ANLYTICAL SOLUTION OF THERMOELASTIC DAMPING IN RECTANGULAR MINDLIN MICRO PLATES 1)

首次给出了四边简支的 Mindlin 矩形微板热弹性阻尼的解析解. 基于考虑一阶剪切变形的 Mindlin 板理论和单向耦合热传导理论建立了微板热弹性耦合自由振动控制微分方程. 忽略温度梯度在面内的变化,在上下表面绝热边界条件下求得了用变形几何量表示的温度场的解析解. 进一步将包含热弯曲内力的结构振动方程转化为只包含挠度振幅的四阶偏微分方程. 利用特征值问题之间在数学上的相似性,在四边简支条件下给出了用无阻尼 Kirchhoff 微板的固有频率表示的 Mindlin 矩形微板的复频率解析解,从而利用复频率法求得了反映热弹性阻尼水平的逆品质因子. 最后,通过数值结果定量地分析了剪切变形、材料以及几何参数对热弹性阻尼的影响 规律. 结果表明,Mindlin 板理论预测的热弹性阻尼小于 Kirchhoff 板理论预测的热弹性阻尼. 两种理论预测的热弹性阻尼之间的差值在临界厚度附近十分显著. 另外,随着微板的边/厚比增大,Mindlin 微板的热弹性阻尼最大值单调增大,而 Kirchhoff 微板的热弹性阻尼最大值却保持不变.     

Mindlin 矩形微板的热弹性阻尼解析解

首次给出了四边简支的 Mindlin 矩形微板热弹性阻尼的解析解. 基于考虑一阶剪切变形的 Mindlin 板理论和单向耦合热传导理论建立了微板热弹性耦合自由振动控制微分方程. 忽略温度梯度在面内的变化,在上下表面绝热边界条件下求得了用变形几何量表示的温度场的解析解. 进一步将包含热弯曲内力的结构振动方程转化为只包含挠度振幅的四阶偏微分方程. 利用特征值问题之间在数学上的相似性,在四边简支条件下给出了用无阻尼 Kirchhoff 微板的固有频率表示的 Mindlin 矩形微板的复频率解析解,从而利用复频率法求得了反映热弹性阻尼水平的逆品质因子. 最后,通过数值结果定量地分析了剪切变形、材料以及几何参数对热弹性阻尼的影响 规律. 结果表明,Mindlin 板理论预测的热弹性阻尼小于 Kirchhoff 板理论预测的热弹性阻尼. 两种理论预测的热弹性阻尼之间的差值在临界厚度附近十分显著. 另外,随着微板的边/厚比增大,Mindlin 微板的热弹性阻尼最大值单调增大,而 Kirchhoff 微板的热弹性阻尼最大值却保持不变.      

Statics and dynamics of simply supported polygonal Reissner-Mindlin plates by analogy

Summary Free and forced vibrations of moderately thick, transversely isotropic plates loaded by lateral forces and hydrostatic (isotropic) in-plane forces are analyzed in the frequency domain. Influences of shear, rotatory inertia, transverse normal stress and of a two-parameter Pasternak foundation are taken into account. First-order shear-deformation theories of the Reissner–Mindlin type are considered. These theories are written in a unifying manner using tracers to account for the various influencing parameters. In the case of a general polygonal shape of the plate and hard-hinged support conditions, the Reissner-Mindlin deflections are shown to coincide with the results of the classical Kirchhoff theory of thin plates. The background Kirchhoff plate, which has effective (frequency-dependent) stiffness and mass, is loaded by effective lateral and in-plane forces and by imposed fictitious “thermal” curvatures. These deflections are further split into deflections of linear elastic prestressed membranes with effective stiffness, mass and load. This analogy for the deflections is confirmed by utilizing D'Alembert's dynamic principle in the formulation of Lagrange, which yields an integral equation. Furthermore, the analogy is extended in order to include shear forces and bending moments. It is shown that in the static case, with no in-plane prestress taken into account, the stress resultants for certain groups of Reissner-type shear-deformable plates are identical with those resulting from the Kirchhoff theory of the background. Finally, results taken from the literature for simply supported rectangular and polygonal Mindlin plates are yielded and verified by analogy in a quick and simple manner. Received 29 September 1998; accepted for publication 22 June 1999     

