Synthesis and properties of rhodium(III) porphyrin cyclic tetramer and cofacial dimer

Rhodium(III) porphyrin complexes, [Rh(4-PyT(3)P)Cl](4) (1) and [Rh(2-PytB(3)P)Cl](2) (2) (4-PyT(3)P = 5-(4-pyridyl)-10,15,20-tritolylporphyrinato dianion, 2-PytB(3)P = 5-(2-pyridyl)-10,15,20-tri(4-tert-butyl)phenylporphyrinato dianion), were self-assembled and characterized by (1)H nuclear magnetic resonance spectroscopy, infrared spectroscopy, and electron spray ionization-mass spectroscopy methods. The spectroscopic results certified that the rhodium porphyrin complexes 1 and 2 have a cyclic tetrameric structure and a cofacial dimeric structure, respectively. The X-ray structure analysis of 1 confirmed the cyclic structure of the complex. The Soret bands of both oligomers were significantly broadened by excitonic interactions between the porphyrin units, compared to those observed for a corresponding analogue of Rh(TTP)(Py)Cl (TTP = 5,10,15,20-tetratolylporphyrinato dianion, Py = pyridine). Stepwise oxidation of the porphyrin rings in the oligomers was observed by cyclic voltammetry. The oligomers 1 and 2 are very stable in solution, and they slowly undergo reactions with pyridine to give corresponding monomer complexes only at high temperatures (approximately 80 degrees C).     

Arrays of double-decker porphyrins on highly oriented pyrolytic graphite

Three double-decker complexes of cerium(IV) were synthesized, which commonly have a 5,10,15,20-tetrakis(4-docosyloxyphenyl)porphyrin (C22OPP) moiety as one of the two tetrapyrrole rings. The three complexes-Ce(Pc)(C22OPP), Ce(C22OPP)2, and Ce(BPEPP)(C22OPP)-are distinguished by the other rings, which are Pc (=phthalocyanine), C22OPP, and BPEPP (=5,15-bis[4-(phenylethynyl)phenyl]porphyrin), respectively. The rate of inter-ring rotation of Ce(BPEPP)(C22OPP) was estimated to be approximately 3 s(-1) in solution at room temperature. These complexes assemble into ordered arrays at the interface of 1-phenyloctane and the highly oriented pyrolytic graphite surface, owing to the affinity of the long alkyl chains toward the surface, as revealed by means of scanning tunneling microscopy (STM) with molecular resolution. The shape of the upper ring is reflected in the STM image. Thus, Ce(Pc)(C22OPP), Ce(C22OPP)2, and Ce(BPEPP)(C22OPP) were observed as circular, square, and elliptic features, respectively. Possible molecular arrangements in the array of Ce(BPEPP)(C22OPP) are proposed by comparing STM images and molecular models. In the mixed arrays of Ce(BPEPP)(C22OPP) and H2(C22OPP), the double-decker complexes were distinguished by brighter features. Competitive adsorption experiments showed that the adsorption of Ce(BPEPP)(C22OPP) is less favorable than that of H2(C22OPP) by DeltaG(app) = 2.7 kJ mol(-1). Ce(BPEPP)(C22OPP) molecules appeared elliptic when placed within their own row, while they appeared isotropic when flanked by H2(C22OPP) molecules. Implications of the differences in the observed shapes to the inter-ring rotation are discussed.     

Synthesis, structure, and reactivity of rhodium and iridium complexes of the chelating bis-sulfoxide tBuSOC2H4SOtBu. Selective O-H activation of 2-hydroxy-isopropyl-pyridine

