Oxygen permeability of surfactant/polymer composite films with multibilayer and inverted hexagonal structure

The permeability of oxygen through horizontally oriented multibilayer films of polyion complexes prepared from quaternary ammonium-type surfactants [CH₃(CH₂)_n-1]₂N⁺(CH₃)₂Br^?(n = 14, 16, 18), and poly(p-styrenesulfonate) or poly[2-(acrylamido)-2-methyl-1-propanesulfonate], was measured in water using an oxygen electrode. The permeability depended mainly on the phase of the multibilayers. Thus, it increased abruptly (about 10-fold) near each phase transition temperature because of the fluidity enhancement of the multibilayer. Inverted hexagonal type nonbilayer films prepared from the polyion complexes and cholesterol had greater permeability (2–20-fold) than the multibilayer films in both phases. The large permeability of the nonbilayer films was attributed to the lack of a barrier such as the bilayer and lower crystallinity of the films. It was associated neither with an increase in thermal movement of the lipid surfactant molecules nor with an increase in the water content of the films by the addition of cholesterol. © 1993 John Wiley & Sons, Inc.     

Significance of glass transition temperature to polymer latex stabilisation by nonionic surfactants

Equilibrium colloid stability measurements with nonionic surfactant (C₁₂E₈) stabilised polybutyl methacrylate (PBMA) latex dispersions indicate a sudden temperature induced destabilisation coinciding with the glass transition temperature,Tg, of the polymer. In control experiments with polystyrene latex particles of similar size, for whichTg was not approached, the flocculation temperature was significantly higher. The effect is interpreted in terms of a reduced adsorbed layer thickness aboveTg caused by mixing of part of the surfactant molecule with the polymer. This interpretation is supported by DSC, elastic modulus and mechanical damping measurements on films made from dispersions of the same latex containing commercial nonionic surfactants. These measurements indicate a shift inTg in the presence of surfactant consistent with partial penetration of the polymer surface by the surfactant. In addition, C₁₂E₈ adsorption measurements show increased adsorption (or absorption) onto PBMA aboveTg which is irreversible on both dilution and temperature reduction.     

Electrical surface potential of pulmonary surfactant

Pulmonary surfactant is a mixed lipid protein substance of defined composition that self-assembles at the air-lung interface into a molecular film and thus reduces the interfacial tension to close to zero. A very low surface tension is required for maintaining the alveolar structure. The pulmonary surfactant film is also the first barrier for airborne particles entering the lung upon breathing. We explored by frequency modulation Kelvin probe force microscopy (FM-KPFM) the structure and local electrical surface potential of bovine lipid extract surfactant (BLES) films. BLES is a clinically used surfactant replacement and here served as a realistic model surfactant system. The films were distinguished by a pattern of molecular monolayer areas, separated by patches of lipid bilayer stacks. The stacks were at positive electrical potential with respect to the surrounding monolayer areas. We propose a particular molecular arrangement of the lipids and proteins in the film to explain the topographic and surface potential maps. We also discuss how this locally variable surface potential may influence the retention of charged or polar airborne particles in the lung.     

Influence of surfactant and annealing temperature on optical properties of sol–gel derived nano-crystalline TiO2 thin films

Titanium dioxide thin films have been synthesized by sol–gel spin coating technique on glass and silicon substrates with and without surfactant polyethylene glycol (PEG). XRD and SEM results confirm the presence of nano-crystalline (anatase) phase at an annealing temperature of 300 °C. The influence of surfactant and annealing temperature on optical properties of TiO₂ thin films has been studied. Optical constants and film thickness were estimated by Swanepoel's (envelope) method and by ellipsometric measurements in the visible spectral range. The optical transmittance and reflectance were found to decrease with an increase in PEG percentage. Refractive index of the films decreased and film thickness increased with the increase in percentage of surfactant. The refractive index of the un-doped TiO₂ films was estimated at different annealing temperatures and it has increased with the increasing annealing temperature. The optical band gap of pure TiO₂ films was estimated by Tauc's method at different annealing temperature.     