Static, stability and dynamic analysis of gradient elastic flexural Kirchhoff plates

The governing equation of motion of gradient elastic flexural Kirchhoff plates, including the effect of in-plane constant forces on bending, is explicitly derived. This is accomplished by appropriately combining the equations of flexural motion in terms of moments, shear and in-plane forces, the moment–stress relations and the stress–strain equations of a simple strain gradient elastic theory with just one constant (the internal length squared), in addition to the two classical elastic moduli. The resulting partial differential equation in terms of the lateral deflection of the plate is of the sixth order instead of the fourth, which is the case for the classical elastic case. Three boundary value problems dealing with static, stability and dynamic analysis of a rectangular simply supported all-around gradient elastic flexural plate are solved analytically. Non-classical boundary conditions, in additional to the classical ones, have to be utilized. An assessment of the effect of the gradient coefficient on the static or dynamic response of the plate, its buckling load and natural frequencies is also made by comparing the gradient type of solutions against the classical ones.     

A Bending-Gradient model for thick plates,Part II: Closed-form solutions for cylindrical bending of laminates

In the first part (Lebée and Sab, 2010a) of this two-part paper we have presented a new plate theory for out-of-plane loaded thick plates where the static unknowns are those of the Kirchhoff–Love theory (3 in-plane stresses and 3 bending moments), to which six components are added representing the gradient of the bending moment. The new theory, called Bending-Gradient plate theory is an extension to arbitrarily layered plates of the Reissner–Mindlin plate theory which appears as a special case when the plate is homogeneous. Moreover, we demonstrated that, in the general case, the Bending-Gradient model cannot be reduced to a Reissner–Mindlin model. In this paper, the Bending-Gradient theory is applied to laminated plates and its predictions are compared to those of Reissner–Mindlin theory and to full 3D (Pagano, 1969) exact solutions. The main conclusion is that the Bending-Gradient gives good predictions of deflection, shear stress distributions and in-plane displacement distributions in any material configuration. Moreover, under some symmetry conditions, the Bending-Gradient model coincides with the second-order approximation of the exact solution as the slenderness ratio L/h goes to infinity.     

箱形梁剪力滞效应分析中的翘曲位移函数及广义内力研究

以薄壁箱梁的弯曲计算理论为基础,从分析翼缘板的面内剪切变形和弯曲剪力流的分布规律入手,从理论上证明二次抛物线是箱形梁剪力滞效应分析中的合理翘曲位移函数。选取剪力滞效应引起的附加挠度作为广义位移,用基于最小势能原理的能量变分法建立箱形梁剪力滞效应分析的控制微分方程和边界条件。对箱梁横截面上新出现的广义内力给出严密定义,并建立了剪力滞翘曲应力的简便计算公式,它与初等梁弯曲应力公式具有相同的形式。对一个简支箱梁模型的计算表明,计算值与实测值吻合良好,从而证实了本文的分析方法和建立的公式是正确的。不同于弯矩的分布,剪力滞广义力矩具有快速衰减的分布特征。对集中荷载作用下的简支箱梁算例,剪力滞效应使其跨中挠度增大达12%,工程实践中必须认真对待。     

带旋转自由度C^0类任意四边形板（壳）单元

基于Ｒｅｉｓｓｎｅｒ－Ｍｉｎｄｉｌｉｎ板弯曲理论和Ｖｏｎ－Ｋａｒｍａｎ大挠度理论,采用单元域内和边界位移插值一致性的概念,将四节点等参弯曲单元与Ａｌｌｍａｎ膜变形二次插值模式相结合,对层合板壳的大挠度分析提供了一种实用的带旋转自由度的四节点Ｃ＾０类板单元。大量算例表明：该单元对板壳结构的线性强度、稳定性和后屈曲分析都表现出良好的收敛性和足够的工程精度。     

