moieties in the side chain

Three sets of novel side-chain liquid crystalline polymers with monosubstituted azobenzene moieties in the side-chain have been studied. These are poly(p-(4′-methoxy-4-oxyhexyloxy azobenzene) benzyl methacrylate) (PPHABM), poly(m-(4′-methoxy-4-oxyhexyloxy azobenzene) benzyl methacrylate) (PMHABM) and poly(o-(4′-methoxy-4-oxyhexyloxy azobenzene) benzyl methacrylate) (POHABM). The chemical structure of the monomers was confirmed by ¹H NMR, ¹³C NMR spectroscopy and elemental analysis. The structural characterisation of the polymers was performed by ¹H NMR spectroscopy and gel permeation chromatography, and their phase behaviour and liquid crystalline properties were studied using differential scanning calorimetry, polarised optical microscopy and wide-angle X-ray diffraction. The results show that the transitional behaviour of side-chain liquid crystalline polymers containing monosubstituted azobenzene moieties depends strongly on the position of the substituent on the azobenzene moiety; for example, the ortho-monosubstituted polymers do not form liquid crystalline phases, but all the para- and meta-monosubstituted polymers exhibit a smectic A phase. Furthermore, the glass transition temperature (T_g ) of the polymers decreases in the order, para > meta > ortho. For the PPHABM and PMHABM polymers the isotropic temperature (T_i ) and liquid crystalline range (ΔT, from T_g to T_i ) are found to be in the order, para > meta, although it is surprising that the associated enthalpy changes in these polymers is the opposite order, meta > para.     

Novel thermotropic liquid crystalline‐cum‐photocrosslinkable polyvanillylidene alkyl/arylphosphate esters

A new class of linear unsaturated polyphosphate esters based on divanillylidene cyclohexanone possessing liquid crystalline‐cum‐photocrosslinkable properties have been synthesized from 2,6‐bis[n‐hydroxyalkyloxy(vanillylidene)]cyclohexanone [n = 6,8,10] with various alkyl/aryl phosphorodichloridates in chloroform at ambient temperature. The resultant polymers were characterized by intrinsic viscosity, FT‐IR, ¹H, ¹³C, and ³¹P‐NMR spectroscopy. All the polymers showed anisotropic behavior under hot stage optical polarized microscope (HOPM). The liquid crystalline textures of the polymers became more transparent with increasing spacer length. The thermal behavior of the polymers was studied by thermogravimetric analysis and differential scanning calorimetry. The T_g, T_m, and T_i of the polymers decreased with increasing flexible methylene chain. The photocrosslinking property of the polymer was investigated by UV light/UV spectroscopy; the crosslinking proceeds via 2π‐2π cycloaddition reactions of the divanillylidene exocyclic double bond of the polymer backbone. The pendant alkyloxy containing polymers show faster crosslinking than the pendant phenyloxy containing polymers. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5215–5226, 2004     

Surface-relief-grating formation behavior of two hyperbranched azo polymers

In this work,surface-relief-grating formation behavior was studied by using two hyperbranched azo polymers.The hyperbranched polymers containing pseudo-stilbene type azo chromophores throughout the hyperbranched structure were synthesized by step-growth polycondensation of AB₂ type monomers.The AB₂ monomer,4-（4’-（bis（2-chloroethyl）amino）-phenylazo） benzoic acid（BAA）,was prepared through azo-coupling reaction between N,N’-bis（2-chloroethyl）aniline and 4- aminobenzenic acid.The another AB₂ monomer,4-（4’-（bis（2-chloroethyl）amino）phenylazo）-3-nitro-benzoic acid（BANA）, was prepared through azo-coupling reaction between N,N-bis（2-chloroethyl）aniline and 3-nitro-4-aminobenzcnic acid.The hyperbranched polymers（PBAA and PBANA） were prepared through nucleophilic substitution reaction of BAA and BANA, respectively.The polymers synthesized were characterized by using spectroscopic methods and thermal analysis.The photoinduced dichroism and photo-induced surface-relief-grating（SRG） formation of the hyperbranched polymers were investigated upon irradiation with Ar⁺ laser at 488 nm.PBAA shows typical photoinduced dichroism SRG formation behavior.On the contrary,PBANA does not show the photoresponsive properties.The results indicate that the nitro at the ortho position of azo group of PBANA shows the effect of inhibiting the photoinduced variations.The effect can be attributed to the blockage of the trans-cis isomerization of the azobenzene moieties by the steric hindrance.     

