Pressurized liquid extraction followed by high-performance liquid chromatography for determination of seven active compounds in Cortex Dictamni

A new method based on pressurized liquid extraction (PLE) followed by a sensitive and specific HPLC-DAD analysis is developed for determination of seven compounds in Cortex Dictamni. The operational parameters of PLE, such as extraction solvent, extraction temperature, extraction pressure, static extraction time, flush volume and extraction cycles were optimized, using the extraction efficiencies of dictamnine, obacunone and fraxinellone as targets. The optimized procedure employed MeOH as extraction solvent, 150 degrees C of extraction temperature, 1,500 psi extraction pressure, 5 min of static extraction time, 60% flush volume and the extraction recoveries of the three compounds were nearly to 100% for only one cycle. The following HPLC analysis was performed on a reversed-phase C(18) column with methanol-water as mobile phase in gradient manner, detected at 236 and 218 nm. The limits of detection (LOD) and limits of quantification (LOQ) of the seven compounds were in the range of 0.4-15.6 ng and 1.2-38.8 ng. This assay can be readily utilized as a quality control method for Cortex Dictamni and other related medicinal plants.     

Sensitive determination of herbicides in food samples by nonaqueous CE using pressurized liquid extraction

We have developed a method involving extraction with mixtures of solvents under pressure (pressurized liquid extraction (PLE)) for the determination of triazine herbicides in a series of samples from the food industry. The organic extracts obtained were subjected to a clean-up step with SPE, using Oasis MCX sorbents, after which they were analyzed by NACE. Potato was chosen as a representative matrix of horticultural products since it has a high water content. Spiked potato samples were used to optimize extraction conditions. In order to compare the results obtained with NACE, different studies were also conducted using HPLC. The detection limits in NACE were similar to those found with HPLC and were of the order of 10-15 microg/kg, depending on the analyte. Satisfactory results were obtained on applying the method proposed for the potato matrix (PLE with separation by electrophoresis) to other food matrices such as other tubercles, fruits, vegetables and cereals.     

Quantitative determination of chlorophenols in leather by pressurized liquid extraction and liquid chromatography with diode-array detection

Pressurized liquid extraction (PLE) with acetonitrile was used for the recovery of chlorophenols (4-chloro-3-methylphenol, 4-chloro-2-methylphenol, 2,4-dichlorophenol, 2-phenylphenol, 2,4,6-trichlorophenol, 2,3,4,6-tetrachlorophenol and pentachlorophenol) present as biocides in leather. After a single cycle PLE treatment, solutions underwent pre-concentration by evaporation of the solvent under vacuum and clean-up treatment with solid-phase extraction cartridges. Quantitative analysis of the target compounds was carried out by liquid chromatography with gradient elution and UV spectrophotometric detection at variable wavelength for the various analytes in the range 190-240 nm. Instrumental detection limits and operative detection limits in the real matrices were determined according to the Hubaux-Vos approach and to the US Environmental Protection Agency procedures. The detection limits for the seven analytes ranged from 10 to 70 microg kg(-1). Linearity was very good in the explored range (10(-7)-10(-5)M) giving R(2) values from 0.995 to 1.000 for pentachlorophenol and 2,4-dichlorophenol, respectively. Repeatability was satisfactory, 2-5% for a 1 x 10(-6)M level of concentration, on five repeated measurements on the sample. Recovery yield values with the proposed procedure were determined using spiked samples. Overall recovery ranged from 88 to 97%. The method was used for routine analysis of real leather samples.     

Analysis of fumonisins B(1), B(2) and B(3) in corn-based baby food by pressurized liquid extraction and liquid chromatography/tandem mass spectrometry

A sensitive and reliable method using pressurized liquid extraction (PLE) and liquid chromatography (LC)/electrospray ionization (ESI) tandem mass spectrometry with a triple quadrupole (QqQ) analyzer has been developed for the analysis of fumonisin B(1) (FB(1)), fumonisin B(2) (FB(2)) and fumonisin B(3) (FB(3)) in corn-based baby foods. Influence of several extraction parameters that affect PLE efficiency such as temperature, pressure, solvent extraction, number of cycles and dispersant/clean-up agents were studied. The selected PLE operating method was: 3g of sample was packed into 11 ml stainless-steel cell and fumonisins were extracted with methanol at 40 degrees C, 34 atm in one cycle of 5 min at 60% flush. The analytes were ionized in ESI operating with positive ion mode and identified by selecting two monitoring transitions, permitting quantification and confirmation in a single injection. Recoveries ranged from 68% to 83% at fortification levels of 200 microg kg(-1) with relative standard deviation (RSD) from 4% to 12%. The limits of quantification were from 2 microg kg(-1) for FB(1) and FB(2), and 5 microg kg(-1) for FB(3), which are below the maximum residue level established by the European Union legislation in infant formulas. The proposed method was successfully applied to the analysis of twenty seven samples of baby food products collected from different markets, and one positive sample with a content of 15.9 microg kg(-1) for FB(1), 9.2 microg kg(-1)for FB(2) and 5.8 microg kg(-1) for FB(3) was obtained. Given the simplicity and potential of the proposed procedure, its application for safety control is recommended.     