The chloro-bridged rhodium and iridium complexes [M2(BTSE)2Cl2] (M = Rh 1, Ir 2) bearing the chelating bis-sulfoxide tBuSOC2H4SOtBu (BTSE) were prepared by the reaction of [M2(COE)4Cl2] (M = Rh, Ir; COE = cyclooctene) with an excess of a racemic mixture of the ligand. The cationic compounds [M(BTSE)2][PF6] (M = Rh 3, Ir 4), bearing one S- and one O-bonded sulfoxide, were also obtained in good yields. The chloro-bridges in 2 can be cleaved with 2-methyl-6-pyridinemethanol and 2-aminomethyl pyridine, resulting in the iridium(I) complexes [Ir(BTSE)(Py)(Cl)] (Py = 2-methyl-6-pyridinemethanol 5, 2-aminomethyl-pyridine 6). In case of the bulky 2-hydroxy- isopropyl-pyridine, selective OH oxidative addition took place, forming the Ir(III)-hydride [Ir(BTSE)(2-isopropoxy-pyridine)(H)(Cl)] 7, with no competition from the six properly oriented C-H bonds. The cationic rhodium(I) and iridium(I) compounds [M(BTSE)(2-aminomethyl-pyridine)][X] (M = Rh 8, Ir 10), [Rh(BTSE)(2-hydroxy- isopropyl-pyridine)][X] 9(stabilized by intramolecular hydrogen bonding), [Ir(BTSE)(pyridine)2][PF6] 12, [Ir(BTSE)(alpha-picoline)2][PF6] 13, and [Rh(BTSE)(1,10-phenanthroline)][PF6] 14 were prepared either by chloride abstraction from the dimeric precursors or by replacement of the labile oxygen bonded sulfoxide in 3 or 4. Complex 14 exhibits a dimeric structure in the solid state by pi-pi stacking of the phenanthroline ligands.     

Reactivity and equilibrium thermodynamic studies of rhodium tetrakis(3,5-disulfonatomesityl)porphyrin species with H2, CO, and olefins in water

Aqueous (D2O) solutions of tetrakis(3,5-disulfonatomesityl)porphyrin rhodium(III) aquo/hydroxo complexes ([(TMPS)Rh(III)(D2O)2]-7 (1), [(TMPS)Rh(III)(OD)(D2O)]-8 (2), and [(TMPS)Rh(III)(OD)2]-9 (3)) react with hydrogen (D2) to form an equilibrium distribution with a rhodium hydride ([(TMPS)Rh-D(D2O)]-8 (4)) and a rhodium(I) complex ([(TMPS)Rh(I)(D2O)]-9 (5)). Equilibrium constants (298 K) are measured that define the distribution for all five of these (TMPS)Rh species in this system as a function of the dihydrogen (D2) and hydrogen ion (D+) concentrations. The hydride complex [(TMPS)Rh-D(D2O)]-8 is a weak acid in D2O (Ka(298 K) = 4.3 x 10(-8)). Steric demands of the TMPS porphyrin ligand prohibit formation of a Rh(II)-Rh(II)-bonded complex, related rhodium(I)-rhodium(III) adducts, and intermolecular association of alkyl complexes which are prominent features of the rhodium tetra(p-sulfonatophenyl)porphyrin ((TSPP)Rh) system. The rhodium(II) complex ([(TMPS)Rh(II)(D2O)]-8) reacts with water to form hydride and hydroxide complexes and is not observed in D2O. The (TMPS)Rh-OD and (TMPS)Rh-D bond dissociation free energies (BDFE) are virtually equal and have a value of approximately 60 kcal mol(-1). Reactions of [(TMPS)Rh-D(D2O)]-8 in water with CO and olefins produce rhodium formyl and alkyl complexes which have equilibrium thermodynamic values comparable to the values for the corresponding substrate reactions of [(TSPP)Rh-D(D2O)]-4.     

Cooperative double deprotonation of bis(2-picolyl)amine leading to unexpected bimetallic mixed valence (M(-I), M(I)) rhodium and iridium complexes