Interfacial organizations of gel phospholipid and cholesterol in bovine lung surfactant films

Pulmonary surfactants stabilize the lung by way of reducing surface tension at the air-lung interface of the alveolus. 31P NMR, thin-layer chromatography, and electrospray ionization mass spectroscopy of bovine lipid extract surfactant (BLES) confirmed dipalmitoylphosphatidylcholine (DPPC) to be the major phospholipid species, with significant amounts of palmitoyl-oleoylphosphatidylcholine, palmitoyl-myristoylphosphatidylcholine, and palmitoyl-oleoylphosphatidylglycerol. BLES and DPPC spread at the air-water interface were studied through surface pressure area, fluorescence, and Brewster angle microscopy measurements. Langmuir-Blodgett films of monomolecular films, deposited on mica, were characterized by atomic force microscopy. BLES films displayed shape, size, and vertical height profiles distinct from those of DPPC alone. Calcium ions in the subphase altered BLES film domain structure. The addition of cholesterol (4 mol %) resulted in the destabilization of compressed BLES films at higher surface pressures (>40 mN m-1) and the formation of multilayered structures, apparently consisting of stacked monolayers. The studies suggested potential roles for individual surfactant lipid components in supramolecular arrangements, which could be the contributing factors in pulmonary surfactant to attain low surface tension at the air-water interface.     

Poly(ethylene glycol) (PEG) enhances dynamic surface activity of a bovine lipid extract surfactant (BLES)

Shortage or malfunction of pulmonary surfactant in alveolar space leads to a critical condition termed respiratory distress syndrome (RDS). Surfactant replacement therapy, the major method to treat RDS, is an expensive treatment. In this paper, the effect of poly(ethylene glycol) (PEG) to improve dynamic surface activity of a bovine lipid extract surfactant (BLES) was studied by axisymmetric drop shape analysis (ADSA) and a captive bubble method. The activity of BLES+PEG mixtures was compared to that of a natural surfactant containing surfactant proteins A and D. When PEG was added into BLES mixtures, the surface tension hysteresis of BLES films was minimized when the films were compressed by more than 50%. PEG also helps to quickly restore surfactant films after film collapse. Thus, as far as surface tension effects go, the findings suggest that PEG might be used as a substitute for surfactant-associated protein SP-A in therapeutic surfactant products, and might also be used to reduce the amount of BLES required in clinical applications.     

Lateral Diffusion of Lipids and Diffusion of Water through Lipid Bilayers in the Presence of (1,1-Dimethyl-3-Oxobutyl)Phosphonates

The influence of some amphiphilic (diethyl, dipropyl, and dibutyl) esters of (1,1-dimethyl-3-oxobutyl)phosphonic acid with the regularly changing number of CH₂ groups in the hydrocarbon (hydrophobic) moiety on the lateral diffusion of dioleoyl phosphatidylcholine lipid and transmembrane diffusion of water in the oriented multibilayer system was studied by ¹H pulsed field gradient NMR at phosphonate concentrations up to 30 mol %. The shape of the ³¹P NMR spectra and the dependence of the shape of the ¹H NMR spectra on the bilayer orientation suggest that the presence of phosphonates does not affect the phase state of the system. The lamellar liquid crystalline phase remains unchanged, and phosphonate molecules become incorporated into the bilayer and have the same orientation as phospholipid molecules. The presence of phosphonates in the lipid bilayer increases the coefficients of lipid lateral diffusion and water diffusion through bilayers. This effect depends monotonically on the number of CH₂ groups in the phosphonate molecule. The most probable place for the incorporation of amphiphilic phosphonate molecules is the hydrophilic/hydrophobic interphase region of the bilayer. The molecules incorporated into the interphase disorder the bilayer and increase lateral diffusion of lipids and bilayer permeability compared with the ester-free bilayer. When the number of CH₂ groups in the ester molecule increases from diethyl to dibutyl phosphonate, the arrangement of lipid hydrocarbon tails becomes more ordered. This decreases the lipid lateral diffusion coefficient and bilayer permeability to water molecules.     

