Polymers containing anthraquinone units: Polycondensations 1,2,5,6-tetraaminoanthraquinone with some tetrachloroquinoxaline compounds

New ladder and partial ladder aromatic heteropolymers have been synthesized from 1,2,5,6-tetraaminoanthraquinone, 2,3,7,8-tetrachloro-1,4,6,9-tetraazaanthracene, 2,2′-3,3′-tetrachloro-6,6′-diquinoxaline, 2,2′,3,3′-tetracholoro-6,6′-diquinoxalyl ether and 2,2′,3,3′-tetrachloro-6,6′-diquinoxalyl sulfone. The polycondensations were carried out in solution and in melt. The inherent viscosities of polymers were in the range of 0.1-0.44. These polymers were highly colored, showed good thermal stability and were soluble in concentrated sulfuric acid and methanesulfonic acid. The structures of the polymers were established by comparison with model compounds.     

Polymers containing anthraquinone and quinoxaline units: Polypyrrolones

Four ladder or partial ladder polypyrrolones containing anthraquinone recurring units have been synthesized by condensing the dianhydride of 1,2,5,6-bis(α,β-dicarboxyl-pyrazino)anthraquinone with four different tetraamines, 1,2,4,5-tetraaminobenzene tetrahydrochloride, 3,3′,4,4′-tetraaminodiphenyl, 3,3′,4,4′-tetraaminodiphenyl ether, and 1,2,5,6-tetraaminoanthraquinone in dimethylacetamide and tetramethylene sulfone as reaction media. A prepolymer with an open structure was first formed which on further heating gave a closed-ring structure. These polymers which were highly colored, powdery materials, were insoluble in common organic solvents and slightly soluble only in concentrated H₂SO₄. They could, however, be solubilized in alkali by reduction with sodium dithionite. These polymers with an inherent viscosity in the range of 0.2–0.5, showed good thermal stability.     

Polymers with quinoxaline units. IV. Polymers with quinoxaline and oxazine units

Six ladder or partly ladder polymers have been prepared by the condensation of diaminodiphenols with tetrachloro- or terahydroxyquinoxaline derivatives with the use of poly (phosphoric acid), pyridine, and naphthalene as reaction media. The polymers thus obtained are highly colored powdery materials which are slightly soluble in concentrated sulfuric acid and methanesulfonic acid. These polymers show good thermal stability.     

Polymers with quinoxaline units. V. Polymers with quinoxaline and dioxin units

Ladder or partly ladder polymers have been prepared by condensation of tetraphenols with tetrachloroquinoxaline compounds in melt, or in pyridine, naphthalene, and nitrobenzene reaction media. The polymers are dark-colored, powdery materials with good thermal stability. Some of the samples are slightly soluble in sulfuric acid, while others are completely insoluble. No other solvents were found.     

Syntheses of three naturally occurring polybrominated 3,3′-bi-1H-indoles

The naturally occurring polybrominated indoles 2,2′,5,5′-tetrabromo-3,3′-bi-1H-indole, 2,2′,6,6′-tetrabromo-3,3′-bi-1H-indole, and 2,2′,5,5′,6,6′-hexabromo-3,3′-bi-1H-indole were synthesized using a palladium catalyzed, carbon monoxide mediated, double reductive N-heterocyclization of 2,3-bis(2-nitro-4(or 5)-bromophenyl)-1,4-butadienes as the key step.     

Self-assembly of chiral hydrogen-bonded grid layers from terephthalic Siamese twins

2,2′,5,5′-Tetracarboxy- and 2,2′,5,5′-tetracarbamoyl-substituted biphenyls and also the 2,2′,3,3′,6,6′-hexacarboxy-substituted analogue behave as Siamese twins of terephthalic tectons in the single crystal self-assembly, giving rise to chiral 2D grid layers. A comparison has been made with the corresponding 2,2′,6,6′-tetrasubstituted biphenyls which mimic isophthalic twins in their self-assembly.     

Intrinsically microporous polyimides containing spirobisindane and phenazine units: Synthesis,characterization and gas permeation properties

