Magnetic ordering and instability investigation of multiferroic Pb(Fe2/3W1/3)O3 ceramics by microwave dielectric spectroscopy

The microwave dielectric and magnetic properties of Pb(Fe_2/3W_1/3)O₃ multiferroic ceramics were investigated. A dielectric dispersion occurring in the frequency range 100 MHz-3 GHz and in a broad temperature range showed itself to be a powerful tool to detect magnetostrictive effects. The experimental results revealed the following remarkable features: the temperature dependence of f_R (characteristic frequency) and the dielectric strength Δε (characteristic of the dispersion) enabled us to identify not only the para-ferroelectric (T_C≈180 K) but also the para-antiferromagnetic (T_N≈340 K) phase transitions, while magnetic measurements revealed the para-antiferromagnetic ordering and a weak superexchange interaction (T_N2∼15 K). Additionally, both characterizations confirmed the existence of structural or magnetic instabilities around 250 K.     

The electronic structure and magnetic properties of metallic antiferromagnetic Co[(CH3PO3)(H2O)] studied by first-principles calculations

The electronic structure, the metallic and magnetic properties of metal phosphonate Co[(CH₃PO₃)(H₂O)] have been studied by first-principles calculations, which were based on the density-functional theory (DFT) and the full potential linearized augmented plane wave (FPLAPW) method. The total energy, the spin magnetic moments and the density of the states (DOS) were all calculated. The calculations reveal that the compound Co[(CH₃PO₃)(H₂O)] has a stable metallic antiferromagnetic (AFM) ground state and a half-metallic ferromagnetic (FM) metastable state. Based on the spin distribution obtained from calculations, it is found that the spin magnetic moment of the compound is mainly from the Co²⁺, with some small contributions from the oxygen, carbon and phosphorus atoms, and the spin magnetic moment per molecule is 5.000μ_B, which is in good agreement with the experimental results.     

High spin polarization in ordered Cr3Co with the DO3 structure: A first-principles study

The electronic structure of the highly ordered alloy Cr₃Co with the DO₃ structure has been studied by FLAPW calculations. It is found that the ferrimagnetic state is stable and that the equilibrium lattice constant of Cr₃Co equals 5.77 Å. A large peak in majority spin density of states (DOS) and an energy gap in minority spin DOS are observed at the Fermi level, which results in a high spin polarization of 90% in the ordered alloy Cr₃Co. The total magnetic moment of Cr₃Co is 3.12μ_B, which is close to the ideal value of 3μ_B derived from the Slater-Pauling curve. An antiparallel alignment between the moments on the Cr (A, C) sites and the Cr (B) sites is observed. Finally, the effect of lattice distortion on the electronic structure and on magnetic properties of Cr₃Co compound is studied. A spin polarization higher than 80% can be obtained between 5.55 and 5.90 Å. With increasing lattice constant, the magnetic moments on the (A, C) sites increase and the moments on the (B, D) sites decrease. They compensate each other and make the total magnetic moment change only slightly.     

Elasticity and thermodynamic properties of RuB2 under pressure

First-principles calculations of the crystal structure and the elastic properties of RuB₂ have been carried out with the plane-wave pseudopotential density functional theory method. The calculated values are in very good agreement with experimental data as well as with some of the existing model calculations. The elastic constants c_ij, the aggregate elastic moduli (B, G, E), Poisson's ratio, and the elastic anisotropy with pressure have been investigated. Through the quasi-harmonic Debye model considering the phonon effects, the isothermal bulk modulus, the thermal expansions, Grüneisen parameters, and Debye temperatures depending on the temperature and pressure are obtained in the whole pressure range from 0 to 60 GPa and temperature range from 0 to 1100 K as well as compared to available data.     

Electronic structure and transport of Ca3Co2O6 and Ca3CoNiO6

We have calculated the band structure of Ca₃Co₂O₆ and Ca₃CoNiO₆ by using the self-consistent full-potential linearized augmented plane-wave method within density function theory and the generalized gradient approximation for the exchange and correlation potential. The spin-orbit interaction is incorporated in the calculations using a second variational procedure. The relation of these band structure calculations to thermoelectric transport is discussed. The results illustrate that transport is highly anisotropic with much larger mobility in the a-b plane than out of the a-b plane, and the introduction of Ni in Ca₃Co₂O₆ alters its electronic structure and its thermoelectric transport properties.     