Synthesis of novel multi-arm star azobenzene side-chain liquid crystalline copolymers with a hyperbranched core

A series of novel multi-arm star side-chain liquid crystalline (LC) copolymers with hyperbranched core moieties were synthesized by atom transfer radical polymerization (ATRP) using a multi-functional hyperbranched polyether as the initiator and chlorobenzene as the solvent. The multi-functional hyperbranched polyether initiator was prepared from poly(3-ethyl-3-(hydroxymethyl)oxetane) (PEHO) and 2-bromo-2-methylpropionyl bromide. The azobenzene side-chain liquid crystalline arms were designed to have an LC conformation of poly[6-(4-methoxy-4^′-oxy-azobenzene)hexyl methacrylate] with different molecular weights. Their characterization was performed with ¹H NMR, size exclusion chromatograph (SEC), differential scanning calorimetry (DSC) and thermal polarized optical microscopy (POM). The multi-arm star side-chain liquid crystalline copolymers exhibited a smectic and a nematic phase, and the phase transition temperatures from the smectic to the nematic phase and from the nematic to isotropic phase increased with increasing the molecular weight of the multi-arm star side-chain liquid crystalline copolymers from 1.78 × 10⁴ to 9.07 × 10⁴.     

A new method for analysis of disulfide-containing proteins by matrix-assisted laser desorption ionization (MALDI) mass spectrometry

A simple and high-throughput method for the identification of disulfide-containing peptides utilizing peptide-matrix adducts is described. Some commonly used matrices in MALDI mass spectrometry were found to specifically react with sulfhydryl groups within peptide, thus allowing the observation of the peptide-matrix adduct ion [M+n+n′ matrix+H]⁺ or [M+n+n′ matrix+Na]⁺ (n = the number of cysteine residues, n′=1, 2,…, n) in MALDI mass spectra after chemical reduction of disulfide-linked peptides. Among several matrices tested, α-cyano-4-hydroxycinnamic acid (CHCA, molecular mass 189 Da) and α-cyano-3-hydroxycinnamic acid (3-HCCA) were found to be more effective for MALDI analysis of disulfide-containing peptides/proteins. Two reduced cysteines involved in a disulfide bridge resulted in a mass shift of 189 Da per cysteine, so the number of disulfide bonds could then be determined, while for the other matrices (sinapinic acid, ferulic acid, and caffeic acid), a similar addition reaction could not occur unless the reaction was carried out under alkaline conditions. The underlying mechanism of the reaction of the matrix addition at sulfhydryl groups is proposed, and several factors that might affect the formation of the peptide-matrix adducts were investigated. In general, this method is fast, effective, and robust to identify disulfide bonds in proteins/peptides.     

Synthesis and characterization of side-chain liquid crystalline polymer containing dichroic dye monomer

A series of side-chain liquid crystalline polysiloxanes containing 1-(p-toluidino)-4-anthraquinone undecylenate (TAU) (dye-monomer) and 4-allyloxybenzoyl-4^′-(p-propyl-benzoyl)-p-benzenediol bisate (ABB) (liquid crystalline monomer) side groups were synthesized by copolymeraztion. The molecular structures of the monomers and polymers were confirmed by FT-IR spectroscopy. The optical characterization of the monomer ABB and polymers was made by using polarizing optical microscopy (POM) technique, and their thermal behaviour was investigated by thermogravimetric analyses (TGA) and differential scanning calorimetry (DSC). The conjugate action of the dye (1-(p-toluidino)-4-hydroxyl anthraquinone) and the monomer was analyzed by fluorophotometry. Polymers and monomer ABB revealed nematic phase. And DSC results demonstrated that the glass transition temperatures (T_g) of the polymers increased with the increase in dye-monomer. TGA result showed that the temperatures at which 5% mass loss occurred () for all the polymers were above 270 °C.     

