The state and adsorption behaviour of traces of cadmium in aqueous solutions

The state of trace cadmium in aqueous nitrate solutions has been analysed by dialysis, centrifugation and electromigration. It has been found that Cd²⁺ ions prevail in solutions of pH <5, whereas colloidal forms are present at higher pH, together with the ionic or molecular products of cadmium hydrolysis. The nature and abundance of the colloids depends on the concentration of cadmium. Mostly pseudocolloids are formed in ≤5 × 10⁻⁷ M solutions due to adsorption of Cd(OH)₂ and CdOH⁺ on foreign colloidal impurities. At 5 × 10⁻⁶ M polymerisation of the hydrolytic products probably takes place with formation of colloidal cadmium hydroxide or basic salts. Adsorption of traces of cadmium has been studied on glass and plexiglass as a function of pH, age and composition of the solution and concentration of cadmium. Probable mechanisms of adsorption have been proposed.     

Solution Characteristics for Adsorption of Copper Ion with Iron(III) Hydroxide from Aqueous Ammonia Solution

The distribution of copper ion species in aqueous ammonia solution is evaluated as a function of pH by a numerical approach. Adsorption of copper on colloidal iron(III) hydroxide in solutions of total ammonia (0.14-1.2 M) are performed at various values of pH. The maximum efficiency of adsorption occurs when the sum of the fractions of the species Cu(NH₃)²⁺, Cu(NH₃)₂²⁺ and Cu(NH₃)₃²⁺ in the solution reaches its maximum. With varied solution pH, the distribution of copper species is the determining factor for maximum adsorption, whereas the surface properties of the adsorbing particles show smaller effects under the test conditions.     

Influence of solution pH on stability of aluminum oxide suspension in presence of polyacrylic acid

The effect of solution pH and molecular weight of polyacrylic acid (PAA) on its adsorption as well as on stabilization-floculation properties of the colloidal Al₂O₃ and electrolyte solution systems was studied. The measurements showed that at pH = 6, the presence of the polymer of molecular weight 2?000 and 240?000 does not change stability of Al₂O₃ suspension. However at pH =3 and 9 the effect of polyacrylic acid is significant. At pH = 3 it creates destabilization of the suspension while at pH = 9 PAA it improves significantly the stability of Al₂O₃. It was shown that the increase in solution pH affects conformation of adsorbed macromolecules which causes the decrease in PAA adsorbed amount and thickness of polymer adsorption layer. By comparing the values of diffusion layer and surface charges, main effects responsible for the decrease in surface charge and ζ potential of the solid in the presence of the polymer as well as suspension stability were determined.     

Humic Acid Removal by Combining the Magnetic Property of Maghemite with the Adsorption Property of Nanosized Hydroxyapatite

Maghemite incorporated hydroxyapatite (HAP) nanocomposite was prepared by in situ precipitation of the calcium phosphate phase in an iron oxide colloidal suspension. The resultant nanocomposite was characterized by x-ray diffraction, Fourier transform infrared spectrometer, transmission electron microscope, N₂ adsorption analysis, and vibrating sample magnetometry. The potential of HAP/γ-Fe₂O₃ nanocomposite for HA adsorption from aqueous solution was evaluated by batch experiments and adsorption kinetic tests. HA adsorption amount on the adsorbent decreased with increasing solution pH and the presence of KNO₃ and alkali-earth metal ions resulted in enhanced HA adsorption. HA adsorption onto HAP/γ-Fe₂O₃ nanocomposite could be well described by Freundlich and Sips models, while HA adsorption process on the adsorbent obeyed pseudo-second-order kinetics and the adsorption rates decreased with increasing initial HA concentration. This study showed that the HAP/γ-Fe₂O₃ nanocomposite could be used as an efficient and magnetically separable adsorbent for the removal of HA from aqueous solution. Subsequent studies demonstrated that the HA-loaded HAP/γ-Fe₂O₃ nanocomposite could be further applied for the highly efficient adsorption of methylene blue (MB) and separated from the medium by a simple magnetic process.     

Catalytic activity of silver colloids on polarographic reduction of oxygen

The catalytic electroreduction of O₂ at DME in the presence of colloidal silver has been studied. Two colloids, characterized by different catalytic activity, have been prepared and tested. The influence of the height of the mercury head, pH, and temperature on both the first and the second wave of the polarographic reduction of O₂ have been investigated. A mechanism, which takes into account the possible adsorption of OH^? ions on the silver catalyst, is proposed for the H₂O₂ decomposition: the experimental points fit the calculated curve of log k_s vs. pH well. Thermodynamic parameters are also derived.     

