Grafting on wool. I. Electron microscopic studies on the location of grafted polymer in wool structure

To determine the location of grafted poly(methyl methacrylate) in orthocortex structure of fine Australian Merino wool fibers, high-resolution electron microscopy was used. Optimal staining conditions for the observation of the deposited polymer were also studied. It was supposed that the grafted polymer is located mainly between the microfibril and matrix and around the protofibrillar subunits, but not in the matrix. The average space occupied by a grafted chain was estimated to be about four times as large as the total residue volume per polymer. It is supposed that the remarkably large space available per polymer chain is related to the excessive swelling seen with respect to the polymer uptake.     

Grafting on wool. II. Stress–strain behavior of grafted fiber in water

The stress–strain behavior and hysteresis properties of various grafted wool fibers were studied. Three distinct regions on the stress–strain curve and hysteresis properties characteristic of the native wool fiber remain substantially intact, even though a large amount of a rigid polymer occurs. It was suggested that the microfibril and the matrix nature in the native wool fiber exist in the grafted wool structures. The electron microscopic results were also supported. These results can be explained on the basis of Menefee's model that the longitudinal mechanical behavior is more directly controlled by a high modulus matrix.     

Synthesis and Dyes Adsorption Properties of Calix[4]crown-grafted Chitosan Chelating Polymer

By the Schiff-base condensation of formacyl calix[4]crown(2) with raw chitosan, a novel calix[4]crown- grafted chitosan chelating polymer(3) was conveniently prepared in good yield. The structure of polymer 3 was confirmed by elemental analysis, infrared(IR) spectrometry and X-ray diffraction(XRD) analysis. The elemental analysis suggests that the grafting degree of calixcrown unit was 22% on the amino groups of chitosan. The morphological characteristic of polymer 3 was studied by scanning electron microscopy(SEM). Polymer 3 possessed loose porous and smooth morphology of surface. The dyes adsorption abilities of polymer 3 for a series of organic dyes[Orange I(OI), Neutral red(NR), Victoria blue B(VB) and Brilliant green(BG)] were studied by solid-liquid adsorption experiments. The adsorption percentages increased from 45%―60%(raw chitosan for dyes) to 75%―90%(polymer 3 for dyes). The highest adsorption percentage reached 89% for VB. The saturated adsorption capacities for OI, NR, VB and BG were as high as 622, 564, 854 and 781 mg/g, respectively. The adsorption abilities kept stable at 70%―90% in the scope of pH=5―9. The adsorption abilities for anionic dye(OI) decreased gradually with the increase of pH and the opposite trend was observed for cationic dyes(NR, BG, VB). The adsorption percentages were 70%―90% after five times' cycles for adsorption.     

Vibrational Study on Structure and Bioactivity of Protein Fibers Grafted with Phosphorylated Methacrylates

In the last decades, silk fibroin and wool keratin have been considered functional materials for biomedical applications. In this study, fabrics containing silk fibers from Bombyx mori and Tussah silk fibers from Antheraea pernyi, as well as wool keratin fabrics, were grafted with phosmer CL and phosmer M (commercial names, i.e., methacrylate monomers containing phosphate groups in the molecular side chain) with different weight gains. Both phosmers were recently proposed as flame retarding agents, and their chemical composition suggested a possible application in bone tissue engineering. IR and Raman spectroscopy were used to disclose the possible structural changes induced by grafting and identify the most reactive amino acids towards the phosmers. The same techniques were used to investigate the nucleation of a calcium phosphate phase on the surface of the samples (i.e., bioactivity) after ageing in simulated body fluid (SBF). The phosmers were found to polymerize onto the biopolymers efficiently, and tyrosine and serine underwent phosphorylation (monitored through the strengthening of the Raman band at 1600 cm⁻¹ and the weakening of the Raman band at 1400 cm⁻¹, respectively). In grafted wool keratin, cysteic acid and other oxidation products of disulphide bridges were detected together with sulphated residues. Only slight conformational changes were observed upon grafting, generally towards an enrichment in ordered domains, suggesting that the amorphous regions were more prone to react (and, sometimes, degrade). All samples were shown to be bioactive, with a weight gain of up to 8%. The most bioactive samples contained the highest phosmers amounts, i.e., the highest amounts of phosphate nucleating sites. The sulphate/sulphonate groups present in grafted wool samples appeared to increase bioactivity, as shown by the five-fold increase of the IR phosphate band at 1040 cm⁻¹.     

