含有BaMoO4纳米粒子的反胶束溶液与罗丹明B的相互作用

在三种带有不同电荷的表面活性剂构建的反胶束体系中(AOT/异辛烷、Oπ-10/环已烷、CTAB/正已醇)合成了BaMoO₄的纳米粒子, 采用透射电镜(TEM)观察其粒子呈球形, 粒径在17～46 nm范围内, 分布均匀; 使用染料罗丹明B作为探针, 采用紫外-可见光谱(UV-vis)和荧光光谱研究反胶束水池中罗丹明B与BaMoO₄纳米粒子的相互作用; 由于反胶束水池的空间和极性的限定, 染料的光谱特征与其在纯水中发生很大变化, 不同的反胶束体系中, 由于染料分子所处的微观环境不同, 导致其光谱特征也有较大区别.     

反胶束体系中水团的笼效应

在反胶束体系中研究了菁染料的吸收光谱以及ω值对菁染料荧光光谱的影响.讨论了不同粒径的AgCl纳米粒子对反胶束体系中菁染料的吸附状态及J-聚集体形成的影响.特别研究了反胶束水团空间限定效应对菁染料荧光量子产率及J-聚集体的影响.     

双重对象同时检测的新型荧光纳米粒子传感器的制备

报道了一种基于荧光共振能量转移理论合成的新型纳米粒子. 新型纳米粒子A中掺杂了由亲和素-生物素桥联并可发生荧光共振能量转移(FRET)的供体染料和受体染料; 新型纳米粒子B中只掺杂了供体染料. 在使用供体染料的特征激发波长同时激发纳米粒子A和B时, 纳米粒子A由于荧光共振能量转移而发射出受体染料的特征波长, 而纳米粒子B则只发射供体染料的特征波长. 这样, 在单一波长激发下, 可很容易地实现双重对象同时检测.     

金纳米微粒表面能量转移及半胱氨酸的高灵敏度高选择性分析法

根据荧光染料在金纳米粒子表面的能量转移,本文建立了一种具有高灵敏和高选择性半胱氨酸分析方法.研究表明,通过静电作用吸附在柠檬酸根包被的金纳米粒子表面的阳离子荧光染料如罗丹明B分子在受光激发时,发生从荧光染料到金属纳米微粒的能量转移,导致荧光染料的荧光猝灭.但当体系中存在半胱氨酸时,由于半胱氨酸与金纳米粒子之间具有更强的共价作用,罗丹明B分子远离金纳米粒子表面,降低了能量转移效率,使得罗丹明B的荧光得到恢复.恢复的荧光强度与0.025～4.5μmol/L半胱氨酸呈很好的线性关系,检测限为8.0nmol/L(3σ),而其他十九种基本氨基酸的响应非常微弱.     

纳米金-染料传感器阵列对汞(Ⅱ)的模式识别

采用纳米金、染料组合构成传感器阵列,通过可见光谱检测实现了对金属离子混合体系的模式识别。纳米金表面吸附染料在可见光谱区同时具有纳米金和染料的两个特定吸收峰,该光谱与染料结构、pH值有关,同时受金属离子影响。通过选择不同的染料(罗丹明、孔雀绿、亚甲蓝)和pH值(6.6,7.2和7.8),构建出一系列具有特征光谱的纳米金-染料传感器阵列,此传感器阵列对Hg2+-M2+(Pb2+/Cd2+/Mn2+/Zn2+)混合金属离子体系产生相应的可见光谱模式,并通过主成分分析法对该传感器阵列进行了筛选优化。结果表明,采用纳米金-罗丹明/孔雀绿/亚甲蓝在pH 7.8下构成的3个传感器,可实现Hg2+-M2+混合金属离子体系中浓度低至0.2μmol/L(1%)Hg2+的识别。     

AHOT/异辛烷反胶束体系制备铁酸钴纳米粒子

分别以阴离子表面活性剂二(2-乙基己基)丁二酸酯磺酸钠(AOT)和新型表面活性剂二(2-乙基己基)羟基丁二酸酯磺酸钠(AHOT)与异辛烷/水构建的反胶束体系为微反应器,合成了CoFe2O4纳米粒子;利用TGA,XRD,TEM等手段对产物进行了表征;讨论了两种表面活性剂构建的反胶束体系对产物合成过程及纳米粒子形貌和尺寸的影响.     

聚-3,4-乙烯二氧噻吩导电聚合物纳米粒子的制备及性能

采用反向胶束合成法, 以二乙基磺基琥珀酸钠(AOT)形成的反胶束为模板制备了导电聚合物聚-3,4-乙烯二氧噻吩(PEDOT)纳米粒子. 用紫外-可见-近红外光谱、红外光谱、X射线光电子能谱、扫描电子显微镜及透射电镜等手段对PEDOT粒子进行了表征. 研究了纳米粒子的导电性能并采用石英微天平(QCM)对纳米粒子的气敏特性进行了分析, 对相应导电机理及气体敏感机理进行了讨论.     

