Spectroscopic, semiempirical and X-ray structural study of the 2:1 complex of a cyclic diamide of o-phthalic acid with water molecule

Cyclic diamide of o-phthalic acid with 3,6-dioxa-octyl-1,8-diamine (CPhDA) was synthesised by a new method and its hydrate structure has been studied by X-ray diffraction, FT-IR, NMR and PM5 semiempirical methods. The crystal of this compound is orthorhombic, space group Pbcn, with a = 16.7033(11), b = 8.8823(5), c = 19.6182(12) and Z = 8. The IR spectrum of the crystal is consistent with the results obtained by the X-ray study and provides spectroscopic evidence for the formation of the H-bonded complex with water molecules. The calculated structure of the complex and the structural parameters are comparable with those determined by the X-ray method.     

Separation of perfluoroalkylsulfinic acids and perfluoroalkylsulfonic acids by ion-exclusion chromatography

Ion-exclusion chromatography has been successfully applied to the separation of a number of perfluoroalkylsulfinic acids and perfluoroalkylsulfonic acids. The separation of various perfluoroalkylsulfinic and perfluoroalkylsulfonic acids, with different alkyl groups, was investigated on a polymethacrylate-based, weakly acidic, cation-exchange resin (TSK gel OApak-A) in the H⁺-form and using conductimetric detection. When water was used as the eluent, these perfluoroalkylsulfinic and perfluoroalkylsulfonic acids could not be resolved. When an aqueous solution of benzoic acid and o-phthalic acid was used, the separation of each of these acids occurred. In order to improve their separation, the effect of the addition of methanol and 2,2,2-trifluoroethanol, as organic modifiers, was also investigated.     

Flow-injection fluorimetric analysis of sulfamethoxazole in pharmaceutical preparations and biological fluids

A fluorimetric procedure for the determination of sulfamethoxazole using flow injection analysis is proposed. A two channel system is optimized for the fluorescent reaction with o-phthaldialdehyde and β-mercaptoethanol. The detection limit is 0.007 μg/ml. No fluorescence is generated by the metabolite N-acetylated sulfamethoxazole. The method is applied to the determination of sulfamethoxazole in pharmaceuticals, urine and bovine serum samples without matrix interference problems.     

Spectrophotometric simultaneous determination of nitroaniline isomers by orthogonal signal correction-partial least squares

The simultaneous determination of nitroaniline isomer mixtures by using spectrophotometric methods is a difficult problem in analytical chemistry, due to spectral interferences. By multivariate calibration methods, such as partial least squares (PLS), it is possible to obtain a model adjusted to the concentration values of the mixtures used in the calibration range. Orthogonal signal correction (OSC) is a preprocessing technique used for removes the information unrelated to the target variables based on constrained principal component analysis. OSC is a suitable preprocessing method for partial least squares calibration of mixtures without loss of prediction capacity using spectrophotometric method. In this study, the calibration model is based on absorption spectra in the 200–500 nm range for 21 different mixtures of nitroaniline isomers. Calibration matrices were containing 1–21, 1–15 and 1–18 μg ml⁻¹ of m-nitroaniline, o-nitroaniline and p-nitroaniline, respectively. The RMSEP for m-nitroaniline, o-nitroaniline and p-nitroaniline with OSC and without OSC were 0.6567, 0.2692, and 0.3134, and 1.3818, 1.2181, and 0.3953, respectively. This procedure allows the simultaneous determination of nitroaniline isomers in real matrix samples and good reliability of the determination was proved.     

Vacancy spectroscopy of radiation cross-linked and degraded polytetrafluoroethylenes

Polytetrafluoroethylene samples having different morphology were prepared by radiation induced cross-linking and degradation, and positron annihilation lifetimes were measured to extract information about the vacancy structure from the orth-positronium (o-Ps) component. The o-Ps intensity I₃ was inversely correlated with the crystallinity confirming that this component is associated with the amorphous part. The o-Ps lifetime τ₃ was distinctly different depending on the phase of the polymer. Below the γ relaxation temperature, the vacancies produced by degradation could be seen from an increase in the τ₃ value, but at temperatures between the γ and β relaxations such vacancies became invisible due to the activated segment motion. And above the β relaxation temperature vacancies in the interface between crystalline and amorphous parts appear to affect τ₃. The o-Ps intensity did not show stable reproducible results. Accumulation of positive charge can be responsible for it. The results, not only unveiling the not yet well understood behavior of the o-Ps component, demonstrate the uniqueness of the vacancy spectroscopy using o-Ps as a probe.     

