聚氨酯/乙烯基酯树脂互穿聚合物网络阻尼性能的研究

采用二步法制备了聚氨酯／乙烯基酯树脂互穿聚合物网络,动态力学分析法研究了ＩＰＮ的阻尼性能。结果表明,聚氨酯／乙烯基酯树脂互穿聚合物网络出现宽温度阻尼范围。当聚氨酯／乙烯基酯树脂＝４０／６０时,材料的宽温度范围的阻尼性能最好。在体系中引入柔性链可改善低温阻尼性能,而引入刚性链则降低阻尼值、提高阻尼温度、阻尼温度范围变窄。在体系中引入大侧基能显著提高聚氨酯／乙烯基酯树脂互穿聚合物网络的阻尼性能,提高交     

聚氨酯与接枝乙烯基酯树脂互穿网络研究: 自由基共聚 单体的影响

通过分子设计技术合成了两种侧链种类和长度可能控制的接枝乙烯基酯树脂(VER),并用它们与聚氨酯(PU)形成了同步互穿网络(SIN)。通过DSC,SEM,TEM,FTIR等考察了接枝VER的共聚单体对VERSIN的形态结构与力学性能的影响。研究结果表明,用甲基丙烯酸甲酯(MMA)为共聚单体的接枝VER网络中的MMA链段与PU网络中的硬段有较好的相容性,导致这类PU/接枝VERSIN中两个网络间的相容性和互穿程度好于由苯乙烯为共聚单体时合成4SIN。因此,在这两类共聚单体合成的SIN中,由MMA形成的接枝VER网络增强PU网络的效果更为显著。     

甲苯二异氰酸酯形成的聚氨酯脲与接枝乙烯基酯树脂互穿网络研究

本文首先通过分子设计技术合成了一系列侧链长度可以控制的接枝乙烯基酯树脂 (接枝VER :BO g VER ,2 0 0 g VER ,390 g VER) ,并用它们与甲苯二异氰酸酯合成的聚氨酯脲 (PUU)形成同步互穿网络(SIN) .通过DSC、SEM等考察了接枝VER的结构对PUU/接枝VERSIN的形态与力学性能的影响 .在PUU/BO g VERSIN中 ,BO g VER网络主要与PUU网络中的硬段相容和互穿 ;对于PUU/ 2 0 0 g VERSIN而言 ,2 0 0 g VER网络与PUU网络中的软段和硬段均有一定的相容性 .由于这两种SIN中两个网络间均有一定的相容性和互穿 ,故这类接枝网络能显著地增强PUU网络 ,使材料的力学性能有较大幅度的提高 .390 g VER网络本身存在的微相分离结构 ,使PUU/ 390 g VERSIN两个网络也存在显著的相分离形态 ,导致390 g VER网络对PUU网络的增强效果并不明显 .     

聚氨酯互穿聚合物网络阻尼性能研究进展

介绍了聚氨酯互穿聚合物网络（ＰＵ ＩＰＮ）作为阻尼材料的研究进展,分别讨论了聚氨酯（ＰＵ）／环氧树脂（ＥＰ）ＩＰＮ和ＰＵ／乙烯基聚合物ＩＰＮ的阻尼性,以及影响阻尼性能的因素,并比较了不同类型的ＰＵ ＩＰＮ的优缺点及新的可能的探讨方向。     

聚醚聚氨酯/环氧树脂互穿网络聚合物的研究(Ⅱ)

合成了不同类型聚醚聚氨酯/环氧树脂(PU/EP)互穿网络聚合物(IPN),通过改变PU中聚乙二醇分子量、3OH/2OH及NCO/OH比值等,研究IPN组份间分子混合程度,采用电镜、动态力学分析及应力应变等测试方法表征。结果表明:聚乙二醇分子量降低及3OH/2OH、NCO/OH比的提高,可使相容性提高,材料力学性能增强。     

聚氨酯/聚苯乙烯互穿聚合物网络的研究

互穿聚合物网络形态和力学性能的研究已有报道^[1～3],但有关合成过程中分子量变化形态和性能的影响研究甚少。本文在动力学研究的基础上^[4],用GPC、DSC和Instron万能机研究了聚氨酯/聚苯乙烯互穿聚合物网络(PU/PSt-IPN)的分子量,玻璃化转变温度和力能,考察了分子量与相分离点之间的关系。     