溶剂对反胶束法合成CdS纳米粒子粒径的影响

以磺基琥珀酸二辛酯钠盐(AOT)为保护剂,利用反胶束法在不同烷烃溶液中合成了CdS纳米粒子.采用紫外-可见光谱、透射电子显微镜、荧光光谱法对其进行表征.研究表明:在不同烷烃溶液中合成的CdS纳米粒子,其粒子大小和荧光强度都随溶剂而改变.     

憎水性三金属纳米粒子的合成、表征及磁性

以磺基琥珀酸二辛酯钠盐(AOT)为表面活性剂,采用反胶束法合成了憎水性CoFe/Au纳米粒子, 利用配体交换、水洗等去除AOT并使纳米粒子分级.采用紫外-可见光谱(UV-Vis)、透射电镜(TEM)、X射线衍射(XRD)、X射线电子能量散射(EDX)及等离子发射光谱 (ICP)等对产物进行了表征,通过超导量子干涉仪(SQIUD)研究了纳米粒子的磁性质.结果表明,反胶束法合成的CoFe/Au三金属纳米粒子具有较好的单分散性和稳定性,平均粒径约为4 nm.当外磁场强度为1.5×10⁴ A/m时,阻塞温度T_b为65 K,温度高于T_b时纳米粒子显示出超顺磁性,低于T_b时呈铁磁性,在5 K时其矫顽力(Hc)达4.67×10⁴ A/m.     

反向胶束法制备聚3,4-乙烯二氧噻吩纳米粒子的光电性能和热稳定性

采用聚合和掺杂同时进行的反向胶束体系制备了粒径分散较小的聚3,4-乙烯二氧噻吩(PEDOT)纳米粒子, 利用紫外-可见光光谱(UV-Vis)、X射线衍射(XRD)和扫描电子显微镜(SEM)等分析方法对纳米粒子进行了表征. 实验结果发现, 氧化剂用量、超声处理、聚合温度及掺杂程度对PEDOT纳米粒子的形貌、电性能及热稳定性有不同程度的影响. 根据实验结果对反向胶束法制备PEDOT纳米粒子过程进行优化发现, 在PEDOT纳米粒子聚合过程中, 甲基苯磺酸有效掺杂浓度约为0.17 mol/L时, PEDOT链的取向最规则, 在6.7°, 12.7°, 25°出现衍射峰, 掺杂剂的有效掺杂使得纳米粒子中分子链的取向不同, 并可以获得较高的电导率(>100 S/cm)的PEDOT纳米粒子, 当粒子的尺寸小于20 nm后电导率降低; 热失重法(TG)分析结果表明, PEDOT纳米粒子的热稳定性比普通块材好, 掺杂剂浓度对纳米粒子的热稳定性有一定影响.     

不同表面活性剂反胶束对纳米AgCl性能的影响

在反胶束中研究了直径10～14nm的AgCl微粒子与曙红间的作用,比较了阴离子型和非离子型表面活性剂组成的反胶束微环境效应.考察了AgCl粒子对曙红吸收光谱、荧光光谱及荧光寿命的影响.讨论了AgCl粒子对曙红荧光猝灭的机制,初步研究了稳定剂苯基巯基四氮唑及四氮茚对曙红-AgCl粒子反胶束体系的影响.     

Uniformly sized gold nanoparticles derived from PS-b-P2VP block copolymer templates for the controllable synthesis of Si nanowires

A monolayer of gold-containing surface micelles has been produced by spin-coating solution micelles formed by the self-assembly of the gold-modified polystyrene-b-poly(2-vinylpyridine) block copolymer in toluene. After oxygen plasma removed the block copolymer template, highly ordered and uniformly sized nanoparticles have been generated. Unlike other published methods that require reduction treatments to form gold nanoparticles in the zero-valent state, these as-synthesized nanoparticles are in form of metallic gold. These gold nanoparticles have been demonstrated to be an excellent catalyst system for growing small-diameter silicon nanowires. The uniformly sized gold nanoparticles have promoted the controllable synthesis of silicon nanowires with a narrow diameter distribution. Because of the ability to form a monolayer of surface micelles with a high degree of order, evenly distributed gold nanoparticles have been produced on a surface. As a result, uniformly distributed, high-density silicon nanowires have been generated. The process described herein is fully compatible with existing semiconductor processing techniques and can be readily integrated into device fabrication.     

Size-dependent interaction of silica nanoparticles with different surfactants in aqueous solution

The size-dependent interaction of anionic silica nanoparticles with ionic (anionic and cationic) and nonionic surfactants has been studied using small-angle neutron scattering (SANS). The surfactants used are anionic sodium dodecyl sulfate (SDS), cationic dodecyltrimethyl ammonium bromide (DTAB), and nonionic decaoxyethylene n-dodecylether (C(12)E(10)). The measurements have been carried out for three different sizes of silica nanoparticles (8, 16, and 26 nm) at fixed concentrations (1 wt % each) of nanoparticles and surfactants. It is found that irrespective of the size of the nanoparticles there is no significant interaction evolved between like-charged nanoparticles and the SDS micelles leading to any structural changes. However, the strong attraction of oppositely charged DTAB micelles with silica nanoparticles results in the aggregation of nanoparticles. The number of micelles mediating the nanoparticle aggregation increases with the size of the nanoparticle. The aggregates are characterized by fractal structure where the fractal dimension is found to be constant (D ≈ 2.3) independent of the size of the nanoparticles and consistent with diffusion-limited-aggregation-type fractal morphology in these systems. In the case of nonionic surfactant C(12)E(10), micelles interact with the individual silica nanoparticles. The number of adsorbed micelles per nanoparticle increases drastically whereas the percentage of adsorbed micelles on nanoparticles decreases with the increase in the size of the nanoparticles.     