Effect of bidispersity in grafted chain length on grafted chain conformations and potential of mean force between polymer grafted nanoparticles in a homopolymer matrix

In efforts to produce polymeric materials with tailored physical properties, significant interest has grown around the ability to control the spatial organization of nanoparticles in polymer nanocomposites. One way to achieve controlled particle arrangement is by grafting the nanoparticle surface with polymers that are compatible with the matrix, thus manipulating the interfacial interactions between the nanoparticles and the polymer matrix. Previous work has shown that the molecular weight of the grafted polymer, both at high grafting density and low grafting density, plays a key role in dictating the effective inter-particle interactions in a polymer matrix. At high grafting density nanoparticles disperse (aggregate) if the graft molecular weight is higher (lower) than the matrix molecular weight. At low grafting density the longer grafts can better shield the nanoparticle surface from direct particle-particle contacts than the shorter grafts and lead to the dispersion of the grafted particles in the matrix. Despite the importance of graft molecular weight, and evidence of non-trivial effects of polydispersity of chains grafted on flat surfaces, most theoretical work on polymer grafted nanoparticles has only focused on monodisperse grafted chains. In this paper, we focus on how bidispersity in grafted chain lengths affects the grafted chain conformations and inter-particle interactions in an implicit solvent and in a dense homopolymer polymer matrix. We first present the effects of bidispersity on grafted chain conformations in a single polymer grafted particle using purely Monte Carlo (MC) simulations. This is followed by calculations of the potential of mean force (PMF) between two grafted particles in a polymer matrix using a self-consistent Polymer Reference Interaction Site Model theory-Monte Carlo simulation approach. Monte Carlo simulations of a single polymer grafted particle in an implicit solvent show that in the bidisperse polymer grafted particles with an equal number of short and long grafts at low to medium grafting density, the short grafts are in a more coiled up conformation (lower radius of gyration) than their monodisperse counterparts to provide a larger free volume to the longer grafts so they can gain conformational entropy. The longer grafts do not show much difference in conformation from their monodisperse counterparts at low grafting density, but at medium grafting density the longer grafts exhibit less stretched conformations (lower radius of gyration) as compared to their monodisperse counterparts. In the presence of an explicit homopolymer matrix, the longer grafts are more compressed by the matrix homopolymer chains than the short grafts. We observe that the potential of mean force between bidisperse grafted particles has features of the PMF of monodisperse grafted particles with short grafts and monodisperse grafted particles with long grafts. The value of the PMF at contact is governed by the short grafts and values at large inter-particle distances are governed by the longer grafts. Further comparison of the PMF for bidisperse and monodisperse polymer grafted particles in a homopolymer matrix at varying parameters shows that the effects of matrix chain length, matrix packing fraction, grafting density, and particle curvature on the PMF between bidisperse polymer grafted particles are similar to those seen between monodisperse polymer grafted particles.     

GRAFTING ONTO WOOL V.RADIATION-INITIATED GRAFTING OF ACRYLIC ACID ONTO WOOL FIBER

This paper deals with graft copolymerization of acrylic acid (AA) onto Xinjiang fine wool.fiber in aqueous medium initiated by gamma rays. Graft copolymerization was carried out by themutual irradiation method in limited air. Percent grafting and percent efficiency have been deter-mined as a function of total dose, dose rate, concentration of monomer, wool weight and reactiontemperature. Graft copolymers are characterized with infrared (IR) spectroscopy, scanning elec-tron microscopy (SEM), and X--ray diffractometer. Properties of the grafts were studied, and compared with the virgin fiber.     