Alterations in phospholipid bilayers caused by sodium dodecyl sulphate/triton X-100 mixed systems

The mechanisms governing the subsolubilizing and solubilizing interaction of sodium dodecyl sulphate (SDS)/Triton X-100 mixtures and phosphatidylcholine liposomes were investigated. Permeability alterations were detected as a change in 5(6)-carboxy-fluorescein (CF) released from the interior of vesicles and bilayer solubilization as a decrease in the static light-scattered by liposome suspensions. Three parameters were described as the effective surfactant/lipid molar ratios (Re) at which the surfactant system a) resulted in 50% of CF release (Re _50%CF); b) saturated the liposomes (Re _SAT;c) led to a complete solubilization of these structures (Re _SOL). From these parameters the corresponding surfactant partition coefficientsK _50%CF,K _SAT andK _SOL were determined. The free surfactant concentrationsS _W were lower than the mixed surfactant CMCs at subsolubilizing level, whereas they remained similar to these values during saturation and solubilization of bilayers in all cases. Although theRe increased as the mole fraction of the SDS rose (X _SDS), theK parameters showed a maximum atX _SDS values of about 0.6, 0.4 and 0.2 forK _50%CF,K _SAT andK _SOL respectively. Thus, the higher the surfactant contribution in surfactant/lipid system, the lower theX _SDS at which a maximum bilayer/water partitioning of mixed surfactant systems added took place and, consequently, the lower the influence of the SDS in this maximum bilayer/water partitioning.Abbreviations PC Phosphatidylcholine - PIPES piperazine-1,4 bis (2-ethanesulphonic acid) - SDS sodium dodecyl sulphate - X _SDS mole fraction of sodium dodecyl sulphate in the mixed system - CF 5(6)-carboxyfluorescein - Re effective surfactant/lipid molar ratio - Re _50%CF effective surfactant/lipid molar ratio for 50% CF release - Re _SAT effective surfactant/lipid molar ratio for bilayer saturation - Re _SOL effective surfactant/lipid molar ratio for bilayer solubilization - S _W surfactant concentration in the aqueous medium - S _{W, 50%CF} surfactant concentration in the aqueous medium for 50% CF release - S _{W, SAT} surfactant concentration in the aqueous medium for bilayer saturation - S _{W, SOL} surfactant concentration in the aqueous medium for bilayer solubilization - S _B surfactant concentration in the bilayers - K bilayer/aqueous phase surfactant partition coefficient - K _50%CF bilayer/aqueous phase surfactant partition coefficient for 50% CF release - K _SAT bilayer/aqueous phase surfactant partition coefficient for bilayer saturation - K _SOL bilayer/aqueous phase surfactant partition coefficient for bilayer solubilization - PL phospholipid TLC-FID, thin-layer chromatography/flame ionization detection system - PI polydispersity index - CMC critical micellar concentration - r ² regression coefficient     

Enhanced ferroelectric,dielectric and leakage properties in Ce and Ti co-doping BiFeO3 thin films

Pure BiFeO₃ (BFO), Ce and Ti individual doping and co-doping BiFeO₃ thin films were fabricated via sol–gel process on Pt/Ti/SiO₂/Si substrates. The microstructure, surface morphology, ferroelectric and dielectric properties of BFO and doped thin films were investigated in detail. X-ray diffraction reveal that all thin films are confirmed the formation of the distorted rhombohedral perovskite structure. No impure phase is identified in all the films. The Ce and Ti co-doping BiFeO₃ (BCFTO) thin films exhibited the enhanced ferroelectricity with a large remnant polarization (2P _r) of 130 μC/cm², and low leakage current density of 9.10 × 10^?6 A/cm² which is more than two orders of magnitude lower than that of pure BFO films at 100 kV/cm. The dielectric constant (364 at 1 kHz) of the BCFTO thin films is much larger than that of pure BFO thin films. These results suggest that the introductions of Ce and Ti provides an effective route for improving the ferroelectric, dielectric and leakage properties of BFO thin films.     

