Kinetic studies on the hydrosilylation of phenylacetylene with R3SiH (R3 = PhMe2, Ph2Me,Ph3, Et3) using bis(1,2‐diphenylphosphinoethane)norbornadiene rhodium(I) hexafluorophosphate as catalyst

Product distribution and kinetic studies on the hydrosilylation of phenylacetylene by Ph₃SiH, Ph₂MeSiH, PhMe₂SiH and Et₃SiH were performed using bis‐[1,2‐diphenylphosphinoethane]norbornadienerhodium(I) hexafluorophosphate, 1, as catalyst. Pre‐equilibration of the catalyst with the acetylene produced hydrosilylations, pre‐equilibration with the silane did not. The catalyst showed a pronounced selectivity for cis‐addition to form β‐products, t‐PhCH­CHSiR₃, unlike most hydrosilylation catalysts. The kinetic studies showed a hydrosilylation reaction that is zero order with respect to both acetylene and the silane, with a dependency upon catalyst concentration. The k_obs value is directly influenced by the substituents on the silane: k(PhMe₂SiH) > k (Et₃SiH > k (Ph₂MeSiH) > k (Ph₃SiH). Intercalation of the catalyst in hectorite was not useful, since either no reaction occurred in non‐polar solvents, or extraction of the catalyst occurred in polar solvents to produce the same product distributions. Copyright © 2000 John Wiley & Sons, Ltd.     

Transesterification of phenyl salicylate II. Kinetics and mechanism of intramolecular general base-catalyzed cleavage of phenyl salicylate under the presence of 1,2-ethanediol and 2-ethoxyethanol

The first-order rate constants, k₁, for 1,2-ethanediolysis (within the content of 1,2-ethanediol of 5% to 90%, v/v) and 2-ethoxyethanolysis (within the 2-ethoxyethanol content of 5% to 60%, v/v) of phenyl salicylate, PSH, in alkaline aqueous mixed solvents, fit to a relationship: k₁ = k[ROH]_T/(1 + K[ROH]_T) where k and K represent the secondorder rate constant for the reaction of alkanol, ROH, with ionized phenyl salicylate, PS^?, and association constant for the dimerization of ROH, respectively, and [ROH]_T is the total concentration of ROH. Similar relationship between k₁ and [ROH]_T has been found for 1,2-ethanediolysis of PS^? studied in mixed solvents containing 1,2-ethanediol and MeCN. In the alkaline aqueous mixed solvents containing 2-ethoxyethanol, the k₁-[ROH]_T profile reveals the change in the solvent structure of the reaction medium at >60% (v/v) of ROH content. It is proposed that alkanols exist in polymeric form, (ROH)_n, and the alkanolysis of PS^? involves the pre-equilibrium formation of monomeric ROH from (ROH)_n, followed by an intramolecular general base-catalyzed nucleophilic attack at carbonyl carbon of ester. A slight negative KCl salt- and slight positive n-Bu₄NI salt-effect are obtained for 1,2-ethanediolysis while a significant positive n-Bu₄NI salt-effect is obtained for 2-ethoxyethanolysis of PS^?.     

Kinetics of 1,3‐dipolar cycloaddition reaction between C,N‐diphenylnitrone and dimethyl fumarate in various solvents and aqueous solutions

Second‐order rate constants and activation parameters of 1,3‐dipolar cycloaddition reaction between C,N‐diphenylnitrone and dimethyl fumarate were obtained in various solvents and aqueous solutions at 65°C. Second‐order rate constants of the reaction in water and ethylene glycol are approximately 33 and 8 times faster than those expected from solvent polarity, respectively. Increase of the reaction rate in aqueous solutions of ethanol is higher than that of propan‐1‐ol. A multiparameter correlation of log k₂ vs Sp and E_T^N in various solvents and aqueous solutions of ethanol shows that solvophobicity and solvent polarity parameter are important factors in occurrence of the reaction. © 2000 John Wiley & Sons, Inc. Int J Chem Kinet 32: 431–434, 2000     