A new diamine containing spirobisindane and phenazine units, namely, 3,3,3′,3′‐tetramethyl‐2,2′,3,3′‐tetrahydro‐1,1′‐spirobi[cyclopenta[b]phenazine]‐7,7′‐diamine (TTSBIDA) was synthesized starting from commercially available 5,5′,6,6′‐tetrahydroxy‐3,3,3′,3′‐tetramethyl‐1,1′‐spirobisindane (TTSBI). TTSBI was oxidized to 3,3,3′,3′‐tetramethyl‐2,2′,3,3′‐tetrahydro‐1,1′‐spirobi[indene]‐5,5′,6,6′‐tetraone (TTSBIQ) which was subsequently condensed with 4‐nitro‐1,2‐phenylenediamine to obtain 3,3,3′,3′‐tetramethyl‐7,7′‐dinitro‐2,2′,3,3′‐tetrahydro‐1,1′‐spirobi[cyclopenta[b]phenazine] (TTSBIDN). TTSBIDN was converted into TTSBIDA by reduction of the nitro groups using hydrazine hydrate in the presence of Pd/C as the catalyst. A series of new polyimides of intrinsic microporosity (PIM‐PIs) were synthesized by polycondensation of TTSBIDA with commercially available aromatic dianhydrides. PIM‐PIs exhibited amorphous nature, high thermal stability (T₁₀ > 480 °C) and intrinsic microporosity (BET surface area = 59–289 m²/g). The gas permeation characteristics of films of selected PIM‐PIs were evaluated and they exhibited appreciable gas permeability as well as high selectivity. The CO₂ and O₂ permeability of PIM‐PIs were in the range 185.4–39.2 and 30.6–6.2 Barrer, respectively. Notably, polyimide derived from TTSBIDA and 4,4′‐(hexafluoroisopropylidene)diphthalic anhydride (PIM‐PI‐6FDA) exhibited high CO₂ and O₂ permeability of 185.4 and 30.6 Barrer with CO₂/CH₄ and O₂/N₂ selectivity of 43.1 and 5.1, respectively. The data of PIM‐PI‐6FDA for CO₂/CH₄ and O₂/N₂ gas pairs were located near Robeson upper bound. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 766–775     

Rigid-ladder polymers: Polymers containing anthraquinone recurring units

In an attempt to synthesize some processable ladder or partial ladder polymers containing anthraquinone recurring units, leucoquinalizarin was treated with 3,3′-diaminobenzidine. This polymer, which was a black powdery material, was slightly soluble in concentrated sulfuric acid and dimethylsulfoxide. Also, 1,5-diamino-2,6-dimercaptoanthraquinone was condensed with 2,5-dichloro-p-benzoquinone in pyridine to give a black powdery polymer. This was only partially soluble in concentrated sulfuric acid, but could be solubilized in alkali by reduction with sodium dithionite.     

Synthesis of Novel Monodentate Phosphoramidites and Their Application in Iridium‐Catalyzed Asymmetric Hydrogenations

New monodentate H₈‐binaphthol based phosphoramidites 6 b–i have been prepared. Starting from (S)‐3,3′‐dibromo‐5,5′,6,6′,7,7′,8,8′‐octahydro‐1,1′‐binaphthyl‐2,2′‐diol 3 , a general protocol for the synthesis of ligands 6 is presented. A small ligand library bearing aryl substituents in the 3,3′‐position of the binaphthol core was synthesized and successfully tested in the iridium‐catalyzed asymmetric hydrogenation of 2‐amidocinnamates to obtain different α‐amino acid derivatives in up to 99 % ee.     

Model compounds and polymers with quinoxaline units

Tetra- and heptanuclear N-heterocycles, their dimers and their polymers have been prepared by condensation of o-phenylenediamine or 3,3'-diaminobenzidine with 2,3-dihydroxyquinoxaline, 2,3,2,3'-tetrahydroxy-6,6'-bisquinoxaline, or 2,3,7,8-tetrahydroxy-1,4,6,9-tetraazaanthracene in polyphosphoric acid, or with the O-phenyl derivatives of the latter three compounds in phenol. The condensation products are highly colored compounds with characteristic absorption spectra. The polymers show good thermal stability.     

Polymers with quinoxaline units. II

A double chain or ladder polymer was obtained by the condensation of 1,2,4,5-tetraaminobenzene with 2,3,7,8-tetrasubstituted-1,4,6,9-tetraazaanthracene and self-condensation of 2,3-dihydroxy-6,7-diaminoquinoxaline and of 2,3-diphenoxy-6,7-diaminoquinoxaline. The polycondensations were carried out in solution or in melt. The polymers thus obtained were highly colored products which had inherent viscosities up to 2.5. The structures of the polymers were established by comparison with model compounds.     

