Properties of ferromagnetic resonance in Fe<Subscript>73.5</Subscript>CuNb<Subscript>3</Subscript>Si<Subscript>13.5</Subscript>B<Subscript>9</Subscript> nanocrystalline alloys

The structural properties and parameters of ferromagnetic resonance have been studied for Fe_73.5CuNb₃Si_13.5B₉ nanocrystalline alloys produced from the initial amorphous state via annealing under different conditions. The dependence of the linewidth of the ferromagnetic resonance on the grain size ΔH ∼ D ⁶ has been found. The result is discussed within the framework of the random magnetic anisotropy model.     

Effect of nanocrystallization on the mechanical and magnetic properties of finemet-type alloy (Fe<Subscript>78.5</Subscript>Si<Subscript>13.5</Subscript>B<Subscript>9</Subscript>Nb<Subscript>3</Subscript>Cu<Subscript>1</Subscript>)

The kinetics of primary crystallization and the effect of structural parameters of the precipitating nanocrystalline α-phase Fe-Si on changes in microhardness, coercive force, and saturation magnetization in an amorphous Finemet-type 5BDSR alloy (Fe_78.5Si_13.5B₉Nb₃Cu₁) obtained by melt quenching are studied. It is found that both an increase in bulk density and an increase in the average nanoparticle size contribute to the hardening of the amorphous/nanocrystalline alloy.     

Magnetic properties and the magnetoimpedance effect of nanostructured Fe<Subscript>73.5</Subscript>Si<Subscript>16.5</Subscript>B<Subscript>6</Subscript>Nb<Subscript>3</Subscript>Cu<Subscript>1</Subscript> ribbons with induced magnetic anisotropy

The structure and magnetic properties and the magnetoimpedance effect of nanocrystalline Fe_73.5Si_16.5B₆Nb₃Cu₁ alloy ribbons, obtained from the amorphous state by annealing under different conditions, were comparatively analyzed. Despite the similarity of the samples’ structural states and the processes of their quasi-static magnetization reversal, the features of the magnetoimpedance effect are indicative of significant differences in the processes of their dynamic magnetization.     

Temperature dependence of the magnetic properties and magnetoimpedance of nanocrystalline Fe<Subscript>73.5</Subscript>Si<Subscript>16.5</Subscript>B<Subscript>6</Subscript>Nb<Subscript>3</Subscript>Cu<Subscript>1</Subscript> ribbons

The temperature dependences of the magnetic properties and the magnetoimpedance effect of soft magnetic nanocrystalline Fe_73.5Si_16.5B₆Nb₃Cu₁ alloy ribbons are studied in the temperature range 24–160°C. A high temperature sensitivity of the impedance and the magnetoimpedance effect of the ribbons are detected in the ac frequency range 0.1–50 MHz. At an ac frequency of 50 MHz, the change in the impedance reaches 0.2 Ω/°C (0.5%/°C) in the temperature range 85–160°C. When the temperature increases, a monotonically decreasing character of the dependence of the magnetoimpedance effect on the applied magnetic field changes into a dependence having an increasing initial segment. The effect of temperature on the magnetoimpedance properties of the soft magnetic nanocrystalline ribbons is shown to result from temperature-induced changes in their electrical conductivity, magnetization, and effective magnetic anisotropy.     

Influence of the special features of the effective magnetic anisotropy on the temperature dependences of the magnetoimpedance of nanocrystalline Fe<Subscript>73.5</Subscript>Si<Subscript>16.5</Subscript>B<Subscript>6</Subscript>Nb<Subscript>3</Subscript>Cu<Subscript>1</Subscript> strips

The influence of the thermal treatment type on the temperature dependences of the magnetoimpedance of nanocrystalline Fe_73.5Si_16.5B₆Nb₃Cu₁ alloy strips is investigated. The main mechanisms determining the temperature behavior of the magnetoimpedance of strips with induced magnetic anisotropy having various special features are established. The prospects for application of the alloy strips nanocrystallized in the presence of a magnetic field as sensitive elements of temperature sensors and special magnetic field detectors are demonstrated.     