Effect of chiral isosorbide groups on mesomorphic properties of side-chain liquid-crystalline polysiloxanes

Chiral side-chain liquid-crystalline (LC) polysiloxanes containing isosorbide groups were graft copolymerised with poly(methylhydrogeno)siloxane, a chiral LC monomer 6-(4-methoxy-benzoyloxy)-hexahydro-furo[3,2-b]furan-3-yl 4'-(4-undec-10-enoyloxy-benzoyloxy)-biphenyl-4-yl adipate and a nematic LC monomer 4'-(4-methoxy-benzoyloxy)-biphenyl-4-yl 4-(2-undec-10-enoyloxy-ethoxy)-benzoate. The chemical structures and LC properties of the monomers and polymers were characterised by use of various experimental techniques including Fourier transform infrared spectroscopy (FTIR), ¹H-nuclear magnetic resonance (NMR), element analyses (EA), differential scanning calorimetry (DSC), polarised optical microscopy (POM) and X-ray diffraction (XRD). All the chiral LC polymers showed LC properties with very wide mesophase temperature ranges and the chiral component in the LC polymer systems lead to the appearance of a cholesteric phase. The polymers bearing most chiral LC monomer component showed smectic phases by reason of regular structures in the polymer systems. With the increase of another nematic LC monomer in the polymers, the regular polymer structures were destroyed because of different chemical structures between the two kinds of LC monomers, leading to the disappearance of the smectic arrangement.     

Design and synthesis of novel organosoluble chiral poly(amide-ether-imide-urea) containing l-leucine moieties in the main chain

N,N′-(pyromellitoyl)-bis{N-[4(4-aminophenoxy)phenyl]-2-(4-methyl)p-entanamide} (5), as a novel chiral diamine, is synthesized through dehydration of l-leucine and pyromellitic dianhydride followed by the treating with thionyl chloride and subsequent reaction with 4,4′-diamino diphenylether in dry tetrahydrofuran. Several novel optically active poly(amide-ether-imide-urea)s (PAEIUs) with inherent viscosities of 0.37–0.46 dL g⁻¹ are synthesized via the polymerization of compound 5 with various diisocyanates under different catalytic conditions. The obtained PAEIUs are characterized by means of FT-IR, ¹H-NMR, elemental analysis, and specific rotation measurement techniques. The new polymers are readily soluble in polar organic solvents such as N,N-dimethyacetamide, N,N-dimethyformamide, and dimethyl sulfoxide, while the evaluation of their thermal stability by thermogravimetric analysis and differential scanning calorimetry confirmed their moderate to good thermal stability. Compared with our previous work, here, we have different functional groups in the main chain which provide novel polymers with much better solubility while maintaining reasonable thermal properties.     

Effect of terminal perfluorocarbon chain containing mesogens on phase behaviors of chiral comb-like liquid crystalline polymers

A novel perfluorinated liquid crystal 4′-(2,2,3,3,4,4,5,5,6,6,7,7,8,8,8-pentadecafluorooctanoyloxy)biphenyl-4-yl undec-10-enoate (PFOBU) was synthesized, which exhibited smectic C phase. Several liquid crystalline polymers (PI–PVI) were synthesized by use of poly(methylhydrogeno)siloxane, PFOBU, and cholesteryl 3-(4-allyloxy-phenyl)-acryloate. The chemical structures and liquid crystalline (LC) properties of the monomers and polymers, and some ferroelectric properties of the chiral smectic C (S_C^*) phase were characterized by use of various experimental techniques. The effect of perfluorocarbon chains on phase behaviors of the fluorinated LC polysiloxanes was studied as well. PI and PII showed single chiral nematic (N^*) mesophase when they were heated and cooled, but PIII, PIV, PV, and PVI containing more perfluorocarbon chain units exhibited S_C^* phase besides N^* mesophase. Introduction of perfluorocarbon chain containing mesogens to the chiral cholesteryl-containing polymer systems resulted in a S_C^* mesophases, indicating that the fluorophobic effect could lead to microphase segregation and modifications of smectic mesophases from the chiral nematic phase.     