点支撑预应力中厚矩形板的弯曲

基于Reissner-Mindlin一阶剪切变形板理论，讨论在预加面内机械荷载或温度场作用下，点支撑中厚矩形板的弯曲问题。温度场假定沿板表面为均布，沿板厚方向为线性分布的。利用考虑剪切变形影响的Timoshenko梁函数，采用Rayleigh-Ritz法给出不同边界条件下点支撑中厚板在横向荷载作用下的挠度和弯矩分布。结果表明，均匀温度场与预加面内压力将使板的挠度和弯矩增加。支撑点位置的变化、边界约束条件和横向剪切变形效应都对板的内力大小和分布有显著影响。     

A Bending-Gradient model for thick plates. Part I: Theory

This is the first part of a two-part paper dedicated to a new plate theory for out-of-plane loaded thick plates where the static unknowns are those of the Kirchhoff–Love theory (3 in-plane stresses and 3 bending moments), to which six components are added representing the gradient of the bending moment. The new theory, called the Bending-Gradient plate theory is described in the present paper. It is an extension to arbitrarily layered plates of the Reissner–Mindlin plate theory which appears as a special case of the Bending-Gradient plate theory when the plate is homogeneous. However, we demonstrate also that, in the general case, the Bending-Gradient model cannot be reduced to a Reissner–Mindlin model. In part two (Lebée and Sab, 2011), the Bending-Gradient theory is applied to multilayered plates and its predictions are compared to those of the Reissner–Mindlin theory and to full 3D Pagano’s exact solutions. The main conclusion of the second part is that the Bending-Gradient gives good predictions of both deflection and shear stress distributions in any material configuration. Moreover, under some symmetry conditions, the Bending-Gradient model coincides with the second-order approximation of the exact solution as the slenderness ratio L/h goes to infinity.     

Large amplitude free flexural vibration of rings using finite element approach

Here, the large amplitude free flexural vibrations of isotropic/laminated orthotropic rings are investigated, using a shear flexible curved beam element based on field consistency principle. A laminated refined beam theory is introduced for developing the element, which satisfies the interface transverse shear stress and displacement continuity, and has a vanishing shear stress on the inner and outer surfaces of the beam. The formulation includes in-plane and rotary inertia effects, and the non-linearity due to the finite deformation of the ring. The governing equations obtained using Lagrange's equations of motion are solved through the direct integration technique. Amplitude-frequency relationships evaluated from the dynamic response history are examined. Detailed numerical results are presented considering various parameters such as radius-to-thickness ratio, circumferential wave number and ovality for isotropic and laminated orthotropic rings. The nature and degree of the participation of various modes in non-linear asymmetric vibration of oval ring brought out through the present study are useful for accurate modelling of the closed non-circular structures.     

A nonlinear composite shell theory

A general nonlinear theory for the dynamics of elastic anisotropic circular cylindrical shells undergoing small strains and moderate-rotation vibrations is presented. The theory fully accounts for extensionality and geometric nonlinearities by using local stress and strain measures and an exact coordinate transformation, which result in nonlinear curvatures and strain-displacement expressions that contain the von Karman strains as a special case. Moreover, the linear part of the theory contains, as special cases, most of the classical linear theories when appropriate stress resultants and couples are defined. Parabolic distributions of the transverse shear strains are accounted for by using a third-order theory and hence shear correction factors are not required. Five third-order nonlinear partial differential equations describing the extension, bending, and shear vibrations of shells are obtained using the principle of virtual work and an asymptotic analysis. These equations show that laminated shells display linear elastic and nonlinear geometric couplings among all motions.     

