Micellar effects on photoinduced redox reactions of Fe(bpy)2(CN)2

Excitation of solutions of Fe(bipy)₂(CN)₂ by a 266-nm laser pulse produces a hydrated electron and the oxidized complex, Fe(bipy)₂ (CN)₂⁺, in the primary photochemical step, in homogeneous aqueous solution as well as in aqueous solutions containing cetyltrimethylammonium bromide (CTAB) or sodium dodecyl sulfate (SDS) micelles. In all cases nascent hydrated electrons react with ground state Fe(bipy)₂(CN)₂ to form Fe(bipy)₂(CN)₂⁻, and comparison of the decay constants in the three media (H₂O: k = 2.8 × 10¹⁰ M⁻¹ s⁻¹; CTAB: k = 2.9 × 10¹⁰ M⁻¹ s⁻¹; SDS: k = 5.5 × 10⁹ M⁻¹ s⁻¹), shows that the reaction is essentially unaffected by CTAB micelles but is much slower in SDS solution. Similar micellar effects were found for the back reaction between e_aq⁻ and Fe(bpy)₂(CN)₂⁺. Rate constants for the scavenging of the photogenerated hydrated electrons by methyl viologen (MV²⁺) cations and NO₃⁻ anions were measured in the three systems, and the results indicate that for scavenging by MV²⁺ the rate constants are decreased in the micelle systems (k in H₂O, 8.4 × 10¹⁰; CTAB, 3.5 × 10¹⁰ and SDS, 1.58 × 10¹⁰ M⁻¹ s⁻¹), whereas for NO₃⁻ the CTAB micelle decreases while the SDS micelle enhances the scavenging compared to water solution (k in H₂O, 8.3 × 10⁹; CTAB, 7 × 10⁸; and SDS, 2.05 × 10¹⁰ M⁻¹ s⁻¹). For the comproportionation reaction between Fe(bipy)₂(CN)₂⁺ and Fe(bipy)₂(CN)₂⁻ both micelles reduce the rate (k in H₂O, 3.3 × 10¹⁰; CTAB, 2.3 × 10¹⁰; and SDS, 1.05 × 10¹⁰ M⁻¹s⁻¹), but while the reaction of Fe(bipy)₂(CN)₂⁺ with MV⁺ is increased in CTAB compared to water, it is slowed in SDS (k in H₂O, 2.4 × 10¹⁰; CTAB, 8.9 × 10¹⁰; and SDS, 1.8 × 10¹⁰ M⁻¹s⁻¹). All effects observed in these microheterogeneous systems can be uniformly interpreted in terms of Coulombic interactions between the actual reactants and the charged surface of the micelles.     

Spectral characterization of a novel near-infrared cyanine dye: a study of its complexation with metal ions

The spectral features of the near-infrared (NIR) dye TG-170 in different solutions and its complexation with several metal ions were investigated. The absorbance maxima of the dye are at λ=819, 805, and 791 nm in dimethyl sulfoxide (DMSO), methanol, and a buffer of pH 5.9, respectively. These values match the output of a commercially available laser diode (780 nm), thus making use of such a source practical for excitation. The emission wavelengths of the dye are at λ_em =822, 812, and 803 nm in DMSO, methanol, and the buffer, respectively. The molar absorptivity and fluorescence quantum yield increase accordingly. The addition of either an Al(III) ion or Be(II) ion resulted in fluorescence quenching of the dye. The Stern–Volmer quenching constant, K_SV, was calculated from the Stern–Volmer plot to be K_SV=3.11×10⁵ M⁻¹ for the Al(III) ion and K_SV=1.17×10⁶ M⁻¹ for the Be(II) ion. The molar ratio of the metal to the dye was established to be 1:1 for both metal ions. The stability constant, K_S, of the metal–dye complex was calculated to be 4.37×10⁴ M⁻¹ for the Al–dye complex and 1.94×10⁶ M⁻¹ for the Be–dye complex.     

A SEM–EDX study of highly stable supported liquid membranes based on ionic liquids

This work evaluates the operational stability of six different supported liquid membranes (SLMs) based on ionic liquids (ILs). [bmim⁺][PF₆⁻]_, [bmim⁺][BF₄⁻] and [bmim⁺][NTf₂⁻] were used as supporting phase in Nylon^® and Mitex^® membranes. Scanning electron microscopy (SEM) combined with energy dispersive X-ray (EDX) analysis was used to characterize the membrane surface morphologically and examine the global chemical composition of the membranes and the distribution of the ILs within them.