Development of a pressurised liquid extraction and liquid chromatography with electrospray ionization-tandem mass spectrometry method for the determination of domoic acid in shellfish

Amnesic shellfish poisoning (ASP) is a potentially lethal human toxic syndrome which is caused by domoic acid (DA) that originates in marine phytoplankton belonging to the Pseudonitzschia genus. A confirmatory and sensitive procedure has been developed and validated for the determination of DA in shellfish. The proposed method includes pressurised liquid extraction (PLE) with methanol/acetone (9:1), florisil clean-up purification inside the PLE extraction cell and detection by liquid chromatography (LC) coupled to electrospray ionization in positive mode tandem mass spectrometry (ESI-MS-MS). Comparison of ionization sources (ESI, atmospheric pressure ionization (APCI) atmospheric pressure photoionization (APPI) and combined APCI/APPI) were carried out in order to improve the analytical signal. The main parameters affecting the performance of the different ionization sources and PLE parameters were previously optimised using statistical design of experiments (DOE). Linear calibrations were obtained using mussel tissue extracts 0.05-5 microg DA/ml (R2>0.999). The limits of detection (LOD) and quantitation (LOQ) of the method were 0.2 and 0.5 microg/g respectively and recoveries ranged from 81 to 95%. This method was successfully applied to determine DA levels in 46 shellfish samples collected from Valencian (Spain) supermarkets, showing high sample throughput.     

固相萃取-微乳液相色谱法测定环境水体中的3种酚类化合物

建立了固相萃取-微乳液相色谱法同时测定环境水体中的苯酚、双酚A (BPA)、2,4-二氯苯酚3种酚类化合物的检测方法。水样加酸酸化后,经C18固相萃取小柱富集净化,用微乳液相色谱法测定3种目标物的含量。在Inertsil C18色谱柱(150 mm×4.6 mm, 5 μm)上以微乳(3.0%十二烷基硫酸钠(SDS)-6.0%正丁醇-0.8%正庚烷-90.2%(水+0.5%HAc))和乙腈作为流动相进行梯度洗脱,流速1.0 mL/min,检测波长280 nm。结果表明,苯酚、双酚A、2,4-二氯苯酚的检出限(S/N=3)依次为0.74、8.0、8.0 μg/L,线性范围在0.1~10 mg/L范围内,相关系数(r)均大于0.999。将3种酚类化合物定量加到空白水样中,苯酚、双酚A、2,4-二氯苯酚的加标回收率分别为82.7%、87.8%、82.6%,其RSD均小于5%(n=6)。对环境水样的酚类化合物分析也取得了良好的加标回收率,其值均在85.7%~113.2%之间。结果表明,该方法准确可靠、灵敏度高,适用于环境水体中酚类化合物的检测。     

Simultaneous determination of the endocrine disrupting compounds nonylphenol, nonylphenol ethoxylates, triclosan and bisphenol A in wastewater and sewage sludge by gas chromatography-mass spectrometry

An integrated analytical method for the simultaneous determination of 4-n-nonylphenol (4-n-NP), nonylphenol monoethoxylate (NP1EO), nonylphenol diethoxylate (NP2EO), bisphenol A (BPA) and triclosan (TCS) in wastewater (dissolved and particulate phase) and sewage sludge was developed based on gas chromatography-mass spectrometry. Chromatographic analysis was achieved after derivatization with bis(trimethylsilyl)trifluoroacetamide (BSTFA). Extraction from water samples was performed by solid-phase extraction (SPE). The optimization of SPE procedure included the type of sorbent and the type of the organic solvent used for the elution. Referred to solid samples, the target compounds were extracted by sonication. In this case the optimization of the extraction procedure included the variation of the amount of the extracted biomass, the duration and the temperature of sonication and the type of the extraction organic solvent. The developed extraction procedures resulted in good repeatability and reproducibility with relative standard deviations (RSDs) less than 13% for all the tested compounds for both types of samples. Satisfactory recoveries were obtained (>60%) for all the compounds in both liquid and solid samples, except for 4-n-NP, which gave recoveries up to 35% in wastewater samples and up to 63% in sludge samples. The limits of detection (LODs) of the target compounds varied from 0.03 (4-n-NP) to 0.41 microg l(-1) (NP2EO) and from 0.04 (4-n-NP) to 0.96 microg kg(-1) (NP2EO) for liquid and solid samples, respectively. The developed methods were successfully applied to the analysis of the target compounds in real samples.     