Solvent effect on the radical polymerization of di-n-butyl itaconate

Solvent effect on the polymerization of di-n-butyl itaconate (DBI) with dimethyl azobisisobutyrate (MAIB) was investigated at 50 and 61°C. The solvents used were found to affect significantly the polymerization. The polymerization rate (R_p) and the molecular weight of the resulting polymer are lower in more polar solvents. The initiation rate (R_i) by MAIB, however, shows a trend of being rather higher in polar solvents. The stationary state concentration of propagating poly(DBI) radical was determined by ESR in seven solvents. The rate constants of propagation (k_p) and termination (k_t) were evaluated by using R_p, R_i, and the polymer radical concentration observed. The k_p value decreases fairly with increasing polarity of the solvent used, whereas k_t is not so influenced by the solvents. The solvent effect on k_p is explained in terms of a difference in the environment around the terminal radical center of the growing chain. Copolymerization of DBI with styrene (St) was also examined in three solvents with different physical properties. The poly(DBI) radical shows a lower reactivity toward St in a more polar solvent.     

Ionic Liquids - New Solvents in the Free Radical Polymerization

Summary: The analysis of the influence of ionic liquids (ILs) in polymer synthesis as an alternative for common organic solvents is still an active field of research. 1 Using ILs as solvents for free radical polymerizations implies a significant increase in polymerization rates and molecular weights which can be observed. In this work we examined the copolymerization behaviour of styrene (S) and methyl methacrylate (MMA), glycidyl methacrylate (GMA) and 2-hydroxypropyl methacrylate (HPMA) with acrylonitrile (AN) in 1-etyhl-3-methylimidazolium ethylsulfate ([EMIM]EtSO₄). ILs are liquids with comparable high polarities and viscosities. These two characteristic properties are strongly correlated with the rate coefficients of propagation k_p and termination k_t. 2 - 4 The rate constant of termination k_t decreases when the IL concentration and therefore the viscosity of the reaction mixture is increased, whereas the propagation rate coefficient k_p increases with increasing IL content. The viscosity of the IL can be varied by either working with mixtures of IL with conventional organic solvents – here the IL [EMIM]EtSO₄ was mixed with DMF – or by variation of the temperature. The influence of the viscosity of the IL ([EMIM]EtSO₄) on polymerization kinetics of methyl methacrylate (MMA) and styrene/acrylonitrile (S/AN) was investigated.     

Solvent effects in the reaction of 2-thiophenesulfonyl chloride with aniline

The second order rate constants k₂ and the activation parameters for the reaction of 2-thiophenesulfonyl chloride with aniline together with solution enthalpies of the reactants have been measured in methanol, ethanol, 2-propanol, acetonitrile and acetone. The reaction rates are slower in dipolar aprotic solvents than in protic ones due to a remarkable activation negative entropy. The rate constants k₂ are correlated with empirical solvent polarity parameters. The data seem in accord with a S_AN reaction mechanism.     

Scaling and structural properties of a polymer in a simple solvent: A study based on integral equations

We present a statistical mechanical theory for polymer–solvent systems based on integral equations derived from the polymer Kirkwood hierarchy. Integral equations for pair monomer–monomer, monomer–solvent, and solvent–solvent correlation functions yield polymer–solvent distribution, chain conformation in three dimensions, and scaling properties associated with polymer swell and collapse in athermal, good, and poor solvents. Variation of polymer properties with solvent density and solvent quality is evaluated for chains having up to 100 bonds. In good solvents, the scaling exponent v has a constant value of about 0.61 at different solvent densities computed. For the athermal solvent case, the gyration radius and scaling exponent decrease with solvent density. In a poor solvent, the chain size scales as N^v with the value of the exponent being about 0.3, compared with the mean field value of ⅓. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 3025–3033, 1998     

Reaction of chlorine dioxide with phenol

The kinetics of phenol oxidation with chlorine dioxide in different solvents (2-methylpropan-1-ol, ethanol, 1,4-dioxane, acetone, acetonitrile, ethyl acetate, dichloromethane, heptane, tetrachloromethane, water) was studied by spectrophotometry. In all solvents indicated, the reaction rate is described by an equation of the second order w = k[PhOH]·[ClO₂]. The rate constants were measured (at 10—60 °C), and the activation parameters of oxidation were determined. The reaction rate constant depends on the solvent nature. The oxidation products are a mixture of p-benzoquinone, 2-chloro-p-benzoquinone, and diphenoquinone.     

