Sensitive determination of verticine and verticinone in Bulbus Fritillariae by ionic liquid assisted capillary electrophoresis-electrochemiluminescence system

CE/Ru(bpy)₃²⁺ electrochemiluminescence (ECL) system with the assistance of ionic liquids (ILs) was successfully established for sensitive determination of verticine and verticinone in Bulbus Fritillariae for the first time. Migration behavior of alkaloid largely relies on the hydrogen bonding interactions between alkyl imidazolium cations in ILs and the alkaloids. Running buffer containing 40 mmol/L 1-butyl-3-methylimidazolium tetrafluoroborate (BMImBF₄) IL-8 mmol/L phosphate resulted in significant changes in separation selectivity for alkaloids with similar structures. The highest sensitivity of the detection was obtained by maintaining the detection potential at 1.2 V. Under the optimized conditions, relative standard derivations of the ECL intensity and the migration time were 3.27 and 2.84% for verticine and 4.42 and 1.69% for verticinone, respectively. The standard curves were linear between 1 × 10⁻⁸ and 1 × 10⁻⁶ mol/L for verticine and between 5 × 10⁻⁸ and 1 × 10⁻⁶ mol/L for verticinone, respectively. Detection limits of 1.25 × 10⁻¹⁰ mol/L for verticine and 1 × 10⁻¹⁰ mol/L for verticinone were obtained (S/N = 3). Developed method was successfully applied to determine the amounts of alkaloids in Bulbus Fritillariae.     

Peptide bond formation catalyzed by α-chymotrypsin in ionic liquids

α-Chymotrypsin catalyzed peptide bond formation was studied in ionic liquids using the synthesis of a protected fragment of Leu-enkephalin, ZTyrGlyGlyOEt, as model reaction. MOEMIM·PF₆ was found to be the most favorable solvent among the six different 1-alkyl-3-methylimidazolium hexafluorophosphates and tetrafluoroborates ionic liquids screened. With MOEMIM·PF₆ as reaction media, several di- or tripeptide derivatives were successfully prepared in 68-75% isolated yields.     

On the use of ionic liquids as mobile phase additives in high-performance liquid chromatography. A review

The popularity of ionic liquids (ILs) has grown during the last decades in several analytical separation techniques. Consequently, the number of reports devoted to the applications of ILs is still increasing. This review is focused on the use of ILs (mainly imidazolium-based associated to chloride and tetrafluoroborate) as mobile phase additives in high-performance liquid chromatography (HPLC). In this approach, ILs just function as salts, but keep several kinds of intermolecular interactions, which are useful for chromatographic separations. Both cation and anion can be adsorbed on the stationary phase, creating a bilayer. This gives rise to hydrophobic, electrostatic and other specific interactions with the stationary phase and solutes, which modify the retention behaviour and peak shape. This review updates the advances in this field, with emphasis on topics not always deeply considered in the literature, such as the mechanisms of retention, the estimation of the suppressing potency of silanols, modelling and optimisation of the chromatographic performance, and the comparison with other additives traditionally used to avoid the silanol problem.     

1-Butyl-3-methylimidazolium Hydrogen Sulfate ([bmim]-HSO4)–Mediated Synthesis of Polysubstituted Quinolines

In this research, polysubstituted quinolines are prepared from the reaction of 2-aminobenzophenones and ethylacetoacetate or ketones in the presence of 1-butyl-3-methylimidazolium hydrogen sulfate [bmim]HSO₄ as an acidic ionic liquid in good to high yields at 70 °C under solvent-free conditions.     

Microwave-assisted separation of ionic liquids from aqueous solution of ionic liquids

Microwave-assisted separation has been applied to recover ionic liquid (IL) from its aqueous solution as an efficient method with respect to time and energy compared to the conventional vacuum distillation. Hydrophilic ILs such as 1-butyl-3-methylimidazolium tetrafluoroborate ([Bmim][BF(4)]), 1-butyl-3-methylimidazolium trifluoromethanesulfonate ([Bmim][TfO]) and 1-ethyl-3-methylimidazolium methylsulfate ([Emim][MS]) could be recovered in 6 min from the mixture of ILs and water (1:1, w/w) under microwave irradiation at constant power of 10 W while it took at least 240 min to obtain ILs containing same water content (less than 0.5 wt%) by conventional vacuum oven at 363.15 K with 90 kPa of vacuum pressure. Energy consumptions per gram of evaporated water from the homogeneous mixture of hydrophilic ILs and water (1:1, w/w) by microwave-assisted separation were at least 52 times more efficient than those in conventional vacuum oven. It demonstrated that microwave-assisted separation could be used for complete recovery of ILs in sense of time and energy as well as relevant purity.     

