Luminescence properties of BAM phosphor synthesized by TEA coprecipitation method

BAM (BaMgAl₁₀O₁₇:Eu²⁺) is a well-known phosphor used as the blue component of commercial fluorescent lamps. To improve the luminescence efficiency and chromatic properties of phosphors is a significant issue for applications in white LEDs; therefore, processing is one of the important topics to investigate. In this study, BAM (Ba_0.98Eu_0.02)MgAl₁₀O₁₇ phosphors were prepared by triethylamine (TEA) coprecipitation and solid-state reaction methods. Effects of synthesis temperature, annealing conditions in reductive atmosphere and AlF₃ flux fraction on the crystal characteristics and luminescent properties of BAM phosphors were also discussed. The results showed that phosphors synthesized by TEA coprecipitation method had stronger effects on the above-mentioned properties.     

Luminescence properties of a new green emitting Eu2+-doped barium chlorosilicate phosphor

A new intense green light-emitting phosphor, the Eu²⁺-doped (BaO–BaCl₂–SiO₂) phosphor system, was synthesized at 800°C by the conventional high-temperature solid-state reaction. Its structure and luminescence properties were investigated by using thermogravimetry-differential scanning calorimetry (TG-DSC), X-ray diffraction (XRD), diffuse reflection spectra, photoluminescence (PL) and photoluminescence excitation (PLE) spectra. The photoluminescence spectrum reveals that this phosphor can be efficiently excited by near-ultraviolet (UV) light and blue light in the wavelength region covering 280 and 480 nm, which perfectly matches the emission wavelength of near-UV light-emitting diodes (LEDs). It emits an intense green light peaking at 502 nm, which is promising to develop possible applications for white LEDs.     

KBaPO4:Ln (Ln=Eu, Tb, Sm) phosphors for UV excitable white light-emitting diodes

This letter reports the novel three emission bands based on phosphate host matrix, KBaPO₄ doped with Eu²⁺, Tb³⁺, and Sm³⁺ for white light-emitting diodes (LEDs). The phosphors were synthesized by solid-state reaction and thermal stability was elucidated by measuring photoluminescence at higher temperatures. Eu²⁺-doped KBaPO₄ phosphor emits blue luminescence with a peak wavelength at 420 nm under maximum near-ultraviolet excitation of 360 nm. Tb³⁺-doped KBaPO₄ phosphor emits green luminescence with a peak wavelength at 540 nm under maximum near-ultraviolet excitation of 370 nm. Sm³⁺-doped KBaPO₄ phosphor emits orange-red luminescence with a peak wavelength at 594 nm under maximum near-ultraviolet excitation of 400 nm. The thermal stabilities of KBaPO₄:Ln (Ln=Eu²⁺, Tb³⁺, Sm³⁺), in comparison to commercially available YAG:Ce³⁺ phosphor were found to be higher in a wide temperature range of 25-300 °C.     

A potential green-emitting phosphor Ca8Mg(SiO4)4Cl2:Eu for white light emitting diodes prepared by sol-gel method

A potential green emitting phosphor Ca₈Mg(SiO₄)₄Cl₂:Eu²⁺ was prepared by modified sol-gel method. The factors those affect the photoluminescence intensity including heating temperature, the usage of the chlorine source CaCl₂ and the concentration of dopant Eu²⁺ were also investigated in detail. As comparison, the phosphor prepared by solid-state reaction was also prepared. The phosphors show intense absorption in the range of 375-450 nm, which makes it a potential candidate of green emitting phosphor used for near-UV or blue light excited white LEDs.     

Orange emissive Sr3Al2O5Cl2:Eu2+ phosphor for warm-white light-emitting diodes

Orange-emitting Sr₃Al₂O₅Cl₂:Eu²⁺ phosphors were synthesized by a high-temperature solid-state reaction. The excitation spectrum shows a broad band from the UV region to the blue region. The emission spectrum shows strong orange emission peaking at 610 nm, attributed to the d–f transition of the Eu²⁺ ion. By combining the Sr₃Al₂O₅Cl₂:Eu²⁺ phosphor with 420 nm and 460 nm chips, three white light-emitting diodes (LEDs) were fabricated. The warm-white LEDs show color rendering indexes of 76, 66 and 90 with color temperatures of 2447, 3546 and 4300 K, respectively. This new phosphor exhibits the potential to act as a single host doped with Eu²⁺ phosphor for UV or blue chip excited white LEDs.     