A new method for the determination of the rate constants for the disproportionation of semiquinone radicals from nonstationary kinetics of Chain reactions between quinoneimines and hydroquinones

A new method is suggested for the determination of the rate constants for the disproportionation of semiquinone radicals k ₆ from the kinetics of chain reactions between quinoneimines and hydroquinones under nonstationary conditions. The k ₆ values were determined in solvents of various natures, including comparatively low-polarity solvents in which hydroquinones are poorly soluble. The k ₆ values were found from the dependence of the degree of quinoneimine concentration lowering during a certain time (∼20 s) after reaction beginning (when the reaction occurred under nonstationary conditions) on the rate of initiation. Techniques for overcoming difficulties caused by the absence of the limiting chain propagation stage in reactions between quinoneimines and hydroquinones were suggested. The developed method of the nonstationary kinetics of chain reactions was applied to selectively determine the rate constant for the disproportionation of 2,5-dichloroseniquinone radicals, which is one of parallel chain termination stages in the chain reaction between N,N’-diphenyl-1,4-benzoquinonediimine and 2,5-dichlorohydroquinone, k ₆ = (5.8−7.1) × 10⁶ l/(mol s) in chlorobenzene at 298 K.     

Kinetics and Mechanism of Monomolecular Heterolysis of Commercial Organohalogen Compounds: XXXIV. Solvent Effect on the Heterolysis Rate of 1-Chloro-1-methylcyclohexane. Correlation Analysis of Solvation Effects in Heterolysis of 1-Chloro-1-methylcyclohexane and 1-Chloro-1-methylcyclopentane

The kinetics of heterolysis of 1-chloro-1-methylcyclohexane in 9 protic and 25 aprotic solvents at 25°C were studied by the verdazyl method. The kinetic equation is v = k[RCl] (E1 mechanism). The heterolysis rate of 1-chloro-1-methylcyclohexane in protic solvents is two orders of magnitude lower than that of 1-chloro-1-methylcyclopentane, whereas in low-polarity and nonpolar aprotic solvents the rates are close. A correlation analysis was made to reveal the solvation effects in heterolysis of both chlorides in a set of 9 protic and 25 aprotic solvents, and separately in protic and aprotic solvents.     

Photophysical Properties of Coumarin‐30 Dye in Aprotic and Protic Solvents of Varying Polarities¶

Experimental results on various photophysical properties of coumarin‐30 (C30) dye, namely, Stokes' shift (Δv), fluorescence quantum yield (τ_f), fluorescence lifetime (τ_f), radiative rate constant (k_f) and nonradiative rate constant (k_nr), as obtained using absorption and fluorescence measurements have been reported. Though in most of the solvents the properties of C30 show more or less linear correlation with the solvent polarity function, Δf= [(ε ‐ 1)/(2ε+ 1) ‐ (n² ‐ 1)/ (2n²+ l)], they show unusual deviations in nonpolar solvents at one end and in high‐polarity protic solvents at the other end. From the solvent polarity and temperature effect on the photophysical properties of the dye, following inferences have been drawn: ( 1 ) in nonpolar solvents, the dye exists in a nonpolar structure, where its 7‐NEt₂ substituent adopts a pyramidal configuration and the amino lone pair is out of resonance with the benzopyrone π cloud; ( 2 ) in medium to higher polarity solvents, the dye exists in a polar intra‐molecular charge transfer structure, where the 7‐NEt₂ group and the 1,2‐benzopyrone moiety are in the same plane and the amino lone pair is in resonance with the benzopyrone π cloud; ( 3 ) in protic solvents, the dye‐solvent intermolecular hydrogen bonding influences the photophysical properties of the dye; and ( 4 ) in high‐polarity protic solvents, the excited C30 undergoes a new activation‐controlled nonradiative deexcitation process because of the involvement of a twisted intra‐molecular charge transfer (TICT) state. Contrary to most other TICT molecules, the activation barrier for this deexcitation process in C30 is observed to increase with solvent polarity. A rational for this unusual behavior has been given on the basis of the solvent polarity‐dependent stabilization and crossing of relevant electronic states and the relative propensity of interconversion among these states.     