Extension of the Ye and Shreeve group contribution method for density estimation of ionic liquids in a wide range of temperatures and pressures

An extension of the Ye and Shreeve group contribution method [C. Ye, J.M. Shreeve, J. Phys. Chem. A 111 (2007) 1456–1461] for the estimation of densities of ionic liquids (ILs) is here proposed. The new version here presented allows the estimation of densities of ionic liquids in wide ranges of temperature and pressure using the previously proposed parameter table. Coefficients of new density correlation proposed were estimated using experimental densities of nine imidazolium-based ionic liquids. The new density correlation was tested against experimental densities available in literature for ionic liquids based on imidazolium, pyridinium, pyrrolidinium and phosphonium cations. Predicted densities are in good agreement with experimental literature data in a wide range of temperatures (273.15–393.15 K) and pressures (0.10–100 MPa). For imidazolium-based ILs, the mean percent deviation (MPD) is 0.45% and 1.49% for phosphonium-based ILs. A low MPD ranging from 0.41% to 1.57% was also observed for pyridinium and pyrrolidinium-based ILs.     

A comparative study of CH4 and CF4 rf discharges using a consistent plasma physics and chemistry simulator

A self-consistent, one-dimensional simulator for the physics and chemistry of radio frequency (rf) plasmas was developed and applied for CH₄ and CF₄. The simulator consists of a fluid model for the discharge physics, a commercial Boltzmann equation solver for calculations of electron energy distribution fuction (EEDF), a generalized plasma chemistry code, and an interface module among the three models. The CH₄ and CF₄ discharges are compared and contrasted: CH₄ plasmas are electropositive, with negative ion densities one order of magnitude less than those of electrons, whereas CF₄ plasmas are electronegative, with ten times more negative ions than electrons. The high-energy tail of tire EEDF in CH₄, lies below both the Druyvensteyn and Maxwell distributions, whereas tire EEDF high-energy tail in CF₄ lies between the two. For CH₄, the chemistry model was applied for four species, namely, CH₄ CH₃ CH₂, and H, whereas for CF₄, five species were examined namely CF₄, CF₃, CF₂, CF, and F The predicted densities and profiles compare favorably with experimental data. Finally, the chemistry results were fedback into the physics model until convergence was obtained.     

Partial molar volumes of selected gases in some ionic liquids

The partial molar volume of a gas that is dissolved at high dilution in a solvent is required to express the influence of pressure on Henry's constant as well as to describe the volume change (expansion) of the liquid caused by the dissolved gas. The correlations of recently published experimental results for the solubility of some selected gases (CO₂, Xe, CH₄, CF₄, H₂, CO, O₂) in three imidazolium-based ionic liquids (1-n-butyl-3-methylimidazolium hexafluorophosphate ([bmim][PF₆]), 1-n-butyl-3-methylimidazolium methyl sulfate ([bmim][CH₃SO₄]), and 1-n-hexyl-3-methylimidazolium bis(trifluoromethylsulfonyl)amide ([hmim][Tf₂N])) determined by the synthetic method were re-evaluated by also considering the experimentally determined volumetric properties. The new evaluation does not change the published results for Henry's constants, but additionally yields reliable information on the partial molar volume of those gases in the mentioned ionic liquids at temperatures from about 293 to 413 K.     