Preparation and luminescent properties of BaCa2Si3O9:Eu

A blue emitting phosphor of the triclinic BaCa₂Si₃O₉:Eu²⁺ was prepared by the combustion-assisted synthesis method and an efficient blue emission ranging from the ultraviolet to visible was observed. The luminescence and crystallinity were investigated using luminescence spectrometry and X-ray diffractometry (XRD), respectively. The emission spectrum shows a single intensive band centered at 445 nm, which corresponds to the 4f⁶5d¹→4f⁷ transition of Eu²⁺. The excitation spectrum is a broad extending from 260 to 450 nm, which matches the emission of ultraviolet light-emitting diodes (UV-LEDs). The critical quenching concentration of Eu²⁺ in BaCa₂Si₃O₉:Eu²⁺ phosphor is about 0.05 mol. The corresponding concentration quenching mechanism is verified to be a dipole-dipole interaction. The CIE of the optimized sample Ba_0.95Ca₂Si₃O₉:Eu_0.05²⁺ was (x, y)=(0.164, 0.111). The result indicates that BaCa₂Si₃O₉:Eu²⁺ can be potentially useful as a UV radiation-converting phosphor for white light-emitting diodes (LEDs).     

Photoluminescence studies of red-emitting NaEu(WO4)2 as a near-UV or blue convertible phosphor

Sodium europium double tungstate [NaEu(WO₄)₂] phosphor was prepared by the solid-state reaction method. Its crystal structure, photoluminescence properties and thermal quenching characteristics were investigated aiming at the potential application in the field of white light-emitting diodes (LEDs). The influences of Sm doping on the photoluminescence properties of this phosphor were also studied. It is found that this phosphor can be effectively excited by 394 or 464 nm light, which nicely match the output wavelengths of near-ultraviolet (UV) or blue LED chips. Under 394 or 464 nm light excitation, this phosphor exhibits stronger emission intensity than the Y₂O₂S:Eu³⁺ or Eu²⁺-activated sulfide phosphor. The introduction of Sm³⁺ ions can broaden the excitation peaks at 394 and 464 nm of the NaEu(WO₄)₂ phosphor and significantly enhance its relative luminance under 400 and 460 nm LEDs excitation. Furthermore, the relative luminance of NaEu(WO₄)₂ phosphor shows a superior thermal stability compared with the commercially used sulfide or oxysulfide phosphor, and make it a promising red phosphor for solid-state lighting devices based on near-UV or blue LED chips.     

Eu substitution and particle size control of Y2O2S for the excitation by UV light emitting diodes

Yttrium oxysulfide doped with europium (Y₂O₂S:Eu³⁺) red phosphor is used in UV light emitting diodes (LEDs) by mixing with blue and green phosphors to generate white light which are important for the application in general lighting. Here, we demonstrate the effect of shape and size and the concentration of activator (Eu) of red Y₂O₂S phosphor.     

A red oxide phosphor, Sr2ScAlO5:Eu2+ with perovskite-type structure, for white light-emitting diodes

Sr2ScAlO5:Eu2+,a red oxide phosphor with a perovskite-type structure,has been synthesized through a solid-state reaction and its luminescence properties have been investigated.An absorption band centering at 450 nm is observed from the diffuse reflection spectra and the excitation spectra,indicating that the phosphor can match perfectly with the blue light of InGaN light-emitting diodes.A broad red emission band at 620 nm is found from the emission spectra,originating from the 4f 6 5d-4f 7 transition of the Eu 2+ ions.The best doping content of Eu in this material is about 5%.Sr2ScAlO5:Eu2+is a highly promising red phosphor for use in white light-emitting diodes.     

Green Eu-doped Ba3Si6O12N2 phosphor for white light-emitting diodes: Synthesis, characterization and theoretical simulation

The Eu²⁺-doped Ba₃Si₆O₁₂N₂ green phosphor (Eu_xBa_3−xSi₆O₁₂N₂) was synthesized by a conventional solid state reaction method. It could be efficiently excited by UV-blue light (250-470 nm) and shows a single intense broadband emission (480-580 nm). The phosphor has a concentration quenching effect at x=0.20 and a systematic red-shift in emission wavelength with increasing Eu²⁺ concentration. High quantum efficiency and suitable excitation range make it match well with the emission of near-UV LEDs or blue LEDs. First-principles calculations indicate that Ba₃Si₆O₁₂N₂:Eu²⁺ phosphor exhibits a direct band gap, and low band energy dispersion, leading to a high luminescence intensity. The origin of the experimental absorption peaks is clearly identified based on the analysis of the density of states (DOS) and absorption spectra. The photoluminescence properties are related to the transition between 4f levels of Eu and 5d levels of both Eu and Ba atoms. The 5d energy level of Ba plays an important role in the photoluminescence of Ba₃Si₆O₁₂N₂:Eu²⁺ phosphor. The high quantum efficiency and long-wavelength excitation are mainly attributed to the existence of Ba atoms. Our results give a new explanation of photoluminescence properties and could direct future designation of novel phosphors for white light LED.     