Penicillamine determination using a tyrosinase micro-rotating biosensor

Tyrosinase [EC 1.14.18.1], immobilized on a rotating disk, catalyzed the oxidation of catechols to o-benzoquinone, whose back electrochemical reduction was detected on glassy carbon electrode surface at −150 mV versus Ag/AgCl/NaCl 3 M. Thus, when penicillamine (PA) was added to the solution, this thiol-containing compound participate in Michael type addition reactions with o-benzoquinone to form the corresponding thioquinone derivatives, decreasing the reduction current obtained proportionally to the increase of its concentration. This method could be used for sensitive determination of PA in drug and human synthetic serum samples. A linear range of 0.02–80 μM (r = 0.999) was obtained for amperometric determination of PA in buffered pH 7.0 solutions (0.1 M phosphate buffer). The biosensor has a reasonable reproducibility (R.S.D. < 4.0%) and a very stable amperometric response toward this compound (more than 1 month).     

Enzymatic determination of phenols using peanut peroxidase

The influence of phenol and its derivatives on the kinetics of oxidation of aryldiamines (indicator-substrates) catalyzed by novel plant peroxidase—cationic peanut peroxidase—was studied. The character of influence of phenols on the kinetics of enzymatic oxidation of benzidine, o-dianisidine, and 3,3′,5,5′-tetramethylbenzidine (TMB) with hydrogen peroxide was found to depend on a correlation between redox properties of phenols and the indicator-substrate of peroxidase. Thus, the catalytic activity of peanut peroxidase is inhibited by phenols with redox potentials higher than that of aryldiamines mentioned above, whereas phenols with potentials below those of aryldiamines, play the role of second substrates of the enzyme. The enzymatic procedures for the determination of numerous phenols on the level of their concentrations 0.05–80 μM were developed using the reactions of benzidine, o-dianisidine, and TMB oxidation. Different analytical signals—the indicator reaction rate and the induction period duration—were used for the determination of phenols, belonging to various groups—the inhibitors and second substrates of the enzyme, respectively.     

The reactions of oxindoles and isatin with nitrobenzyl chlorides Formation of 2′-hydroxy-spiro[2H-indole-2,3′-3′H-indole]

Oxindole reacts with p-nitrobenzyl chloride ot give 3-(4′-nitrobenzyl) oxindole, but with o-nitrobenzyl chloride abnormal product, 2′-hydroxy-spiro[2H-indole-2,3′-3′H-indole] (Vb) is produced. The structure of Vb has been elucidated on the basis of the IR, UV and mass spectra, and confirmed by the analogous reactions of 3-methyl-, 4-methyl- and 3,3-dimethyloxindoles with o-nitrobenzyl chloride. Isatin reacts with o-nitrobenzyl chloride to give o-nitrobenzyloxireno[,3]-oxindole (X).     

Spectrophotometric determination of molybdenum in steels with o-nitrophenylfluorone and cetyltrimethylammonium bromide

A method has been developed for determining microamounts of molybdenum(VI) in aqueous solution by means of the Mo-o-nitrophenylfluorone—cetyltrimethylammonium bromide system, in which micellar solubilization is applied. A red complex is formed in 0.2–0.6M hydrochloric acid medium. The sensitivity of the method is high, and the apparent molar absorptivity is 1.55 × 10⁵ l.mole⁻¹. cm⁻¹. The absorption peak of the complex appears at 530 nm. The colour of the complex develops quickly and is stable for more than 24 hr. The composition of the complex is Mo: o-NPF = 1:1, and the system obeys Beer's law in the range 0–10 μg of Mo per 25 ml. The method has been used for the rapid determination of molybdenum in alloy steels with satisfactory results.     

Ozonolysis of naphthoquinones—I Ozonolysis of 1:4-naphthoquinone in chloroform

During ozonisation of 1:4-naphthoquinone in chloroform at −5 to −8° about 70 per cent undergoes anomalous ozonolysis forming phenylglyoxal-o-carboxylic acid and probably carbon monoxide. The remaining 30 per cent forms a normal ozonide which rearranges to a mixed anhydride of formic acid and phenylglyoxal-o-carboxylic acid. Sodium iodide reduction of the normal ozonide produces o-phenylenediglycolaldehyde. An intramolecular benzoin condensation of this substance is discussed.     

Intramolecular catalysis—V Neighboring group facilitation in the esterification of o-hydroxyphenoxyacetic acid

Evidence is presented for the view that acid-catalyzed esterification of the carboxyl group of o-hydroxyphenoxyacetic acid is facilitated by the neighboring phenolic hydroxyl group, and that the facilitated esterification proceeds via formation of the intermediate γ-lactone.     