Synthesis of Per- and Poly-Substituted Trehalose Derivatives: Studies of Properties Relevant to Their Use as Excipients for Controlled Drug Release

Per- and poly-substituted oligosaccharide derivatives, with trehalose cores, have been prepared and assessed for their potential for use as excipients in controlled-release formulations. The synthesized compounds, generally with acyl and amido substituents, included 6,6′-N,N′ -diamido-6,6′ -dideoxy-α,α -trehalose derivatives, 6,6′ -bis(1,2,3,4-tetra-O-acetyl-β -D-glucopyranuronyl)-α, α -trehalose derivatives, 2,2′,3,3′ -tetra-O-acetyl-6,6′ -bis-(1,2,3,4-tetra-O-acetyl-β-D-glucopyranuronyl)-4,4′ -di-O-acyl-α,α-trehalose, 2, 2′, 3, 3′ -tetra-O-acetyl-6-(1,2,3,4-tetra-O-acetyl-β-D-glucopyranuronyl)-4,4′,6′ -tri-O-acyl-α,α-trehalose, and 2,2′,3,3′,4,4′ -hexa-O-acetyl-6,6′ -bis-(1,2,3,4-tetra-O-acetyl-6-O-succinyl-β-D-glucopyranuronyl)-α,α-trehalose. Compounds were characterized by NMR, IR, MS and optical rotations; elemental analyses; or HRMS. The compounds formed amorphous materials either on fast quenching of melts or on spray drying. Properties, used in the initial assessment of the potential as controlled-release excipients, were log₁₀ P and glass transition, T_g, values.     

Self-condensation reaction of aromatic tetraamines in polyphosphoric acid

Ladder and partial ladder polymers have been obtained by self-condensation reactions of 1,2,4,5-tetraaminobenzene, 3,3′,4,4′-tetraaminodiphenyl ether, 3,3′-diaminobenzidine and 3,3′,4,4′-tetraaminodiphenyl sulfone in polyphosphoric acid. The products thus obtained are highly colored compounds with good thermal stability. They seem to be made up of polyquinoxaline or dihydrophenazine or a mixture of these two recurring units. They are slightly soluble in methanesulfonic acid and concentrated sulfuric acid and have inherent viscosities in the 0.2 to 0.4 range.     

2,2′,6,6′-Tetrachloro-4,4′-propane-2,2-diyldiphenol, 2,2′,6-tribromo-4,4′-propane-2,2-diyldiphenol and 2,2′,6,6′-tetrabromo-4,4′-propane-2,2-diyldiphenol

Three flame retardants with very similar molecular structures showing three different packing patterns have been studied. The crystal structure of 2,2′,6,6′-tetrachloro-4,4′-propane-2,2-diyldiphenol, C₁₅H₁₂Cl₄O₂, can be described as a packing of sheets. The packing shows a very short intermolecular Cl⋯Cl contact distance of 3.094 (2) Å between pairs of mol­ecules inside each sheet. The crystal structure of 2,2′,6-tribromo-4,4′-propane-2,2-diyldiphenol, C₁₅H₁₃Br₃O₂, can be described as a packing of doubly stranded helical square tubes. These square helices are interconnected through Br⋯Br contacts between different helices. Finally, a previously known structure, 2,2′,6,6′-tetrabromo-4,4′-propane-2,2-diyldiphenol [Simonov, Cheban, Rotaru & Bels'skii (1986). Kristallografiya, 31 , 397–399], C₁₅H₁₂Br₄O₂, which is the most commonly used flame retardant and which has twofold rotational symmetry, has been refined in the correct absolute configuration. The structure shows large differences from the chloro analogue with regard to packing, van der Waals distances and hydrogen-bond distances.     

Preparation and spectral properties of Zn(II) complexes with aryl-substituted dipyrrolylmethene and azadipyrrolylmethene

The homoleptic complexes of Zn(II) with 3,3′,5,5‘-tetraphenyl-2,2’-dipyrrolylmethene and 3,3′,5,5′-tetraphenyl-ms-aza-2,2′-dipyrrolylmethene [ZnL₂] have been prepared, and their spectral and luminescent properties have been studied. The complex with 3,3′,5,5′-tetraphenyl-2,2′-dipyrrolylmethene exhibited an intense fluorescence in the nonpolar medium, efficiently quenched in the polar solvents; thus, it can be used as a fluorescent sensor of the medium polarity.     

Synthesis and characterization of fluoropolymers by the polyaddition of bis(epoxide)s with dicarboxylic acids and diols

The synthesis and characterization of the fluoropolymers poly 1a – 1d and poly 2a – 2d with pendant hydroxyl groups were examined. The polyaddition of bis(epoxide)s [2,2′‐bis(4‐glycidyletherphenyl)hexafluoropropane and bisphenol A diglycidyl ether] with dicarboxylic acids (tetrafluoroterephthalic acid and terephthalic acid) and diols [2,2′‐bis(4‐hydroxyphenyl)hexafluoropropane, 2,2′,3,3′,5,5′,6,6′‐octafluoro‐4,4′‐biphenol, 1,4‐bis(hexafluorohydroxyisopropyl)benzene, and 1,3‐bis(hexafluorohydroxyisopropyl)benzene] was carried out at 50–100 °C for 6–48 h in the presence of quaternary onium salts (tetrabutylammonium bromide, tetrabutylammonium chloride, tetrabutylphosphonium bromide, and tetrabutylphosphonium chloride; 2.5 mol %) as catalysts in dimethyl sulfoxide, N‐methylpyrrolidone, dimethylformamide, dimethylacetamide, dioxane, diglyme, o‐dichlorobenzene, chlorobenzene, and toluene to afford the corresponding polymers, poly 1a – 1d and poly 2a – 2d , with number‐average molecular weights of 11,000–59,400 in 45–97% yields. The solubility of the obtained polymers was good, and their thermal stability might be assumed from their structures. A linear relationship was observed between the contents of the fluorine atoms and the refractive indices. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1395–1404, 2002     