Study of the freshly impregnated membranes showed that, in all cases, the ILs were homogeneously distributed, mostly filling the pores of the membranes although, in some cases, a small amount of excess of IL was located on the external membrane surface. Stability tests were performed by keeping the respective impregnated membranes immersed for a week in a diffusion cell including two independent compartments and using n-hexane/n-hexane as the respective feed and receiving phases. The SEM–EDX study of membranes after continuous operation showed that the ILs were still retained within the membrane pores and only small losses of the IL initially located on the external surface were observed. These observations are in complete agreement with the ionic losses determined by mass balance.     

On the conformational stability and dimerization of phosphotransferase enzyme I from Escherichia coli

The activity of enzyme I (EI), the first protein in the bacterial PEP:sugar phosphotransferase system, is regulated by a monomer–dimer equilibrium where a Mg²⁺-dependent autophosphorylation by PEP requires the homodimer. Using inactive EI(H189A), in which alanine is substituted for the active-site His189, substrate binding effects can be separated from those of phosphorylation. Whereas 1 mM PEP (with 2 mM Mg²⁺) strongly promotes dimerization of EI(H189A) at pH 7.5 and 20 °C, 5 mM pyruvate (with 2 mM Mg²⁺) has the opposite effect. A correlation between the coupling of N- and C-terminal domain unfolding, measured by differential scanning calorimetry, and the dimerization constant for EI, determined by sedimentation equilibrium, is observed. That is, when the coupling between N- and C-terminal domain unfolding produced by 0.2 or 1.0 mM PEP and 2 mM Mg²⁺ is inhibited by 5 mM pyruvate, the dimerization constant for EI(H189A) decreases from >10⁸ to <5 × 10⁵ or 3 × 10⁷ M⁻¹, respectively. With 2 mM Mg²⁺ at 15–25 °C and pH 7.5, PEP has been found to bind to one site/monomer of EI(H189A) with K_A′10⁶ M⁻¹ (ΔG′=−33.7±0.2 kJ mol⁻¹ and ΔH=+16.3 kJ mol⁻¹ at 20 °C with ΔC_p=−1.4 kJ K⁻¹ mol⁻¹). The binding of PEP to EI(H189A) is synergistic with that of Mg²⁺. Thus, physiological concentrations of PEP and Mg²⁺ increase, whereas pyruvate and Mg²⁺ decrease the amount of dimeric, active, dephospho-enzyme I.     

New aspects of the reaction of silver(I) cations with the ethylenediaminetetraacetate ion

The highly neutralized ethylenediaminetetraacetate (EDTA) titrant (95–99% as Y⁴⁻ anion) precipitates with Ag⁺ cations to form the Ag₄Y species, in aqueous medium, which is well characterized from conductometric titration, thermal analysis and potentiometric titration of the silver content of the solid. The precipitate dissolves in excess Y⁴⁻ to form a complex, AgY³⁻. Equilibrium studies at 25°C and ionic strength 0.50 M (NaNO₃) have shown from solubility and potentiometric measurements that the formation constant (95% confidence level) β₁ = (1.93 ± 0.07) × 10⁵ M⁻¹ and the solubility products are K_S0 = [Ag +]⁴[Y⁴⁻] = (9.0 ± 0.4) × 10⁻¹⁸ M⁵ and K_S1 = [Ag +]³[AgY³⁻] = (1.74 ± 0.08) × 10⁻¹² M⁴. The presence of Na⁺, rather than ionic strength, markedly affects the equilibrium; the data at ionic strength 0.10 M are: β₁ = (1.19 ± 0.03) × 10⁶ M⁻¹, K_S0 = (1.6 ± 0.4) × 10⁻¹⁹ M⁵ and K_S1 = (1.9 ± 0.5) × 10⁻¹³ M⁴; at ionic strength tending to zero; β₁ = (1.82 ± 0.05) × 10⁷ M⁻¹, K_S0 = (2.6 ± 0.8) × 10⁻²² M⁵ and K_S1 = (5 ± 1) × 10⁻¹⁵ M⁴. The intrinsic solubility is 2.03 mM silver (I) in 0.50 M NaNO₃. Well-defined potentiometric titration curves can be taken in the range 1–2 mM with the Ag indicator electrode. Thermal analysis revealed from differential scanning calorimetry a sharp exothermic peak at 142°C; thermal gravimetry/differential thermal gravimetry has shown mass loss due to silver formation and a brown residue, a water-soluble polymeric acid (decomposition range 135–157°C), tending to pure silver at 600°C, consistent with the original Ag₄Y salt.     