Electrocatalytic activity of hemoglobin in sodium alginate/SiO<Subscript>2</Subscript> nanoparticle/ionic liquid BMIMPF<Subscript>6</Subscript> composite film

A novel biocompatible composite film containing sodium alginate (SA), room temperature ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate (BMIMPF₆), SiO₂ nanoparticle, and hemoglobin (Hb) was fabricated and covered on the surface of a traditional carbon paste elecrode (CPE). The immobilized Hb on the electrode surface showed good direct electrochemical behaviors, and a pair of quasi-reversible redox peaks of Hb was obtained, which indicated that the direct electron transfer of Hb with the electrode surface had been achieved. The SA/nano-SiO₂/BMIMPF₆/Hb/CPE showed dramatically electrocatalytic activity to the reduction of trichloroacetic acid, hydrogen peroxide (H₂O₂), and oxygen (O₂). The kinetic parameters for the electrocatalytic reactions were evaluated. The composite film showed the potential to the biosensor and biocatalysis.     

Preparation and study of hydrides of fullerenes C60 and C70

Fullerene hydrides were prepared by hydrogenation of fullerences C₆₀ and C₇₀ using proton transfer from 9,10-dihydroanthracene to fullerene and were studied by mass spectrometry (electron impact, field desorption), IR, UV, and¹H and¹³C NMR spectroscopy. The main product of the hydrogenation of C₆₀ is C₆₀H₃₆, which is sufficiently stable. Hydrogenation of fullerene C₇₀ gives a series of polyhydrides C₇₀H _n (n=36–46), and the main product is C₇₀H₃₆. The dehydrogenation of C₆₀H₃₆ by 2,3-dichloro-5,6-dicyano-1,4-benzoquinone is not quantitative and results in the formation of fullerene derivatives along with C₆₀. The comparison of the IR and¹H and¹³C NMR spectral data for solid C₆₀H₃₆ with the theoretical calculations suggests that the fullerene hydride has aT-symmetric structure and contains four isolated benzenoid rings located at tetrahedral positions on the surface of the closed skeleton of the molecule. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya. No. 4, pp. 671–678, April, 1997.     

Structural characterization of triorganotin(IV) complexes with sodium fusidate and DFT calculations

Three new complexes of the steroid sodium fusidate (sodium 2-[(1S,2S,5R,6S,7S,10S,11S,13S, 14Z,15R,17R)-13-(acetyloxy)-5,17-dihydroxy-2,6,10,11-tetramethyl tetracyclo[8.7.0.0^2,7.0^11,15] heptadecan-14-ylidene]-6-methylhept-5-enoate = (NaFusidate, NaFA)]), with triorganotin(IV) moieties have been prepared and investigated by conventional techniques as FTIR, Mössbauer, ESI-MS and NMR spectroscopy. The isolated compounds showed stoichiometries organotin(IV)/fusidate 1/1, R₃Sn(IV)FA (R = Me, FA1; Bu, FA2; Ph, FA3). The ligand coordination sites were determined by FTIR spectroscopic measurements. In the complexes, the carboxylate group of the fusidate ligand behaves as monodentate monoanionic donor, binding the Sn(IV) through one oxygen atom.On the basis of C-Sn-O_COO angles, calculated through the rationalization of the ¹¹⁹Sn Mössbauer parameter nuclear quadrupole splitting, it has been confirmed that, in all the solid state complexes, the Sn(IV) was tetracoordinated in a distorted tetrahedral structure.Further data from ¹¹⁹Sn CP-MAS spectra confirmed the distorted tetrahedral arrangement.In MeOH solution, ¹H, ¹³C and ¹¹⁹Sn NMR spectroscopy showed monomeric complexes, where the carboxylate group mainly acts as monodentate ester-type ligand, and the occurrence of a coordinated solvent molecule to the tin center, as validated by non-relativistic NMR DFT study.     

