Activated carbon aerogels with high bimodal porosity for lithium/sulfur batteries

Activated carbon aerogels (ACAs) with high bimodal porosity were obtained for lithium/sulfur batteries by potassium hydroxide (KOH) activation. Then sulfur–activated carbon aerogels (S–ACAs) composites were synthesized by chemical deposition strategy. The S–ACAs composites were characterized by field emission scanning electron microscopy (FESEM), transmission electron microscopy, and N₂ adsorption/desorption measurements. It is found that the activated carbon aerogels treated by KOH activation presents a porous structure, and sulfur is embedded into the pores of the ACAs network-like matrix after a chemical deposition process. The Li/S–ACAs (with 69.1 wt% active material) composite cathode exhibits discharge capacities of 1,493 mAh g^?1 in the first cycle and 528 mAh g^?1 after 100 cycles at a higher rate of C/5 (335 mA g^?1). The S–ACAs composite cathode exhibits better electrochemical reversibility, higher active material utilization, and less severe polysulfide shuttle than S–CAs composite cathode because of high bimodal porosity structure of the ACAs matrix.     

Mesoporous metal oxides by vapor infiltration and atomic layer deposition on ordered surfactant polymer films

Catalysis, chemical separations, and energy conversion devices often depend on well-defined mesoporous materials as supports or active component elements. Herein, we show that ordered assembled organic surfactant films can directly template porous inorganic solids with surface area exceeding 1000 m(2)/g by infusing the polymers with reactive inorganic vapors, followed by anneal. The specific surface area, pore size, chemical composition, and overall shape of the product material are tuned by choice of the polymer and precursor materials as well as the influsion and postinfusion treatment conditions. X-ray diffraction, infrared spectroscopy, and electron microscopy show that vapor infusion changes both the physical and chemical structure of the starting ordered polymer films, consistent with quantified trends in specific surface area and pore size distribution measured by nitrogen adsorption after film annealing. This method yields porous TiO(2) films, for example, that function as an anode layer in a dye-sensitized solar cell.     

热致相分离法偏二氯乙烯-氯乙烯共聚物多孔膜的制备及性能

以偏二氯乙烯-氯乙烯共聚物[P(VDC-co-VC)]为成膜聚合物, 邻苯二甲酸二甲酯(DMP)为稀释剂, 采用热致相分离(TIPS)法制备了具有多孔结构的P(VDC-co-VC)膜. 通过聚合物-稀释剂二元体系相图、 场发射扫描电镜(FESEM)、 差示扫描量热仪(DSC)、 X射线衍射(XRD)、 原子力显微镜(AFM)、 纯水通量、 接触角、 孔径及其分布、 截留率及力学性能等研究了聚合物含量对P(VDC-co-VC)多孔膜结构和性能的影响. 结果表明, P(VDC-co-VC)-DMP二元体系成膜过程以液-液(L-L)分相为主, 随着聚合物含量增加, 膜的横截面由类花瓣状结构向胞腔状结构转变, 膜的孔连通性降低, 结构变得较为致密, 同时膜上表面孔隙率降低, 粗糙度增大. L-L分相时间和聚合物含量的变化, 导致膜结晶度先降低后增大. 聚合物含量的增加使膜上表面接触角、 断裂强度及蛋白截留率增加, 但膜的平均孔径、 孔隙率及纯水通量先增加后减小. 当聚合物质量分数为30%时, 所得膜通透性较优, 断裂强度可达7.5 MPa.     

Fabrication of carbon fibers with nanoporous morphologies from electrospun polyacrylonitrile/poly(L‐lactide) blends

Porous carbon nanofibers were prepared through electrospinning a blend solution of polyacrylonitrile and poly(L ‐lactide), followed by carbonization at different temperatures and in different atmospheres. Structural features of these porous carbon nanofibers were characterized using scanning electron microscopy, transmission electron microscopy, thermogravimetric analysis, X‐ray powder diffraction, and Raman spectroscopy. Surface area and pore structure were evaluated using the nitrogen adsorption technique. It was found that carbon fibers prepared by this scalable and relatively economical method exhibited a porous surface morphology with high specific surface area and large pore volume. The fiber diameter, surface area, pore volume, bulky crystalline structure, and surface crystalline structure of these carbon nanofibers showed a strong dependence on the polymer precursor composition and carbonization condition. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 493–503, 2009     