Adsorption of codeine on hydrophilic silica and silica surface modified by hydrophobic groups in the presence of electrolytes

The adsorption of codeine from aqueous solution onto colloidal silica and silica surface-modified with chemiadsorbed octadecyl dimethyl silane (ODDMS) or dimethyl silane (DMS) groups was studied in the presence of neutral electrolytes at different pH values. From codeine-hydrochloride solutions codeine cations are strongly bound to negatively charged silica surfaces. Inorganic salts (NaCl, NaNO₃) reduce the adsorption of the organic cation. On silica modified by ODDMS (10% of surface silanol groups are occupied), codeine cations are adsorbed to a higher extent at pH 6, while at pH 8 the adsorbed amounts are lower than on the bare silica surface. Neutral electrolytes reduce codeine adsorption on the ODDMS modified silica. On the hydrophobic silica, completely covered by DMS groups, codeine adsorption is considerably lower than on the bare silica, but neutral salts increase the adsorption. The adsorption of codeine is compared with the adsorption of aggregating surfactant ions. Common and different features of their interactions with silica surfaces are outlined.     

Purification and Characterization of Thermostable Chitinase from <Emphasis Type="Italic">Bacillus licheniformis</Emphasis> SK-1

Chitinase was purified from the culture medium of Bacillus licheniformis SK-1 by colloidal chitin affinity adsorption followed by diethylamino ethanol-cellulose column chromatography. The purified enzyme showed a single band on sodium dodecyl sulfate polyacrylamide gel electrophoresis. The molecular size and pI of chitinase 72 (Chi72) were 72 kDa and 4.62 (Chi72) kDa, respectively. The purified chitinase revealed two activity optima at pH 6 and 8 when colloidal chitin was used as substrate. The enzyme exhibited activity in broad temperature range, from 40 to 70°C, with optimum at 55°C. It was stable for 2 h at temperatures below 60°C and stable over a broad pH range of 4.0–9.0 for 24 h. The apparent K _m and V _max of Chi72 for colloidal chitin were 0.23 mg ml⁻¹ and 7.03 U/mg, respectively. The chitinase activity was high on colloidal chitin, regenerated chitin, partially N-acetylated chitin, and chitosan. N-bromosuccinamide completely inhibited the enzyme activity. This enzyme should be a good candidate for applications in the recycling of chitin waste.     

The electrical double layer on oxides: Specific adsorption of chloride and methylviologen on ruthenium dioxide

The double-layer properties of colloidal RuO₂, prepared by thermal decomposition of RuCl₃ at 420°C, have been studied by potentiometric acid-base titrations in combination with electrophoretic mobility measurements. The point of zero charge (pzc) in KNO₃ solutions was found to be pH 5.75 ± 0.05, and the isoelectric point (iep) is positioned at pH 5.8. From the total capacitance of the double layer at the pzc an electrochemical surface area of 21.5 m²/g has been found, which is equal to the BET surface area. The capacitance of the inner part of the double layer (C_i) is 300 μF/cm², which is high compared to C_i on AgI and Hg, but of the same order as that commonly found for oxides. This subject is briefly discussed. The surface charge (σ₀) as a function of pH could be fitted satisfactorily with a simple double-layer model. In the presence of KCl the pzc and the iep are shifted to higher and lower pH, respectively, indicating specific adsorption of Cl⁻ ions. The ionic composition of the double layer as a function of σ₀ and the specific adsorption of Cl⁻ at the pzc have been calculated by a straightforward thermodynamic analysis combined with diffuse double-layer theory. Methylviologen (MV²⁺) also adsorbs specifically and at negative surface charges superequivalent adsorption can take place. In the presence of an excess of KNO₃, specific adsorption of MV²⁺ is no longer noticeable. Some consequences for the catalytic reduction of water by RuO₂ in the presence of MV²⁺ are considered.     

