Mixed Langmuir monolayers of gramicidin A and fluorinated alcohols

Mixed monolayers of gramicidin A (GA) and three alcohols, differing in the degree of fluorination, namely C18OH, F18OH, and F8H10OH have been investigated by means of: surface manometry (pi-A isotherms) and Brewster angle microscopy (BAM) aiming at finding appropriate molecules for incorporating gramicidin A for a biosensor design. Our results proved that only the semifluorinated alcohol is appropriate material for this purpose since it forms miscible and homogeneous monolayers with GA within the whole concentration range. The experimental results have been supported by the calculations of van der Waals energy profiles using the Insight II program. Both the hydrogenated and perfluorinated alcohols were found to aggregate at higher surface pressures, which exclude their application for gramicidin-based biosensor construction.     

Molecular packing of functionalized fluorinated lipids in Langmuir monolayers

Fluorinated amphipaths are a fascinating class of compounds, which, despite significant challenges associated with their syntheses, have found use across a number of areas of biotechnology. Applications range from the in vitro stabilization of membrane proteins to the development of enhanced stability intravenous drug and gene delivery systems. More recently, monolayer-forming fluorinated lipids have found use in the 2D crystallization of detergent-solubilized hydrophobic or partially hydrophobic proteins at the air-water interface. In this study, we investigate the surface properties of a novel suite of monolayer forming, partially fluorinated lipids. These modular lipid structures contain a densely fluorinated insertion in the hydrocarbon tail and a synthetically modifiable headgroup. Analyses of surface-pressure area isotherms and X-ray reflectometry profiles reveal that the lipids spread into fluid monolayers and are more compressible than their non-fluorinated counterparts. Furthermore, the data support a model whereby the partially fluorinated chains of the lipid tails form a film which is fundamentally incompatible with detergents and other destabilizing amphipaths.     

Stripes of partially fluorinated alkyl chains: dipolar Langmuir monolayers

Stripelike domains of Langmuir monolayers formed by surfactants with partially fluorinated lipid anchors (F-alkyl lipids) are observed at the gas-liquid phase coexistence. The average periodicity of the stripes, measured by fluorescence microscopy, is in the micrometer range, varying between 2 and 8 microm. The observed stripelike patterns are stabilized due to dipole-dipole interactions between terminal- CF(3) groups. These interactions are particularly strong as compared with nonfluorinated lipids due to the low dielectric constant of the surrounding media (air). These long-range dipolar interactions tend to elongate the domains, in contrast to the line tension that tends to minimize the length of the domain boundary. This behavior should be compared with that of the lipid monolayer having alkyl chains, and which form spherical microdomains (bubbles) at the gas-liquid coexistence. The measured stripe periodicity agrees quantitatively with a theoretical model. Moreover, the reduction in line tension by adding traces (0.1 mol %) of cholesterol results, as expected, in a decrease in the domain periodicity.     

Role of electrostatic interactions for the domain shapes of Langmuir monolayers of monoglycerol amphiphiles

The role of electrostatic interaction in the domain morphology of amide, ether, ester, and amine monoglycerol monolayers (abbreviated as ADD, ETD, ESD, and AMD, respectively) with systematic variation in the molecular structure of the headgroup region is investigated. Experimental studies using Brewster angle microscopy (BAM) and grazing incidence X-ray diffraction (GIXD) show that the characteristic features of the condensed monolayer phase, such as domain morphology, crystallinity, and lattice parameters, are very different for these monoglycerols. Therefore, the intermolecular interactions of the four amphiphilic monoglycerols are investigated in detail. First, the dipole moments of four monoglycerols of similar structure but with different functional groups are calculated by a semiempirical quantum mechanical technique. The dipole moments for monoglycerols follow the sequence AMD < ETD < ESD < ADD for the population of conformers of compounds investigated. The dipolar repulsion energies for the amphiphilic monoglycerols are also calculated for different possible mutual orientations between the dipoles. The calculated dipolar energies also follow the same trend for different possible headgroup orientations. These results can explain the domain shape of the monoglycerols observed experimentally. Second, ab initio calculations on the basis of the HF/6-31G** method are performed for representative monoglycerol headgroup segments. The results show that the intermolecular interaction energy related to dimer formation follows the order ETD < ESD < AMD < ADD segments, similar to that observed in experiment except in the case of the AMD segment. The relative importance of intra- and intermolecular hydrogen bonding in dimers is analyzed. The enhanced role of the intermolecular interaction relative to intramolecular interaction in the case of AMD contributes to the relatively high intermolecular interaction energy for the particular conformation of the dimer of AMD segment as observed from ab initio calculation. The present work shows that the variations in headgroup molecular structure alter drastically the domain shape, and the theoretical calculations conclusively reveal the important role of the electrostatic interactions for the mesoscopic domain architecture.     