Fabrication of a thin palladium membrane supported in a porous ceramic substrate by chemical vapor deposition

A thin, gas-tight palladium (Pd) membrane was prepared by the counter-diffusion chemical vapor deposition (CVD) process employing palladium chloride (PdCl₂) vapor and H₂ as Pd precursors. A disk-shaped, two-layer porous ceramic membrane consisting of a fine-pore γ-Al₂O₃ top layer and a coarse-pore -Al₂O₃ substrate was used as Pd membrane support. A 0.5–1 μm thick metallic membrane was deposited in the γ-Al₂O₃ top layer very close to its surface, as verified by XRD and SEM with a backscattered electron detector. The most important parameters that affected the CVD process were reaction temperature, reactants concentrations and top layer quality. Deposition of Pd in the γ-Al₂O₃ top layer resulted in a 100- to 1000-fold reduction in He permeance of the porous substrate. The H₂ permeation flux of these membranes was in the range 0.5–1.0 × 10⁻⁶ mol m⁻² s⁻¹ Pa⁻¹ at 350–450°C. The H₂ permeation data suggest that surface reaction steps are rate-limiting for H₂ transport through such thin membranes in the temperature range studied.     

The ion-pair association constant of oxalate with fac-tris(2-aminomethylpyridine)cobalt(III)

The equilibrium constant K for the ion-pair formation fac-[Co(pic)₃]³⁺ + C₂O₂₂₋ fac-[Co(pic)₃]³⁺/C₂O₄²⁻¹ where pic = 2-aminomethylpyridine, has been determined spectrophotometrically at 0.35 M (KCl) ionic strength and 25.0°C, using four different calculation approaches. The best results were obtained when the concentration of the minor component (the cobalt complex ion) was not neglected in comparison with the oxalate ion concentration. The value of K (5.3 M⁻¹) increases when the supporting electrolyte is LiCl (K = 8.2 M⁻¹). The effect of the ionic strength variation from 0.35 to 2.0 M (LiCl) was also investigated.     

About the TATB assumption: effect of charge reversal on transfer of large spherical ions from aqueous to non-aqueous solvents and on their interfacial behaviour

We present a molecular dynamics study of the solvation properties of large spherical ions S⁺ and S⁻ of same size, in water, chloroform and acetonitrile solutions, and at a water–chloroform interface. According to the “extrathermodynamic” TATB hypothesis, such ions have identical free energies of transfer from water to any solvent. We find that this is not the case, because S⁻ interacts better than S⁺ with water (by about 20 kcal mol⁻¹), while S⁺ is better solvated by acetonitrile (by about 2 kcal mol⁻¹) and chloroform (about 8 kcal mol⁻¹) solvents. The importance of “long-range” electrostatic interactions on the charge discrimination by solvent is demonstrated by the comparison of standard vs corrected methods to calculate: (i) the electrostatic potential at the centre of the solute; (ii) the interaction energies between the ions and the solvents; and (iii) the free energies of charging the neutral sphere S⁰ to S⁺ and S⁻, respectively. These conclusions are obtained with several solvent models and simulation conditions. The question of ion pairing for the S⁺S⁻, S⁺Cl⁻ and S⁻Na⁺ pairs is also examined in the three solvents. Finally, simulations at a liquid–liquid water–chloroform interface represented explicitly, show that S⁺ and S⁻ are highly surface active, although they do not possess, like classical surfactants, an amphiphilic topology. Adsorption at the interface is found with different methodologies and at different ion concentrations. These results are important in the context of the “TATB hypothesis”, and for our understanding of solvation of large hydrophobic ions in pure liquids or in heterogeneous liquid environments.     

Laser photolysis of zinc porphyrin dissolved in cyanohexylbiphenyl liquid crystal

A laser photolysis study of ZnTPP (P) oriented in nematic and isotropic cyanohexylbiphenyl (6CB) as a function of added 1.4-benzoquinone (Q) is reported. In the absence of Q, enhancement of triplet absorption below the clearing point (nematic phase) is observed. It is attributed to the improved alignment of the optical transition in the ordered matrix and also to the increase in the intersystem crossing efficiency. T−S₁. In the presence of Q in the nematic phase. An additional increase in triplet absorption is noticed. This result is interpreted in terms of a triplet radical pair [P^+√…Q^−√]^T,RP formation which is facilitated by the ordering in the liquid crystal, thus providing an additional channel for triplet formation. The triplet P^T in 6CB (nematic or isotropic) is quenched with a second-order rate of ≈10⁸ M⁻¹ s⁻¹ as compared to 2 × 10⁹ M⁻¹ s⁻¹ in toluene.     