CNTs/TiO2多孔复合膜的组装及光催化性能

提出了一种在掺氟的SnO2(FTO)导电玻璃上组装碳纳米管(CNTs)/Fe-Ni/TiO2多孔复合膜光催化剂的新方法.采用喷涂热解法(SPD)将掺杂镍和铁的含有嵌段聚合物P123的二氧化钛前驱体溶胶涂覆在FTO导电玻璃上,制备Fe-Ni/TiO2多孔膜,再采用化学气相沉积法(CVD)在Fe-Ni/TiO2膜上原位生长CNTs,得到CNTs/Fe-Ni/TiO2多孔复合膜光催化剂.CNTs/Fe-Ni/TiO2复合膜具有多级孔结构特征,在TiO2表面原位生长的CNTs不但具有较好的石墨化结构,且CNTs较均匀地分布在整个膜层的孔中.考察了CNTs/Fe-Ni/TiO2复合膜光催化剂的结构和性能,并通过降解甲基橙溶液评价了复合膜的光催化活性.结果表明,CNTs的复合及铁和镍的掺杂等改性显著提高了TiO2膜材料的光催化活性.     

Hydrogen-bonding versus van der Waals interactions in self-assembled monolayers of substituted isophthalic acids

Self-assembled monolayers of a series of isophthalic acids (5-octadecyloxyisophthalic acid, 5-decyloxyisophthalic acid, 5-hexyloxyisophthalic acid, and 5-pentyloxyisophthalic acid) formed on highly ordered pyrolytic graphite (HOPG) at the solid-liquid interface were studied using scanning tunneling microscopy (STM). Although these molecules have the same dicarboxyl headgroup, their hydrocarbon tails are of different lengths. Hydrogen-bonding between headgroups and van der Waals interactions between the hydrocarbon tails control the final morphology of the monolayer. The STM images show that both van der Waals interactions (vdWs) and hydrogen-bonding (H-B) compete to control the structure, but the final structure of the monolayer is determined by balance between the two interactions.     

Ordered mesoporous platinum@graphitic carbon embedded nanophase as a highly active, stable, and methanol-tolerant oxygen reduction electrocatalyst

Highly ordered mesoporous platinum@graphitic carbon (Pt@GC) composites with well-graphitized carbon frameworks and uniformly dispersed Pt nanoparticles embedded within the carbon pore walls have been rationally designed and synthesized. In this facile method, ordered mesoporous silica impregnated with a variable amount of Pt precursor is adopted as the hard template, followed by carbon deposition through a chemical vapor deposition (CVD) process with methane as a carbon precursor. During the CVD process, in situ reduction of Pt precursor, deposition of carbon, and graphitization can be integrated into a single step. The mesostructure, porosity and Pt content in the final mesoporous Pt@GC composites can be conveniently adjusted over a wide range by controlling the initial loading amount of Pt precursor and the CVD temperature and duration. The integration of high surface area, regular mesopores, graphitic nature of the carbon walls as well as highly dispersed and spatially embedded Pt nanoparticles in the mesoporous Pt@GC composites make them excellent as highly active, extremely stable, and methanol-tolerant electrocatalysts toward the oxygen reduction reaction (ORR). A systematic study by comparing the ORR performance among several carbon supported Pt electrocatalysts suggests the overwhelmingly better performance of the mesoporous Pt@GC composites. The structural, textural, and framework properties of the mesoporous Pt@GC composites are extensively studied and strongly related to their excellent ORR performance. These materials are highly promising for fuel cell applications and the synthesis method is quite applicable for constructing mesoporous graphitized carbon materials with various embedded nanophases.     