Removing Polyvinylpyrrolidone from Catalytic Pt Nanoparticles without Modification of Superficial Order

Herein, we report a simple methodology for cleaning Pt nanoparticles, prepared by a colloidal synthesis and coated with polyvinylpyrrolidone, without loss of crystalline surface structure. To prove the removal of the polyvinylpirrolidone from a Pt surface without disturbing the superficial order, a cleaning method using a solution of H₂O₂/H₂SO₄ was tested successfully for a Pt(111) single‐crystal electrode. The decontamination method was then tested for two different types of nanoparticles by mixing the suspension of nanoparticles with H₂O₂/H₂SO₄ and subsequent centrifugation. The resulting voltammetric profiles of platinum particles synthesized by the colloidal method employing PVP show a marked presence of the adsorption‐state characteristic of (111) ordered surface domains. The presence of the well‐ordered domains present on the surface of the nanoparticles was confirmed by using the irreversible adsorption of bismuth, tellurium and germanium.     

电泳法研究改性硅灰石的表面性质

本工作用测定水合金属氧化物等电点的方法,作为评定在硅灰石表面镁的包膜技术,为硅灰石的一物多用提供了新的途径;亦为在硅灰石表面包覆其他金属氧化物找到了一种新的方法。 本工作还研究了影响镁包覆的几种因素,结果表明,在硅灰石表面镁包膜的最佳条件为:pH=10,氢氧化镁溶胶的浓度为0.1mol·1~(-1),平衡时间为1小时,液固质量比为10以上。     

Removal of radiocobalt from aqueous solution by Mg2Al layered double hydroxide

The adsorption behavior of radiocobalt by Mg₂Al layered double hydroxide (Mg₂Al LDH) was studied as a function of contact time, pH, ionic strength, foreign ions, FA and temperature under ambient conditions. The results showed that the kinetic adsorption could be described by a pseudo-second order model very well. The adsorption of Co(II) on Mg₂Al LDH was strongly dependent on pH and ionic strength. The presence of FA enhanced the adsorption of Co(II) on Mg₂Al LDH at low pH, whereas reduced Co(II) adsorption at high pH. The Langmuir model fitted the adsorption isotherms of Co(II) better than the Freundlich and D–R model at three different temperatures of 303, 323 and 343 K. The thermodynamic parameters (ΔH°, ΔS° and ΔG°) calculated from the temperature dependent adsorption isotherms indicated that the adsorption process of Co(II) on Mg₂Al LDH was endothermic and spontaneous. The results show that Mg₂Al LDH is a promising material for the preconcentration and separation of pollutants from large volumes of aqueous solutions.     

Preparation and characterization of microporous SiO2-ZrO2 pillared montmorillonite

SiO₂-ZrO₂ pillared montmorillonite (SZM) was prepared by the reaction of Na-montmorillonite with colloidal silica-zirconia particles which were prepared by depositing zirconium hydroxy cations on silica particles. By pillaring with the colloidal particles, the basal spacing of montmorillonite was expanded to ca. 45 Å and the calcined SZM samples showed large specific surface areas up to 320 m²/g at 400 °C. In spite of large interlayer separation, adsorption results indicated the presence of micropores generated between the colloidal particles. The microporous structure was maintained at least up to 600 °C and exhibited specific shape selectivity for the adsorption of large organic molecules, especially between toluene and mesitylene. According to the temperature-programmed-desorption (TPD) spectra of ammonia, the calcined SZM showed weakly acidic sites.     

Lead ion adsorption from aqueous solutions in modified Algerian montmorillonites

The adsorption of lead (II) ions on three Algerian montmorillonites (sodium, non-sodium, and acidic-activated) was studied. Transmission electron microscopy coupled with energy dispersive X-ray analysis, X-ray fluorescence and physical adsorption of gases were used to characterize the clays. This characterization has shown than the activation with acid increases the surface area as a consequence of the rupture of the laminar structure. The effect of the pH in the lead adsorption capacity was analyzed. The results show that adsorption is strongly depended on the pH. At low pH values, the mechanism that governs the adsorption behavior of clays is the competition of the metal ions with protons. Between pH 2 and 6, the main mechanism is an ion exchange process. The kinetics of the adsorption is tested with respect to pseudo-first-order and second-order models. The adsorption process, gives a better fit with the Langmuir isotherm, being the monolayer capacity ranging between 18.2 and 24.4?mg?g^?1. The adsorption of lead decreased in the order Acidic-M₂?>?M₂?>?M₁. Thermodynamic parameters such as ??H, ??S, and ??G were calculated. The adsorption process was found to be endothermic and spontaneous. The enthalpy change for Pb(II) by M₁ adsorption has been estimated as 60?kJ?mol^?1, indicating that the adsorption of Pb(II) by all montmorillonites used corresponds to a physical reaction. The adsorption capacity of washed Acidic-M₂ was very high compared to M₂ and M₁.     