Kinetics and mechanisms of the redox reaction of hexaaquotitanium(III) and the ethylenediamine tetraacetato titanium(III) complex by aqueous solutions of bromine

At 25°C, I = 1.0 M (CF₃SO₃⁻Li⁺+CF₃SO₃H), [H⁺] = 0.034–0.274 M and λ = 453 nm, the rate equation for the oxidation of Ti(H₂O), ₆³⁺ by bromine was found to be: −d/[Br₂]T/dt=kK/[Br₂][Ti^III]/[H⁺]+K+kK/[Br₃⁻][Ti^III]/[H⁺+K, where k = 9.2 × 10⁻³ M ⁻¹ s ⁻¹ and K = 4.5 × 10⁻³ M. At [H⁺] = 1.0 M, [Br⁻] = 0.05–0.4 M, the apparent second-order rate constant decreases as [Br⁻] increases.

The pH-dependence of the oxidation of Ti^III-edta by bromine is interpreted in terms of the change in identity of the Ti^III-edta species as the pH of the reaction medium changes. The second-order rate constants were fitted using a non-linear least-square computer program with (1/k₀^edta)² weighting into an equation of the form: k₀^edta =k₁+k₂K₁[H⁺]⁻¹+k₃K₁K₂[H⁺]^−2/1+K₁[H⁺[H⁺⁻¹+K₁K₂[H⁺]⁻², with K₁ and K₂ fixed as earlier determined at 9.55 × 10⁻³ and 2.29 × 10⁻⁹ M, respectively, for the oxidation of bromine. k₁=k₂=(3.1±0.32)×10³M⁻¹s⁻¹ k₃=(2.3±0.45)×10⁶N⁻¹s⁻¹.

It is proposed that these electron transfer reactions proceed by univalent changes with the production of Br₂^.− as a transient intermediate. An outer-sphere mechanism is proposed for these reactions. The homonuclear exchange rate for Ti^III-edta+Ti^IV-edta is estimated at 32 M⁻¹ s⁻¹.     

Synthesis of industrial scale NaY zeolite membranes and ethanol permeating performance in pervaporation and vapor permeation up to 130 °C and 570 kPa

NaY zeolite tubular membranes in an industrial scale of 80 cm long were synthesized on monolayer and asymmetric porous supports. The quality of synthesized membranes were evaluated by pervaporation (PV) experiments in 80 cm long at 75 °C in a mixture of water (10 wt.%)/ethanol (90 wt.%), resulting in higher permeation fluxes of 5.1 kg m⁻² h⁻¹ in the monolayer type membrane and of 9.1–10.1 kg m⁻² h⁻¹ in the asymmetric-type membranes, respectively. The uniformity with small performance fluctuation in longitudinal direction of the membranes were observed by PV for 10–12 cm long samples at 50 °C in a mixture of methanol (10 wt.%)/MTBE (90 wt.%). The ethanol single component permeation experiments in PV and vapor permeation (VP) up to 130 °C and 570 kPa were performed to determine the relations between the ethanol flux and the ethanol pressure difference across the membrane which is represented by permeance (Π, mol m⁻² s⁻¹ Pa⁻¹) for estimate of potential of ethanol extraction through the present NaY zeolite membranes applying feasible studies. Results indicate that (1) the permeation fluxes are linearly proportional to the driving force of vapor pressure for each sample in VP and PV. The permeances through an asymmetric support type membrane were rather constant of 0.6–1.2 × 10⁻⁷ mol m⁻² s⁻¹ Pa⁻¹ in the wide temperature range of 90–130 °C in PV and VP, indicating that the ethanol permeances have weak temperature dependency with the feed at the saturated vapor pressure.

The results of superheating VP experiments showed that ethanol permeation fluxes are increased with increasing of the degree of superheating at a given constant feed vapor pressure. The ethanol permeances are increased with increasing of temperature at a given feed vapor pressure. The superheating VP could be a feasible process in industry.     