Nonobvious features of dynamics of circular cylindrical shells

In the framework of the nonlinear theory of flexible shallow shells, we study free bending vibrations of a thin-walled circular cylindrical shell hinged at the end faces. The finite-dimensional shell model assumes that the excitation of large-amplitude bending vibrations inevitably results in the appearance of radial vibrations of the shell. The modal equations are obtained by the Bubnov-Galerkin method. The periodic solutions are found by the Krylov-Bogolyubov method. We show that if the tangential boundary conditions are satisfied “in the mean,” then, for a shell of finite length, significant errors arise in determining its nonlinear dynamic characteristics. We prove that small initial irregularities split the bending frequency spectrum, the basic frequency being smaller than in the case of an ideal shell.     

Analysis of composite laminated plates

In the static and dynamic analysis of composite laminates, a theory for the laminated plates is presented in this paper. Because the deflection W_b which is caused by the classical bending deformation and the deflection W₅ which is caused by the shear deformation are divided from the total deflection W in the theory, this makes it easy to solve the governing equations. In addition, this theory is convenient for the discussion and analysis of the effects of transverse shear deformations on bendings, vibrations and stabilities of laminated plates.     

Closed form solutions for free vibrations of rectangular Mindlin plates

A new two-eigenfunctions theory, using the amplitude deflection and the generalized curvature as two fundamental eigenfunctions, is proposed for the free vibration solutions of a rectangular Mindlin plate. The three classical eigenvalue differential equations of a Mindlin plate are reformulated to arrive at two new eigenvalue differential equations for the proposed theory. The closed form eigensolutions, which are solved from the two differential equations by means of the method of separation of variables are identical with those via Kirchhoff plate theory for thin plate, and can be employed to predict frequencies for any combinations of simply supported and clamped edge conditions. The free edges can also be dealt with if the other pair of opposite edges are simply supported. Some of the solutions were not available before. The frequency parameters agree closely with the available ones through pb-2 Rayleigh-Ritz method for different aspect ratios and relative thickness of plate.     

Exact solutions for axisymmetric flexural free vibrations of inhomogeneous circular Mindlin plates with variable thickness

Circular plates with radially varying thickness, stiffness, and density are widely used for the structural optimization in engineering. The axisymmetric flexural free vibration of such plates, governed by coupled differential equations with variable coefficients by use of the Mindlin plate theory, is very difficult to be studied analytically.In this paper, a novel analytical method is proposed to reduce such governing equations for circular plates to a pair of uncoupled and easily solvable differential equations of the Sturm-Liouville type. There are two important parameters in the reduced equations.One describes the radial variations of the translational inertia and flexural rigidity with the consideration of the effect of Poisson's ratio. The other reflects the comprehensive effect of the rotatory inertia and shear deformation. The Heun-type equations, recently well-known in physics, are introduced here to solve the flexural free vibration of circular plates analytically, and two basic differential formulae for the local Heun-type functions are discovered for the first time, which will be of great value in enriching the theory of Heun-type differential equations.     

Flow-induced deformation of an elastic membrane adhering to a wall

The flow-induced deformation of a two-dimensional membrane with a circular unstressed shape clamped at the two ends on a plane wall at an arbitrary contact angle is considered. Working under the auspices of generalized shell theory, the membrane is allowed to develop in-plane tensions, transverse tensions, and bending moments determined by the curvature of the resting and deformed shapes. A system of ordinary differential equations governing the membrane shape is formulated, and the associated boundary-value problem is solved by numerical methods. Numerical results are presented to illustrate the deformation of a clamped membrane due to gravity or a negative transmural pressure. The shell formulation is coupled with a boundary-integral formulation for Stokes flow, and an efficient iterative scheme is developed to describe deformed equilibrium shapes of a membrane attached to a plane wall in the presence of an overpassing shear flow. Computations for different contact angles and shear rates reveal a wide variety of profiles and illustrate the distribution of the membrane tension developing due to the flow-induced deformation.     