In situ monitoring of gold-surface adsorption and acidic denaturation of human serum albumin by an isolation-capacitance-adopted electrochemical quartz crystal impedance system

Combined measurements of piezoelectric quartz crystal impedance (PQCI) and electrochemical impedance spectrum (EIS) using a suitable isolation capacitance is reported for the first time to monitor in situ adsorption and acidic denaturation of human serum albumin (HSA) on gold electrodes in Britton-Robinson (B-R) buffers. This method provides simultaneously mutual-interference-free and accurate parameters of EIS and PQCI. Effects of surface thiol-modification, electrode-potential and solution pH on HSA adsorption were examined and discussed. Comparative experiments of HSA adsorption in a B-R buffer of pH 6.42 on bare, cysteine- and 1-dodecanethiol-modified gold electrodes revealed that HSA adsorption is more significant on a hydrophobic (1-dodecanethiol-modified) surface. Insignificant electrode-potential effect implied minor electrostatic effects on HSA adsorption. The adsorption amount of HSA at pH 3.28 was found to be notably greater than those at pH 4.84 and 6.42. To characterize HSA adsorption, electrode standard rate constants (k_s) of the Fe(CN)₆³⁻/Fe(CN)₆⁴⁻ couple were measured before and after HSA adsorption. The k_s-pH curves on an HSA-modified Au electrode revealed that k_s increased abruptly with the decrease of solution pH below pH ∼4. Moreover, pH-dependent responses of the resonant frequency, the motional resistance, the double-layer capacitance, the capacitance of adsorbed HSA layer and the peak absorbance of HSA solutions at 278 nm all exhibited an inflexion change at pH ∼4, and these findings have been explained on the basis of acidic denaturation of HSA and electrical charges carried by HSA molecules.     

刷状结构的阳离子性接枝微粒QPDMAEMA/SiO2对牛血清白蛋白的吸附特性

以微米级硅胶微粒为基质, 通过接枝聚合和大分子反应, 制备了具有刷状结构的阳离子性接枝微粒, 深入研究了其对牛血清白蛋白(BSA)的强吸附能力、吸附机理和吸附热力学. 首先使含叔胺基团的单体甲基丙烯酸二甲基氨基乙酯(DMAEMA)在硅胶微粒表面发生接枝聚合, 制得接枝微粒PDMAEMA/SiO₂, 然后以氯乙胺为试剂, 使接枝大分子PDMAEMA链中的叔胺基团发生季铵化反应, 获得了具有刷状结构的阳离子聚电解质的功能接枝微粒QPDMAEMA/SiO₂. 测定了微粒QPDMAEMA/SiO₂的zeta 电位, 实施了对BSA的等温吸附实验, 考察了介质pH值、离子强度及温度对吸附作用的影响, 研究了吸附热力学. 研究结果表明, 功能接枝微粒QPDMAEMA/SiO₂ 比接枝微粒PDMAEMA/SiO₂ 具有更高的zeta 电位, 在静电相互作用驱动下, 微粒QPDMAEMA/SiO₂对BSA具有很强的吸附能力. 吸附容量随介质pH值的增大呈现先增大后减小的变化趋势,当pH值等于BSA的等电点(pI=4.7)时, 具有最高的吸附容量(高达112 mg·g^-1). 以等电点为界, 离子强度对吸附容量会产生完全相反的影响作用: 当介质pH值小于BSA的等电点时, 电解质浓度增大, 吸附容量增高; 当介质pH值等于BSA的等电点时, 吸附容量几乎不随电解质的浓度发生变化. 吸附过程熵值减小而且放出热量,是一个焓驱动的吸附过程.     

Surface enhanced Raman spectroscopic studies on 1H-1,2,4-triazole adsorbed on silver colloidal nanoparticles

1H-1,2,4-triazole is a very effective corrosion inhibitor for copper. The adsorption of this compound on silver colloidal nanoparticles has been studied by means of surface enhanced Raman scattering (SERS). SERS data are interpreted with the help of DFT calculations of models of the surface complex formed by 1H-1,2,4-triazole on the silver colloidal nanoparticles surface. It was found that this compound is adsorbed on metal surface in its anionic form and that it interacts with silver through the N₁ and N₂ atoms. The molecular plane assumes a tilted orientation with respect to the silver surface.     