Far-UV laser flash photolysis in solution. A study of the chemistry of 1,1-dimethylsilene in hydrocarbon solvents

The far-UV (193 nm) laser flash photolysis of nitrogen-saturated isooctane solutions of 1,1-dimethylsiletane allows the direct detection of 1,1-dimethylsilene as a transient species, which (at low laser intensities) decays with pseudo-first-order kinetics (τ 10 μs) and exhibits a UV absorption spectrum with λ_max 255 nm. Characteristic rapid quenching is observed for the silene with methanol (k_McOH = (4.9 ± 0.2) × 10⁹ M⁻¹ s⁻¹), tert-butanol (k_BuOH = (1.8 ± 0.1) × 10⁹ M⁻¹ s⁻¹) and oxygen (k_O2 = (2.0 ± 0.5) × 10⁸ M⁻¹ s⁻¹). The Arrhenius activation parameters for the reaction with methanol have been determined to be E_a = −2.6 ± 0.6 kcal mol⁻¹ and log A = 7.7 ± 0.3.     

Second sphere interaction in fluoroanion binding: Synthesis, spectroscopic and X-ray structural study of trans-dichlorobis(ethylenediamine) cobalt(III) terafluoroborate

Trans-dichlorobis(ethylenediamine) cobalt(III) terafluoroborate was synthesised and detailed packing analysis was undertaken to delineate the topological complimentarity of [trans-Co(en)₂Cl₂]⁺ and BF₄⁻ ions by second sphere coordination. The complex was completely characterised by elemental analyses, solubility product measurement and spectroscopic studies (IR, UV–Vis, multinuclear NMR). In the crystal lattice, discrete ions [trans-Co(en)₂Cl₂]⁺ and BF₄⁻ are arranged in A–B–A–B pattern (in both a and c directions of the lattice) forming columns of anions and cations. Crystal lattice is stabilized by electrostatic forces of attraction and hydrogen bonding interactions, i.e. N–HF⁻ and N–HCl involving second sphere coordination. It appears that the topological features of [trans-Co(en)₂Cl₂]⁺ are conducive for generating second sphere interactions. This strategy may be used as a viable method for the capture of other fluoroanions.     

Characterization of antibodies against benzo[a]pyrene with thermodynamic and kinetic constants

Antibodies of a polyclonal antiserum against benzo[a]pyrene were characterized by determining thermodynamic and kinetic constants of the antigen–antibody reaction. Label-free binding assays with optical detection based on reflectometric interference spectroscopy were performed to determine these constants. Different evaluation methods for kinetic measurements were compared. Also, cross-reactivity against two other polycyclic aromatic hydrocarbons, chrysene and pyrene, was checked. The affinity constant between the antibodies and benzo[a]pyrene in homogeneous phase was determined to be K=(5.3±0.3)×10⁷ M⁻¹ which was in the middle of the usual range of antibody affinities. The association rate constant for the reaction at the surface was determined to be (3.8±0.9)×10⁵ M⁻¹ s⁻¹, the dissociation rate constant as (9.7±0.5)×10⁻³ s⁻¹. Different evaluation methods applied to the kinetic measurements led to the same results. This antiserum would be suitable for the selective determination of benzo[a]pyrene in concentrated samples.     

Effect of dose rate of gamma irradiation on biochemical quality and browning of mushrooms Agaricus bisporus

In order to enhance the shelf-life of edible mature mushrooms Agaricus bisporus, 2 kGy ionising treatments were applied at two different dose rates: 4.5 kGy/h (I⁻) and 32 kGy/h (I⁺). Both I⁺ and I⁻ showed 2 and 4 days shelf-life enhancement compared to the control (C). Before day 9, no significant difference (p>0.05) in L^* value was detected in irradiated mushrooms. However, after day 9, the highest observed L^* value (whiteness) was obtained for the mushrooms irradiated in I⁻. Analyses of phenolic compounds revealed that mushrooms in I⁻ contained more phenols than I⁺ and C, the latter containing the lower level of phenols. The polyphenol oxidase (PPO) activities of irradiated mushrooms, analysed via catechol oxidase and dopa oxidase substrates, resulted in being significantly lowered (p0.05) compared to C, with a further decrease in I⁺. Analyses of the enzymes indicated that PPO activity was lower in I⁺, contrasting with its lower phenol concentration. Ionising treatments also increased significantly (p0.05) the phenylalanine ammonia-lyase (PAL) activity. The observation of mushrooms cellular membranes, by electronic microscopy, revealed a better preserved integrity in I⁻ than in I⁺. It is thus assumed that the browning effect observed in I⁺ was caused by both the decompartimentation of vacuolar phenol and by the entry of molecular oxygen into the cell cytoplasm. The synergetic effect of the residual active PPO and the molecular oxygen, in contact with the phenols, allowed an increased oxidation rate and, therefore, a more pronounced browning in I⁺ than in I⁻.     