Magnetic phase transitions and structures of Co3V 2O8

Co₃V ₂O₈ is a spin- 3/2 system on a Kagomé staircase and is known to undergo two magnetic phase transitions between 6 and 11 K. The H-T phase diagram of Co₃V ₂O₈ derived by magnetization measurements on a single crystal is presented. Additionally both ordered magnetic structures were investigated by neutron powder diffraction experiments and solved using Bertaut’s macroscopic theory. For the ferromagnetic phase the magnetic moments of the Co²⁺ ions were found to be 1.5(3)μ_B and 2.7(1)μ_B at 3.5 K along the crystallographic a axis for the (4a) and (8e) sites, respectively. The antiferromagnetic phase exhibits a magnetic cell with a doubled b axis with respect to the nuclear one. The magnetic moments point along the a axis being 1.8(2)μ_B (4a) and 1.8(1)μ_B (8e) at 8 K.     

Electronic structure and magnetic properties of Gd3Co11B4 compound

The electronic structure of hexagonal Gd₃Co₁₁B₄ compound has been studied by X-ray photoemission spectroscopy (XPS) and ab initio self-consistent tight binding linear muffin tin orbital (TB LMTO) method. We have found a good agreement between the experimental XPS valence band spectra and theoretical LMTO calculations. Results showed that the Gd₃Co₁₁B₄ compound is ferrimagnetic with the calculated total magnetic moment M=14.29 μ_B/f.u. The values of the magnetic moments on Co atoms strongly depend on the local environment. We have also compared the electronic structure and magnetic properties of Gd₃Co₁₁B₄ compound with those of Nd₃Co₁₁B₄ compound.     

Raman spectra of the orthorhombic semiconductor compound Cu2SnTe3

The optical phonon spectrum of the semiconductor Cu₂SnTe₃, that crystallizes in the orthorhombic structure with space group Imm2 (), have been studied by measuring unpolarized Raman scattering between 10 and 300 K. The experimental frequencies of the phonon modes observed were compared to those calculated by using simplified lattice dynamical models reported in the literature. From combined analysis of these results together with the factor group analysis of the zone-center vibrational modes, valuable information about these modes was obtained and their possible symmetry was assigned. A₁ modes at 71, 123, 167, 176 and 190 cm⁻¹; A₂ modes 115 and 131 cm⁻¹; B₁ modes at 76, 142 and 152 cm⁻¹; B₂ modes at 89, 100 and 206 cm⁻¹; a overtone at 246 cm⁻¹, and combinations at 218, 270 and 292 cm⁻¹; have been observed in this compound.     

The role of As2O3 on the stability and some physical properties of PbO-Sb2O3 glasses

PbO-Sb₂O₃ glasses added with different concentrations of As₂O₃ (10-55 mol%) were prepared to understand their IR spectra, elastic properties (Young's modulus E, Shear modulus G, microhardness H), optical absorption and dielectric properties (constant ε, loss tan δ, ac conductivity σ_ac over a moderately wide range of frequency and temperature and breakdown strength in air medium at room temperature). Results have indicated that the structure of the PbO-Sb₂O₃-As₂O₃ glass is more rigid when the concentration of As₂O₃ is around 40 mol%.     

Half-metallic ferromagnetism in I2-VI compounds with non-magnetic dopants

First-principles calculations based on the tight-binding linear muffin-tin orbital (TB-LMTO) method were performed to investigate the occurrence of spin polarization in the alkali metal oxides (M₂O) [M: Li, Na, K, Rb] in antifluorite (anti- CaF₂-type) structure with non-magnetic (N, P, As, Sb and Bi) dopants. The calculations reveal that non-magnetic substitutional doping at anion site can induce stable half-metallic ferromagnetic ground state in I₂-VI compounds. Total energy calculations show that the antifluorite ferromagnetic state is energetically more stable than the antifluorite non-magnetic state at equilibrium volume. Ground state properties such as equilibrium lattice constant and bulk modulus were calculated. The calculated magnetic moment is found to be 1.00 μ_B per dopant atom. The magnetic moment is mainly contributed by p orbitals of dopant atom.     

First-principles investigations of Cr doping effects on electronic structure and magnetic properties in Sr2FeReO6

The electronic structures and magnetic properties of double perovskites Sr₂Fe_1−xCr_xReO₆ (x=0.0, 0.25, 0.5, 0.75, 1.0) have been studied within the local spin density approximation (LSDA) and LSDA+U schemes. The calculated results reveal that with increasing Cr content the cell volume shrinks 2.61%; the Fe/Cr site magnetic moment decreases while the Re-site moment increases. The total spin magnetic moment linearly decreases with the Cr doping from 3.00μB for x=0.00 down to 1.00μB for x=1.00 per formula unit. The magnetic coupling constants increase with increasing x. The electronic structure calculations indicate that the electronic concentration in the Re spin-down subband slightly increases resulting from the increase of bonding-antibonding interaction between the localised and the delocalised states in spin-down band; the coupling of O-2p_↑ and transition-metal-3d_↑ is substantially enhanced with the Cr doping. We discuss the origin of the anomalously high TC of Cr-doped Sr₂FeReO₆ compounds in terms of band hybridization effects.     

