Electrochemically driven three-phase interlines into insulator compounds: electroreduction of solid SiO2 in molten CaCl2.

The electrochemical reduction of solid SiO2 (quartz) to Si is studied in molten CaCl2 at 1173 K. Experimental observations are compared and agree well with a novel penetration model in relation with electrochemistry at the dynamic conductor|insulator|electrolyte three-phase interlines. The findings show that the reduction of a cylindrical quartz pellet at certain potentials is mainly determined by the diffusion of the O(2-) ions and also the ohmic polarisation in the reduction-generated porous silicon layer. The reduction rate increases with the overpotential to a maximum after which the process is retarded, most likely due to precipitation of CaO in the reaction region (cathodic passivation). Data are reported on the reduction rate, current efficiency and energy consumption during the electroreduction of quartz under potentiostatic conditions. These theoretical and experimental findings form the basis for an in-depth discussion on the optimisation of the electroreduction method for the production of silicon.     

Development of master curves for discriminating the mechanism of solid state reactions from experimental data obtained by using the cyclic and controlled rate thermal analysis

The cyclic and Controlled Rate Thermal Analysis method (CRTA) has been used. The two rates automatically selected in the cyclic curve are small enough to allow the two states of the sample to be compared have nearly the same reacted fraction. Thus, the activation energy can be calculated without previous knowledge of the actual reaction mechanism. Provided that the activation energy,E, is known, a procedure has been developed for determining the kinetic law obeyed by the reaction by means of master curves that represent the values of the reacted fraction, α, as a function of?E/R(1/T-1/T _0.5),T _0.5 being the temperature at which α=0.5. This procedure has been tested by studying the thermal decomposition reaction of BaCO₃.     

Conversion of methane into C1 oxygenates by deep-UV photolysis on solid surfaces: influence of the nature of the solid and optimization of photolysis conditions

Deep-UV photolysis (either 165 or 185 nm) of surface hydroxy groups leads to homolytic O-H bond-cleavage with the generation of oxyl radicals that can initiate the room-temperature radical-chain methane activation. Whilst in the absence of oxygen, radical coupling reactions to give low-molecular-weight alkanes are observed in the gas phase, the presence of some oxygen quenches these radicals and increases the selectivity towards C1 oxygenates (methanol, formaldehyde, and formic acid species). The nature of the solid influences the efficiency of the photochemical process and the distribution between products in the gas and solid phases. Using Beta-, delaminated ITQ2 and ITQ6, and medium-pore ZSM5 zeolites, mesoporous MCM41 silicates, and non-porous TiO(2), we observed that confinement and porosity increased the proportion of C1 oxygenates adsorbed onto the solid and reduced the contribution of the gas-phase products. In addition, the presence of aluminum in the zeolite framework, which is responsible for the generation of acid sites, increased overoxidation of methanol and methoxy groups into formaldehyde and formic acids. For a given amount of methane and unchanged photolysis conditions, the conversion increased with the amount of the solid used as photocatalyst. In this way, methane conversions of up to 7% were achieved for the 185 nm photolysis of methane for 1 h with a 76 MJ mol(-1) energy consumption.     

Coordination and Redox Isomerization in the Reduction of a Uranium(III) Monoarene Complex

Synthetic studies on the redox chemistry of trivalent uranium monoarene complexes were undertaken with a complex derived from the chelating tris(aryloxide)arene ligand (^Ad,MeArO)₃mes^3?. Cyclic voltammetry of [{(^Ad,MeArO)₃mes}U^III] ( 1 ) revealed a nearly reversible and chemically accessible reduction at ?2.495 V vs. Fc/Fc⁺—the first electrochemical evidence for a formally divalent uranium complex. Chemical reduction of 1 indicates that reduction induces coordination and redox isomerization to form a uranium(IV) hydride, and addition of a crown ether results in hydride insertion into the coordinated arene to afford uranium(IV) complexes. This stoichiometric reaction sequence provides structural insight into the mechanism of arene functionalization at diuranium inverted sandwich complexes.     