Liquid crystalline behavior and fluorescent property of calix[4]arene containing azobenzene photochromic group

The reaction of 4′-hydroxy-4-methyl azobenzene (1) and 1,6-dibromohexane afforded 6-bromo-1-((4-((4-met hylphenyl)azo)phenyl)oxy)hexane (2), which further reacted with p-tert-butylcalix[4]arene to give the calix[4]arene derivative (3) whose lower rim had been modified by the azobenzene photochromic group. The structure of 3 was characterized by ¹H-nuclear magnetic resonance (NMR) and electrospray ionization-mass spectrometry (ESI-MS). The fluorescence intensity of compound 3 was two to four times higher than that of compounds 1 and 2 as the azobenzene group concentration in the range of 1.6 × 10⁻⁵ to 8.0 × 10⁻⁴ mol/L, indicating that the fluorescence quantum yield of the azobenzene group had been improved through being attached to the calix[4]arene skeleton. The liquid crystalline behavior of compound 3 was studied by polarized microscopy (POM) and differential scan calorimeter (DSC). Compound 3 exhibited the enchased texture of a smectic liquid crystal from 209.4°C to 219.5°C on heating, while 2 exhibited a liquid crystalline phase from 87.4 to 83.2°C on cooling. It was found that the calix[4]arene skeleton was a good platform for conformation immobilization of azobenzene photochromic group and the formation of liquid crystalline. Translated from Chinese Journal of Applied Chemistry, 2006, 23(9): 1023–1026 [译自: 应用化学]     

Synthesis and structure of 4′,4′-dimethyl[16α,17α]spiropentanopregn-4-ene-3,20-dione

4′,4′-Dimethyl[16α,17α]spiropentanopregn-4-ene-3,20-dione was synthesized. The addition of diazo-2,2-dimethylcyclopropane generated from N-(2,2-dimethylcyclopropyl)-N-nitrosourea to 16,17-didehydropregnenolone acetate occurs regio-and stereospecifically to give 3β-acetoxy-1′,1′-dimethyl-20-oxopregn-5-ene-[16α,17α;7′,6′]-4′, 5′-diazaspiro[2.4]-hept-4′-ene in high yield. Its thermolysis affords a spiropentane-containing steroid, which is transformed into the target diketone. The anti position of the gem-dimethyl group in the fused spiropentane fragment is evident from the X-ray diffraction study of the final product. Dedicated to Academician O. M. Nefedov on the occasion of his 75th birthday. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 2040–2042, November, 2006.     

Linearly polarized white fluorescence from shish-kebab type liquid crystalline poly(P-phenylenevinvlene)s with (P-phenylene)s as kebab

Liquid crystalline(LC) polymers with a shish-kebab-type moiety on their cross-conjugated(p-phenylene)s-poly(p-phenylenevinylene) s main chains were synthesized through Gilch polymerization in order to develop a kind of polymers available for linearly polarized white-light-emitting from single chain.In this system,the 2,5-bis(4’-alkoxyphenyl)benzene as the "kebabs" connects with poly(p-phenylenevinylene)(PPV) main chain backbone using its molecular gravity center and the PPV as the "shish" or "skewer"(the "shish-kebab").The polymers possess desirable properties such as excellent solubility and liquid crystalline properties.To drop the "kebabs" of the 2,5-bis(4’-alkoxyphenyl)benzene into the orientation microgroove of aligned polyimide film,not only the "shish" of polymer main chain can be aligned by the virtue of orientation of "kebabs" but also the uniform cross-conjugated structure between the "kebabs" and "shish" can be broken. Then,the alignment of the polymer main chain showed yellow light emission and was also accompanied by orientation of the LC side chains showing blue light emission,this gave rise to a notable linearly polarized white fluorescence.     