Oxidation of Antitubercular Drug Isoniazid by a Lipopathic Oxidant,Cetyltrimethylammonium Dichromate: A Mechanistic Study

The oxidation of an antitubercular drug isoniazid by a lipopathic oxidant cetyltrimethylammonium dichromate (CTADC) in a nonpolar medium generates isonicotinic acid both in the presence and the absence of acetic acid. The conventional UV–vis spectrophotometric method is used to study the reaction kinetics. The occurrence of the Michaelis–Menten–type kinetics with respect to isoniazid confirms the binding of oxidant and substrate to form a complex before the rate‐determining step. The existence of the inverse solvent kinetic isotope effect, k(H₂O)/ k(D₂O) = 0.7, in an acid‐catalyzed reaction proposes a multistep reaction mechanism. A decrease in the rate constant with an increase in [CTADC] reveals the formation of reverse micellar–type aggregates of CTADC in nonpolar solvents. In the presence of different ionic and nonionic surfactants, CTADC forms mixed aggregates and controls the reaction due to the charge on the interface and also due to partition of oxidant and substrate in two different domains. High negative entropy of activation (ΔS^? = –145 and –159 J K^?1 mol^?1 in the absence and presence of acetic acid) proposes a more ordered and highly solvated transition state than the reactants. Furthermore, the solvent polarity‐reactivity relationship reveals (i) the presence of less polar and less ionic transition state compared to the reactants during the oxidation, (ii) differential contribution from nonpolar and dipolar aprotic solvents toward the reaction process, and (iii) the existence of polarity/hydrophobic switch at log P = 0.73. A suitable mechanism has been proposed on the basis of experimental results. These results may provide insight into the mechanism of isoniazid oxidation in hydrophobic environment and may assist in understanding the drug resistance in different location.     

Generalized correlations for molecular weight and concentration dependence of zero-shear viscosity of high polymer solutions

Data are presented to show that two correlations of viscosity–concentration data are useful representations for data over wide ranges of molecular weight and up to at least moderately high concentrations for both good and fair solvents. Low molecular weight polymer solutions (below the critical entanglement molecular weight M_c) generally have higher viscosities than predicted by the correlations. One correlation is η_sp/c[η] versus k′[η], where η_sp is specific viscosity, c is polymer concentration, [η] is intrinsic viscosity, and k′ is the Huggins constant. A standard curve for good solvent systems has been defined up to k′[η]c ≈? 3. It can also be used for fair solvents up to k′[η]c ≈? 1.25· low estimates are obtained at higher values. A simpler and more useful correlation is η_R versus c[η], where η_R is relative viscosity. Fair solvent viscosities can be predicted from the good solvent curve up to c[η] ≈? 3, above which estimates are low. Poor solvent data can also be correlated as η_R versus c[η] for molecular weights below 1 to 2 × 10⁵.     

Influence of a reaction medium on the oxidation of aromatic nitrogen-containing compounds by peroxyacids

The influence of different solvents on the oxidation reaction rate of pyridine (Py), quinoline (QN), acridine (AN), α-oxyquinoline (OQN) and α-picolinic acid (APA) by peroxydecanoic acid (PDA) was studied. It was found that the oxidation rate grows in the series Py < QN < AN, and the rate of the oxidation reaction of compounds containing a substituent in the α position from a reactive center is significantly lower than for unsubstituted analogues. The effective energies of activation of the oxidation reaction were found. It was shown that in the first stage, the reaction mechanism includes the rapid formation of an intermediate complex nitrogen-containing compound, peroxyacid, which forms products upon decomposing in the second stage. A kinetic equation that describes the studied process is offered. The constants of equilibrium of the intermediate complex formation (K _eq) and its decomposition constant (k ₂) in acetone and benzene were calculated. It was shown that the nature of the solvent influences the numerical values of both K _p and k ₂. It was established that introduction of acetic acid (which is able to form compounds with Py) into the reaction medium slows the rate of the oxidation process drastically. Correlation equations linking the polarity, polarizability, electrophilicity, and basicity of solvents with the constant of the PDA oxidation reaction rate for Py were found. It was concluded that the basicity and polarity of the solvent have a decisive influence on the oxidation reaction rate, while the polarizability and electrophilicity of the reaction medium do not influence the oxidation reaction rate.     