Effects of crosslinker density on the polymer network structure in poly‐N,N‐dimethylacrylamide hydrogels

To investigate the effects of crosslinker density on the properties of hydrogels, compression tests, scanning electron microscopy (SEM), differential scanning calorimetry (DSC), and Raman measurements were performed on poly‐N,N‐dimethylacrylamide hydrogels. The results of the compression tests showed that the Young's modulus increases as the crosslinker density increases. To understand the mechanism of the change in the mechanical properties, the structures of the polymer networks and water and the molecular vibrations were analyzed using SEM, DSC, and Raman methods. From the SEM images, it was found that the porosity estimated from the mesh size and cell density increases with increasing crosslinker density. In addition, the DSC and Raman results show that the thickness of the bound water increases as the porosity increases, although the density of the polymer chains in the porous wall remains nearly constant. The increase in the number density of polymer chains can be one of the mechanisms contributing to the increase in the mechanical strength of the hydrogels at lower crosslinker density below 5 mol %, as proposed by previous studies. At higher crosslinker density, however, the number density of polymer chains does not increase with increasing crosslinker density. The present results suggest that the bound water plays an important role in strengthening the hydrogel. The water structure may be one of the dominant factors governing the chemical and physical properties of hydrogels. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013 , 51, 1017–1027     

电化学组装法制备对-巯基苯胺/聚苯胺纳米有序导电聚合物膜

提出了制备二维纳米有序有机导电聚合物膜的新方法--电化学组装法,应用该方法在电位脉冲的作用下使苯胺聚合到对-巯基苯胺修饰的金电极上,获得了致密、有序的对-巯基苯胺/聚苯胺(p-aminothiolphenol/polyaniline,PATP/PANI)导电寡聚物薄膜.用STM研究了Au(111)/PATP、Au(111)/PATP/PANI膜表面的二维有序性,用SERS谱表征了Au(粗糙表面)/PATP、Au(粗糙表面)/PATP/PANI膜的结构和成分,并以[Fe(CN)₆]^3-/[Fe(CN)₆]^4-为探针研究了其电子传递性能.结果表明用电化学组装法制备的PATP/PANI膜在纳米尺度上是二维有序的,且具有良好的电子传递性能.     

Polymer-assisted formation of giant polyoxomolybdate structures.

A highly ordered, porous nanoscale network structure of polyoxomolybdate was prepared from the slow decomposition of an unstable precursor compound MoO(2)(OH)(OOH) in the presence of PEO-containing triblock copolymer gels or semidilute/concentrated poly(ethylene oxide) (PEO) homopolymer solutions. Small-angle X-ray scattering (SAXS) and wide-angle X-ray diffraction (WAXD) measurements of the 1-microm size crystals revealed an extremely ordered primitive cubic (pc) structure made of polyoxomolybdates. Scanning electron microscopy (SEM) measurements showed that the overall size of these single crystals was close to 1 microm, in agreement with estimates from the scattering peak widths. Evidence from both scattering measurements and transmission electron microscope (TEM) measurements suggested that the system formed a highly porous primitive cubic network similar to that of certain zeolite structures. However, the observed lattice constant of 5 nm was much larger. The function of the PEO-containing polymer network was found to be very subtle and complex. Presumably, PEO acted simultaneously as a weak reducing agent and as a viscous matrix to ensure sufficient time for the formation of long-range ordered structures, resulting in the growth of extremely uniform but probably hollow "nanospheres". We suggest that this new material may find unique applications as a high-efficiency absorbent or catalyst. Furthermore, the current synthetic method may open up new pathways to prepare similar functional nanomaterials.     

三维有序多孔图案化SiC陶瓷的制备

结合毛细管微模塑技术、模板技术和先驱体转化技术, 以图案化聚二甲基硅氧烷(PDMS)弹性体为模具,以氧化硅凝胶小球为模板, 以液态聚碳硅烷(PCS)为先驱体, 经过氧化硅凝胶小球图案化模板的形成, 先驱体的渗入, 模板中先驱体的交联, 弹性模具的去除, 图案化先驱体的无机化和模板的去除, 制备了图案化多孔SiC 陶瓷.研究结果表明：所制备的图案化多孔陶瓷中, 图案的尺寸受图案化PDMS 弹性模具的控制, 球形孔的孔径可由氧化硅凝胶小球来调节. 图案化陶瓷中球形孔不仅三维有序排列, 而且由于模板中小球的相互接触形成的“窗 口”使球形孔三维贯通.     