Cooperative reductive double deprotonation of the complex [Rh(I)(bpa)(cod)](+) ([4](+), bpa = PyCH(2)NHCH(2)Py) with one molar equivalent of base produces the bimetallic species [(cod)Rh(bpa-2H)Rh(cod)] (7), which displays a large Rh(-I),Rh(I) contribution to its electronic structure. The doubly deprotonated ligand in 7 hosts the two "Rh(cod)" fragments in two distinct compartments: a "square planar compartment" consisting of one of the Py donors and the central nitrogen donor and a "tetrahedral π-imine compartment" consisting of the other pyridine and an "imine C═N" donor. The formation of an "imine donor" in this process is the result of substantial electron transfer from the {bpa-2H}(2-) ligand to one of the rhodium centers to form the neutral imine ligand bpi (bpi = PyCH(2)N═CHPy). Hence, deprotonation of [Rh(I)(bpa)(cod)](+) represents a reductive process, effectively leading to a reduction of the metal oxidation state from Rh(I) to Rh(-I). The dinuclear iridium counterpart, complex 8, can also be prepared, but it is unstable in the presence of 1 mol equiv of the free bpa ligand, leading to quantitative formation of the neutral amido mononuclear compound [Ir(I)(bpa-H)(cod)] (2). All attempts to prepare the rhodium analog of 2 failed and led to the spontaneous formation of 7. The thermodynamic differences are readily explained by a lower stability of the M(-I) oxidation state for iridium as compared to rhodium. The observed reductive double deprotonation leads to the formation of unusual structures and unexpected reactivity, which underlines the general importance of "redox noninnocent ligands" and their substantial effect on the electronic structure of transition metals.     

Rhodium complexes with the chelating and binucleating ligands P(CH2CH2Py)nPh3-n (Py = 2-pyridyl; n = 1,2): structures and fluxional behavior

Several rhodium(I) complexes of the type [RhX(CO)(PePy2)], [Rh(diene)(PePy)]+, and [Rh(diene)(PePy2)]+ (PePyn = P(CH2CH2Py)nPh3-n; Py = 2-pyridyl; n = 1, 2) have been prepared. The two former are square planar; the latter are pentacoordinated for diene = tetrafluorobenzobarrelene or norbornadiene (confirmed by X-ray diffraction), but an equilibrium of 4- and 5-coordinate isomers exists in solution for diene = 1,5-cyclooctadiene. The fluxional behavior of all these complexes is studied by NMR spectroscopy. The complex [Rh(NBD)(PePy2)]PF6.Cl2CH2 crystallizes in the monoclinic space group P21/n with a = 8.455(1) A, b = 18.068(3) A, c = 19.729(3) A, beta = 99.658(3)degrees, and Z = 4. The complexes [Rh(diene)(PePy2)]+ react with CO to give the dimeric complex [Rh2(CO)2[P(CH2CH2Py)2Ph]2](BF4)2 with the pyridylphosphine acting as P,N-chelating and P,N-bridging.     

Scanning tunneling microscopy observation of self-assembled monolayers of strapped porphyrins

In this paper, we reveal that the free-base and zinc strapped porphyrins possessing long alkyl chains, C 24OPP-HQ and Zn(C 24OPP-HQ), respectively, can be arranged on surfaces. We used scanning tunneling microscopy (STM) to observe alkyl-chain-assisted self-assembled monolayers (SAMs) of these strapped porphyrins at the solid-liquid interface. STM images revealed that the strapped benzene moiety was detectable on the porphyrin core: that is, the strapped porphyrins could be differentiated from nonstrapped analogues. We compared the population of the nonstrapped porphyrin (C 24OPP) and either of the strapped porphyrins C 24OPP-HQ or Zn(C 24OPP-HQ) in the mixed SAMs. We then confirmed that Zn(C 24OPP-HQ) is more favorably incorporated in the mixed SAMs than C 24OPP-HQ. From (1)H NMR spectroscopic and X-ray crystallographic analyses, we concluded that the factors increasing the population of Zn(C 24OPP-HQ) in the mixed SAMs are the enhanced rigidity of the porphyrin core by the zinc coordination and the flat structure of the porphyrin moiety in the saddle conformation. This study demonstrates that strapped porphyrins possessing long alkyl chains are available to arrange the functional modules on the surface via chemical modification on the strapped moiety.     