<Emphasis Type="Italic">In situ</Emphasis> X-ray diffraction study of structural evaluation in Fe<Subscript>73</Subscript>Cu<Subscript>1.5</Subscript>Nd<Subscript>3</Subscript>Si<Subscript>13.5</Subscript>B<Subscript>9</Subscript> amorphous alloy at high temperature

The thermodynamics structural relaxation of Fe₇₃Cu_1.5Nd₃Si_13.5B₉ amorphous alloy from room temperature to 400°C has been investigated by measuring the structure factor with in situ X-ray diffraction. The structural information of the atomic configuration such as radial distribution function (RDF) and neighbor atomic distance was gained by Fourier transformation. The research result shows that the amorphous structure remains stable in the temperature range of 30 to 400°C but exhibits distinct changes in local atomic configuration with the increase of temperature. The quantitative determination of the neighbor atomic distance suggests that the degree of short-range order changes by the temperature altering the second nearest neighbor local atomic configuration of the amorphous when structural relaxation occurs. Supported by the Natural Science Foundation of Hebei Province of China (Grant No. A2007000296), the National Natural Science Foundation of China (Grant No. 50731005), SKPBRC (Grant Nos. 2007CB616915 and 2006CB605201), and PCSIRT (Grant No. IRT0650)     

Atomic and magnetic structures of Fe<Subscript>70</Subscript>Al<Subscript>5</Subscript>B<Subscript>25</Subscript> amorphous alloys

The short-range order around boron, aluminum, and iron atoms in Fe₇₅B₂₅ and Fe₇₀Al₅B₂₅ amorphous alloys has been studied by ¹¹B and ²⁷Al nuclear magnetic resonance at 4.2 K and ⁵⁷Fe Mössbauer spectroscopy at 87 and 295 K. The average magnetic moment of iron atoms μ(Fe) in these alloys has been measured by a vibrating sample magnetometer. It has been revealed that the substitution of aluminum atoms for iron atoms does not disturb μ(Fe) in the Fe₇₀Al₅B₂₅ alloy, gives rise to an additional contribution to the ¹¹B NMR spectrum in the low-frequency range, and shifts maxima of the distribution of hyperfine fields at the ⁵⁷Fe nuclei. In the Fe₇₀Al₅B₂₅ amorphous alloy, the aluminum atoms substitute for iron atoms in the nearest coordination shells of boron and iron atoms. This alloy consists of nanoclusters in which boron and iron atoms have a short-range order of the tetragonal Fe₃B phase type.     

Inverted near-surface hysteresis loops in heterogeneous (nanocrystalline/amorphous) Fe<Subscript>81</Subscript>Nb<Subscript>7</Subscript>B<Subscript>12</Subscript> alloys

Inverted hysteresis loops were observed for the first time in the near-surface layers of heterogeneous (nanocrystalline/amorphous) Fe₈₁Nb₇B₁₂ alloys. In particular, a negative residual magnetization is observed when a positive magnetic field applied in the sample plane is decreased to zero. The inverted hysteresis is qualitatively explained within the framework of a two-phase model, according to which the heterogeneous alloys contain two dissimilar phases exhibiting uniaxial magnetic anisotropy and featuring antiferromagnetic exchange interaction.     

Glass-forming ability and thermal stability of Fe<Subscript>62</Subscript>Nb<Subscript>8−x</Subscript>Zr<Subscript>x</Subscript>B<Subscript>30</Subscript> and Fe<Subscript>72</Subscript>Zr<Subscript>8</Subscript>B<Subscript>20</Subscript> amorphous alloys?

Glass-forming ability (GFA) and thermal stability of Fe₆₂Nb₈B₃₀, Fe₆₂Nb₆Zr₂B₃₀ and Fe₇₂Zr₈B₂₀ at % amorphous alloys were investigated by calorimetric (DSC and DTA) measurements. The crystallization kinetics was studied by DSC in the mode of continuous versus linear heating and it was found that both the glass transition temperature, T _g , and the crystallization peak temperature, T _p , display strong dependence on the heating rate. The partial replacement of Nb by Zr leads to lower T _g and T _x temperatures and causes a decrease of the supercooled liquid region. JMA analysis of isothermal transformation data measured between T _g and T _x suggests that the crystallization of the Fe₆₂Nb₈B₃₀ and Fe₆₂Nb₆Zr₂B₃₀ amorphous alloys take place by three-dimensional growth with constant nucleation rate. Nb enhances the precipitation of the metastable Fe₂₃B₆ phase and stabilizes it up to the third crystallization stage. Zr addition increases the lattice constant of Fe₂₃B₆ and, at the same time, decreases the grain size.     

Chemical Structure of Fe<Subscript>78</Subscript>B<Subscript>13</Subscript>Si<Subscript>9</Subscript> Alloy Surface Layers in the Solid and Liquid States

The chemical structure of Fe₇₈B₁₃Si₉ alloy in the solid and liquid states and local atomic environment are studied in situ by X-ray photoelectron spectroscopy (XPS). The chemical bonds between elements in the melt are analyzed during a temperature increase. Two temperature regions are identified. The liquid surface in the first temperature region is shown to contain clusters of Fe-Si and (Fe-O _x )-Si types. In the second one, clusters of Fe-B and (Fe-O _x )-B types dominate. It is impossible to determine the composition of the clusters definitively using XPS data only. A jump-like change in the composition of the surface layers of the melt is detected, which is interpreted as structural transformations within the liquid state.     