Intense green/yellow emission in Ca8Zn(SiO4)4Cl2:Eu, Mn through energy transfer for blue-LED lighting

Eu²⁺ and Mn²⁺ co-doped Ca₈Zn(SiO₄)₄Cl₂ phosphors have been synthesized by a high temperature solid state reaction. Energy transfer from Eu²⁺ to Mn²⁺ is observed. The emission spectra of the phosphors show a green band at 505 nm of Eu²⁺ and a yellow band at 550 nm of Mn²⁺. The excitation spectra corresponding to 4f⁷-4f⁶5d transition of Eu²⁺ cover the spectral range of 370-470 nm, well matching UV and/or blue LEDs. The shortening of fluorescent lifetimes of Eu²⁺ followed by simultaneous increase of fluorescent intensity of Mn²⁺ with increasing Mn²⁺ concentrations is studied based on energy transfer. Upon blue light excitation the present phosphor can emit intense green/yellow in comparison with other chlorosilicate phosphors such as Eu²⁺ and Mn²⁺ co-doped Ca₈Mg(SiO₄)₄Cl₂ and Ca₃SiO₄Cl₂, demonstrating a potential application in phosphor converted white LEDs.     

蓝色荧光粉Sr2B5O9Cl:Eu2+发光特性的研究

采用高温固相法合成了近紫外光激发的蓝色荧光粉Sr₂B₅O₉Cl:Eu²⁺,研究了SrCl₂ ·6H₂O用量和Eu²⁺浓度对其结构和发光性能的影响.随着Eu²⁺浓度的增加,其结构无明显变化,发光强度先增强后减弱,当其浓度为8mol%时,荧光粉的发光强度最大;当用Ca取代Sr时,荧光粉的发射峰从425 nm红移到453 nm. 适当过量 关键词： 氯硼酸盐 蓝色荧光粉 LED     

High brightness and precise adjustment of multicolor-tunable luminescence of Lu2GeO5:Tb3+, Eu3+ phosphors for white LEDs

High brightness and precise adjustment of luminescence colour of phosphors are two main targets in the research of phosphor-converted white LEDs. However, few feasible strategy can be employed to achieve the multicolor-tunable luminescence under the premise of maintaining high quantum efficiency. Here, we demonstrate a high-efficiency energy-transfer process from Tb³⁺ to Eu³⁺ ions with a higher luminescent quantum efficiency (64.5% and 53.4%, respectively), and green-red multicolor emission in Lu₂GeO₅ host via varying the doping content of Tb³⁺ and Eu³⁺ ions. Besides, Lu₂GeO₅:Tb³⁺, Lu₂GeO₅: Eu³⁺ and Lu₂GeO₅: Tb³⁺, Eu³⁺ all exhibit weak thermal quenching which ensures the stable use of white LED device in the high temperature environment. This paper provides a novel multicolor-tunable phosphor with high brightness, efficient energy transfer and weak thermal quenching, which presents a potential application for UV-converted white LEDs.     

A novel blue-emitting long-lasting proyphosphate phosphor Sr2P2O7:Eu,Y

By introducing the Y³⁺ into Sr₂P₂O₇:Eu²⁺, we successfully prepared a kind of new phosphor with blue long-lasting phosphorescence by the high-temperature solid-state reaction method. In this paper, the properties of Sr₂P₂O₇:Eu²⁺,Y³⁺ were investigated utilizing XRD, photoluminescence, luminescence decay, long-lasting phosphorescence and thermoluminescence (TL) spectra. The phosphor emitted blue light that was related to the 4f⁶5d¹-⁸S_7/2 transition of Eu²⁺. The bright blue phosphorescence could be observed by naked eyes even 8 h after the excitation source was removed. Two TL peaks at 317 and 378 K related to two types of defects appeared in the TL spectrum. By analyzing the TL curve the depths of traps were calculated to be 0.61 and 0.66 eV. Also, the mechanism of LLP was discussed in this report.     

Ca2BO3Cl:Ce,Eu: A potential tunable yellow-white-blue-emitting phosphors for white light-emitting diodes

Polycrystalline Ca₂BO₃Cl:Ce³⁺,Eu²⁺ phosphors were synthesized by a solid-state reaction and which could display tunable color emission from blue to yellow under an ultraviolet (UV) source by adjusting the ratio of Ce³⁺ and Eu²⁺ appropriately. The mechanism of resonance-type energy transfer from Ce³⁺ to Eu²⁺ was established to be electric dipole-dipole natured, and the critical distance was estimated to be 31 Å based on the spectral overlap and concentration quenching model. A white light was obtained from Ca₂BO₃Cl:0.06Ce³⁺,0.01Eu²⁺ phosphor with chromaticity coordinates (x=0.31, y=0.29) and relative color temperature of 7330 K upon excitation with 360 nm, which is potentially a good candidate as an UV-convertible phosphor for white light-emitting diodes (LEDs).     