Complexation of diphenyl(phenylacetenyl)phosphine to rhodium(III) tetraphenyl porphyrins: synthesis and structural,spectroscopic, and thermodynamic studies

The coordination of diphenyl(phenylacetenyl)phosphine (DPAP, 1) to (X)Rh(III)TPP (X = I (2) or Me (3); TPP = tetraphenyl porphyrin) was studied in solution and in the solid state. The iodide is readily displaced by the phosphine, leading to the bis-phosphine complex [(DPAP)(2)Rh(TPP)](I) (4). The methylide on rhodium in 3 is not displaced, leading selectively to the mono-phosphine complex (DPAP)(Me)Rh(TPP) (5). The first and second association constants, as determined by isothermal titration calorimetry and UV-vis titrations, are in the range 10(4)-10(7) M(-1) (in CH(2)Cl(2)). Using LDI-TOF mass spectrometry, the mono-phosphine complexes can be detected but not the bis-phosphine complexes. The electronic spectrum of 4 is similar to those previously reported with other tertiary phosphine ligands, whereas (DPAP)(I)Rh(TPP) (6) displays a low energy B-band absorption and a high energy Q-band absorption. In contrast to earlier reports, displacement of the methylide on rhodium in 5 could not be observed at any concentration, and the electronic spectra of 4 and 5 are almost identical. Isothermal titration calorimetry experiments showed that all binding events are exothermic, and all are enthalpy driven. The largest values of DeltaG degrees are found for 6. The thermodynamic and UV-vis data reveal that the methylide and the phosphine ligand have an almost identical electronic trans-influence on the sixth ligand.     

Gyroscope-like molecules consisting of three-spoke stators that enclose "switchable" neutral dipolar rhodium rotators; reversible cycling between faster and slower rotating Rh(CO)I and Rh(CO)2I species

trans-Rh(CO)(Cl)(P((CH(2))(14))(3)P) is prepared from trans-Rh(CO)(Cl)(P((CH(2))(6)CH[double bond, length as m-dash]CH(2))(3))(2) by a metathesis/hydrogenation sequence, and converted by substitution or addition reactions to Rh(CO)(I), Rh(CO)(2)(I), Rh(CO)(NCS), and Rh(CO)(Cl)(Br)(CCl(3)) species; the Rh(CO)(Cl) and Rh(CO)(I) moieties rapidly rotate within the cage-like diphosphine, but the other rhodium moieties do not.     

Synthesis and reactions of binuclear diolefin rhodium(I) compounds bridged by nitrogen heterocycles. Crystal structure of dichloro-di-1,5-cyclooctadiene(μ-pyrazine)-dirhodium(I) [{Rh(1,5-C8H12)Cl}2(μ-C4H4N2)]

Binuclear complexes of rhodium(I) of the type [(dien)(X)Rh(μ-N-N)Rh(X)(dien)] (dien = 1,5-cyclooctadiene or norbornadiene; N-N = pyrazine, 4,4′-bipyridine or Phenazine and X = Cl or Br) with bridging heterocycles have been isolated and their reactions with carbon monoxide, 2,2′-bipyridine and 1,10-phenanthroline investigated. The crystal structure of [(COD)(Cl)Rh(μ-pyrazine)Rh(Cl)(COD)] has been determined.     

Equilibrium thermodynamic studies in water: reactions of dihydrogen with rhodium(III) porphyrins relevant to Rh-Rh, Rh-H, and Rh-OH bond energetics

Aqueous solutions of rhodium(III) tetra p-sulfonatophenyl porphyrin ((TSPP)Rh(III)) complexes react with dihydrogen to produce equilibrium distributions between six rhodium species including rhodium hydride, rhodium(I), and rhodium(II) dimer complexes. Equilibrium thermodynamic studies (298 K) for this system establish the quantitative relationships that define the distribution of species in aqueous solution as a function of the dihydrogen and hydrogen ion concentrations through direct measurement of five equilibrium constants along with dissociation energies of D(2)O and dihydrogen in water. The hydride complex ([(TSPP)Rh-D(D(2)O)](-4)) is a weak acid (K(a)(298 K) = (8.0 +/- 0.5) x 10(-8)). Equilibrium constants and free energy changes for a series of reactions that could not be directly determined including homolysis reactions of the Rh(II)-Rh(II) dimer with water (D(2)O) and dihydrogen (D(2)) are derived from the directly measured equilibria. The rhodium hydride (Rh-D)(aq) and rhodium hydroxide (Rh-OD)(aq) bond dissociation free energies for [(TSPP)Rh-D(D(2)O)](-4) and [(TSPP)Rh-OD(D(2)O)](-4) in water are nearly equal (Rh-D = 60 +/- 3 kcal mol(-1), Rh-OD = 62 +/- 3 kcal mol(-1)). Free energy changes in aqueous media are reported for reactions that substitute hydroxide (OD(-)) (-11.9 +/- 0.1 kcal mol(-1)), hydride (D(-)) (-54.9 kcal mol(-1)), and (TSPP)Rh(I): (-7.3 +/- 0.1 kcal mol(-1)) for a water in [(TSPP)Rh(III)(D(2)O)(2)](-3) and for the rhodium hydride [(TSPP)Rh-D(D(2)O)](-4) to dissociate to produce a proton (9.7 +/- 0.1 kcal mol(-1)), a hydrogen atom (approximately 60 +/- 3 kcal mol(-1)), and a hydride (D(-)) (54.9 kcal mol(-1)) in water.     