Comparative theoretical studies of substituted bridged bipyridines and their N-oxides

In this work, the experimental synthesized bipyridines azo-bis(2-pyridine),4,4′-dimethyl-3,3′-dinitro-2,2′-azobipyridine, and N,N′-bis(3-nitro-2-pyridinyl)-methane-diamine and a set of designed bipyridines that have similar frameworks but different linkages and substituents were studied theoretically at the B3LYP/6-31G* level of density functional theory. The gas-phase heats of formation were predicted based on the isodesmic reactions, and the condensed-phase heats of formation and heats of sublimation were estimated in the framework of the Politzer approach. The crystal densities have been computed from molecular packing and results show that incorporation of –N=N–, –N=N(O)–, –CH=N–, and –NH–NH– into bipyridines is more favorable than –CH=CH– and –NH–CH₂–NH– for increasing the density. The predicted detonation velocities (D) and detonation pressures (P) indicate that –NH₂, –NO₂, and –NF₂ can enhance the detonation performance, and –NO₂ and –NF₂ are more favorable. Introducing –N=N–, –N=N(O)–, and –NH–NH– bridge groups into bipyridines is also favorable for improving their detonation performance. The oxidation of pyridine N always but that of –N=N– bridge does not always improve the detonation properties. E4–O, the derivative with –N=N– bridge and two –NF₂ substituent groups, has the largest D (9.90 km/s) and P (47.47 GPa). An analysis of the bond dissociation energies shows that all derivatives have good thermal stability.     

Phosphaniminato‐Acetato‐Komplexe von Cobalt und Cadmium mit M4N4‐Heterocuban‐Struktur

Phosphoraneiminato‐Acetato Complexes of Cobalt and Cadmium with M₄N₄ Heterocubane Structure The phosphoraneiminato‐acetato complexes [M(NPEt₃)(O₂C–CH₃)]₄ with M = Co and Cd are formed from the anhydrous metal(II) acetates with excess Me₃SiNPEt₃ at 180 °C. By crystallization from diethyl ether blue, moisture sensitive single crystals of [Co(NPEt₃) · (O₂C–CH₃)]₄ can be obtained, while colourless single crystals of [Cd(NPEt₃)(O₂C–CH₃)]₄ · 2 CH₂Cl₂ originate from dichloromethane solution. In vacuo the intercalary CH₂Cl₂ is released. The complexes are characterized by their IR spectra and by crystal structure analyses. In both complexes the metal atoms are associated via μ₃–N bridges of the (NPEt₃^–) groups to form heterocubanes. In the cobalt complex the acetato ligands are bonded in a semichelate fashion with a short Co–O and a long Co–O bond each (Co–O distances in average 199.5 and 257.4 pm). In the cadmium complex the acetato groups form almost symmetrical chelates (Cd–O distances in average 232.1 and 237.8 pm); this leads to a distorted trigonal‐bipyramidal arrangement at the cadmium atoms. [Co(NPEt₃)(O₂C–CH₃)]₄: Space group P 1, Z = 4, lattice dimensions at –60 °C: a = 1110.1(2), b = 2051.3(5), c = 2169.5(4) pm, α = 100.03(2)°, β = 103.404(15)°, γ = 97.63(2)°, R = 0.0480. [Cd(NPEt₃)(O₂C–CH₃)]₄ · 2 CH₂Cl₂: Space group C2/c, Z = 4, lattice dimensions at –80 °C: a = 1550.2(1), b = 2101.1(1), c = 1706.1(1) pm, β = 91.09(1)°, R = 0.0311.     