Physical properties of some low polymer content radiation-grafted wool copolymers

Wool copolymers with low polymer content (6–18%) have been prepared by radiation grafting techniques. Supercontraction, density, and formic acid vapor sorption measurements have been used to assess changes in the keratin structure produced by the grafting processes. Kinetic studies of the contractile forces developed in the first (reversible) stage of the supercontraction of wool in lithium bromide showed that grafting with poly(N-methylol acrylamide) or polyacrylonitrile has a “repairing” action which offsets changes in the wool structure produced by the small radiation dose (2 Mrad) used for the grafting process. By contrast, grafting with poly(vinyl acetate) had no repairing effect. The bonds formed by grafting of poly(N-methylol acrylamide) or polyacrylonitrile to keratin do not reduce swelling of the wool by formic acid, which is a measure of effective crosslink density. Grafting with poly(vinyl acetate) led to increased swelling by formic acid, indicating some disruption of the keratin structure during polymerization. It is suggested that the role of the grafted polymer is mainly to stabilize the hydrogen-bonded secondary network by interaction between the polypeptide and polymer chains.     

Size‐selective purification of hepatitis B virus‐like particle in flow‐through chromatography: Types of ion exchange adsorbent and grafted polymer architecture

Hepatitis B virus‐like particles expressed in Escherichia coli were purified using anion exchange adsorbents grafted with polymer poly(oligo(ethylene glycol) methacrylate) in flow‐through chromatography mode. The virus‐like particles were selectively excluded, while the relatively smaller sized host cell proteins were absorbed. The exclusion of virus‐like particles was governed by the accessibility of binding sites (the size of adsorbents and the charge of grafted dextran chains) as well as the architecture (branch‐chain length) of the grafted polymer. The branch‐chain length of grafted polymer was altered by changing the type of monomers used. The larger adsorbent (90 μm) had an approximately twofold increase in the flow‐through recovery, as compared to the smaller adsorbent (30 μm). Generally, polymer‐grafted adsorbents improved the exclusion of the virus‐like particles. Overall, the middle branch‐chain length polymer grafted on larger adsorbent showed optimal performance at 92% flow‐through recovery with a purification factor of 1.53. A comparative study between the adsorbent with dextran grafts and the polymer‐grafted adsorbent showed that a better exclusion of virus‐like particles was achieved with the absorbent grafted with inert polymer. The grafted polymer was also shown to reduce strong interaction between binding sites and virus‐like particles, which preserved the particles’ structure.     

Membranes obtained by preirradiation grafting of acrylic acid onto poly(tetrafluoroethylene–perfluorovinyl ether)

Some properties of the membranes obtained by preirradiation grafting of acrylic acid onto poly(tetrafluoroethylene-perfluorovinyl ether) copolymer (PFA) films have been investigated. The dimensional change caused by grafting and swelling behavior, water uptake, electrical conductivity, and mechanical properties of the grafted films were found to increase as the grafting proceeds. The influence of the preparation conditions (such as preirradiation dose, monomer concentration, grafting temperature, and film thickness) on those properties was studied. These properties were found to be dependent mainly on the degree of grafting regardless of grafting conditions, except at higher monomer concentration (>40 wt %). The electric conductivity and mechanical properties for the membranes obtained at higher AAc concentrations were lower than those obtained at lower ones. Analysis by x-ray microscopy of the grafted films revealed that the grafting begins at the part close to the film surface and proceeds into the central part with progressive diffusion of monomer to give finally homogeneous distribution of the electrolytes in the whole bulk of the polymer. The membranes show good electrochemical and mechanical properties which make them acceptable for practical use as cation-exchange membranes.     

Effects of grafted polymer chains on lamellar membranes

We have investigated the effects of grafted polymer chains [poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide)] on the bending modulus and the intermembrane interactions of lamellar membranes (C(12)E(5) water) by means of a neutron spin-echo and a small-angle x-ray scattering technique. In this study the hydrophilic chain takes the mushroom configuration on the membrane. The bending modulus of the polymer-grafted membranes increases in proportion to the square of the end to end distance of the polymer chain, which agrees well with the theoretical prediction of Hiergeist and Lipowsky [J. Phys. II 6, 1465 (1996)]. From the interlamellar interaction point of view, the mushroom layer is renormalized to the membrane thickness, which enhances the repulsive Helfrich interaction. When the size of the decorated polymer chain increases to the interlamellar distance, however, the mushroom is squeezed so as to optimize the interlamellar potential. Further increase of the grafted polymer size brings a lamellar-lamellar phase separation, where the grafted polymer chains are localized in the dilute lamellar phase and the concentrated lamellar phase forms the onionlike texture.     