Studies on polymers from cyclic dienes. XII. Cationic polymerization of spiro[2,4]hepta-4,6-diene

Polymerizations of spiro[2,4]hepta-4,6-diene were carried out with cationic initiators and Ziegler-type catalysts. This monomer polymerized very rapidly with a variety of cationic initiators, and low monomer and initiator concentrations had to be employed in order to avoid formation of crosslinked polymers. The polymer contained 1,2 and 1,4 addition units, and there was no indication of the opening of the cyclopropyl ring in the monomer unit. The following relationship was obtained: [η] = 4.5 × 10^?8M?_n^1.71. The exponential coefficient of this equation is much greater than those typical of vinyl polymers, suggesting that the polymer chain is very stiff. The polymer showed much enhanced resistance to autoxidation as compared with polycyclopentadiene, and its softening point was above 200°C. These interesting physical and chemical properties of the monomer and the polymer can be associated with their spiro structures.     

Synthesis and characterization of molecularly imprinted polymers for recognition of ciprofloxacin

A molecularly imprinted polymer (MIP), with special molecule recognition properties of ciprofloxacin (CIP), was prepared by thermal polymerization in which ciprofloxacin acted as template molecule, α-methacrylic acid (MAA) acted as functional monomer and trimethylolpropane trimethylacrylate (TRIM) acted as crosslinker. The optimized ratio was determined to be n(CIP): n (MMA):n(TRIM)51:6:16 by investigation of the effects of different concentrations of functional monomer and the crosslinker on the MIP’s recognition properties. Equilibrium binding experiment was used to investigate the adsorption dynamics, the binding ability to template molecule and the substrate selectivity. Scatchard analysis was used to study the MIP’s binding characteristic to template molecule. The results indicated that MIP has higher adsorption ability and selectivity. The equilibrium distribution coefficient K _D was 41.64 and the separation factor α was 1.62. Scatchard analysis showed that two different kinds of binding sites were produced in the polymer matrix and their dissociation constants were calculated to be K _d1 = 5.249 × 10⁻⁵ mol·L⁻¹, K _d2 = 2.237 × 10⁻³ mol·L⁻¹. __________ Translated from Chemistry, 2008, 71(2): 132–137     

Synthesis,spectroscopic and thermal properties of Pt(II) complexes of some polydentate ligands

The new tetradentate symmetrical (2R,2′S)-1,1′-piperazine-1,4-diyldipropane-2-thiol) (L¹), (2S)-1-[bis(2-aminoethyl)amino]propan-2-ol) (L²), and 2-{(E)-[((1R,2S)-2-{[(1Z)-(2-hydroxy phenyl)methylene]amino}cyclohexyl)imino]methyl}phenol (L³) ligands were synthesized and characterized on the basis of FT-IR, ¹H, ¹³C NMR, EI mass, and elemental analysis. Three commercially available ligands, (2,2′-[ethane-1,2-diylbis(thio)]diethanol (L⁴), 2,2′-dithiodiethanenamine (L⁵), and (2,2′-[ethane-1,2-diyldi(imino)] diethanol (L⁶), were also studied. Pt(II) complexes were characterized by FTIR, elemental analysis and thermal methods. Thermal behaviors of these complexes were investigated in the range 10–1000 °C. Magnetic properties were also studied, and the all complexes were found to be diamagnetic. The structures consist of the monomeric units in which the Pt(II) atoms exhibit square planar geometry. N,N′-bis(salicylidene)-1,2-cyclohexane has been synthesized and characterized by X-ray single crystal diffraction measurement. The ligand crystallizes in monoclinic crystal system and space group, Cc.     