Self-organization of a sulfonamido-porphyrin in Langmuir monolayers and Langmuir-Blodgett films

Langmuir monolayers (LM) and Langmuir-Blodgett (LB) films of pure lipophilic meso-tetra(4-dodecylaminosulfophenyl)porphyrin (PC12) and mixed with the anionic surfactant sodium hexadecylsulfate (SHS) were studied. The molecular packing and structure of PC12 and PC12-4SHS with variable surface pressure were investigated by surface pressure-area measurements, steady-state absorption, fluorescence emission and anisotropy, as well as by fluorescence lifetime imaging microscopy (FLIM). At low surface pressure, the porphyrin molecules are organized with the rings tilted on the water surface whereas at high surface pressure the porphyrin rings achieve a more perpendicular arrangement. Using the FLIM images a gradual change of aggregates into large "islands" is observed. Different patterns are observed in the pure PC12 multilayer films (n = 3 and 5) with ordered patches superimposed which are not observed in the PC12-4SHS multilayer LB films.     

Micellization of fluorinated amphiphiles

New cationic fluorinated surfactants and new types of fluorinated surfactants having fluorocarbon–hydrocarbon hybrids, dimeric and polymeric structure have been synthesized recently. Their synthesis requires many steps and consequently requires much time and high expense. Since the fluorinated surfactants have unusual molecular aggregation properties, ¹⁹F-NMR, novel fluorescence probes and cryo-transmission electron microscope techniques have been applied to study their aggregation behaviour in aqueous systems. Their unique characteristics are summarized as follows: (1) the dissolution process from solid state to dissolved aggregate state requires a very long time for the long chain fluorinated surfactants under thermodynamic equilibrium. The equilibration time can be reduced at higher temperatures; (2) interfacial properties and critical micelle concentration (CMC) are influenced by the nature of the hydrophobic terminal groups (CF₃− or HCF₂−); (3) the fluorocarbon functionality can make it possible even for single-chain amphiphiles to form vesicles or lamellar structures; (4) the hybrid surfactant made of both hydrocarbon and fluorocarbon chains showed a life time of 2.0×10⁻³ s for the exchange rate between the monomeric and the micellar states at the CMC and moreover, these detergents can cosolubilize fluorocarbon–hydrocarbon mixed solubilizates.     

Langmuir films of (alpha-amino) phosphorus amphiphiles on various ion-containing subphases

Monolayers of amphiphilic (alpha-amino)phosphonocarboxylic and (alpha-amino)phosphonic acids have been formed by adsorption at the air/water interface. The influence of both the ionic strength and the pH of the subphase on the stability and compactness of the monolayers have been studied. The stability and the compactness of the Langmuir films are enhanced by introduction of metallic ions such as Ca(2+) or Mg(2+) in the subphases. These effects are more pronounced with Ca(2+). These metal ions can form dimeric complexes with the phosphorus moieties of the surfactant polar heads and therefore bring the amphiphiles closer. For the less hydrophobic derivative, complexation with Ca(2+) or Mg(2+) is required to ensure the formation of a stable monomolecular film. For both phosphonocarboxylic and phosphonic compounds, models have been proposed to represent the complexation phenomenon at the air/water interface.     