Gas-chromatographische Spurenbestimmung von C1- und C2-Fluor- und Chlorkohlenwasserstoffen in Luft

Zusammenfassung Als Beitrag zur Untersuchung des viel diskutierten Ozonabbaus wurde eine Analysenmethode zur quantitativen Bestimmung von CCl₄ (R10), CFCl₃ (R11), CF₂Cl₂ (R 12), CHCl₃, CH₃-CCl₃, C₂HCl₃ und C₂Cl₄ ausgearbeitet. Geeignete Methoden der Probenahme, Anreicherung, Detektion und der gesamten gas-chromatographischen Technik ermöglichen Bestimmungen in ppb-Bereich (10^–9 V/V) und ppt-Bereich (10^–12 V/V) bis herab zur Nachweisgrenze, die für alle genannten Verbindungen bei 10 ppt (V/V) liegt, u. U. auch darunter. Im Spurenbereich 100 ppt (V/V) werden eine Genauigkeit von < 10% und eine Reproduzierbarkeit von < 5 % erreicht, wenn die Untersuchung unmittelbar oder wenigstens innerhalb von 2 Tagen nach der Speicherung durchgeführt wird. Ist dies nicht möglich, wird ein besonderes Gas-Sammelgefäß verwendet, von dem aus in das Speicherrohr übergeführt werden kann.

---

Gas-chromatographic determination of traces of C₁- and C₂-fluoro- and chlorohydrocarbons in air

Summary As a contribution to the frequently discussed ozone decomposition an analytical method has been elaborated for the quantitative determination of CCl₄, CFCl₃, CF₂Cl₂, CHCl₃, CH₃-CCl₃, C₂HCl₃, and C₂Cl₄. Suitable methods of sampling, enrichment, detection, and the whole gas-chromatographic operation allow determinations in the ppb range (10^–9 V/V) and the ppt-range (10^–12 V/V) down to the limit of detection at 10 ppt for all the cited compounds. For trace amounts of 100 ppt, an accuracy of < 10% and a reproducibility of < 5 % are reached if the determination is carried out immediately or at least 2 days after storage. If this is impossible, a special gassampling vessel is employed from which the sample is transferred to the storage column.

Herrn Prof. Hartmann zum 65. Geburtstag gewidmet     

A Generalized Method for the Synthesis of Carbon-Encapsulated Fe3O4 Composites and Its Application in Water Treatment

In this paper, a simple and environmentally friendly method was developed for the preparation of highly stable C@Fe₃O₄ composites with controllable morphologies using sodium alginate as the carbon source and the easily obtained α-Fe₂O₃ as the precursors. The morphologies of the as-prepared C@Fe₃O₄ composites, inherited from their corresponding precursors of α-Fe₂O₃, survived from the annealing treatments, were characterized by the field-emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), X-ray diffraction (XRD) and inductively coupled plasma-atomic emission spectroscopy (ICP-AES). The C@Fe₃O₄ composites resisted to oxidation, acidification and aggregation, exhibiting porous structures and ferromagnetic properties at room temperature. Moreover, the adsorption performance of the C@Fe₃O₄ composites was evaluated by absorbing MB (methylene blue) in liquid environment. Experiments indicated that the C@Fe₃O₄ composites exhibited highly enhanced adsorption capacities and efficiencies as compared with their corresponding precursors of α-Fe₂O₃. This generalized method for the synthesis of C@Fe₃O₄ composites provides promising applications for the highly efficient removal of MB from industrial effluents.     

Simple and efficient solid-phase synthesis of unprotected peptide aldehyde for peptide segment ligation

We describe an efficient solid-phase synthesis of C-terminal peptide aldehyde. Making use of the stability of the PAM linker towards both acid and base conditions, a pentapeptide was synthesized starting from a PAM resin according to Fmoc/tBu chemistry. The side-chains were deprotected by TFA. The peptide was cleaved by aminolysis with aminoacetaldehyde-dimethylacetal leading to a C-terminal masked aldehyde. The unprotected peptide aldehyde was then coupled to amino-oxy derivatives by chemoselective ligation in aqueous solution.     

Characterisation and determination of fullerenes: A critical review

A prominent sector of nanotechnology is occupied by a class of carbon-based nanoparticles known as fullerenes. Fullerene particle size and shape impact in how easily these particles are transported into and throughout the environment and living tissues. Currently, there is a lack of adequate methodology for their size and shape characterisation, identification and quantitative detection in environmental and biological samples. The most commonly used methods for their size measurements (aggregation, size distribution, shape, etc.), the effect of sampling and sample treatment on these characteristics and the analytical methods proposed for their determination in complex matrices are discussed in this review. For the characterisation and analysis of fullerenes in real samples, different analytical techniques including microscopy, spectroscopy, flow field-flow fractionation, electrophoresis, light scattering, liquid chromatography and mass spectrometry have been reported. The existing limitations and knowledge gaps in the use of these techniques are discussed and the necessity to hyphenate complementary ones for the accurate characterisation, identification and quantitation of these nanoparticles is highlighted.     