利用呼吸图案法制备聚(苯乙烯-b-丙烯腈)有序多孔薄膜

以自制的聚(苯乙烯-b-丙烯腈)(PS-b-PAN)嵌段共聚物为成膜材料, 采用呼吸图案法制备了有序多孔薄膜, 采用扫描电子显微镜(SEM)对薄膜形貌进行了分析, 研究了聚合物浓度、溶剂种类及共聚物结构对薄膜结构的影响. 结果表明, 薄膜表层为多孔结构, 且孔为圆形、以六方阵列形式排列; 薄膜表层下面是蜂窝状结构.以三氯甲烷(CHCl₃)为溶剂时, 在较高浓度下制备的薄膜表层孔间距较大, 蜂窝结构尺寸较小, 且形成了多层结构. 与CHCl₃为溶剂时相比, 挥发速度较快的二硫化碳(CS₂)作溶剂时制备的多孔薄膜有序性较好, 薄膜表层孔径和孔间距均较大, 蜂窝结构尺寸较小. 以没有PAN链段的聚苯乙烯大分子引发剂(PS-Cl)为成膜材料时, 制备的薄膜表层没有形成多孔结构, 而是形成了窝状结构. 同时, 通过对薄膜表层晕的研究证明了多孔薄膜表层缺陷是由水滴处于液膜下较深的位置造成的.     

Low‐Temperature Sol‐Gel Synthesis of Nanostructured Polymer/Titania Hybrid Films based on Custom‐Made Poly(3‐Alkoxy Thiophene)

A low‐temperature route to directly obtain polymer/titania hybrid films is presented. For this, a custom‐made poly(3‐alkoxy thiophene) was synthesized and used in a sol‐gel process together with an ethylene‐glycol‐modified titanate (EGMT) as a suitable titania precursor. The poly(3‐alkoxy thiophene) was designed to act as the structure‐directing agent for titanium dioxide through selective incorporation of the titania precursor. The nanostructured titania network, embedded in the polymer matrix, is examined with atomic force microscopy (AFM) and scanning electron microscopy (SEM) measurements. By means of the scattering technique grazing incidence wide‐angle X‐ray scattering (GIWAXS), a high degree of crystallinity of the polymer as well as successful transformation of the precursor into the rutile phase of titania is verified. UV/Vis measurements reveal an absorption behavior around 500 nm which is similar to poly(3‐hexyl thiophene), a commonly used polymer for photoelectronic applications, and in addition, the typical UV absorption behavior of rutile titania is observed.     

Atomic structure of highly ordered pyrolytic graphite doped with boron

Boron-doped carbon was prepared by the high-temperature reaction of B₂O₃ with the highly ordered pyrolytic graphite (HOPG). In order to reveal the effect of the boron doping on the HOPG structure, several experimental tools were employed such as X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), scanning tunneling microscopy (STM), and atomic force microscopy (AFM). While the interlayer spacing of the graphite plane remains virtually unchanged, the boron doping makes the graphite plane of HOPG more disordered. Both the STM and the AFM studies show that the boron-doped HOPG surface is deformed not only in its bonding geometry, but also in its electronic structure. The overall results imply that the boron atom is substituted for the carbon atom rather than is intercalated into the graphite layers.     

Modification of Activated Carbon Fibers and Their Characterizes of Adsorption for Xenon

Activated carbon fibers (ACFs) are characterizes by their highly developed internal surface area and porosity. Especially the development of micro- and mesopores is of great importance because it allows the carbons to adsorb large amounts and various types of chemicals from gases or liquids. Due to such a valuable feature, activated carbon fibers have been in use for many years. Porous carbon materials have now become extremely versatile adsorbents of major industrial significance. The high surface area and porosity of activated carbon fibers are the result of the activation process; physical or chemical activation. However, the complexity of the carbon structure, although voluminous research has been done and great effort has been made toward the control of pore size and its distribution^[1-3]. The recent development of industrial technology provides new application fields for porous carbons and,at the same time, requires the carbon to have a desired pore structure. To meet such a requirement, many novel approaches to control pore structure have been proposed.     