Huggins constant k′ for flexible chain polymers

The Huggins constant k′ in the expression for the viscosity of dilute nonelectrolytic polymer solutions, η = η(1 + [η] c + k′[η]²c² + …), is calculated. For polymers in the theta condition, k′ is estimated to be 0.5 < k_θ′ ≤ 0.7. For good solvent systems, the Peterson-Fixman theory of k′ has been modified; the equilibrium radial distribution function in the original theory is replaced with a parametric distribution for interpenetrating macromolecules in the shear force field. Comparison of the modified theory with experimental k′ for polystyrenes and poly(methyl methacrylates) of different molecular weights in various solvents shows good agreement. An empirical equation which correlates the Huggins constant k′ and the viscosity expansion factor α_η for polymers has been found to coincide well with the modified theory.     

The Copolymerization of Alkenes with Maleic Anhydride

The investigations presented deal with the experimental results of the copolymerization of maleic anhydride (MAn) with alkenes. The course of the reaction is explained by the overall rate of the copolymerization (v _Br), which correlates with the solution viscosity of the copolymer, and the dependence of the v _Br maximum on the mole ratio of the monomers at constant total monomer concentration. The use of solvents with increasing donor power leads to increased complexing of the free MAn molecules and of the MAn radical chain ends. The results demonstrate that, for low 1-alkenes, the addition of the MAn chain radical is the rate-determining step of the copolymerization. As the substituents on the olefinic double bond become larger or the double bond shifts to the 1,2-position, the addition of MAn to the hydrocarbon radical becomes more and more the rate-determining step. On the other hand, an increase of the CT complexation of the MAn polymer radical by use of donor solvents decreases the alkene addition rate.     

Catalysis of benzisoxazole isomerization by molecularly imprinted polymers

A tailor-made catalytically active polymer catalyzing the benzisoxazole isomerization is described. Kinetic studies carried out in water/ethanol (3:1, v/v) at room temperature, showed a rate acceleration (k_MIP/k_control) of 7.2-fold compared to the control polymer. The imprinted polymer exhibits Michaelis-Menten kinetics with a K_m of 0.484 mM and a k_cat of 0.205 min⁻¹. Compared with the uncatalyzed reaction, a rate enhancement ((k_cat/K_m)/k_uncat) of 4 × 10⁴ fold was obtained. Substrate selectivity, accessible binding site analysis, dissociation constant determination, and inhibition study were also performed.     