Cationic carbonyl complexes of rhodium(I) and rhodium(III): syntheses,vibrational spectra,NMR studies,and molecular structures of tetrakis(carbonyl)rhodium(I) heptachlorodialuminate and -gallate, [Rh(CO)4][Al2Cl7] and [Rh(CO)4][Ga2Cl7

Dimeric rhodium(I) bis(carbonyl) chloride, [Rh(CO)(2)(mu-Cl)](2), is found to be a useful and convenient starting material for the syntheses of new cationic carbonyl complexes of both rhodium(I) and rhodium(III). Its reaction with the Lewis acids AlCl(3) or GaCl(3) produces in a CO atmosphere at room temperature the salts [Rh(CO)(4)][M(2)Cl(7)] (M = Al, Ga), which are characterized by Raman spectroscopy and single-crystal X-ray diffraction. Crystal data for [Rh(CO)(4)][Al(2)Cl(7)]: triclinic, space group Ponemacr; (No. 2); a = 9.705(3), b = 9.800(2), c = 10.268(2) A; alpha = 76.52(2), beta = 76.05(2), gamma = 66.15(2) degrees; V = 856.7(5) A(3); Z = 2; T = 293 K; R(1) [I > 2sigma(I)] = 0.0524, wR(2) = 0.1586. Crystal data for [Rh(CO)(4)][Ga(2)Cl(7)]: triclinic, space group Ponemacr; (No. 2); a = 9.649(1), b = 9.624(1), c = 10.133(1) A; alpha = 77.38(1), beta = 76.13(1), gamma = 65.61(1) degrees; V = 824.4(2) A(3); Z = 2; T = 143 K; R(1) [I > 2sigma(I)] = 0.0358, wR(2) = 0.0792. Structural parameters for the square planar cation [Rh(CO)(4)](+) are compared to those of isoelectronic [Pd(CO)(4)](2+) and of [Pt(CO)(4)](2+). Dissolution of [Rh(CO)(2)Cl](2) in HSO(3)F in a CO atmosphere allows formation of [Rh(CO)(4)](+)((solv)). Oxidation of [Rh(CO)(2)Cl](2) by S(2)O(6)F(2) in HSO(3)F results in the formation of ClOSO(2)F and two seemingly oligomeric Rh(III) carbonyl fluorosulfato intermediates, which are easily reduced by CO addition to [Rh(CO)(4)](+)((solv)). Controlled oxidation of this solution with S(2)O(6)F(2) produces fac-Rh(CO)(3)(SO(3)F)(3) in about 95% yield. This Rh(III) complex can be reduced by CO at 25 degrees C in anhydrous HF to give [Rh(CO)(4)](+)((solv)); addition of SbF(5) at -40 degrees C to the resulting solution allows isolation of [Rh(CO)(4)][Sb(2)F(11)], which is found to have a highly symmetrical (D(4)(h)()) [Sb(2)F(11)](-) anion. Oxidation of [Rh(CO)(2)Cl](2) in anhydrous HF by F(2), followed in a second step by carbonylation in the presence of SbF(5), is found to be a simple, straightforward route to pure [Rh(CO)(5)Cl][Sb(2)F(11)](2), which has previously been structurally characterized by us. All new complexes are characterized by vibrational and NMR spectroscopy. Assignment of the vibrational spectra and interpretation of the structural data are supported by DFT calculations.     