Preparation and mechanical properties of water-dispersible hyperbranched polymer grafted carbon black/natural rubber composites by latex blending method

In order to improve the mechanical properties of rubber-matrix composites, carboxyl-terminated hyperbranched poly (2-hydroxypropane-1,2,3-tricarboxylic acid) grafted carbon black (CB-g-CTHBP) was prepared, and it could be stably dispersed in water for up to 90 days. CB-g-CTHBP dispersion and natural rubber latex were blended to obtain NR/CB-g-CTHBP, and the effect of CB-g-CTHBP content on the mechanical properties of composites was discussed. The results show that the dispersibility and wettability of CB-g-CTHBP to composites are significantly improved after grafting hyperbranched polymer onto the surface. Compared with the composite filled with NR/CB, when the amount of filler is 30 phr, tensile strength, tear strength, and shore A hardness of NR/CB-g-CTHBP increase by 54.78%, 55.13%, and 20.96%, respectively. Moreover, CB-g-CTHBP could disperse more evenly in the natural rubber-matrix, and the interaction between CB-g-CTHBP and rubber-matrix could further enhance in the composite.     

Enhancement of mechanical properties of natural rubber with maleic anhydride grafted liquid polybutadiene functionalized graphene oxide

An effective procedure has been developed to synthesize the functionalized graphene oxide grafted by maleic anhydride grafted liquid polybutadiene(MLPB-GO). Fourier transform spectroscopy and X-ray photoelectron spectroscopy indicate the successful functionalization of GO. The NR/MLPB-GO composites were then prepared by the co-coagulation process. The results show that the mechanical properties of NR/MLPB-GO composites are obviously superior to those of NR/GO composites and neat NR. Compared with neat NR, the tensile strength, modulus at 300% strain and tear strength of NR composite containing 2.12 phr MLPB-GO are significantly increased by 40.5%, 109.1% and 85.0%, respectively. Dynamic mechanical analysis results show that 84% increase in storage modulus and 2.9 K enhancement in the glass transition temperature of the composite have been achieved with the incorporation of 2.12 phr MLPB-GO into NR. The good dispersion of GO and the strong interface interaction in the composites are responsible for the unprecedented reinforcing efficiency of MLPB-GO towards NR.     

Studies on Mechanism of Grafting of Polystyrene on Elastomer Backbone

The mechanism of grafting of polystyrene on a polybutadiene (PB) backbone during the preparation of impact-resistant polystyrene was studied by withdrawing samples during propolym-erization from beginning of the reaction to about 25% conversion. Good separation of the “elastomer and graft” fraction of the polymer from the free polystyrene part could be achieved by using 0.24 volume fraction of methanol in (MEK + benzene) + methanol solvent-nonsolvent. IR analysis of the grafted fraction showed that the microstructure of the elastomer remained unaltered. The unsaturation of the samples studied through the bromine number as well as by the perbenzoic acid number was also found to remain unchanged. Formation of free polystyrene started with the onset of polymerization and was faster. During prepolymerization, 80% of styrene converted constantly to form free polystyrene and 20% went into the grafted polymer. The results indicate that grafting is initiated through proton abstraction at the α-carbon of butadiene, most probably by initiator radicals. The grafted polystyrene chains possibly are shorter than free polystyrene chains.     