Multi-class determination of antimicrobials in meat by pressurized liquid extraction and liquid chromatography-tandem mass spectrometry

A multi-residue method using pressurized liquid extraction (PLE) and liquid chromatography-tandem mass spectrometry (LC-MS/MS) has been developed for determining trace levels of 31 antimicrobials, including beta-lactams, lincosamides, macrolides, quinolones, sulfonamides, tetracyclines, nitroimidazoles and trimethoprim. The extraction method required pre-homogeneization of the meat with EDTA-washed sand and subsequent one-static-cycle extraction for 10 min with 40 ml of water at 1500 psi and 70 degrees C. The effect of operation temperature, pressure, flush volume, and static cycles on PLE performance was studied. Average recoveries ranged from 75 to 99% with relative standard deviations <18%. The method was validated according to the European Union requirements (2002/657/EC). In addition to the quality parameters included in that decision, the limits of detection (LODs) and quantification (LOQs) were determined. The use of LC-MS/MS provided LODs (between 3 and 15 microg kg(-1)) and LOQs (between 10 and 50 microg kg(-1)), by far lower than half of their maximum residue limits (MRLs) (between 50 and 1200 microg kg(-1)). Confirmation of the presence of any of the studied compounds was accomplished in 1h after sample receipt. This methodology has been successfully applied to the analysis of cattle and pig tissue samples from local markets and slaughterhouses of the Valencian Community (Spain). The results showed the presence of some antimicrobials at different concentrations. Quinolones and tetracyclines were the antimicrobials most detected in cattle and pig samples, respectively. Sulfonamides were also frequently detected in both types of samples.     

Pressurised liquid extraction of flavonoids in onions. Method development and validation

A rapid and reliable analytical method for quantification of flavonoids in onions was developed and validated. Five extraction methods were tested on freeze-dried onions and subsequently high performance liquid chromatography (HPLC) with UV detection was used for quantification of seven flavonoids.The extraction efficiencies were lowest for the conventional water bath extraction compared to pressurized liquid extraction (PLE), ultrasonication, ultrasonic liquid processor, and microwave extraction, which yielded similar efficiencies. The reproducibility was in the same range (RSD: 1-11%) for all tested extraction methods. However, PLE was the preferred extraction method because the method can be highly automated, use only small amounts of solvents, provide the cleanest extracts, and allow the extraction of light and oxygen-sensitive flavonoids to be carried out in an inert atmosphere protected from light.The method parameters: extraction temperature, sample weight, flush volume and solvent type were optimised, and a clean-up step was integrated in the PLE procedure by in-cell addition of C18-material to the extraction cells, which slightly improved the recovery and reproducibility of the method. The one-step PLE method showed good selectivity, precision (RSDs = 3.1-11%) and recovery of the extractable flavonoids (98-99%). The method also appeared to be a multi-method, i.e. generally applicable to, e.g. phenolic acids in potatoes and carrots.     

Pressurized liquid extraction and microwave-assisted extraction in the determination of organochlorine pesticides in fish muscle samples

This paper describes a comparative study of 2 extraction methods, pressurized liquid extraction (PLE) and microwave-assisted extraction (MAE), for the determination of organochlorine pesticides (OCPs) in fish muscle samples. In both cases, samples were extracted with hexane-acetone (50 + 50), and the extracts were purified by solid-phase extraction using a carbon cartridge as the adsorbent. Pesticides were eluted with hexane-ethyl acetate (80 + 20) and determined by gas chromatography with electron-capture detection. Both methods demonstrated good linearity over the range studied (0.005-0.100 microg/mL). Detection limits ranged from 0.029 to 0.295 mg/kg for PLE and from 0.003 to 0.054 mg/kg for MAE. For most of the pesticides, analytical recoveries with both methods were between 80 and 120%, and the relative standard deviations were < 10%. The proposed methods were shown to be powerful techniques for the extraction of OCPs from fish muscle samples. Although good recovery rates were obtained with both extraction methods, MAE provided advantages with regard to sample handling, cost, analysis time, and solvent consumption. Acceptable validation parameters were obtained although MAE was shown to be more sensitive than PLE.     