Synthesis and Structures of RhI and IrI Complexes Supported by N‐Heterocyclic Carbene‐Phosphinidene Adducts

N‐Heterocyclic carbene‐phosphinidene adducts of the type (IDipp)PR [R = Ph ( 5 ), SiMe₃ ( 6 ); IDipp = 1,3‐bis(2,6‐diisopropylphenyl)imidazolin‐2‐ylidene] were used as ligands for the preparation of rhodium(I) and iridium(I) complexes. Treatment of (IDipp)PPh ( 5 ) with the dimeric complexes [M(μ‐Cl)(COD)]₂ (M = Rh, Ir; COD = 1,5‐cyclcooctadiene) afforded the corresponding metal(I) complexes [M(COD)Cl{(IDipp)PPh}] [M = Rh ( 7 ) or Ir ( 8 )] in moderate to good yields. The reaction of (IDipp)PSiMe₃ ( 6 ) with [Ir(μ‐Cl)(COD)]₂ did not yield trimethylsilyl chloride elimination product, but furnished the 1:1 complex, [Ir(COD)Cl{(IDipp)PSiMe₃}] ( 9 ). Additionally, the rhodium‐COD complex 7 was converted into the corresponding rhodium‐carbonyl complex [Rh(CO)₂Cl{(IDipp)PPh}] ( 10 ) by reaction with an excess of carbon monoxide gas. All complexes were fully characterized by NMR spectroscopy, microanalyses, and single‐crystal X‐ray diffraction studies.     

New Pentacoordinated Rhodium Species as Unexpected Products during the In Situ Generation of Dimeric Diphosphine‐Rhodium Neutral Catalysts

Dimeric rhodium complexes of the type [Rh(PP)(μ₂‐Cl)]₂ (PP=diphosphine) are often used as precatalysts and are generated “in situ” from the corresponding diolefin complexes by exchange of the diene with the desired diphosphine. Herein, we report that the “in situ” procedure also leads to unexpected monomeric pentacoordinated neutral complexes of the type [RhCl(PP)(diolefin)], for the first time herein characterized by NMR spectroscopy and X‐ray crystallography for the ligands 1,4‐bis(diphenylphosphino)propane (DPPP), 1,4‐bis(diphenylphosphino)butane (DPPB), and 2,2′‐bis(diphenylphosphino)‐1,1′‐binaphthyl (BINAP). The pentacoordinated complexes are in equilibrium with the dimeric target compound [Rh(PP)(μ₂‐Cl)]₂. The equilibrium is influenced by the rhodium‐diolefin precursor, the solvent and the temperature. Based on the results of NMR and UV/Vis spectroscopic analysis (kinetics) it could be shown that the pentacoordinated complex [RhCl(PP)(diolefin)] may arise both from the “in situ”‐generated neutral complex [Rh(PP)(μ₂‐Cl)] by reaction with the free diolefin and, more surprisingly, directly from [Rh(diolefin)(μ₂‐Cl)]₂ and the diphosphine.     

Early-late heterobimetallic alkoxides as model systems for late-transition-metal catalysts supported on titania

Titanium complexes with chelating alkoxide ligands [TiCp*(O(2)Bz)(OBzOH)] (1) and [TiCp*(Me)((OCH(2))(2)Py)] (2) were synthesised by reaction of [TiCp*Me(3)] (Cp*=eta(5)-C(5)Me(5)) with 2-hydroxybenzyl alcohol ((HO)(2)Bz) and 2,6-pyridinedimethanol ((HOCH(2))(2)Py), respectively. Complex 1 reacts with [(M(mu-OH)(cod))(2)] (M=Rh, Ir) to yield the early-late heterobimetallic complexes [TiCp*(O(2)Bz)(2)M(cod)] [M=Rh (3), Ir (4)]. Carbon monoxide readily replaces the COD ligand in 3 to give the rhodium dicarbonyl derivative [TiCp*(O(2)Bz)(2)Rh(CO)(2)] (5). Compound 2 reacts with [(M(mu-OH)(cod))(2)] (M=Rh, Ir) with protonolysis of a Tibond;Me bond to give [TiCp*((OCH(2))(2)Py)(mu-O)M(cod)] [M=Rh (6), Ir (7)]. The molecular structures of complexes 3, 5 and 7 were established by single-crystal X-ray diffraction studies.     