Miscibility behavior of dipalmitoylphosphatidylcholine with a single-chain partially fluorinated amphiphile in Langmuir monolayers

Surface pressure-area, surface potential-area, and dipole moment-area isotherms were obtained for monolayers made from a partially fluorinated surfactant, (perfluorooctyl)undecyldimorpholinophosphate (F8H11DMP), dipalmitoylphosphatidylcholine (DPPC), and their combinations. Monolayers, spread on a 0.15 M NaCl subphase, were investigated at the air/water interface by the Wilhelmy method, ionizing electrode method, and fluorescence microscopy. Surface potentials were analyzed using the three-layer model proposed by Demchak and Fort. The contribution of the dimorpholinophosphate polar head group of F8H11DMP to the vertical component of the dipole moment was estimated to be 4.99 D. The linear variation of the phase transition pressure as a function of F8H11DMP molar fraction (X(F8H11DMP)) demonstrated that DPPC and F8H11DMP are miscible in the monolayer. This result was confirmed by deviations from the additivity rule observed when plotting the molecular areas and the surface potentials as a function of X(F8H11DMP) over the whole range of surface pressures investigated. Assuming a regular surface mixture, the Joos equation, which was used for the analysis of the collapse pressure of mixed monolayers, allowed calculation of the interaction parameter (xi=-1.3) and the energy of interaction (Delta epsilon =537 Jmol(-1)) between DPPC and F8H11DMP. The miscibility of DPPC and F8H11DMP within the monolayer was also supported by fluorescence microscopy. Examination of the observed flower-like patterns showed that F8H11DMP favors dissolution of the ordered LC phase domains of DPPC, a feature that may be key to the use of phospholipid preparations as lung surfactants.     

Oligofunctional amphiphiles featuring geometric core group preorganization: synthesis and study of Langmuir and Langmuir-Blodgett films

Based on the principle of supramolecular preorganization, a new type of oligofunctional amphiphile, of which compounds 1-4 are representative structures, has been designed and synthesized. The typical feature of their structure is a highly rigid and geometrically well-defined central unit composed of ethynylene substituted aromatic spacers with different numbers of amphiphilic segment groups (also of a rigid geometric design) attached to it. The molecules form well-defined Langmuir films when spread from a solution at the air/water interface or when a 10(-4) M aqueous CaCl2 solution was used as the subphase. By analysis of the surface pressure-surface area (pi-A) isotherms, information on the packing behavior and orientation of the amphiphilic molecules depending on the molecular structure could be obtained. Morphological characterization of the dynamic process of monolayer compression at the air/water interface was carried out by Brewster angle microscopy, illustrating several phase states visualized as snap shots. Thin monolayer films produced on a 10(-4) M aqueous CaCl2 subphase can be transferred to a mica solid support by the Langmuir-Blodgett technique. Tapping mode atomic force microscopy reveals a surface topography of the monofilms composed of 1 and 3 that differ in roughness and also in the properties of elasticity, hardness and adhesive strength. X-Ray crystal structure analysis of three relevant intermediate compounds of the synthesis were successfully determined giving an indication of the potential structural features inherent in the new amphiphiles.     