Luminescence properties and energy transfer in Eu2+, Mn2+ codoped Na(Sr,Ba)PO4 phosphor

Eu²⁺ and Mn²⁺ singly doped and codoped Na(Sr,Ba)PO₄ phosphors were synthesized, and their luminescent properties were investigated. A broad blue emission and a broad orange emission band were observed in Na(Sr,Ba)PO₄:Eu²⁺, Mn²⁺ phosphor. The resonant-type energy transfer from Eu²⁺ to Mn²⁺ was demonstrated, and the energy transfer efficiency was also calculated according to their emission spectra. Based on the principle of energy transfer, the emission intensity ration of Eu²⁺ and Mn²⁺ could be appropriately tuned by adjusting the contents of activators. Due to the strong absorption in the 250–400 nm range, Na(Sr,Ba)PO₄:Eu²⁺, Mn²⁺ phosphor could be used as a potential candidate for near-UV white light-emitting diodes (LEDs).     

纳米棒状GdPO4:Eu3+荧光粉的合成及其发光性能的研究

采用溶解热法合成出了纳米棒状GdPO₄:Eu³⁺荧光粉,其中不同磷源和pH值对最终产物的形成起着关键的作用. 将纳米棒状和块体GdPO₄:Eu³⁺荧光粉的发光性能进行了对比,其中与块体GdPO₄:Eu³⁺荧光粉相比,纳米棒状GdPO₄:Eu³⁺荧光粉的色纯度得到了改善,而在激发光谱中,纳米棒状GdPO₄:Eu< 关键词： 纳米棒 磷酸钆 发光性能     

Optimization red emission of SrMoO4: Eu3+ via hydro-thermal co-precipitation synthesis using orthogonal experiment

In the present study, the SrMoO₄:Eu³⁺ phosphors has been synthesized through hydro-thermal co-precipitation method, and single factor and orthogonal experiment method was adopted to find optimal synthesis condition. It is interesting to note that hydro-thermal temperature is a prominent effect on the luminescent intensity of SrMoO₄:Eu³⁺ red phosphor, followed by co-precipitation temperature, calcining time, and the doping amount of Eu³⁺. The optimal synthesis conditions were obtained: hydro-thermal temperature is 145 °C, co-precipitation temperature is 35 °C, the calcining time is 2.5 h, and the doping amount of activator Eu³⁺ is 25%. Subsequently, the crystalline particle size, phase composition and morphology of the synthesized phosphors were evaluated by X-ray powder diffraction (XRD) and scanning electron microscopy (SEM). The results show that these phosphors possess a scheelite-type tetragonal structure, and the particle size is about 0.2 μm. Spectroscopic investigations of the synthesized phosphors are carried out with the help of photo-luminescence excitation and emission analysis. The studies reveal that SrMoO₄: Eu³⁺ phosphor efficiently convert radiation of 394 nm–592 and 616 nm for red light, and the luminescence intensity of SrMoO₄:Eu³⁺ phosphors is improved. SrMoO₄:Eu³⁺ phosphors may be a potential application for enhancing the efficiency of white LEDs.     

Thermally stable blue-emitting NaSrPO4:Eu phosphor for near UV white LEDs

A novel blue light emitting NaSr_1 − xPO₄:Eu²⁺_x (x = 0.001 to 0.02) phosphors were prepared by solid-state reaction method to investigate its optical properties and thermal stability for its application in white light-emitting diodes (w-LEDs). The excitation and emission spectra of the prepared phosphor reveal a broad emission peak centered at 460 nm which arises due to 4f-5d transitions of Eu²⁺ upon the near ultra-violet (n-UV) excitation wavelength at 380 nm. The effect of Eu²⁺ doping concentration and sintering temperature on the emission intensity of NaSrPO₄:Eu²⁺ was investigated along with its chromaticity coordinates. The temperature dependent luminescence properties of the prepared phosphor show better results than that of the commercial YAG:Ce³⁺phosphor. Besides, their XRD, FT-IR, SEM, TG, and DTA profiles have also been analyzed to explore its structural details.     

Luminescent properties of Mg3Ca3(PO4)4: Eu2+ blue-emitting phosphor for white light emitting diodes

A blue-emitting phosphor, Eu²⁺-activated Mg₃Ca₃(PO₄)₄ phosphor was synthesized by conventional solid-state reaction. X-ray powder diffraction (XRD) analysis confirmed the phase formation. Photoluminescence (PL) results showed that Mg₃Ca₃(PO₄)₄: Eu²⁺ could be efficiently excited by UV–visible light from 250 to 430 nm, which matched well with the emission wavelengths of near-UV and UV LED chips. The effects of the doped-Eu²⁺ concentration in Mg₃Ca₃(PO₄)₄: Eu²⁺ on the PL were also investigated. The result reveals that Mg₃Ca₃(PO₄)₄: Eu²⁺ is a potential blue-emitting phosphor for white LEDs.