Single-molecule chemistry and physics explored by low-temperature scanning probe microscopy

It is well known that scanning probe techniques such as scanning tunnelling microscopy (STM) and atomic force microscopy (AFM) routinely offer atomic scale information on the geometric and the electronic structure of solids. Recent developments in STM and especially in non-contact AFM have allowed imaging and spectroscopy of individual molecules on surfaces with unprecedented spatial resolution, which makes it possible to study chemistry and physics at the single molecule level. In this feature article, we first review the physical concepts underlying image contrast in STM and AFM. We then focus on the key experimental considerations and use selected examples to demonstrate the capabilities of modern day low-temperature scanning probe microscopy in providing chemical insight at the single molecule level.     

Biochar as a precursor of activated carbon

Biochar was evaluated as a precursor of activated carbon. This product was produced by chemical activation using potassium hydroxide. The effects of operating conditions of activation process, such as temperature, activating agent to biochar mass ratio, and nitrogen flow rate, on the textural and chemical properties of the product were investigated. Activated carbon produced by this method has internal surface area at least 50 times than that of the precursor and is highly microporous, which is also confirmed by scanning electron microscopy analysis. Fourier-transform infrared spectroscopy analysis showed development of aromatization in the structure of activated carbon. X-ray diffraction data indicated the formation of small, two-dimensional graphite-like structure at high temperatures. Thermogravimetric study showed that when potassium hydroxide to biochar mass ratio was more than one, the weight loss decreased.     

Biochar as a precursor of activated carbon

Biochar was evaluated as a precursor of activated carbon. This product was produced by chemical activation using potassium hydroxide. The effects of operating conditions of activation process, such as temperature, activating agent to biochar mass ratio, and nitrogen flow rate, on the textural and chemical properties of the product were investigated. Activated carbon produced by this method has internal surface area at least 50 times than that of the precursor and is highly microporous, which is also confirmed by scanning electron microscopy analysis. Fourier-transform infrared spectroscopy analysis showed development of aromatization in the structure of activated carbon. X-ray diffraction data indicated the formation of small, two-dimensional graphite-like structure at high temperatures. Thermogravimetric study showed that when potassium hydroxide to biochar mass ratio was more than one, the weight loss decreased.     

Hydrogen and deuterium exchange on Pt(111) and its poisoning by carbon monoxide studied by surface sensitive high-pressure techniques

Catalytic hydrogen/deuterium exchange on a platinum (111) single crystal and its poisoning with carbon monoxide was studied using scanning tunneling microscopy (STM), X-ray photoelectron spectroscopy (XPS), sum frequency generation vibrational spectroscopy (SFG), and mass spectrometry under reaction conditions at pressures in the mTorr to atmospheric range. At 298 K and in the presence of 200 mTorr of hydrogen and 20 mTorr of deuterium the surface is catalytically active, producing HD with activation energy of approximately 5.3 kcal/mol. Addition of 5 mTorr of CO stops the reaction completely. In situ STM images reveal an ordered surface structure of chemisorbed CO. At 353 K the addition of 5 mTorr of CO slows the reaction by 3 orders of magnitude, but HD production continues with an activation energy of 17.4 kcal/mol. Changes in coverage and adsorption site of CO were followed by XPS and SFG up to a temperature of 480 K. From these data, a CO dominated, mobile and catalytically active surface model is proposed.     

磁性金属镍纳米管的有效合成

以多孔氧化铝为模板, 三嵌段共聚物F127(EO108PO69EO108, EO: ethylene oxide, PO: propylene oxide)为添加剂, 采用电化学沉积技术, 制备了高度有序的磁性金属镍纳米管阵列. 该合成方法简单、有效、易操作, 特别是, 氧化铝模板的孔壁不需要进行任何修饰. 通过透射电子显微镜(TEM)、扫描电子显微镜(SEM)、X射线衍射(XRD)和振动样品磁强计(VSM)对产物的形貌、结构和磁学性质进行表征. X射线衍射(XRD)分析表明, 产物的晶型结构为面心立方. 利用透射电子显微镜研究了实验参数, 如电流密度、共聚物浓度和电沉积时间, 对产物形貌的影响, 结果表明, 镍纳米管的管壁厚度随着电流密度增大和电沉积时间的延长而变大, 但几乎不受F127浓度变化的影响. 以上的实验表明, 调节实验参数, 可以有效控制纳米管管壁的厚度. 磁性研究结果表明, 与块体镍相比较, 镍纳米管阵列表现出较大的矫顽力.