聚氨酯/环氧树脂互穿网络聚合物的性能研究

互穿聚合物网络（Interpenetrating polymer net-work,简称IPN）广泛应用的为聚氨酯基的互穿网络聚合物。其合成多集中在弹性体方面。本文用同步法合成的聚氨酯／环氧树脂互穿网络硬质泡沫塑料材料（简称PU／ERIPNF）,机械性能较好,并研究了其动态力学性能及形态变化。     

邻甲酚醛环氧树脂/聚氨酯互穿聚合物网络的形态与性能

邻甲酚醛环氧树脂/聚氨酯互穿聚合物网络的形态与性能;互穿聚合物网络; 邻甲酚醛环氧树脂; 聚氨酯; 力学性能; 玻璃化转变温度     

聚氨酯型互穿网络聚合物的研究

以甲苯二异氰酸酯和蓖麻油反应，合成了一系列室温固化的蓖麻油型聚氨酯。分别研究了蓖麻油聚氨酯（ＣＯＰＵ）／聚苯乙烯（ＰＳｔ）ＩＰＮｓ、ＣＯＰＵ／聚丙烯腈（ＰＡＮ）ＩＰＮｓ的结构和性能。结果表明：ＣＯＰＵ／ＰＡＮ的力学性能较ＣＯＰＵ／ＰＳｔ的力学性能为好。为进一步改善聚合物之间的相容性，在聚苯乙烯网络中引入极性较大的丙烯腈制备了ＣＯＰＵ／Ｐ（Ｓｔ－ＣＯ－ＡＮ）ＩＰＮｓ，并对它的力学性能、热分析、动态力学性能、热稳定性等作了系统的研究。结果表明：当聚氨酯浓度为６０％时，改变Ｓｔ、ＡＮ的比例，随ＡＮ含量的增加，体系的微相分离程度降低。改变ＣＯＰＵ／Ｐ（Ｓｔ－ＣＯ－ＡＮ）的比例，ｔａｎδ－Ｔ曲线上均呈现一个较宽的玻璃化转变温度；热重分析表明，其初始分解温度可达２４４℃。     

聚氨酯/丙烯酸酯类树脂互穿网络的结构形态与力学性能研究——网络间化学键的影响

通过示差扫描量热计、扫描电镜与广角Ｘ 光衍射仪研究了由碳化二亚胺改性二苯基甲烷二异氰酸酯合成的聚氨酯（ＰＵ）与丙烯酸酯类树脂（ＶＥＲ）形成的同步互穿网络（ＳＩＮ）的结构、形态与力学性能,发现网络间的化学键对其影响极大．网络间没有化学键连接的ＰＵ／ＶＥＲＳＩＮｓ是一个热力学不相容体系,存在显著的相分离形态,后者同时与两个网络的形成速率与工程因素有关;对于网络间有化学键连接的ＰＵ／ＶＥＲＳＩＮｓ,两个网络间存在一定的相容性与互穿程度,故较显著地提高ＳＩＮ的力学性能．     

Polyurethane/polyethyl acrylate interpenetrating polymer networks

The thermal decomposition kinetics of polyurethane/polyethyl acrylate interpenetrating polymer networks (PU/PEA IPN) were studied by means of thermogravimetry and derivative thermogravimetry (TG-DTG), and compared with those of polyurethane (PU) and polyethyl acrylate (PEA). The decomposition temperature (T _i) of PU/PEA IPN was found to be higher thanT _i of PEA, but lower thanT _i of PU. Thermal decomposition kinetic parameters,n andE, estimated using Coats-Redfern method, are found for PU/PEA IPN, PU and PEA to be 1.6, 1.9 and 1.1, and 196.6, 258.6 and 139.2 kJ mol^–1, respectively. The results show that PU/PEA IPN is neither a simple mixture of PU and PEA nor a copolymer of them. The mechanism of thermal decomposition of PU/PEA IPN is different from those of PU and PEA. The special network in PU/PEA IPN effectually protects weak bonds in the molecular chain of PU and PEA.We express our thanks to Dr. Yaxiong Xie and Zhiyuong Ren for their help in this work,     

Graft interpenetrating polymer networks composed of epoxy resin and urethane acrylate resin