Anionic platinum complexes with 2-pyridylphosphines as ligands for rhodium: synthesis of zwitterionic Pt-Rh organometallic compounds

Bimetallic zwitterionic platinum(II)-rhodium(I) complexes of the type [(C(6)F(5))(3)Pt(micro-PPy(n)Ph(3)(-)(n)Rh(CO)(2))] and [(C(6)F(5))(3)Pt(micro-PPy(n)Ph(3)(-)(n)())Rh(diene))] (n = 2, 3; Py = 2-pyridyl) have been prepared. The P end of the bridging ligands (micro-PPy(n)Ph(3)(-)(n)) is always coordinated to the Pt center, while the N-donor ends chelate the Rh atom, giving metallacycles comparable to pyrazolylborate-Rh complexes. These metallacycles can adopt two conformations, either with the Pt complex in pseudoaxial position approaching the Rh center or with the Pt complex in a remote position. The preferred conformation depends on the steric hindrance at the rhodium center. In less sterically demanding Rh-carbonyl complexes the Pt moiety gets close to the Rh moiety as this brings closer the opposite charges of the zwitterion. For diene complexes mixtures of conformers are obtained. The X-ray structures of [(C(6)F(5))(3)Pt(micro-PPhPy(2))Rh(COD)] (COD = 1,5-cyclooctadiene) and [(C(6)F(5))(3)Pt(micro-PPhPy(2))Rh(CO)(2)] are reported.     

Cationic and neutral diphenyldiazomethanerhodium(I) complexes as catalytically active species in the C-C coupling reaction of olefins and diphenyldiazomethane

Cationic rhodium(I) complexes cis-[Rh(acetone)2(L)(L')]+ (2: L = L'=C8H14; 3: L=C8H14; L'=PiPr3; 4: L=L'=PiPr3), prepared from [RhCl(C8H14)2]2] and isolated as PF6 salts, catalyze the C-C coupling reaction of diphenyldiazomethane with ethene, propene, and styrene. In most cases, a mixture of isomeric olefins and cyclopropanes were obtained which are formally built up by one equivalent of RCH=CH2 (R = H, Me, Ph) and one equivalent of CPh2. The efficiency and selectivity of the catalyst depends significantly on the coordination sphere around the rhodium(I) center. Treatment of 4 with Ph2CN2 in the molar ratio of 1:1 and 1:2 gave the complexes trans-[Rh(PiPr3)2(acetone)(eta1-N2CPh2)]PF6 (8) and trans-[Rh(PiPr3)2(eta1-N2CPh2)2]PF6 (9), of which 8 was characterized by X-ray crystallography. Since 8 and 9 not only react with ethene but also catalyze the reaction of C2H4 and free Ph2CN2, they can be regarded as intermediates (possibly resting states) in the C-C coupling process. The lability of 8 and 9 is illustrated by the reactions with pyridine and NaX (X=Cl, Br, I, N3) which afford the mono(diphenyldiazomethane)rhodium(I) compounds trans-[Rh(PiPr3)2(py)(eta1-N2CPh2)]PF6 (10) and trans-[RhX(eta1-N2CPh2)(PiPr3)2] (11-14), respectively. The catalytic activity of the neutral complexes 11 - 14 is somewhat less than that of the cationic species 8, 9 and decreases in the order Cl > Br> I > N3.     