Electron transfer from triplet thymine and thymidine to lipoic acid

Electron transfer from the triplet excited state of thymine or thymidine to the disulphide compound lipoic acid (RSSR) was studied using KrF laser flash photolysis (248 nm, 20 ns). The electron transfer reaction rate constants, measured at 310 nm, were determined to be 1.3×10¹⁰ M⁻¹ s⁻¹ and 6.9×10⁹ M⁻¹ s⁻¹ for thymine and thymidine respectively. The transient absorbance at 400 nm in the presence of the quencher is attributed to the anion radical of lipoic acid.     

Kinetics and mechanism of the reaction between silver(III) and thiourea in aqueous alkaline media

The tetrahydroxoargentate(III) ion, Ag(OH)₄⁻, is rapidly reduced by thiourea (tu) in accordance with the three term rate law RATE = {k₁+(k₂+k₃[OH⁻])[tu]}[Ag^III] where k₁ = 1.08 s⁻¹, k₂ = 1.46 x 10³ M⁻¹ s⁻¹, and k₃ = 2.02 x 10³ M⁻² s⁻¹. The k₁ path occurs via the rate-determining aquation of Ag(OH)₄⁻ while the other two paths involve axial attack of thiourea on silver. The higher values of k₂ and k₃ compared to the ethylenediamine reaction, which obeys the same rate law, is a reflection of the greater nucleophilicity of tu.

Following the redox reaction, solutions become brown in a reaction that obeys pseudo-first-order kinetics. Similar behaviour is observed when tu is replaced by Na₂S or thio-acetamide and when Ag^I reacts with any of these sulphur containing compounds. We attribute this process to the Ag^I promoted formation of sulphide species which eventually precipitate as Ag₂S.     

The production of SO (Σ) by flash excitation of sulphur dioxide

The spectrum of SO (X³Σ⁻) has been observed following the flash excitation of sulphur dioxide with radiation above 250 nm. Sulphur monoxide is produced via an excited molecule mechanism involving triplet SO₂. The rate constant for the reaction ³SO₂ + SO₂ was measured as (3.1 ± 1) × 10⁸ M⁻¹ sec⁻¹.     

X-Ray, MP2 and DFT studies of the structure and vibrational spectra of homarinium chloride

The effects of hydrogen bonding, inter- and intramolecular electrostatic interactions on the structure of homarinium chloride, HOMH·Cl, in the crystal and its isolated molecule have been studied by X-ray diffraction, FT-IR, Raman, ¹H and ¹³C NMR spectroscopies, and by the MP2 and DFT theoretical methods. In the crystal, the Cl⁻ anion is connected with protonated homarine via the O–HCl⁻ hydrogen bond of the length of 2.937(4) Å, and two N⁺Cl⁻ intermolecular electrostatic interactions. In the isolated molecule, according to the MP2 and B3LYP calculations, the Cl⁻ anion is engaged in a shorter hydrogen bond (O–HCl⁻ of 2.811–2.861 Å) and in one type of intramolecular electrostatic interactions. The calculated bond lengths and bond angles at the MP2 and B3LYP levels of theory are in good agreement with the X-ray data, except the conformation of the COOH group, which is cis (syn) in the crystal and trans (anti) in the isolated molecule. The tentative assignments for the experimental solid state vibrational spectra of HOMH·Cl and HOMD·Cl have been made on the basis of the B3LYP/6-31G(d,p) calculated frequencies and intensities. The effect of quaternization of picolinic acid on the chemical shifts of the ring protons and carbons is analyzed.     

The structure and potentials of the interaction of complexes of polyatomic anions with Li, Na, and the molecules of aprotic solvents

The semiempiric CNDO method with the modified potential of core-core repulsion is used for quantum-chemical calculations of the potential surface cross-sections, charge distribution and the electrostatic field in complexes of the type A⁻…M⁺ (A⁻ = ClO⁻₄, NO⁻₃, SCN⁻, BF⁻₄, AsF⁻₆; M⁺ = Li⁺, Na⁺) and A⁻…M⁺…Mol (acetonitrile, pyridine, dimethylformamide, dimethylsufloxide, nitromethane, tetrahydrofuran). It is established that the anion-cation interaction potential has the form of a complex function with several minima which correspond to possible types of coordination between anions and cations. The effect of solvent molecules leads to the weakening of the interionic bond and the decrease of the potential barrier between configurations with different types of anion-cation coordination.