Determination of N-nitroso derivatives of hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX) in soils by pressurized liquid extraction and liquid chromatography-electrospray ionization mass spectrometry

To aid in the evaluation of the potential toxicity of N-nitroso derivatives of hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX), we describe a pressurized liquid extraction (PLE) followed by liquid chromatography-electrospray ionization-mass spectrometry (LC-ESI-MS) method for determination of RDX and its N-nitroso derivatives: hexahydro-1-nitroso-3,5-dinitro-1,3,5-triazine (MNX), hexahydro-1,3-dinitroso-5-nitro-1,3,5-triazine (DNX), and hexahydro-1,3,5-trinitroso-1,3,5-triazine (TNX) in soils. Sandy loam soil was spiked with RDX and its N-nitroso derivatives (MNX, DNX, and TNX). Acetonitrile was used as the PLE extraction solvent at 100 degrees C and 1500 psi for 15 min. Florisil was used to cleanup extracts following PLE. Instrumental analysis employed LC-ESI-MS, in which 1mM acetic acid was added to the mobile phase to facilitate formation of acetate adduct ions [M+CH(3)COO](-). The method detection limits (MDLs) for RDX, MNX, DNX, and TNX were 1.46, 1.46, 1.69, and 1.93 ng/g, respectively. High recovery (91.1-108.3%), good precision (RSD: 3.2-12.4%), and reproducibility were achieved. This method proved effective and was applied to monitor the reductive biotransformation of MNX in soils with the presence of earthworms (Eisenia fetida).     

Determination of chlormequat and mepiquat in pear,tomato, and wheat flour using on-line solid-phase extraction (Prospekt) coupled with liquid chromatography-electrospray ionization tandem mass spectrometry

A new methodology based on pressurized liquid extraction (PLE) followed by LC-MS is presented for the simultaneous and unequivocal determination of alkylphenol ethoxylates (APEOs) and their degradation products, alkylphenols (APs) and alkylphenoxy carboxylates (APECs), in sediment samples. The protocol, applicable to a full range of APEO oligomers and degradation products, permits the sensitive and selective determination of APEOs (nEO = 1-15), APECs (nEO = 0-1) and APs at low ppb levels (LODs = 1-5 microg/kg) in sediment samples. Optimization of the operational parameters of PLE clearly demonstrates that significant thermal losses of APs occur during extraction at elevated temperatures. The loss of octylphenol (OP) at 100 degrees C was 61.2% and of nonylphenol (NP) 40.0%, whereas other compounds were completely recovered. Thus, to avoid losses due to the volatility of alkylphenols, a low extraction temperature should be applied. The conditions that gave the best results for all target compounds were as follows: extraction solvent mixture, methanol-acetone (1:1, v/v); temperature, 50 degrees C; pressure, 1500 p.s.i.; two static cycles. Using PLE and a subsequent clean-up with solid-phase extraction (SPE), the simultaneous extraction of APEOs, APs and APECs from sediment samples was achieved yielding recoveries >70% and producing low MS background noise. The developed methodology was applied on a routine basis to the analysis of alkylphenolic compounds in sediment samples. APEOs and their persistent degradation products were detected in significant concentrations in sediments from Portuguese rivers, especially at sites situated in the proximity of industrial plants (mainly the textile industry). The total concentration of alkylphenolic compounds (APEOs+APs+APECs) ranged from 155 to 2400 microg/kg. Of all the alkylphenolic compounds, NP comprised 40 to 50% with concentrations up to 1172 microg/kg.     

Simultaneous determination of phenolic xenoestrogens by solid-phase extraction and high-performance liquid chromatography with fluorescence detection.

A highly sensitive and selective method for simultaneous determination of some hydroxyl group-containing endocrine disruptors, including bisphenol A (BPA), bisphenol B (BPB), bisphenol E (BPE), bisphenol F (BPF) and 4-nonylphenol (4-NP), was developed. The method consists of precolumn derivatization of the analytes, solid-phase extraction (SPE) and subsequent chromatographic analysis by high-performance liquid chromatography (HPLC) with fluorescence detection. 4,4'-Cyclohexylidenebisphenol (BPZ) was used as an internal standard. Derivatization was carried out using 4-(4,5-diphenyl-1H-imidazol-2-yl)benzoyl chloride (DIB-Cl) as a label. Parameters of the derivatization reaction (temperature, time, concentration of reagent, stability, etc.) and of the solid-phase extraction (recovery, solvent, etc.) were studied in detail. Detection limits of compounds studied in standard solutions ranged from 0.08-1.3 ppb (ng/ml). The proposed method was successfully applied to plastic samples; BPA was found in both polycarbonate and polyvinyl chloride plastics, while 4-NP was found in plastics made of polyvinyl chloride and another polymer.     