Crystal Structure of infin; 2[Cu2I2(μ-4-4′-bipyridine)] and Investigations on the Thermal Decomposition of CuX-4,4′-bipyridine Coordination Polymers

Summary.  The inorganic-organic coordination polymer _infin; ²[Cu₂I₂(μ-4-4′-bipyridine)] was prepared by the reaction of Cu(I)I and 4,4^′-bipyridine in acetonitrile. Its structure consists of staircase-like CuX double chains which are connected to sheets by the 4,4^′-bipyridine ligands. The thermal decomposition of the corresponding 1:1 copper(I) halide-4,4^′-bipyridine compounds _infin; ²[CuX(μ-4-4′-bipyridine)] (X = Cl, Br, I) was investigated using simultaneous difference thermal analysis and thermogravimetry (DTA-TG), thermomicroscopy, and temperature resolved X-ray powder diffraction in air or argon. Upon heating _infin; ²[CuX(μ-4-4′-bipyridine)], several changes in sample mass are observed which correspond to a stepwise loss of the organic ligands. Temperature-resolved X-ray powder diffraction proves that _infin; ²[CuX(μ-4-4′-bipyridine)] transforms to _infin; ²[Cu₂ X ₂(μ-4-4′-bipyridine)] during the decomposition; the latter looses the remaining ligands when heated further, forming the corresponding copper(I)halides. When the experiments were performed under an argon atmosphere, the 2:1 coordination polymers were obtained as phase-pure compounds. Received March 1, 2001. Accepted April 11, 2001     

Synthesis and characterization of side-chain cholesteric elastomers derived from an isosorbide crosslinking agent

New liquid crystalline monomer 4-(4-ethoxybenzoyloxy)biphenyl-4′-[(10-undecylen-1-yloxy)-4′-ethoxy]benzoate (M ₁ ), chiral crosslinking agent isosorbide di-(10-undecylen-1-yloxybenzoate) (M ₂ ), and the corresponding elastomers were prepared. The chemical structures of M ₁ and M ₂ were characterized by Fourier transform infrared and ¹H-nuclear magnetic resonance. The mesomorphic properties and phase behavior were investigated by differential scanning calorimetry, thermogravimetric analysis, polarizing optical microscopy, and X-ray diffraction measurements. M ₁ exhibited typical threaded texture and droplet texture of nematic phase. The use of chiral crosslinking agent in the polymer networks could induce cholesteric phase. The elastomers containing less than 10 mol% of the chiral crosslinking units showed elasticity, reversible phase transition, wide mesophase temperature ranges, and high thermal stability. For the elastomers P ₂ –P ₄ , the glass transition temperature (T _g) increased; clearing temperature (T _i) and mesophase temperature range (ΔT) decreased with increasing content of the crosslinking unit.     

Effect of fluorinated nematic mesogens on phase behaviors and optical properties of chiral liquid crystalline polysiloxanes

A series of new chiral side-chain liquid crystalline polymers (P₁–P₇) have been synthesized with poly(methylhydrogeno)siloxane, two chiral liquid crystalline monomers, cholesteryl-4-allyloxybenzoate (M₁) and cholesteryl 4-(10-undecylen-1-yloxy) benzoate (M₂), and a nematic liquid crystalline monomer, 4-(trifluoromethyl)phenyl 4-(undec-10-enoyloxy)benzoate (M₃). The chemical structures and liquid crystalline properties of the synthesized polymers have been investigated by FTIR, ¹H-NMR, differential scanning calorimetry (DSC), polarizing optical microscopy (POM), thermogravimetric analysis (TGA), and X-ray diffraction (XRD). All chiral polymers show wide mesophase temperature ranges and a high thermal stability with decomposition temperatures (T _d) at 5 % weight loss greater than 300 °C. P₁–P₄ display a single cholesteric phase, but P₅–P₇ containing more fluorinated units show a smectic A (SA) phase besides a cholesteric phase. The optical properties of the polymers have been characterized by circular polarization spectra and optical rotation analysis. The cholesteric polymers P₃ and P₄ exhibit different colors at room temperature, and the color can remain over 24 months. The maximum reflection bands of polymers P₁–P₄ shift to long wavelength with increasing the content of M₃ in the polymer systems. For P₅–P₇, the reflection wavelengths change sharply around the temperature of the SA–Ch phase transition. The specific rotation value of P₂ smoothly decreases from ?8.2° to ?0.29° when it is heated, but the specific rotation value of polymer P₇ changes from negative value to positive value on heating cycle. The optical properties of the polymers offer tremendous potential for various optical applications.