Assembly properties of Triton X-100/phosphatidylcholine aggregates during liposome solubilization

The assembly properties of the nonionic surfactant Triton X-100 and phosphatidylcholine (PC) aggregates during the overall solubilization process of PC liposome were investigated. Permeability alterations were detected as a change in 5(6)-carboxyfluorescein (CF) released from the interior of vesicles and bilayer solubilization as a decrease in the static light scattered by liposome suspensions. A direct dependence was established between the bilayer/aqueous phase surfactant partition coefficients (K), the growth of vesicles and the leakage of entrapped CF in the initial interaction steps (surfactant to phospholipid molar ratioRe up to 0.2). These changes may be related to the increasing presence of surfactant molecules in the outer monolayer of vesicles. In theRe range 0.2–0.35 the coexistence of a low vesicle growth with a constant increase of CF release may be correlated with the decrease inK (increased rate of flip-flop of surfactant molecules). Furthermore, in theRe range between 0.64 and 2.0 (lytic levels) almost a linear dependence was detected between the composition of these aggregates (Re) and the decrease in both the surfactant-PC aggregate size and the static light scattered by the system. This dependence was not observed in the last solubilization steps (Re range 2.0–2.60) possibly due to the increased formation of mixed micelles in this interval. The fact that the free Triton X-100 concentration at sublytic and lytic levels showed respectively lower and similar values than its critical micelle concentration confirms that permeability alterations and solubilization were determined respectively by the action of surfactant monomer and by the formation of mixed micelles.Abbreviations PC phosphatidylcholine - PIPES piperazine-1,4 bis(2-ethanesulphonic acid) - T_X-100 Triton X-100 - CF 5(6)-carboxyflucrescein - Re enective surfactant/lipid molar ratio - Re _SAT effective surfactant/lipid molar ratio for bilayer saturation - Re _SOL enective surfactant/lipid molar ratio for bilayer solubilization - S _W surfanctant concentration in the aqueous medium - S _B surfactant concentration in the bilayers - S _T total surfactant concentration - K bilayer/aqueous phase surfactant partition coefficient - K _SAT bilayer/aqneous phase surfactant partition coefficient for bilayer saturation - K _SOL bilayer/aqueous phase surfactant partition coefficient for bilayer solubilization - PL phospholipid - TLC-FID thinlayer chromatography/flame ionization detection system - PI polydispersity index - CMC critical micellar concentration - r ² regression coefficient     

Synthesis of VO2 Nanopowders. Part II. Hydrolysis of Vanadium Alkoxide/Citric Acid Premixes: VO2 Nanostructures of Controlled Shape

Reaction of VO(OiPr)₃/citric acid premixes with excess water produces stable, blue dispersions of V_xO_y gel nanoparticles (5–100 nm in diameter) that can be isolated via acetone precipitation. Annealing under reducing conditions transforms these gel particles into crystalline, faceted VO₂ nanoparticles of similar size. Larger V_xO_y gel particles (75–200 nm in diameter) form when V_xO_y nanogel dispersions are aged with aqueous ammonia. Upon annealing, these larger gel particles transform into crystalline VO₂ rods of 50 nm–10 μm in length. Hysteresis loops confirming a semiconductor-to-metal phase transition near 68 °C expected for crystalline VO₂ particles are recorded by variable-temperature electrical resistance and powder X-ray diffraction measurements.     