Interpenetrating Coordination Polymers from CuI or AgI and Flexible Ligands: 2D Polyrotaxanes and Interpenetrating Grids

The reaction of [Cu(CH₃CN)₄]NO₃ or AgNO₃ with flexible ligands 1,4‐bis(4‐pyridylmethyl)‐2,3,5,6‐tetrafluorobenzene (bpf) or 4,4′‐bis(4‐pyridylmethyl)‐2,2′,3,3′,5,5′,6,6′‐octafluorobiphenyl (bpfb) afforded two types of interpenetrating coordination polymers. The structures of [Cu₂(bpf)₃(NO₃)₂]_n and [Ag₂(bpf)₃‐(NO₃)₂]_n are 2D polyrotaxane networks in which 1D polymeric chains are aligned in a grid. The structure of {[Cu(bpfb)₂]NO₃}_n is a 2D grid polymer with two‐fold parallel interpenetration.     

Porous Coordination Polymers of Diverse Topologies Based on a Twisted Tetrapyridylbiaryl: Application as Nucleophilic Catalysts for Acetylation of Phenols

Porous coordination polymers (CPs) with partially uncoordinated pyridyl rings based on rationally designed polypyridyl linkers are appealing from the point of view of their application as nucleophilic catalysts. A D_2d‐symmetric tetradentate organic linker L , that is, 2,2′,6,6′‐tetramethoxy‐3,3′,5,5′‐tetrakis(4‐pyridyl)biphenyl, was designed and synthesized for metal‐assisted self‐assembly aimed at porous CPs. Depending on the nature of the metal ion and the counter anion, the ligand L is found to function as a 3‐ or 4‐connecting building block leading to porous CPs of diverse topologies. The reaction of L with Zn(NO₃)₂ and Cd(NO₃)₂ yields porous 2 D CPs of “ fes ” topology, in which the tetrapyridyl linker L serves as a 3‐connecting unit with its free pyridyl rings well exposed into the pores. The functional utility of these porous CPs containing uncoordinated pyridyl rings is demonstrated by employing them as efficient heterogeneous nucleophilic catalysts for acetylation of a number of phenols with varying electronic properties and reactivities.     

Investigation of reactions of the organozinc reagents prepared from zinc and dialkyl dibromomalonates with the derivatives of 2-arylmethyleneindan-1,3-dione and 5-arylmethylene-2,2-dimethyl-1,3-dioxane-4,6-dione

Organozinc compounds prepared from dialkyl dibromomalonates and zinc react with 2-arylmethyl-eneindan-4,6-diones, 5-arylmethylene-2,2-dimethyl-1,3-dioxane-4,6-diones, as well as with 2-[4-(1,3-dioxoindan-2-ylidenemethyl)phenyl]methyleneindan-1,3-dione and 5-[4-(2,2-dimethyl-4,6-dioxo-1,3-dioxane-2-ylidenemethyl)phenyl]methylene-2,2-dimethyl-1,3-dioxane-4,6-diones to form dialkyl 3-aryl-1′3′-dioxaspiro(cyclopropane-2,2′-indan)-1,1-dicarboxylates, dimethyl 3-aryl-6,6-dimethyl-5,7-dioxa-4,8-dioxaspiro[2,5]octan-2,2-dicarboxylates, dialkyl 2-{4-[3,3-bis (alkoxycarbonyl)-1′,3′-dioxaspiro(cyclopropane-2,2′-indan)-1-yl]phenyl}-1′,3′-dioxaspiro[cyclopropane-2,2′-indan]-1,1-dicarboxylates, and dialkyl 2-{4-[2,2-bis(alkoxycarbonyl)-6,6′-dimethyl-4,8-dioxo-5,7-dioxaspiro[2,5]oct-1-yl]phenyl}-6,6-dimethyl-4,8-dioxo-5,7-dioxaspiro[2,5]octan-1,1-dicarboxylate respectively.     

A New Diphenyl Ether from Aquilaria sinensis

Chemistry of Natural Compounds - A new diphenyl ether, 3,3′-dihydroxy-2,2′,4,4′-tetramethoxy-6,6′-dimethyldiphenyl ether (1) was isolated from the woods of Aquilaria...