Mechanical properties of superhard diamondlike BC5

Using first-principles calculations, we systematically studied the mechanical properties and electronic structure of the recently synthesized diamondlike BC₅. Our calculated bulk modulus B, shear modulus G, elastic constant c₄₄, and theoretical hardness H confirm that BC₅ is an ultraincompressible and superhard material. Also, it exhibits mechanical stability and metallic features. Electronic structures show that a strong covalent bond network through sp³ hybridization is the origin of the excellent mechanical properties of BC₅. Our results show that BC₅ has good prospects in electronic application as a superhard material.     

First-principles calculations of structural and thermodynamic properties of Y 3Al5O12

The pseudo-potential plane-wave method using the generalized gradient approximation (GGA) within the framework of the density functional theory is applied to study the structural and thermodynamic properties of Y ₃Al₅O₁₂. The lattice constants and bulk modulus are calculated. They keep in good agreement with other theoretical data and experimental results. The quasi-harmonic Debye model, in which the phononic effects are considered, is applied to the study of the thermodynamic properties. The temperature effect on the structural parameters, bulk modulus, thermal expansion coefficient, specific heats and Debye temperatures in the whole range from 0 to 20 GPa and temperature range from 0 to 1500 K.     

Elastic, electronic, and optical properties of hypothetical SnNNi3 and CuNNi3 in comparison with superconducting ZnNNi3

The elastic, electronic, and optical properties of MNNi₃ (M=Zn, Sn, and Cu) have been calculated using the plane-wave ultrasoft pseudopotential technique, which is based on the first-principle density functional theory (DFT) with generalized gradient approximation (GGA). The optimized lattice parameters, independent elastic constants (C₁₁, C₁₂, and C₄₄), bulk modulus B, compressibility K, shear modulus G, and Poisson's ratio υ, as well as the band structures, total and atom projected densities of states and finally the optical properties of MNNi₃ have been evaluated and discussed. The electronic band structures of the two hypothetical compounds show metallic behavior just like the superconducting ZnNNi₃. Using band structures, the origin of features that appear in different optical properties of all the three compounds has been discussed. The large reflectivity of the predicted compounds in the low energy region might be useful in good candidate materials for coating to avoid solar heating.     

Spintronic properties of the Ti2CoB Heusler compound by density functional theory

The electronic structure and magnetic properties of the Ti₂CoB Heusler compound with a high-ordered CuHg₂Ti structure were investigated using the self-consistent full potential linearized augmented plane wave (FPLAPW) method within the density functional theory (DFT). Spin-polarized calculations show that the Ti₂CoB compound is half-metallic ferromagnetic with a magnetic moment of 2 μ_B at the equilibrium lattice constant, a=5.74 Å. The Ti₂CoB Heusler compound is ferromagnetic below the equilibrium lattice constant and ferrimagnetic above the equilibrium lattice constant. A large peak in majority-spin DOS and an energy gap in minority-spin DOS are observed at the Fermi level, yielding a spin polarization of 100%. A spin polarization higher than 90% is achieved for a wide range of lattice constants between 5.6 and 6.0 Å.     

High-pressure Raman spectroscopic studies on orthophosphates Ba3(PO4)2 and Sr3(PO4)2

By using diamond anvil cell (DAC), high-pressure Raman spectroscopic studies of orthophosphates Ba₃(PO₄)₂ and Sr₃(PO₄)₂ were carried out up to 30.7 and 30.1 GPa, respectively. No pressure-induced phase transition was found in the studies. A methanol:ethanol:water (16:3:1) mixture was used as pressure medium in DAC, which is expected to exhibit nearly hydrostatic behavior up to about 14.4 GPa at room temperature. The behaviors of the phosphate modes in Ba₃(PO₄)₂ and Sr₃(PO₄)₂ below 14.4 GPa were quantitatively analyzed. The Raman shift of all modes increased linearly and continuously with pressure in Ba₃(PO₄)₂ and Sr₃(PO₄)₂. The pressure coefficients of the phosphate modes in Ba₃(PO₄)₂ range from 2.8179 to 3.4186 cm⁻¹ GPa⁻¹ for ν₃, 2.9609 cm⁻¹ GPa⁻¹ for ν₁, from 0.9855 to 1.8085 cm⁻¹ GPa⁻¹ for ν₄, and 1.4330 cm⁻¹ GPa⁻¹ for ν₂, and the pressure coefficients of the phosphate modes in Sr₃(PO₄)₂ range from 3.4247 to 4.3765 cm⁻¹ GPa⁻¹ for ν₃, 3.7808 cm⁻¹ GPa⁻¹ for ν₁, from 1.1005 to 1.9244 cm⁻¹ GPa⁻¹ for ν₄, and 1.5647 cm⁻¹ GPa⁻¹ for ν₂.     