Niobium(V) Oxynitride: Synthesis,Characterization, and Feasibility as Anode Material for Rechargeable Lithium‐Ion Batteries

The decomposition reaction of niobium(V) oxytrichloride ammoniate to the oxynitride of niobium in the 5+ oxidation state was developed in a methodological way. By combining elemental analysis, Rietveld refinements of X‐ray and neutron diffraction data, SEM and TEM, the sample compound was identified as approximately 5 nm‐diameter particles of NbO_1.3(1)N_0.7(1) crystallizing with baddeleyite‐type structure. The thermal stability of this compound was studied in detail by thermogravimetric/differential thermal analysis and temperature‐dependent X‐ray diffraction. Moreover, the electrochemical uptake and release by the galvanostatic cycling method of pure and carbon‐coated NbO_1.3(1)N_0.7(1) versus lithium was investigated as an example of an Li‐free transition‐metal oxynitride. The results showed that reversible capacities as high as 250 and 80 A h kg^?1 can be reached in voltage ranges of 0.05–3 and 1–3 V, respectively. Furthermore, a plausible mechanism for the charge–discharge reaction is proposed.     

Formation of 1 D and 3 D coordination polymers in the solid state induced by mechanochemical and annealing treatments: bis(3-cyano-pentane-2,4-dionato) metal complexes

Bis(3-cyano-pentane-2,4-dionato) (CNacac) metal complex, [M(CNacac)(2)], which acts as both a metal-ion-like and a ligand-like building unit, forms supramolecular structures by self-assembly. Co-grinding of the metal acetates of Mn(II), Co(II), Ni(II), Cu(II) and Zn(II) with CNacacH formed a CNacac complex in all cases: mononuclear complex was formed in the cases of Mn(II), Cu(II) and Zn(II), whereas polymeric ones were formed in the cases of Fe(II), Co(II) and Ni(II). Subsequent annealing converted the mononuclear complexes of Mn(II), Cu(II) and Zn(II) to their corresponding polymers as a result of dehydration of the mononuclear complexes. The resultant Mn(II), Fe(II), Co(II), Ni(II) and Zn(II) polymeric complexes had a common 3 D structure with high thermal stability. In the case of Cu(II), a 1 D polymer was obtained. The Mn(II), Cu(II) and Zn(II) polymeric complexes returned to their original mononuclear complexes on exposure to water vapour but they reverted to the polymeric complexes by re-annealing. Co-grinding of metal chlorides with CNacacH and annealing of the mononuclear CNacac complexes prepared from solution reactions were also examined for comparison. [Mn(CNacac)(2)(H(2)O)(2)], [M(CNacac)(2)(H(2)O)] (M=Cu(II) and Zn(II)) and [M(CNacac)(2)](infinity) (M=Mn(II), Fe(II) and Zn(II)) are new compounds, which clearly indicated the power of the combined mechanochemical/annealing method for the synthesis of varied metal coordination complexes.     

The reaction mechanism of a complex intercalation system: in situ X-ray diffraction studies of the chemical and electrochemical lithium intercalation in Cr4TiSe8

The intercalation reaction between Cr(4)TiSe(8) and Li was investigated from a kinetic and an electrochemical perspective. The structural phase transition from monoclinic to trigonal symmetry was probed by in situ energy-dispersive X-ray diffraction (in situ EDXRD) for chemical intercalation with butyllithium (BuLi). A change in the kinetic mechanism was detected for the reaction at room temperature; this was interpreted in terms of a trend from phase boundary control to diffusion control. A single diffusion-controlled mechanism is obeyed at 60 degrees C. The electrochemical measurements and the corresponding in situ X-ray diffraction (in situ XRD) data revealed that the monoclinic host is intercalated up to the composition Li(x approximately 0.1)Cr(4)TiSe(8) before the characteristic phase transition starts. The monoclinic phase undergoes complex structural changes in the following two-phase regime. Owing to the co-existence of two phases, the cell potential is constant for 0.1相似文献   

Reactions of Ruthenium Vinylidene and Acetylide Complexes Containing Trichloromethyl Groups: Preparation of a Cyclobutenonyl Complex by Solid‐State Photolysis

Solid‐state route to a cyclobutenone : Ruthenium perchlorocyclobutenonyl complex 2 is obtained by solid‐state photoisomerization of ruthenium trichloroacetyl acetylide complex 1 . The four‐membered ring is sufficiently robust that transfer of the intact ligand could be readily achieved in a reaction of 2 with an enyne. Cyclobutenedionyl complex 3 was obtained by hydrolysis of 2 in H₂O/THF.