For enhancing the interpenetratoin and/or compatibility of the simultaneous interpenetrating networks (SINs) composed of epoxy resin (epoxy) and urethane acrylate resin (UAR), the graft epoxy consisting of different lengths of poly(oxypropylene) (PO) side chains were synthesized and characterized. It was found that the graft epoxy composed of short PO side chains [MW 480, epoxy-g-PO(480)] showed a compatible system while if consisting of longer PO grafts [MW 950, epoxy-g-PO(950)] exhibited a partial microphase separation morphology. DSC measurements as well as the SEM or TEM observation indicated that the interpenetration between the two phases for epoxy/UAR SINs including epoxy-g-PO(480) was improved appreciably due to the excellent miscibility between the PO grafts and PO segments existing in the graft epoxy and the UAR network, respectively. In this case, for SIN(80/20) containing 10 wt % of epoxy-g-PO(480) the tensile strength increases by a factor of 2.70 compared with that of pure epoxy network. However, the improvement of interpenetration and/or compatibility between the two networks as well as the mechanical properties for SINs composed of epoxy-g-PO(950) are limited resulting in the partial microphase separation of epoxy-g-PO(950) network's own self. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3568–3574, 1999     

具有三维网络的新型配位聚合物[Nd(C7H6NO2)3.H2O]n的合成、结构和性质

以Nd(NO3).6H2O和NH2C6H4COOH为原料,经[Nd(C7H6NO2)3.H2O]的自组装,得到了具有三维网络结构的配位聚合物[Nd(C7H6NO2)3.H2O]n。该聚合物晶体属单斜晶系,空间群P2(1)/n,a=0.98069(5)nm,b=2.2736(2)nm,c=0.98254(8)nm,β=100.053(5)°,V=2.1571(3)nm^3,Z=4。最后的一致性因子R=0.038。磁性研究表明,该化合物在低温下表现出反铁磁性质。测定了化合物的UV-vis-NIR和IR光谱,进行了分析和指认。     

Miscibility and morphologies of poly(arylene ether phenyl phosphine oxide/sulfone) copolymer/vinyl ester resin mixtures and their cured networks

Nonreactive bisphenol A‐based poly(arylene ether triphenyl phosphine oxide/diphenyl sulfone) statistical copolymers and a poly(arylene ether triphenyl phosphine oxide) homopolymer, each having a number‐average molecular weight of about 20 kg/mol, were synthesized and solution‐blended with a commercial dimethacrylate vinyl ester resin. Free‐radical cured systems produced morphologies that were a function of both the amount of phosphonyl groups and the weight percentage of the copolymers. For example, highly hydrogen‐bonded poly(arylene ether phenyl phosphine oxide) homopolymer/vinyl ester resin mixtures were homogeneous in all proportions both before and after the formation of networks. Copolymers containing low amounts (≤30 mol %) of the phosphonyl groups displayed phase separation either before or during cure. The phase‐separated cured materials generally had phase‐inverted morphologies, such as a continuous thermoplastic copolymer phase and a particulate, discontinuous vinyl ester network phase, except for systems containing a very low copolymer content. The resin modified with a copolymer containing 30 mol % phosphine oxide comonomer showed improved fracture toughness, suggesting the importance of both phase separation and good adhesion between the thermoplastic polymer and the crosslinked vinyl ester filler phase. The results suggested that the copolymers with high amounts of phosphine oxide should be good candidates for interphase sizing materials between a vinyl ester matrix and high‐modulus carbon fibers for advanced composite systems. Copolymers with low amounts of phosphonyl groups can produce tough, vinyl ester‐reinforced plastics. The char yield increases with the concentration of bisphenol A poly(arylene ether phosphine oxide) content, suggesting enhanced fire resistance. The incorporation of thermoplastic copolymers sustains a high glass‐transition temperature but does not significantly affect the thermal degradation onset temperature. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 2409–2421, 2000     

Polyurethane/polystyrene one-shot interpenetrating polymer networks with good damping ability: Transition broadening through crosslinking,internetwork grafting and compatibilization

Good damping materials should exhibit a high loss factor value over a broad temperature range. Polyurethane and polystyrene are highly immiscible polymers with glass transition regions far apart. The interpenetrating polymer network topology can restrict phase separation and result in materials with a broad transition region. Simultaneous polyurethane/polystyrene interpenetrating polymer networks were synthesized by the one-shot route. Different methods of improving the miscibility of the two polymers were investigated. These included the vanation of the crosslink level in both polymer networks, the controlled introduction of internetwork grafting and the incorporation of compatibilizers into the polystyrene network. Dynamic mechanical thermal analysis indicated that the latter two were successful in achieving a compatibilization of the polymer components. With some materials, a high, broad transition region exhibiting a loss factor > 0.3 over more than 135°C was obtained. The morphology observed via transmission electron microscopy ranged from macrophase separated materials in the lightly crosslinked IPNs to a fine, microheterogeneous morphology in the grafted ones. Modulated differential scanning calorimetry measurements confirmed the trend of the glass transition locations observed with dynamic mechanical thermal analysis.