Lamellar mono-amidosil hybrids doped with Rhodamine (B) methyl ester perchlorate

Ordered mono-amide cross-linked alkyl/siloxane hybrids (mono-amidosils) incorporating a Rhodamine (B) methyl ester perchlorate dye (Rh(B)CH₃ClO₄) have been synthesized through the sol–gel process and self-directed assembly. The host hybrid matrix m-A(14) is a lamellar bilayer hierarchically structured hybrid composed of short methyl-capped alkyl chains grafted to a siliceous framework through amide groups. At low dye concentration [n = 20, where n is the molar ratio of amide groups per Rh(B)CH₃ClO₄] a new lamellar structure with higher interlamellar distance than that of m-A(14) is formed, whereas at higher dye content (n = 5) this new lamellar structure coexists with that of m-A(14). The efficient encapsulation of Rh(B)CH₃ClO₄ provided by m-A(14) via hydrogen bonding interactions ensured the complete dissolution of the dye and induced a blue shift of the emission of the dye with respect to that of the isolated state, leading to an increase in the quantum yield from values below 0.01 % (measured for the isolated dye) to 4 % at n = 20. The formation of non-fluorescent H-type dimers in the sample with n = 5 accounts for the reduction of the quantum yield. The incorporation of Rh(B)CH₃ClO₄) into m-A(14) was clearly beneficial from the standpoint of the dye’s photostability, allowing to suppress photobleaching during the first 4 h. An intensification of the emission intensity by 50 and 25 % for the emission centered at 600 and 645 nm resulted, respectively, at n = 20.     

Synthesis and properties of films in the SiO2-Bi2O3 system

The compositions of film-forming solutions for synthesizing films in the SiO₂-Bi₂O₃ system were determined (10–90 mol % Bi₂O₃). The obtained films are characterized by high dielectric constants (2.43–7.89). It was demonstrated how the quantitative ratio between SiO₂ and Bi₂O₃ in the films and powders affects their phase composition, refractive index, and dielectric constant and the acid-base properties of the surface.     

Cyclocondensation between fatty acid hydrazides and 1,1,1-trifluoro-4-alkoxy-3-alken-2-ones: Introducing a trifluoromethylated head onto fatty acid moieties

This paper reports the regioselective synthesis of new trifluoromethylated lipid derivatives, namely, 1-(5-hydroxy-5-trifluoromethyl-3-alkyl-4,5-dihydro-1H-pyrazol-1-yl)alkan-1-ones, through cyclocondensation reactions between a series of fatty hydrazides (palmitoyl, stearoyl, and oleoyl hydrazides) obtained from fatty acids from renewable resources (1,1,1-trifluoro-4-alkoxy-3-alken-2-ones [F₃CC(O)CH?C(R¹)OR, where R¹?=?H and R?Et; R¹?=?–(CH₂)₆CH₃, –(CH₂)₆CH₃, –(CH₂)₈CH₃, –(CH₂)₉CH₃, –(CH₂)₁₀CH₃, –(CH₂)₁₂CH₃, –(CH₂)₂Ph], and R?Me). Experimental observations showed that the lipophilic characteristic of 5-hydroxy-5-trifluoromethyl-4,5-dihydro-1H-pyrazoles (5–7) prevent the acid catalyzed dehydration to aromatization of 1H-pyrazole ring, although in some cyclocondensations a proportion of the aromatic derivative 1-(5-trifluoromethyl-3-alkyl-1H-pyrazol-1-yl)alkan-1-one was obtained. All products were characterized using multinuclear (¹H, ¹³C, ¹⁹F) NMR spectroscopy.     

Characterization of synthetic and commercial trisiloxane surfactant materials

The organosilicone surfactant Silwet L‐77^® (L‐77), used as an agrochemical adjuvant, is a mixture comprised predominantly of [(CH₃)₃SiO]₂? (CH₃)Si? (CH₂)₃? (OCH₂CH₂)_n? OCH₃ oligomers (n = 3–16, average n ≈ 7.5). The commercially available L‐77 mixture was purified by reversed‐phase high‐performance liquid chromatography (HPLC) to obtain individual trisiloxane surfactant components. Pure oligomers (n = 3, 6 and 9) were also synthesized. Synthesis was achieved by hydrosilylation of monomeric ethoxylate monomethyl ether starting reagents. Pure hexa‐ and nona‐ethylene glycols were produced by condensation of smaller oligomers. Atmospheric‐pressure ionization mass spectrometry (MS) methods were used to characterize fully the commercial L‐77 product and synthesized or isolated components. The application of Fourier‐transform ion cyclotron resonance MS and online HPLC–electrospray ionization MS techniques to the analysis of this surfactant are described here. The application of these analytical techniques also enabled elucidation of the synthetic by‐products present in the commercial formulation. In addition, physico‐chemical properties specific to agrochemical uses, such as droplet spread areas on plant foliage and surface tension for the different oligomer solutions, are also reported. Copyright © 2004 John Wiley & Sons, Ltd.     