Proton magnetic resonance spectra and the intramolecular hydrogen bonding of o-alkoxy- phenols and -benzenethiols

The PMR spectra of several methoxy substituted benzenethiols and related phenols have been examined in various solvents over a wide range of concentrations. The positions of the sulfhydryl proton resonance signals (δ_SH) of o-methoxybenzenethiol and 2,6-dimethoxybenzenethiol in inert solvents, and the δ_SH values of the thiols carrying o-OMe groups are less affected by the interaction with the solvents than those without o-OMe groups. The significant differences in the behaviour of chemical shifts of these compounds have been best interpreted by the intramolecular S---HO H-bonding. Additional evidence for the intramolecular H-bonding in o-OMe substituted benzenethiols have been obtained from the IR spectroscopic data.     

The temperature dependence of the two positronium bubble states in liquid SF6

Positron lifetime measurements have been performed on liquid SF₆ in the temperature range from −45°C to 71°C (T_c = 45.65°C). The positron lifetime spectra were resolved into four lifetime components. In the order of increasing lifetimes the four lifetime components are associated with the decay of para-positronium (p-Ps), free positrons, ortho-positronium (o-Ps) from a small bubble state, and o-Ps from a large bubble state. The lifetime of o-Ps annihilating from the large bubble state τ₄ increases from 5.7 ns at −45°C to 19.5 ns at 53°C. The lifetime of o-Ps annihilating from the small bubble state τ₃ was found to be 2–2.5 ns in the main part of the temperature range studied. Apparently, this is the first observation of two different o-Ps states in a liquid. The intensity I₄ (I₃) increases (decreases) from 16.9% (16%) at −45°C to 47.2% (6.4%) at the critical point while above I₃ and I₄ are essentially temperature independent. The large Ps bubble state seems to be similar to the Ps bubble state found in most liquids.     

The effect of temperature on the solubility of benzoic acid derivatives in water

Using a laser monitoring observation technique, solubilities of o-nitro-benzoic acid, p-hydro-benzoic acid, p-methyl-benzoic acid and m-methyl-benzoic acid in water have been measured in the temperature range 290.15–323.15 K. The experimental data are regressed with the Wilson equation and the λH equation. The experimental results show that solubilities of these compounds in the range of 10⁻⁴–10⁻⁵ mole fraction in water, increase significantly with temperature. Except for o-nitro-benzoic acid, the solubility data are described adequately with the Wilson equation. The λH equation gives good agreement with all experimental data. The results indicate that the molecular structure and interactions affect the solubilities significantly.     

Redox reactions of 2-hydroxy-3-methoxybenzaldehyde (o-vanillin) in aqueous solution

Pulse radiolysis technique has been employed to study the reactions of oxidizing (^√OH, N₃^√) and reducing radicals (e⁻_aq, CO₂^√−, acetone ketyl radical) with 2-hydroxy-3-methoxybenzaldehyde (o-vanillin) at different pH. Hydroxyl radicals react mostly by addition reaction forming radical adducts (λ_max=420 nm) and the oxidation is only a minor process even in the alkaline region. The reaction with azide radicals produced phenoxyl radicals (λ_max=340 nm), which are formed on fast deprotonation of solute radical cation. Using PMZ^√+/PMZ and ABTS^√−/ABTS²⁻ as the reference couple, different methods are employed to determine the one-electron reduction potential of o-vanillin and the average value is estimated to be 1.076±0.004 V vs. NHE at pH 6. The phenoxyl radicals of o-vanillin were able to oxidize ABTS²⁻ quantitatively. The e_aq⁻ is observed to react with o-vanillin with rate constant value of 2×10¹⁰ dm³ mol⁻¹ s⁻¹. CO₂^√− and acetone ketyl radical are also observed to react with o-vanillin by electron transfer mechanism and showed the formation of transient absorption bands with λ_max at 350 and 390 nm at pH 4.5 and 9.7, respectively. The pK_a of the one-electron reduced species was determined to be 8.1. The results indicate that the aldehydic group is the most preferred site for electron addition.     

Substituent effects on the frontier molecular orbitais of aryl isonitriles

An investigation of the frontier molecular orbitais ofo- and p-RC₆H₄NC (R=H, CH₃, NO₂, F, Cl, CF₃, OCH₃) was carried out so that a thorough understanding of the intricacies of σ donation and π acceptance could be developed and used to modify subtly the electron density on metal centers. The results of this study-Indicate that the substituent position (ortho vs. para ) does alter the electron density in the ligand appreciably and that substitution of the phenyl ring with the groups indicated has a smaller effect on the σ-donating ability than it does on the π-accepting ability of the isonitrile ligand.