Macroscopic and spectroscopic characterization of selenate, selenite, and chromate adsorption at the solid–water interface of γ-Al2O3

The interaction of selenate, selenite, and chromate with the hydrated surface of γ-Al₂O₃ was studied using a combination of macroscopic pH edge data, electrophoretic mobility measurements, and X-ray absorption spectroscopic analyses. The pH edge data show generally increased oxyanion adsorption with decreasing pH, and indicate ionic strength-(in)dependent adsorption of chromate and selenate across the pH range 4–9, and ionic strength-(in)dependent adsorption of selenite in this pH range. The adsorption of chromate peaks at pH 5.0, whereas for selenate and selenite no pH adsorption maxima are observed. Electrophoretic mobility measurements show that all three oxyanions decrease the zeta potential of γ-Al₂O₃ upon adsorption; however, only selenite decreased the pH_PZC of the γ-Al₂O₃ sorbent. EXAFS data indicate that selenite ions are coordinated in a bridging bidentate fashion to surface AlO₆ octahedra, whereas no second-neighbor Al scattering was observed for adsorbed selenate ions. Combined, the results presented here show that pH is a major factor in determining the extent of adsorption of selenate, selenite, and chromate on hydrated γ-Al₂O₃. The results point to substantial differences between these anions as to the mode of adsorption at the hydrated γ-Al₂O₃ surface, with selenate adsorbing as nonprotonated outer-sphere complexes, chromate forming a mixture of monoprotonated and nonprotonated outer-sphere adsorption complexes, and selenite coordinating as inner-sphere surface complexes in bridging configuration.     

The Kinetics of Oxidation of L-Tryptophan by Water-Soluble Colloidal Manganese Dioxide

The kinetics of the oxidation of L-tryptophan by water-soluble colloidal MnO₂ (prepared from potassium permanganate and sodium thiosulfate solutions) has been carried out in aqueous perchloric acid medium at different temperatures. Monitoring the disappearance of the MnO₂ spectrophotometrically at 390 nm was used to follow the kinetics. The first-order kinetics with respect to [L-tryptophan] at low concentrations shifted to zero-order at higher concentrations. The reaction followed first-order with respect to [MnO₂] but fractional-order with respect to [HClO₄]. Adding trapping agents enhanced the rate of the reaction. The Arrhenius and Eyring equations were found valid for the reaction between 35°C and 55°C and different activation parameters (E_a, ΔH^#, ΔS^#) have been evaluated. On the basis of various observations and product characterization a plausible mechanism has been envisaged for the reaction taking place at the colloid surface. The results suggest formation of an adsorption complex between L-tryptophan and MnO₂. The complex decomposes in a rate-determining step, leading to the formation of free radical, which again reacts with the colloidal MnO₂ in a subsequent fast step to yield products. Freundlich isotherm is used to explain the adsorption of L-tryptophan on the colloidal MnO₂.     

Effect of environmental parameters on the sequestration of radionickel by Mg2Al layered double hydroxide

In this work, sequestration of Ni(II) from aqueous solution to Mg₂Al layered double hydroxide (Mg₂Al LDH) by adsorption process as a function of various water quality parameters and temperature was investigated. The results showed that the kinetic adsorption could be described by a pseudo-second order model very well. The adsorption of Ni(II) on Mg₂Al LDH was strongly dependent on pH and ionic strength. The presence of humic acid (HA)/fulvic acid (FA) enhanced the adsorption of Ni(II) on Mg₂Al LDH at low pH, whereas reduced Ni(II) adsorption at high pH. The Langmuir model fitted the adsorption isotherms of Ni(II) better than the Freundlich model at three different temperatures of 298, 318 and 338 K. The thermodynamic parameters (ΔH^o, ΔS^o and ΔG^o) calculated from the temperature dependent adsorption isotherms indicated that the adsorption process of Ni(II) on Mg₂Al LDH was endothermic and spontaneous. The results show that Mg₂Al LDH is a promising material for the preconcentration and separation of pollutants from large volumes of aqueous solutions.     

Adsorption and desorption studies of radiocesium on Al2O3 from aqueous solutions

The adsorption and the desorption of radiocesium from aqueous solutions containing NaNO₃ or CaCl₂ on Al₂O₃ were studied over a wide range of background electrolyte concentration and solution pH by using batch techniques in polyethylene and glass test tubes. It was found that the wall of the glass test tubes has a great effect on the adsorption and desorption data, and the adsorption-desorption hysteresis on the same time scale is negligible by using the same aqueous solutions for both adsorption and desorption in the polyethylene test tubes. The dependences of the distribution coefficient on the pH and background electrolyte concentration and the adsorption mechanism were discussed.