Radiation-induced grafting of perfluorinated vinyl ether into fluorinated polymer films

We report herein the first successful grafting of perfluorinated vinyl ether monomer into base polymer films by simultaneous radiation method. 2-Bromotetrafluoroethyl trifluorovinyl ether (BrTFF) could be grafted into poly(ethylene-co-tetrafluoroethylene) (ETFE) films by γ-rays irradiation at room temperature. The grafting yield increased linearly with an increase in the dose up to 1400 kGy. The required dose for a satisfactory grafting yield, such as 20%, was as high as ca. 400 kGy probably due to low polymerization reactivity of fluorinated monomers. However, the solvent and catalyst had no positive influence for improving the grafting yield. FTIR spectra and SEM-EDS testified that BrTFF was successfully grafted into ETFE films homogeneously in the perpendicular direction. The thermal analysis of the grafted films further indicated no phase separation between poly(BrTFF) grafts and ETFE films, probably owing to high compatibility of the fluorinated grafts and base polymers.     

Rheological,mechanical and morphological properties of thermoplastic vulcanizates based on NR‐g‐PMMA/PMMA blends

Graft copolymer of natural rubber and poly(methyl methacrylate) (NR‐g‐PMMA) was prepared using semi‐batch emulsion polymerization technique via bipolar redox initiation system. It was found that the grafted PMMA increased with the increase of methyl methacrylate (MMA) concentration used in the graft copolymerization. The NR‐g‐PMMA was later used to prepare thermoplastic vulcanizates (TPVs) by blending with PMMA through dynamic vulcanization technique. Conventional vulcanization (CV) and efficient sulphur vulcanization (EV) systems were studied. It was found that the CV system provided polymer melt with lower shear stress and viscosity at a given shear rate. This causes ease of processability of the TPVs via extrusion and injection molding processes. Furthermore, the TPVs with the CV system showed higher ultimate tensile strength and elongation. The results correspond to the morphological properties of the TPVs. That is, finer dispersion of the small vulcanized rubber particles were observed in the PMMA matrix. Various blend ratios of the NR‐g‐PMMA/PMMA blends using various types of NR‐g‐PMMA (i.e. prepared using various percentage molar ratios of NR and MMA) were later studied via dynamic vulcanization by a conventional sulphur vulcanization system. It was found that increasing the level of PMMA caused increasing trend of the tensile strength and hardness properties but decreasing level of elongation properties. Increasing level of the grafted PMMA in NR molecules showed the same trend of mechanical properties as in the case of increasing concentration of PMMA used as a blend component. From morphological studies, two phase morphologies were observed with a continuous PMMA phase and dispersed elastomeric phase. It was also found that more finely dispersed elastomeric phase was obtained with increasing the grafted PMMA in the NR molecules. Copyright © 2005 John Wiley & Sons, Ltd.     

Perfluorinated polymer film with functional group prepared by radiation-induced grafting

A perfluorinated vinyl ether monomer, 2-bromotetrafluoroethyl trifluorovinyl ether (BrTFF) was grafted into crosslinked poly(tetrafluoroethylene) (cPTFE) films by γ-rays irradiation under different conditions. The irradiation with absorbed doses more than 550 kGy gave the poly(BrTFF) grafted cPTFE membranes with grafting yields of more than 20%. FTIR spectra and SEM-EDS testified that BrTFF was successfully grafted into cPTFE films homogeneously in the film perpendicular direction. TGA analysis of the grafted films indicated that the perfluorinated poly(BrTFF) grafts were phase-separated from the PTFE region due to the crosslinked structure of the cPTFE based film, but the grafted films still had high thermal stability (above 300 °C). DSC measurements showed the decrease of melting temperature, but the increase of both heat of fusion and degree of crystallinity in cPTFE film after grafting. The grafted film, a new kind of perfluorinated polymer with bromine active groups and good mechanical properties, is expected to be modified for new applications.     

多官能单体TMPTA在LDPE表面光接枝聚合研究

以二苯甲酮(BP)为光引发剂、丙酮和水的混合物为溶剂,研究了室温下多官能单体三羟甲基丙烷三丙烯酸酯(TMPTA)在低密度聚乙烯(LDPE)表面的光接枝聚合(λ>300nm).研究表明,多官能单体的接枝速率较快,接枝聚合易产生交联结构,聚合后仍残留双键;延长聚合反应时间、增加单体用量有利于单体接枝转化率的提高;随引发剂用量增加,单体接枝转化率出现一峰值;在研究范围内,混合溶剂中水含量增加可使单体接枝转化率明显提高.扫描电镜观察到接枝膜表面形成了许多小球,表面粗糙度增加,疏水性提高.     