Fe<Subscript>3</Subscript>P impurity phase in high-quality LiFePO<Subscript>4</Subscript>: X-ray diffraction and neutron-graphical studies

High discharge capacity and long life cycles of electrodes fabricated from various LiFePO₄ powders have been used to select samples for detailed structural studies. In some samples, the presence of ferromagnetic Fe₃P crystallites was revealed by the synchrotron X-ray diffraction analysis, with the integral intensity ratio of the peaks Fe₃P (231) and LiFePO₄ (112) equal to ～1/12. Small-angle polarized neutron scattering (SAPNS) detected the presence of magnetic nuclear contrasting regions with size of 17 ± 1 nm. The average diameter of LiFePO₄ crystallites is 230 nm, and Fe₃P crystallites were found as 17 × 54 nm² plates. The high quality of these samples was provided by their manufacturer via synthesis of the Fe₃P impurity phase. It can be stated that the set of studies, developed in the study, is helpful in a search for new effective impurity phases and in optimization of their parameters.     

Magnetic domain and local atomic structures of the Fe<Subscript>0.94</Subscript>Si<Subscript>0.06</Subscript> alloy before and after thermomagnetic treatment in an alternating-current magnetic field

The changes observed in the local atomic structure of an iron alloy with 6 at % Si as a result of thermomagnetic treatment in an alternating-current magnetic field and their correlation with magnetic characteristics, such as the domain structure and magnetic properties, have been investigated using Mössbauer spectroscopy. It has been shown that the destabilization of the domain structure is caused by the destruction of uniaxial magnetic anisotropy in domains due to a disordered distribution of pairs of silicon atoms along the 〈100〉 easy magnetization axes. Annealing and cooling without an external magnetic field and in an alternating-current magnetic field lead to a change in the magnetic texture of single-crystal samples of the siliconiron alloy. When the samples are annealed in an alternating-current magnetic field, the magnitude of this effect depends on the orientation of the magnetic field with respect to the crystallographic axes of the sample.     

Magnetic structure and magnetic excitations in the two-dimensional spin system of the Cu<Subscript>3</Subscript>B<Subscript>2</Subscript>O<Subscript>6</Subscript> compound

This paper reports on the results of measurements of the magnetic susceptibility, heat capacity, neutron scattering, muon spin relaxation, and electron paramagnetic resonance in Cu₃B₂O₆ for the study of the ground state of the spin system of this compound. The results obtained suggest that, at a temperature of 10 K, the spin subsystem of the crystal, which consists of single spins and clusters of pairs and fours of spins interacting with one another, undergoes a transition to a state representing a superposition of the singlet (for clusters) and magnetically ordered (for single spins) states.     

One-dimensional AGMI sensor with Co<Subscript>66</Subscript>Fe<Subscript>4</Subscript>Si<Subscript>15</Subscript>B<Subscript>15</Subscript> ribbon as sensing element

A novel asymmetric giant magneto impedance (AGMI) sensor was developed and the performance of the sensor was carefully studied. This one dimensional sensor can be further developed as a two-dimensional compass that can be used for navigational purposes. We used commercial Metglas 2714A ribbon. The sensor uses Co₆₆Fe₄Si₁₅B₁₅ ribbon as a sensing element. The results showed for high sensitivity and resolution. The GMI sensor consists of a crystal oscillator voltage to current converter for providing the current to the sample, a differential amplifier, successive amplifier stages, multiplier, and cascaded low-pass filters. The observed sensitivity was 25 V/Oe. Angle sensitivity was found to be 2 mV/degree. Our sensor showed excellent linearity when compared with previous sensors [13, 14]. These sensors require dc bias coils and two sensor elements to attain good linearity. PACS 85.75.Ss; 85.70.Ay; 85.70.-w; 85.75.-d; 75.30.Gw; 75.50.Kj; 75.90.+w     

Magnetic and Mössbauer Studies of Fe<Subscript>76</Subscript>Mo<Subscript>8</Subscript>Cu<Subscript>1</Subscript>B<Subscript>15</Subscript> Nanocrystalline Alloy

The influence of different degrees of crystallinity on the magnetic behaviour of heat-treated nanocrystalline Fe₇₆Mo₈Cu₁B₁₅ alloy has been investigated using a combination of Mössbauer spectrometry and magnetic measurements. The evolution of magnetically active regions and their growth with rising contents of nanocrystals are followed by distributions of hyperfine interactions. Combined electric quadrupole and magnetic dipole interactions corresponding to non-magnetic and magnetic regions inside the amorphous phase, respectively, were revealed. A deterioration of the soft-magnetic properties takes place for the samples exhibiting low fraction of crystallinity. The very good soft-magnetic behaviour is regained for the samples where the primary crystallization process is almost finished.     