Langmuir monolayers and Langmuir–Blodgett films of 1-acyl-1,2,4-triazoles

New 1-acyl-1,2,4-triazoles (ATs) with different n-alkyl chain lengths from C2 to C18 were synthesized. ATs with long n-alkyl chains (C12 and larger) are non-charged amphiphilic molecules with a polar triazole head group. The Langmuir isotherms of ATs at the air–water interface with 12 (DoT-C12), 14 (MyT-C14), 16 (PaT-C16) and 18 (StT-C18) carbon atoms in their n-alkyl chains were studied using surface pressure-mean molecular area (π-mmA) measurements. Characteristic for the Langmuir isotherms of PaT-C16 and StT-C-18 was the first sharp increase of the surface pressure at a mmA value of 20 Å² marking a transition of the ATs from the gaseous state with n-alkyl chains already oriented perpendicular to the water surface to a condensed state. The collapse of the monolayers occurred between 20 and 36 mN m⁻¹ with a typical ‘spike’ in the isotherms of MyT-C14, PaT-C16 and StT-C18 which can be assigned to the buckling and subsequent folding of the monolayer. After the collapse point a pseudo-plateau region of slightly increasing surface pressure appeared for all ATs from C12 to C18 indicating a trilayer formation by the roll-over mechanism for MyT-C14, PaT-C16 and StT-C18. Upon further compression the final collapse occurred at π values between 59 and 67 mN m⁻¹. From reversibility studies it was found that the Langmuir isotherms of the ATs were irreversible. The morphology of Langmuir–Blodgett films of ATs transferred onto silicon wafers was studied by atomic force microscopy.     

Radiation-induced grafting of perfluorinated vinyl ether into fluorinated polymer films

We report herein the first successful grafting of perfluorinated vinyl ether monomer into base polymer films by simultaneous radiation method. 2-Bromotetrafluoroethyl trifluorovinyl ether (BrTFF) could be grafted into poly(ethylene-co-tetrafluoroethylene) (ETFE) films by γ-rays irradiation at room temperature. The grafting yield increased linearly with an increase in the dose up to 1400 kGy. The required dose for a satisfactory grafting yield, such as 20%, was as high as ca. 400 kGy probably due to low polymerization reactivity of fluorinated monomers. However, the solvent and catalyst had no positive influence for improving the grafting yield. FTIR spectra and SEM-EDS testified that BrTFF was successfully grafted into ETFE films homogeneously in the perpendicular direction. The thermal analysis of the grafted films further indicated no phase separation between poly(BrTFF) grafts and ETFE films, probably owing to high compatibility of the fluorinated grafts and base polymers.     

Flow-induced patterning of Langmuir monolayers

Insoluble monolayers on water have been patterned at the macroscopic scale (i.e., at the centimeter scale of the flow apparatus) as well as the mesoscopic scale (i.e., down to the micron scale resolvable via optical microscopy). The macroscopic patterning at the air/water interface results from a hydrodynamic instability leading to a steadily precessing flow pattern. The velocity field is measured, and the associated shear stress at the interface is shown to be locally amplified by the flow pattern. The resulting hydrodynamic effects on two different monolayer systems are explored: (1) the pattern in a model monolayer consisting of micron-size, surface-bound particles is visualized to show that the particles are concentrated into isolated regions of converging flow with high shear, and (2) Brewster angle microscopy of a Langmuir monolayer (vitamin K1) shows not only that the monolayer is patterned at the macroscopic scale but also that the localized high-shear flow further patterns the monolayer at the mesoscale.     

On the formation of calcium carbonate thin films under Langmuir monolayers of stearic acid

In this publication, we describe the growth of thin films of calcium carbonate beneath Langmuir monolayers of stearic acid. The size and shape of the crystalline structures were systematically studied by means of different microscopic techniques including Brewster angle microscopy, atomic force microscopy and scanning electron microscopy. In a series of experiments, we explored the calcium carbonate crystallization process for different lipid monolayers and subphases. The observed phenomena support a crystallization process which is induced by a thin, film-like structure of a precursor phase. The basic processes of crystal and aggregate formation can be represented by a simple model which is based on electrostatic interactions between the surfactant film and the inorganic calcium carbonate structures.     

Langmuir monolayers of bent-core molecules

A systematic study of five different, symmetric bent-core liquid crystals in Langmuir thin films at the air/water interface is presented. Both the end chains (siloxane vs hydrocarbon) and the core (more or less amphiphilic) are varied, to allow an exploration of different possible layer structures at the interface. The characterization includes systematic surface pressure isotherms, Brewster angle microscopy, and surface potential measurements. The properties of these layers are strongly dependent on the individual type of molecule: the molecules with amphiphilic end chains lie quite flat on the surface, while the molecules with hydrophobic end chains construct multilayer structures. In both cases, the three-dimensional collapse structure is reversible.     