Axisymmetric bending analysis of thick functionally graded circular plates using fourth-order shear deformation theory

In the present article, axisymmetric bending and stretching of functionally graded (FG) circular plates subjected to uniform transverse loading based on fourth-order shear deformation plate theory (FOST) have been studied. Using a fourth-order shear deformation theory, the solutions for deflection and rotation functions of FG plates are presented in terms of the corresponding quantities for a homogeneous plate using the classical plate theory (CPT), from which solutions one can easily obtain the FOST solutions for axisymmetric bending of FG circular plates. It is assumed that the effective mechanical properties of the functionally graded plates through the thickness are continuous functions of the volume fractions of the constituent parts which are themselves defined by a power-law function. Numerical results for maximum deflection and shear stress are presented for various percentages of ceramic–metal volume fractions. These results are also compared with those obtained from the first-order shear deformation plate theory of Mindlin (FST), the third-order shear deformation plate theory of Reddy (TST) as well as the exact three-dimensional elasticity solution. It is found that although the maximum deflections obtained using FOST and TST are close to each other, the through-thickness shear stress is predicted more accurately by the FOST formulation than by the TST.     

A NEW SPATIAL THIN-WALLED BEAM ELEMENT INCLUDING TRANSVERSE AND TORSIONAL SHEAR DEFORMATION

基于Timoshenko梁及Benscoter薄壁杆件理论,建立了考虑剪切变形、弯扭耦合以及翘曲剪应力影响的空间任意开闭口薄壁截面梁单元. 通过引入单元内部结点,对弯曲转角和翘曲角采用三节点Lagrange独立插值的方法,考虑了剪切变形和翘曲剪应力的影响并避免了横向剪切锁死问题;借助载荷作用下薄壁梁的截面运动分析,在位移和应变方程中考虑了弯扭耦合的影响. 通过数值算例将该单元的计算结果与理论解以及商用有限元软件和其他文献中的数值解进行对比和验证,结果对比表明该薄壁梁单元具有良好的精度和收敛性.     

A nonlinear composite plate theory

A general nonlinear theory for the dynamics of elastic anisotropic plates undergoing moderate-rotation vibrations is presented. The theory fully accounts for geometric nonlinearities (moderate rotations and displacements) by using local stress and strain measures and an exact coordinate transformation, which result in nonlinear curvatures and strain-displacement expressions that contain the von Karman strains as a special case. The theory accounts for transverse shear deformations by using a third-order theory and for extensionality and changes in the configuration due to in-plane and transverse deformations. Five third-order nonlinear partial-differential equations of motion describing the extension-extension-bending-shear-shear vibrations of plates are obtained by an asymptotic analysis, which reveals that laminated plates display linear elastic and nonlinear geometric couplings among all motions.     

面内变刚度薄板弯曲问题的挠度?弯矩耦合神经网络方法

发展了一种求解面内变刚度功能梯度薄板弯曲问题的神经网络方法. 面内变刚度薄板弯曲问题的偏微分控制方程为一复杂的4阶偏微分方程, 传统的基于强形式的神经网络解法在求解该偏微分方程时可能会遇到难以收敛、边界条件难以处理的情况. 本文基于Kirchhoff薄板弯曲理论, 提出了一种直角坐标系下任意面内变刚度薄板弯曲问题的神经网络解法. 神经网络模型包含挠度网络与弯矩网络, 分别用于预测薄板的挠度与弯矩, 从而将求解4阶偏微分方程转换为求解一系列二阶偏微分方程组, 通过对挠度、弯矩试函数的构造可使得神经网络计算结果严格满足边界条件. 在误差的反向传播中, 根据本文提出的误差函数公式计算训练误差并结合Adam优化算法更新模型的内部参数. 求解了不同边界条件、形状的面内变刚度薄板弯曲问题, 并将所得计算结果与理论解、有限元解进行对比. 研究表明, 本文模型对于求解面内变刚度薄板弯曲问题具备适应性, 虽然模型中的弯矩网络收敛较挠度网络要慢, 但本文方法在试函数的构造上更为简单、适应性更强.