Determination of natural and synthetic estrogens and their conjugates in sewage sludge by pressurized liquid extraction and liquid chromatography-tandem mass spectrometry

In this study we present a pressurized liquid extraction/liquid chromatography-tandem mass spectrometry (PLE/LC-MS-MS) method to determine a group of estrogens and conjugated estrogens in sewage sludge. Parameters that affect the extraction step such as extraction solvent, temperature, pressure, static extraction time, number of cycles, purge time and flush volume have been optimized. In the LC-MS-MS system, electrospray ionization and a triple quadrupole analyzer have been used, and the multiple reaction monitoring mode has enabled low levels of target analytes to be detected. All recoveries were higher than 81% except for estrone 3-glucoronide and estradiol 17-glucoronide which were not extracted and consequently, they were not considered in the present study. The repeatability and reproducibility between days expressed as %RSD (n=3), were lower than 6% and 9%, respectively. The method developed allowed the target analytes to be quantified at low levels of microg/kg. The limits of detection were lower than 26 microg/kg of dry weight (d.w.) of sewage sludge, except for 17 alpha-estradiol, 17beta-estradiol, 17 alpha-ethinylestradiol and estradiol 17-acetate whose values were between 150 and 175 microg/kg (d.w.). The method was applied to determine these compounds in sewage sludge from two domestic sewage treatment plants. Estrone 3-sulfate, estradiol 3-sulfate, diethylstilbestrol, estrone and estriol were determined in some samples and estriol showed the highest value (406 microg/kg d.w.).     

Determination of nitroimidazoles and their metabolites in swine tissues by liquid chromatography

A liquid chromatographic method was developed for determination of metronidazole (MNZ), ronidazole (RNZ), dimetridazole (DMZ), and 2-hydroxymethyl-1-methyl-5-nitroimidazole (DMZOH) in swine tissue. After extraction with ethyl acetate and evaporation, the nitroimidazoles were redissolved in hydrochloric acid. Hexane was used in the liquid-liquid extraction to remove fat. An Oasis HLB solid-phase extraction was performed after neutralization of the acidic extract. The limits of detection were 1.0-2.0 microg/kg for DMZOH, MNZ, RNZ, and DMZ in muscle and liver. Average recoveries ranged from 80.1 to 83.9% in muscle fortified at 10, 20, and 50 microg/kg; average recoveries in liver ranged from 78.9 to 82.3%. The procedure provides a simple and sensitive method for monitoring DMZOH, MNZ, RNZ, and DMZ residues in swine tissues.     

Miniaturised selective pressurised liquid extraction of polychlorinated biphenyls from foodstuffs

The feasibility of miniaturised pressurised liquid extraction (PLE) with in-cell purification and subsequent gas chromatography with micro-electron capture detection (GC-micro-ECD) for the determination of prioritary and toxic polychlorinated biphenyls (PCBs) in a variety of foodstuffs (fat contents in the range 22-49%, w/w, on a freeze-dried basis) has been investigated. After optimisation of the several experimental parameters affecting the efficiency of the selective PLE process, the developed method provided quantitative recoveries of the endogenous PCBs studied and complete fat elimination in a single step using n-hexane as extraction solvent. A total solvent volume of 3.5 mL was used for the two consecutive 7 min static PLEs of 100-mg samples. Detection limits using GC-micro-ECD were below 0.2 ng/g freeze dried sample for all 22 PCBs investigated in real-life foodstuffs, and the repeatability of the complete PLE plus GC-micro-ECD method as calculated for the analysis of the endogenous PCBs in general was better than 14%. Comparison of the miniaturised PLE method developed with either conventional Soxhlet extraction or matrix solid phase dispersion with subsequent (off-line) clean-up for the analysis of non-spiked samples showed that the efficiency of PLE was similar to or better (recoveries in the range 83-133%, as calculated for the endogenous analytes) than for the other two extraction methods assayed.     