Copolyimides containing alicyclic and fluorinated groups: Characterization of the film microstructure

The microstructures of a series of copolyimide films were characterized with different experimental methods such as density measurements, X‐ray diffraction, ultraviolet‐visible spectrophotometry, positron annihilation spectroscopy, and dynamic mechanical analysis. The experimental data were linked to the chemical structures of the polymers and especially the alicyclic and fluorinated monomers. Some analysis responses were directly dependent on the fluorine atoms and, therefore, did not provide clear information about the microstructures. The chain organization in the amorphous films appeared to be significantly dependent on the effect of the casting solvent. The influence of the alicyclic group content was quite significant for a nonsubstituted diamine but was strongly attenuated with a fluorinated diamine. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 2998–3010, 2003     

Cyclosiloxane-based liquid-crystalline elastomers containing fluorinated mesogens and chiral crosslinking groups

A series of chiral fluorinated liquid-crystalline elastomers (LCEs) IP-VIP are prepared by 4-cyano-3-fluorophenyl 4′-(undec-10-enoyloxy)biphenyl-4-carboxylate, isosorbide bis(4-allyloxybenzoate) and 2,4,6,8-tetramethylcyclotetrasiloxane via Pt-catalyzed hydrosilylation. The chiral crosslinking moieties increase from IP to IVP. The elastomers IP, IIP, and IIIP containing low content of chiral crosslinking moieties display S_C ^* liquid-crystalline phase, but IVP, VP, and VIP do not show S_C ^* phase except for N^* mesophase. The mesophase is testified according to typical diffractogram measured by X-ray diffraction (XRD) analysis. The layer spacings of the LCEs decrease from IP (d-spacing of 34.2 Å) to VIP (d-spacing of 31.6 Å) with increase of chiral crosslinking groups in the polymers systems. Moreover, the optical properties are performed by ultraviolet–visible–near-infrared spectrophotometry. VP and VIP containing the most chiral crosslinking moieties display maximum reflection in near infrared spectra in the measurement of optical properties, while IP, IIP, IIIP, and IVP do not show obvious maximum reflection. It is interesting that a specific reflection of circularly polarized light appears along with a changing mesophase due to high enough concentration of chiral crosslinking dopants for VP and VIP. All these results suggest that the chiral crosslinking moieties exert influence on the structures of these kinds of LCEs.     

Mixed monolayers of polymethacrylic esters containing aromatic and aliphatic groups

The interfacial properties of mixtures of polymethacrylic polymers containing either aromatic or aliphatic side groups were studied at water-air interface in order to define the role of geometrical orientation on surface compatibility and the effect of aromatic interactions on ordered bidimensional systems. Two binary systems were studied: polyphenylmethacrylate/ polyhexylmethacrylate and polyphenylmethacrylate/polybenzylmethacrylate.Surface pressure and surface potential measurements were performed in the 288–303 K temperature range on the mixtures at different polymer concentrations. Further information was obtained from ellipsometric measurements and scanning electron microscopy of the collapsed material. The experimental results allow for the conclusion that both polymers containing aromatic groups are almost ideally miscible whereas mixtures of aliphatic and aromatic polymers are completely immiscible.     

Photo-induced liquid crystal alignment on polyimide containing fluorinated groups

Polyimides were prepared from pyromellitic dianhydride, 4,4'-bis[2-(4-aminophenyl)hexafluoroprop-2-yl]diphenyl ether and 4,4'-diamodiphenyl ether (PMDA-BDAF-ODA) and used for liquid crystal alignment using linearly polarized UV exposure. The alignment properties of a LC on the polyimide films were found to depend on the fluorine content in the PMDA-BDAF-ODA alignment layer and on the UV exposure time. Pretilt angles were obtained in the range 0° to 90° dependent upon the fluorine content in the polyimide film and the UV exposure time. These effects seem to be closely related to the surface energy of the photo-alignment layer.