Graft formation and chain scission in blends of polyamide-6 and -6.6 with maleic anhydride containing polymers

The in situ formation of a compatibilizer, consisting of a copolymer of PA grafted onto a maleic anhydride (MA) containing polymer, is essential for the morphology and properties of the corresponding PA blends. In this study four blends, containing PA-6 or PA-6.6 and EPDM-g-MA or poly(styrene-co-maleic anhydride) (SMA; 28 wt % MA), were prepared and characterized. Chemical analyses showed that the amount of PA graft is independent of the blend composition. Going from EPDM-g-MA to SMA the MA content of the original MA-containing polymer increases, which in the corresponding blends results in an increase in the number of PA grafts and a decrease in the length of the PA grafts. In the SMA blends the number averaged molecular weight of the grafted PA is only about 200 g/mol. It is postulated that the water molecule, released upon imide formation at the PA/(MA-containing polymer) interface, hydrolyses a PA amide group, resulting in a new amine end group, which in its turn reacts with the MA-containing polymer, etc. Differential scanning calorimetry shows that the degree of crystallinity of the PA phase is decreased only when the size of the PA phase between the MA-containing polymer domains approaches the PA crystalline lamellar thickness. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 179–188, 1998     

Surface modification of polymers. IV. UV initiated degradation of polymers with stabilizers grafted onto the surface

Polypropylene (PP), Polyethylene (PE), and polystyrene (PS) films were grafted with glycidylmethacrylate in thin surface layers. To the oxiran groups thus grafted onto the surface three UV stabilizers were attached, 4-amino-2,2,6,6-tetramethylpiperidine (AP), 2,4-dihydroxybenzophenone (DHBP), and phenyl 4-aminosalicylate (PAS). The amount of stabilizer grafted onto the surface varied between 25 and 40 nmol/cm² depending on the polymer substrate. The samples were exposed to UV radiation in air, and the degradation and oxidation of the polymers were studied with IR, UV, and ESCA spectroscopy and by stress–strain measurements. PP grafted with AP exhibited a near 20-fold increase in lifetime compared with the unprotected PP, AP did not stabilize the PE or PS samples. DHBP was an efficient stabilizer of PE, the oxidation rate of the grafted sample being 1/2 to 1/3 of the ungrafted. A similar effect was observed when DHBP was grafted onto PP and PS. PAS underwent a rearrangement reaction when irradiated with UV light, and had only a slight stabilizing effect.     

Effects of methyl methacrylate grafting and in situ silica particle formation on the morphology and mechanical properties of natural rubber composite films

The effects of methyl methacrylate (MMA) grafting and in situ formation of silica particles on the morphology and mechanical properties of natural rubber latex (NRL) were investigated. MMA grafting on NRL was carried out using cumyl hydroxy peroxide/tetraethylene pentamine (CHPO/TEPA) as a redox initiator couple. The grafting efficiency of the grafted NR was determined by solvent extractions and the grafted NRL was then mixed with tetraethoxysilane (TEOS), a precursor of silica, coated by adherence to a glass surface to form a film and cured at 80°C. The resultant products were characterized by FT‐IR and transmission electron microscopy. The influence of varying the MMA monomer weight ratio on the surface morphology of the composites was investigated by scanning electron and atomic force microscopy. The PMMA (poly MMA) grafted NRL particles were obtained as a core/shell structure from which the NR particles were the core seed and PMMA was a shell layer. The silane was converted into silica particles by a sol–gel process which was induced during film drying at 80°C. The silica particles were fairly evenly distributed in the ungrafted NR matrix but were agglomerated in the grafted NR matrix. The root‐mean‐square roughness increased with an increasing weight ratio of MMA in the rubber. The in situ silica particles in the grafted NR matrix slightly increased both the modulus and the tear strength of the composite film. Copyright © 2008 John Wiley & Sons, Ltd.