Kinetics and mechanism of transesterification of phenyl salicylate

The first-order rate constants, k₁, obtained for methanolysis and ethanolysis of phenyl salicylate (PSH) in aqueous mixed solvents, fit to a relationship: k₁ = A₁ · [ROH]_T/(1 + A₂[ROH]_T) where A₁ and A₂ are the unknown parameters and [ROH]_T is the total concentration of alkanol. It is proposed that the alkanolysis of PSH involves the preequilibrium formation of monomeric ROH from polymeric (ROH)_n, followed by an intramolecular general base-catalysed nucleophilic attack by monomeric ROH on the carbonyl carbon of the ester. In the mixed solvents containing alkanol and MeCN, the k₁ – [ROH]_T profiles obtained in the presence of K⁺ ions are different from those obtained in the presence of Na⁺ ions which could be attributed to the cation-induced changes in the alkanol structure. Negative KCl salt effect has been observed on methanolysis of PSH, while it is essentially unaffected by the presence of tetraalkylammonium iodide salts (R₄NI). The rates of ethanolysis of PSH have been found to increase with increase in [R₄NI] and this increase becomes more pronounced with increasing hydrophobic surface area of R₄NI. The rate constants for methanolysis of PSH in aqueous mixed solvents containing 80% MeOH (v/v) are independent of [ōH] within the [ōH] range of 0.01 to 0.15 M. The rate of methanolysis could not be detected within ca. 47 h in mixed solvents containing 96% HeOH (3.8% MeCN and 0.2% H₂O), 80% MeOH (19.8% MeCN and 0.2% H₂O), and 0.022 M HCl. It is concluded that for efficient transesterification, PSH should exist in ionized form. The reaction of PSH with MeOH is ca. 400 times faster than that with t-BuOH which could be ascribed to the most likely steric effect. The values of ΔH* and ΔS* obtained for methanolysis and ethanolysis are essentially independent of [ROH] within the ROH content of 20% to 96% for MeOH and 50% to 96% for EtOH. The effect of organic co-solvent on rate of hydrolysis of PSH could be explained in terms of organic co-solvent-induced water polarization.     

Organic gels prepared from side‐chain liquid crystalline polymers without the spacer

A series of side‐chain liquid crystal polymers (SCLCPs) without the spacer, named poly[ω‐(4′‐n‐alkyl oxybiphenyl‐4‐oxy)methacrylate (PMBiCm, m = 1, 2, 4, 6, 8, 10, 12, 14, 16, and 18), have been synthesized. The novel polymer organogels were prepared by introducing PMBiCm into common organic solvents. Solubility and gel properties of polymer organogelators differ widely according to the nature of the solvents. In aromatic solvents, PMBiCm completely dissolved in solvent due to good compatibility between biphenyl mesogen group and aromatic solvents. Poly[ω‐(4′‐n‐alkyl oxybiphenyl‐4‐oxy)methacrylate were still insoluble in polar solvents such as acetone, ethanol, DMF, ethylene glycol, and n‐butanol. This behavior resulted from mismatch of solubility parameter between PMBiCm and solvent. Considering the factors of solvent, we have systematically studied 3 organic solvents with different polarities (butyl acetate, n‐butyl amine, and n‐heptane). It is found that the length of the alkoxy tail chain of the SCLCPs has significant influence on gelability and gel thermal stability. In further studies discussed by UV‐Vis spectroscopy, the results revealed that the π‐π stacking interaction of the biphenyl mesogens might be the key factor for guiding the self‐assembly processes and the polymer gel formation. This work is useful to comprehending physical mechanism of polymer organogels. Meanwhile, those expand SCLCPs to a wide range of applications.     

Solvent effects on kinetics of the reaction between 2‐chloro‐3,5‐dinitropyridine and aniline in aqueous and alcoholic solutions of [bmim]BF4

Rate constants, k_A, for the aromatic nucleophilic substitution reaction of 2‐chloro‐3,5‐dinitropyridine with aniline were determined in different compositions of 1‐(1‐butyl)‐3‐methylimidazolium terafluoroborate ([bmim]BF₄) mixed with water, methanol, and ethanol at 25°C. The obtained rate constants of the reaction in pure solvents are in the following order: water > methanol > ethanol > [bmim]BF₄. In these solutions, rate constants of the reaction decrease with the mole fraction of the ionic liquid. Single‐parameter correlations of log k_A versus normalized polarity parameter (E), hydrogen bond acceptor basicity (β), hydrogen bond donor acidity (α), and dipolarity/polarizability (π*) do not give acceptable results in all solutions. Dual‐parameter correlations of log k_A versus E and β also α and β gave reasonable results (e.g., in solutions of water with [bmim]BF₄, the correlation coefficients are 0.994 and 0.996, respectively). The proposed dual‐parameter models demonstrate that the reaction rate constant increases with E, β, and α. The increase in the rate constant is attributed to hydrogen‐bonding interactions (donor and acceptor) of the media with an activated complex of the reaction that has the zwitterionic character. © 2007 Wiley Periodicals, Inc. Int J Chem Kinet 39: 681–687, 2007