The chemical composition and bonding structure of B–C–N–H thin films deposited by reactive magnetron sputtering

The chemical composition and bonding structures of B–C–N–H films fabricated by medium frequency magnetron sputtering, with N₂+CH₄+Ar gas mixture sputtering the boron target, were investigated. XPS and FTIR spectrometric analyses show that the increase of CH₄ flow rate during deposition causes an increase of the C content in the films. The increase in the CH₄ flow rate promotes an increase in the B–C, C–N single and C?N double bonds which are the components of the hybridized B–C–N bonding structure. From the results of Raman spectroscopy analysis, it is seen that the intensity of the D band of the films' Raman spectrum decreases with increasing CH₄ flow rate, indicating a decrease of the sp²‐phase content or the sp² C cluster size. The decreases of I_D/I_G also reflect the formation of more boron‐ or nitrogen‐ bound sp³‐coordinated carbons in the films. Copyright © 2009 John Wiley & Sons, Ltd.     

Theoretical study on the gas phase reaction of acrylonitrile with atomic hydrogen

The complex potential energy surface of the H + CH₂=CHCN reaction has been investigated at the BMC-CCSD level based on the geometric parameters optimized at the BHandHLYP/6-311++G(d,p) level. This reaction is revealed to be one of the significant loss processes of acrylonitrile. The BHandHLYP and M05-2X methods are employed to obtain initial geometries. The reaction mechanism confirms that H can attack on the C=C double bond or C and N atom of –CN group to form the chemically activated adducts IM1 (CH₃CHCN), IM2 (CH₂CH₂CN), IM3′ (CH₂=CHCHN) and IM5 (CH₂=CHCNH), and direct H-abstraction paths may also occur. Temperature- and pressure-dependent rate constants have been carried out using Rice–Ramsperger–Kassel–Marcus theory with tunneling correction. IM1 (CH₃CHCN) formed by collisional stabilization is the major product at the 760 Torr pressure of H₂ and in the temperature range (200–1,600 K); whereas the production of IM2 (CH₂CH₂CN) is the main channel at 1,600–3,000 K. The calculated rate constants are in good agreement with the experimental data.     

[{(CH3)3Si}3C–Li–C{Si(CH3)3}3][Li · 3(OC4H8)] und {(CH3)3Si}3C–Li · O=C(Si(CH3)3)2, zwei neue Addukte des Lithium‐trisylmethanids

[{(CH₃)₃Si}₃C–Li–C{Si(CH₃)₃}₃][Li · 3(OC₄H₈)] and {(CH₃)₃Si}₃C–Li · O=C(Si(CH₃)₃)₂, two New Adducts of Lithium Trisylmethanide Sublimation of (Tsi–Li) · 2 THF (Tsi = –C(Si(CH₃)₃)₃) at 180 °C and 10^–4 hPa gives (Tsi–Li) · 1.5 THF in very low yield. The X‐ray structure determination shows an almost linear [Tsi–Li–Tsi]^– anion connected by short agostic Li…C contacts with the threefold THF‐coordinated Li‐cation. Base‐free Tsi–Li, solved in toluene is decomposed by oxygen, forming the strawberry‐colored ketone O=C(SiMe₃)₂, which forms an 1 : 1 adduct with undecomposed Tsi–Li. The X‐ray structure elucidation of this compound is also discussed.