Analysis of pesticides in fruits by pressurized liquid extraction and liquid chromatography-ion trap-triple stage mass spectrometry

A multi-residue method using pressurized liquid extraction (PLE) and liquid chromatography-quadrupole ion trap-triple stage mass spectrometry (LC-IT-MS(3)) has been developed for determining trace levels of pesticides in fruits. The selected pesticides can be distinguished in: benzimidazoles and azoles, organophosphorus, carbamates, neonicotinoids, and acaricides. PLE has been optimized to extract these pesticide residues from oranges and peaches by studying the effect of experimental variables on PLE efficiency. Samples were extracted at high temperature and pressure (75 degrees C and 1500psi) using ethyl acetate as extraction solvent and acidic alumina as drying agent. The recoveries obtained by PLE ranged from 58% to 97% and the relative standard deviation (RSDs) from 5% to 19%. The limits of quantification (LOQs) of the compounds were from 0.025 to 0.25mgkg(-1), which are well-below the maximum residue limits (MRLs) established by the European Union (EU) and the Spanish legislations.     

Active single-drop microextraction for the determination of gaseous diisocyanates

Heterocyclic amines (HAs) were analysed in meat extract samples using a new method based on pressurised liquid extraction (PLE) and liquid chromatography-tandem mass spectrometry. This method combines the use of a pressurised fluid with a triple quadrupole MS/MS system, resulting in benefits from both systems: high extraction efficiency and sensitivity. The effects of solvent type and PLE operational parameters, such as temperature and extraction time, were studied to obtain maximum recovery of the analytes with minimum contamination. HA extraction was best achieved using dichloromethane/acetone (50/50, v/v) at 80 degrees C for 10 min. Recoveries ranged from 45% to 79% with good quality parameters: limit of detection values between 0.02 and 1 ng g(-1), linearity (r(2)>0.997), and run-to-run and day-to-day precisions with relative standard deviations lower than 13% achieved at both low (0.20 microg g(-1)) and medium (1.0 microg g(-1)) concentrations. This method reduces sample manipulation and total extraction time by nearly four-fold compared to conventional solid phase extraction. The optimised method was validated using laboratory reference material based on a meat extract, and was successfully applied to HA analysis in several cooked beef samples.     

Simultaneous pressurized liquid extraction and clean-up for the analysis of polybrominated biphenyls by gas chromatography-tandem mass spectrometry

This paper describes a fast and simple pressurized liquid extraction (PLE) method combined with gas chromatography coupled to ion trap tandem mass spectrometry (GC-ITMS-MS) for the determination of polybrominated biphenyls (PBBs) in fish samples. The method is based on a simultaneous extraction/clean-up step to reduce analysis time and solvent consumption. The effect of several PLE operating conditions, such as solvent type, extraction temperature and time, number of cycles, and lipid retainer, was optimized to obtain maximum recovery of the analytes with the minimum presence of matrix-interfering compounds. The best conditions were obtained at 100 °C with n-hexane using 15 g of silica modified with sulphuric acid (44%, w/w) as sorbent for lipid removal. Quality parameters of the GC-ITMS-MS method were established, achieving good linearity (r > 0.998), between 1 and 500 ng ml⁻¹, and low instrumental limits of detection (0.14-0.76 pg injected). For the whole method, limits of detection ranging from 0.03 to 0.16 ng g⁻¹ wet weight and good precision (RSD < 16%) were obtained.     

液相色谱-三重串联四极杆质谱测定粮油中的黄曲霉毒素

建立了超声提取-液相色谱-电喷雾三重串联四极杆质谱测定玉米、大米、大豆等粮油固体样品中黄曲霉毒素B1、B2、G1和G2(AFB1、AFB2、AFG1和AFG2)的方法。分析前对样品进行超声提取,优化得到最佳超声提取条件: 溶剂为甲醇-水(含40 g/L NaCl) (80:20, v/v)溶液、料液比为1:3(g:mL)、温度为50 ℃、时间为3 min。然后对提取的样品进行免疫亲和特异性净化。最后与液相色谱-电喷雾三重串联四极杆质谱联用,使用C18反相色谱柱,流动相为甲醇-10 mmol/L乙酸铵水溶液梯度洗脱,以黄曲霉毒素M1(AFM1)作为内标进行定量测定。结果表明,AFB1、AFB2、AFG1和AFG2的检出限分别为0.002、0.004、0.004和0.012 μg/kg。方法的加标回收率为87%～111%,日内相对标准偏差(RSD)和日间RSD分别不大于6.7%和5.6%。实验结果表明该方法可以有效地降低基质效应的影响,相比于外标法能极大地提高方法的准确度。