The π-accepting abilities of the isonitrile ligands increase in the order o-, p-CH₃OC₆H₄NC, o-, p-CH₃C₆H₄NC, o-, p-C₆H₅NC, o-, p-FC₆H₄NC, o-, p-CF₃C₆NC, o-, p-ClC₆H₄NC, o-, p-NO₂C₆H₄NC while the σ-donating ability decreases in this order. The energies of the σ-donor and π-acceptor orbitais are shown to correlate well with observed E values of Cr(RC₆H₄NC)₆ and Mn(RC₆H₄NC)₆⁺¹ complexes. This demonstrates how the theoretical results can be useful in understanding the observed physical properties of isonitrile-metal complexes.     

A new selective method for dimethylamine in water analysis by liquid chromatography using solid-phase microextraction and two-stage derivatization with o-phthalaldialdehyde and 9-fluorenylmethyl chloroformate

A new method is presented for the determination of DMA in water as its 9-fluorenylmethyl chloroformate (FMOC) derivative using solid-phase microextraction (SPME) and liquid chromatography. The method is based on the employment of SPME fibres coated with carbowax-templated resin (CW-TR) for analyte extraction and derivatization. The fibres were successively immersed in the samples, in a solution of o-phthalaldialdehyde and N-acethyl-l-cysteine (OPA–NAC) and finally, in a solution of FMOC. OPA–NAC reacted on the fibre with possible primary aliphatic amines present in the samples, particularly with PA which is a direct interferent in the determination of DMA with FMOC. In such a way, the formation of PA–FMOC during the second stage was prevented, and thus the method was selective for DMA. The proposed procedure was applied to the determination of DMA in the 1.0–10.0 μg/mL range. The method provided suitable linearity, accuracy and reproducibility, and limits of detection and quantification of 0.3 and 1.0 μg/mL, respectively. The applicability of the method for the determination of DMA in different types of water is shown.     

Positronium as a probe of sorption mechanism in polytetrafluoroethylene

As one of the series of works of application of positron annihilation technique to the study of sorption of polymers, sorption of CO₂ and CH₄ into polytetrafluoroethylene has been measured. The lifetimes of the two o-Ps states, τ₃=1.6 ns and τ₄=4 ns in vacuum, were increased with the charged gas pressure. The intensity of the longer lived component, I₄, was decreased showing that the sorbed molecules and o-Ps are competing for the free volume sites in the amorphous parts. The intensity of the shorter lived component, I₃, did not decrease substantially. From these results it is concluded that the τ₃ component corresponds to o-Ps annihilating in the interphase region between the crystalline and amorphous parts. It has also been deduced from the results that positronium increases the size of the holes.     

Synthesis and characterization of dinuclear p-, m- and o-xylyl bridged complexes of molybdenum and tungsten. The crystal structures of μ-p-xylyl- bis(η-pentamethyl-cyclopentadienyltri- carbonylmolybdenum) and μ-m-xylyl-bis(η- pentamethylcyclopentadienyltricarbonyltungsten)

The reactions of η⁵-Cp^*M(CO)₃Na (M = Mo, W) with ,′-p-, m- and o-dichloro-xylenes yielded p-, m- and o-xylyl bridged dinuclear complexes of η⁵-Cp^*M(CO)₃ in high yields. All of such new complexes are stable to air and water, even stable in dilute acids and bases.     

Positron annihilation studies of chromophore-doped polymers

Doppler-broadening energy spectra and positron annihilation lifetime have been measured as a function of positron implantation energy in pure and chromophore Disperse Red 1 (DR1)-doped poly(methyl methacrylate) (PMMA) polymers. In pure PMMA, the S parameter increases at very short range (<0.02 μm) from the surface to the bulk, while the S parameter of doped PMMA varies with a decrease from a depth of >0.02 μm to about 0.5 μm after an increase, a short distance from the surface. The o-Ps lifetime of the polymers is found to increase from the bulk to the surface, which indicates that the hole size expands near the surface. The o-Ps lifetime distribution becomes broader near the surface. The change of the o-Ps intensity shows the same trend as the change of the S parameter. These results are interpreted as a gradient of DR1 concentration in PMMA, as a function of the depth from the surface to the bulk in the chromophore-doped polymers.