Inorganic-organic hybrid nanoparticles from n-octyl triethoxy silane

Ormosil (organically modified silane) such as n-octyl triethoxy silane has been found to aggregate in the form of normal micelles as well as reverse micelles in which the triethoxy silane moeities are hydrolyzed to form a hydrated silica network while the n-octyl groups are held together through hydrophobic interaction. These nanoparticles are spherical in shape and are nearly monodispersed with an average diameter of below 100 nm. The nanoparticles originating from the micellar aggregate have an hydrophobic core with a layer of the hydrated silica network at the surface. The hydrophobic core can host hydrophobic molecules such as tetraphenyl porphyrin, which is leached out of the particles extremely slowly compared to that in Triton X-100 micelles. The nanoparticles originating from the reverse micelles have a hydrated silica network in the core surrounded by the hydrophobic n-octyl chains on the particle surface. The hydrophilic silica cores of these nanoparticles have been used to encapsulate horseradish peroxidase (HRP) and the enzyme shows its activity and follows Michaelis-Menten kinetics.     

反胶束笼对纳米氯化银反应性能的微环境限定

研究了反映束中直径为１０￣１７ｎｍ的ＡｇＣｌ微料与亚甲基蓝之间的作用，比较了阴离子型和非离子型表面活性剂组成的反胶束微环境的影响，讨论了亚甲基蓝在粒子上的吸附，二聚体形成的钠米ＡｇＣｌ粒子对亚甲基蓝荧光猝灭机制。     

反胶束笼对纳米氯化银反应性能的微环境限定

研究了反胶束中直径为10～17nm的AgCl微粒与亚甲基蓝之间的作用，比较了阴离子型和非离子型表面活性剂组成的反胶束微环境的影响，讨论了亚甲基蓝在粒子上的吸附，二聚体形成和纳米AgCl粒子对亚甲基蓝荧光猝灭机制．     

Novel shape evolution of BaMoO4 microcrystals

Dendritic BaMoO(4) microcrystals with lengths of about 5-15 microm were synthesized simply under ambient conditions by a microemulsion-mediated method within an ultrashort time. The products were characterized by X-ray powder diffraction (XRD), transmission electron microscopy (TEM), and field-emission scanning electron microscopy (FESEM), which showed that the products were in pure tetragonal BaMoO(4) structure and that an individual dendrite had a long central stem with four array shrunken branches. Detailed studies revealed that the formation of these 3-D structures was strongly dependent on the composition of the microemulsion. At prolonged aging time, the dendrites evolved into rods and further into particles, driven by the lattice distortion energy required to evolve the crystal from a metastable to a stable state. This novel crystal shape evolution provides insight into crystallization behavior given that the growth history and shape evolution process have traditionally been poorly understood.     

Photoreactive surfactants: a facile and clean route to oxide and metal nanoparticles in reverse micelles

A new class of photoreactive surfactants (PRSs) is presented here, consisting of amphiphiles that can also act as reagents in photochemical reactions. An example PRS is cobalt 2-ethylhexanoate (Co(EH)(2)), which forms reverse micelles (RMs) in a hydrocarbon solvent, as well as mixed reversed micelles with the standard surfactant Aerosol-OT (AOT). Small-angle neutron scattering (SANS) data show that mixed AOT/PRS RMs have a spherical structure and size similar to that of pure AOT micelles. Excitation of the ligand-to-metal charge transfer (LMCT) band in the PRSs promotes electron transfer from PRS to associated metal counterions, leading to the generation of metal and metal-oxide nanoparticles inside the RMs. This work presents proof of concept for employing PRSs as precursors to obtain nearly monodisperse inorganic nanoparticles: here both Co(3)O(4) and Bi nanoparticles have been synthesized at high metal concentration (10(-2) M) by simply irradiating the RMs. These results point toward a new approach of photoreactive self-assembly, which represents a clean and straightforward route to the generation of nanomaterials.     

Size Modulation of Polymeric Nanoparticles under Controlled Dynamics of Microemulsion Droplets

Polyacrylamide nanoparticles of different size (<100 nm) were prepared in reverse micelles under various dynamic conditions of micellar systems. The nanoparticles were always larger than the aqueous core in which they were formed; however, the size of the nanoparticles could be controlled if the interdroplet interaction and coalescence rate in reverse micelles were regulated. Factors such as interfacial rigidity of the droplets, size of the aqueous core, temperature, and concentrations of acrylamide (monomer) andN,N′-methylenebisacrylamide (crosslinking agent) have a profound effect on the size of nanoparticles. By adjustment of these parameters in reverse micelles, nanoparticles ranging from about 10 to more than 100 nm have been prepared.