Synthesis and Characterization of an α-Fe2O3-Decorated g-C3N4 Heterostructure for the Photocatalytic Removal of MO

This study describes the preparation of graphitic carbon nitride (g-C₃N₄), hematite (α-Fe₂O₃), and their g-C₃N₄/α-Fe₂O₃ heterostructure for the photocatalytic removal of methyl orange (MO) under visible light illumination. The facile hydrothermal approach was utilized for the preparation of the nanomaterials. Powder X-ray diffraction (XRD), Scanning electron microscopy (SEM), Energy dispersive X-ray (EDX), and Brunauer–Emmett–Teller (BET) were carried out to study the physiochemical and optoelectronic properties of all the synthesized photocatalysts. Based on the X-ray photoelectron spectroscopy (XPS) and UV-visible diffuse reflectance (DRS) results, an energy level diagram vs. SHE was established. The acquired results indicated that the nanocomposite exhibited a type-II heterojunction and degraded the MO dye by 97%. The degradation ability of the nanocomposite was higher than that of pristine g-C₃N₄ (41%) and α-Fe₂O₃ (30%) photocatalysts under 300 min of light irradiation. The formation of a type-II heterostructure with desirable band alignment and band edge positions for efficient interfacial charge carrier separation along with a larger specific surface area was collectively responsible for the higher photocatalytic efficiency of the g-C₃N₄/α-Fe₂O₃ nanocomposite. The mechanism of the nanocomposite was also studied through results obtained from UV-vis and XPS analyses. A reactive species trapping experiment confirmed the involvement of the superoxide radical anion (O₂^•−) as the key reactive oxygen species for MO removal. The degradation kinetics were also monitored, and the reaction was observed to be pseudo-first order. Moreover, the sustainability of the photocatalyst was also investigated.     

Optimized Green Extraction of Polyphenols from Cassia javanica L. Petals for Their Application in Sunflower Oil: Anticancer and Antioxidant Properties

The total phenolic content (TPC) from Cassia javanica L. petals were extracted using ethanolic solvent extraction at concentrations ranging from 0 to 90% and an SCF-CO₂ co-solvent at various pressures. Ultrasound-assisted extraction parameters were optimized using response surface methodology (RSM). Antioxidant and anticancer properties of total phenols were assessed. An SCF-CO₂ co-solvent extract was nano-encapsulated and applied to sunflower oil without the addition of an antioxidant. The results indicated that the best treatment for retaining TPC and total flavonoids content (TFC) was SCF-CO₂ co-solvent followed by the ultrasound and ethanolic extraction procedures. Additionally, the best antioxidant activity by β-carotene/linoleic acid and DPPH free radical-scavenging test systems was observed by SCF-CO₂ co-solvent then ultrasound and ethanolic extraction methods. SCF-CO₂ co-solvent recorded the highest inhibition % for PC3 (76.20%) and MCF7 (98.70%) and the lowest IC₅₀ value for PC3 (145 µ/mL) and MCF7 (96 µ/mL). It was discovered that fortifying sunflower oil with SCF-CO₂ co-solvent nanoparticles had a beneficial effect on free fatty acids and peroxide levels. The SCF-CO₂ method was finally found to be superior and could be used in large-scale processing.     

CCl2(A 1B 1,a3B1)自由基被烷烃类分子猝灭动力学

用放电 LIF实验装置,对CCl4/Ar混合气体放电产生CCl2自由基,再用541.52 nm激光将电子基态CCl2激励到激发态A 1B1(0,4,0)振动能级上,通过检测激发态CCl2时间分辨荧光信号,测得室温下CCl2(A 1B1)被烷烃类分子猝灭的实验结果,用我们提出的三能级模型分析处理实验数据,获得CCl2(A 1B1)态和CCl2(a 3B1)态的碰撞猝灭速率常数kA和ka值.