Monomeric and dimeric copper(II) complexes of a novel tripodal peptide ligand: structures stabilized via hydrogen bonding or ligand sharing

The novel tripodal ligand N-(bis(2-pyridyl)methyl)-2-pyridinecarboxamide (Py3AH) affords monomeric and dimeric copper(II) complexes with coordinated carboxamido nitrogens. Although many chloro-bridged dimeric copper(II) complexes are known, [Cu(Py3A)(Cl)] (1) remains monomeric and planar with a pendant pyridine and does not form either a chloro-bridged dimer or the ligand-shared dimeric complex [Cu(Py3A)(Cl)]2 (4) in solvents such as CH3CN. When 1 is dissolved in alcohols, square pyramidal alcohol adducts [Cu(Py3A)(Cl)(CH3OH)] (2) and [Cu(Py3A)(Cl)(C2H5OH)] (3) are readily formed. In 2 and 3, the ROH molecules are bound at axial site of copper(II) and the weak axial binding of the ROH molecule is strengthened by intramolecular hydrogen bonding between ROH and the pendant pyridine nitrogen. Two ligand-shared dimeric species [Cu(Py3A)(Cl)]2 (4) and [Cu(Py3A)]2(ClO4)2 (5) have also been synthesized in which the pendant pyridine of one [Cu(Py3A)] unit completes the coordination sphere of the other [Cu(Py3A)] neighbor. These ligand-shared dimers are obtained in aqueous solutions or in complete absence of chloride in the reaction mixtures.     

Selective oxygenation of amphiphilic thiacalix[3]pyridine Rh(I) diene complexes in both water and organic solvents

Thiacalix[3]pyridine (Py3S3) reacted with [Rh(diene)(mu-Cl)]2(diene = 1,5-cyclooctadiene (cod), 2,5-norbornadiene (nbd)) to give amphiphilic trigonal bipyramidal complexes, [Rh(Py3S3)(diene)]Cl. Sulfur bridges of the Py3S3 ligand in these complexes were selectively oxygenated by m-chloroperoxybenzoic acid in dichloromethane to give sulfinylcalix[3]pyridine complexes, [Rh(Py3(SO)3)(diene)]+, in which all three oxygen atoms of the SO groups occupy the equatorial positions. Structures of the complexes were analysed by X-ray crystallography and the oxidation reaction was investigated using 1H NMR spectroscopy and electrospray ionisation mass spectrometry showing that the oxygenation of the sulfur atoms in the ligand proceeded stepwise and further oxygenation of the SO moiety occurred only for the nbd complex having the smaller diene ligand resulting in [Rh(Py3(SO)2(SO2))(nbd)]+. On the other hand, the oxidation of [Rh(Py3S3)(cod)]+ by H2O2 in water did not result in oxygenation of the sulfur bridges but the cod ligand is hydroxygenated to give 1,4,5,6-eta4-2-hydroxycycloocta-4-ene-1,6-di-yl.     

Dirhodium(II) dicarboxylato complexes containing carbonyl and C-bonded methoxycarbonyl ligands

Oxidation of rhodium(I) carbonyl chloride, [Rh(CO)₂Cl]₂, with copper(II) acetate or isobutyrate in methanol solutions yields binuclear double carboxylato bridged rhodium(II) complexes with RhRh bonds, [Rh(μ-OOCRκO)(COOMeκC)(CO)(MeOH)]₂, where R=CH₃ or i-C₃H₇. According to X-ray data, surrounding of each rhodium atom in these complexes is close to octahedral and consists of another rhodium atom, two oxygens of carboxylato ligands, terminal carbonyl group, C-bonded methoxycarbonyl ligand, and axial CH₃OH. Methoxycarbonyl ligand is shown to originate from CO group of the parent [Rh(CO)₂Cl]₂ and OCH₃ group of solvent. N- and P-donor ligands L (p-CH₃C₆H₄NH₂, P(OPh)₃, PPh₃, PCy₃) readily replace the axial MeOH yielding [Rh(μ-OOCRκO)(COOMeκC)(CO)(L)]₂. The X-ray data for the complex with R=i-C₃H₇, L=PPh₃ showed the same molecular outline as with L=MeOH. Electronic effects of axial ligands L on the spectral parameters of terminal carbonyl group are essentially the same as in the known series of rhodium(I) complexes (an increase of δ¹³C and a decrease of ν(CO) with strengthening of σ-donor and weakening of π-acceptor ability of L).