Effect of external actions on the magnetic properties and corrosion resistance of Co<Subscript>70.5</Subscript>Fe<Subscript>0.5</Subscript>Cr<Subscript>4</Subscript>Si<Subscript>7</Subscript>B<Subscript>18</Subscript> amorphous alloy

Variations in the magnetic characteristics (specific saturation magnetization and coercive force) of Co–Fe–Cr–Si–B amorphous alloy (AA) are studied after high-pressure torsion (HPT) and heat treatment. The behavior of AA magnetic properties is analyzed with respect to structural transformations caused by external actions. The corrosion resistance of AA upon transitioning from an amorphous to a crystalline state is investigated. The established optimum annealing and HPT conditions yield a satisfactory combination of the magnetic properties and corrosion resistance of the investigated alloy.     

Magnetic and Mössbauer Studies of Fe<Subscript>76</Subscript>Mo<Subscript>8</Subscript>Cu<Subscript>1</Subscript>B<Subscript>15</Subscript> Amorphous Alloy

“Zero field”-Mössbauer and magnetization measurements have been performed on an amorphous Fe₇₆Mo₈Cu₁B₁₅ alloy in the temperature range of (10-340) K. The room-temperature Mössbauer spectrum exhibits magnetic dipole and electric quadrupole interactions. At approximately 306 K, the magnetic interactions vanish and the alloy shows fully paramagnetic behavior. On the other hand, the relative representation of paramagnetic component becomes weak with decreasing temperature and below 220 K the magnetic dipole interactions prevail. Below this temperature an anomaly in the low-temperature dependencies of ac susceptibility and of magnetization, measured during cooling the specimen from 340 K down to 20 K is observed. The anomaly on the magnetization curve vanishes in the field of 200 Oe.     

Dependence of the optical properties of Fe<Subscript>78</Subscript>Si<Subscript>10</Subscript>B<Subscript>12</Subscript> amorphous alloy on its structural state

The optical properties of Fe₇₈Si₁₀B₁₂ ferromagnetic alloy in amorphous, crystalline, and intermediate structural states have been investigated by ellipsometry in the spectral range of 0.22–18 μm. It is established that alloy crystallization leads to a significant change in the optical constants and the frequency dependences of the dielectric functions calculated based on these optical constants. The structural reconstruction under heat treatment leads to an increase in the intensity and shift of interband absorption bands. The plasma and relaxation frequencies of conduction electrons are determined; their numerical values also depend on the degree of atomic ordering.     

Effect of uniaxial tension and hydrostatic compression on the geometry and morphology of amorphous Fe<Subscript>77</Subscript>Ni<Subscript>1</Subscript>Si<Subscript>9</Subscript>B<Subscript>13</Subscript> alloy ribbon surface

The effect of hydrostatic pressure and uniaxial compression on the relief of an amorphous Fe₇₇Ni₁Si₉B₁₃ alloy ribbon surface was studied using scanning tunneling and atomic-force microscopy. The fracture surfaces of samples were also studied. It is found that both the initial surfaces and the surfaces of samples subjected to hydrostatic compression or tension, as well as fracture surfaces, are fractal or multifractal, but their fractality parameters are different. Hydrostatic pressure decreases the surface roughness and the average fractal dimension of the surface on both sides of the ribbons. The dependence of the surface fractal characteristics on tension is more complex. Prior to the occurrence of a “critical event” on the surface (formation of a deformation band or a through crack), the Hölder index and the half-width of the singularity spectrum decrease. The correlation is discussed between the fractal characteristics of the ribbon surface and those of a fracture surface, and the role of an excess free volume in the initiation of fracture of amorphous alloys is analyzed.     

Low-temperature properties of ordered Cu<Subscript>3</Subscript>Pd-based alloys

The effect of atomic disordering and alloying with d elements (Fe, Pd, Cu) on the transport and magnetic properties of Cu₃Pd alloys has been investigated at low temperatures (T < 80 K) in strong magnetic fields (H ≤ 8 MA/m). The specific features of the crystal structure and temperature and field dependences of the electrical resistance, magnetoresistance, Hall effect, and magnetic susceptibility of Cu₇₂Pd₂₈, Cu₇₅Pd₂₅, Cu₈₀Pd₂₀ and Cu_74.5Pd_24.5Fe₁ alloys are discussed.