First-principles calculations of structural, elastic, electronic and optical properties of the antiperovskite AsNMg3

The density functional theory (DFT) calculations of structural, elastic, electronic and optical properties of the cubic antiperovskite AsNMg₃ has been reported using the pseudo-potential plane wave method (PP-PW) within the generalized gradient approximation (GGA). The equilibrium lattice, bulk modulus and its pressure derivative have been determined. The elastic constants and their pressure dependence are calculated using the static finite strain technique. We derived the bulk and shear moduli, Young's modulus and Poisson's ratio for ideal polycrystalline AsNMg₃ aggregate. We estimated the Debye temperature of AsNMg₃ from the average sound velocity. This is the first quantitative theoretical prediction of the elastic properties of AsNMg₃ compound, and it still awaits experimental confirmation. Band structure, density of states and pressure coefficients of energy gaps are also given. The fundamental band gap (Γ-Γ) initially increases up to 4 GPa and then decreases as a function of pressure. Furthermore, the dielectric function, optical reflectivity, refractive index, extinction coefficient, and electron energy loss are calculated for radiation up to 30 eV. The all results are compared with the available theoretical and experimental data.     

Electrical and magnetic properties of non-stoichiometric (La0.8Sr0.2)1−xMnO3 perovskites

The structure, transport and magnetic properties of (La_0.8Sr_0.2)_1−xMnO₃ (0≤x≤0.30) polycrystalline perovskite manganites have been investigated. For all the samples the Curie temperatures, T_c, remain nearly unchanged (329±3 K). Resistivity versus temperature curves for the samples show a double-peak behavior. A significant magnetoresistance (MR) effect and different temperature dependences of the MR ratios of the samples are observed. The shapes of the MR-T curves of the samples can be adjusted by changing x. For the x=0.30 sample, a nearly constant MR ratio of (9.5±0.5)% is obtained over the temperature range from 205 to 328 K.     

The effect of B2O3 addition to the microstructure and magnetic properties of Ni0.4Zn0.6Fe2O4 ferrite

The effects of 0.01 and 0.1 mol B₂O₃ addition to the microstructure and magnetic properties of a Ni–Zn ferrite composition expressed by a molecular formula of Ni_0.4Zn_0.6Fe₂O₄ were investigated. The toroid-shaped samples prepared by pressing the milled raw materials used in the preparation of the composition were sintered in the range of 1000–1300 °C. The addition of 0.01 mol B₂O₃ increased the grain growth and densification giving rise to reduced intergranular and intragranular porosity due to liquid-phase sintering. The sintered toroid sample at 1300 °C gave the optimum magnetic properties of B_r=170 mT, H_c=0.025 kA/m and a high initial permeability value of μ_i=4000. The increment of the B₂O₃ content to 0.1 mol resulted in a pronounced grain growth and also gave rise to large porosity due to the evaporation of B₂O₃ at higher sintering temperatures. Hence, it resulted in an air-gap effect in the hysteresis curves of these samples.     

Crystal structure, electronic and transport properties of AgSbSe2 and AgSbTe2

Undoped and p- and n-doped AgSbX₂ (X=Se and Te) materials were synthesized by direct fusion technique. The structural properties were investigated by X-ray diffraction and SEM microscopy. The electrical conductivity, thermal conductivity and Seebeck coefficient have been measured as a function of temperature in the range from 300 to 600 K.To enlighten electron transport behaviours observed in AgSbSe₂ and AgSbTe₂ compounds, electronic structure calculations have been performed by the Korringa-Kohn-Rostoker method as well as KKR with coherent potential approximation (KKR-CPA) for ordered (hypothetical AgX and SbX as well as AgSbX₂ approximates) and disordered systems (Ag_1−xSb_xX), respectively. The calculated density of states in the considered structural cases shows apparent tendencies to opening the energy gap near the Fermi level for the stoichiometric AgSbX₂ compositions, but a small overlap between valence and conduction bands is still present. Such electronic structure behaviour well agrees with the semimetallic properties of the analyzed samples.