Analysis of leachable and total trace metals in air particulate matters by capillary electrophoresis

A new analytical procedure was developed for simultaneous determination of ammonium, leachable and total metals in fine and coarse air particulate matters using a new capillary electrophoresis (CE) procedure, with a new buffer system containing 10 mM histidine, 2 mM 18-crown-6 and 8 mM lactic acids with pH adjusted to 4.0. A two complexes system, 18-crown-6 ether and lactic acid, was developed to solve the co-migration problem of NH(4)(+) and K(+) and to give satisfactory separation of transition metals. Satisfactory separation and quantitation of NH(4)(+), K(+), Ca(2+), Na(+) , Mg(2+) and Zn(2+) were obtained using the CE procedure developed for both leachable and total metals in coarse (10-3 mum) and fine (<3 mum) air particulate matters. Wide working ranges (ppb to ppm range) and sensitive detection limits (ppb) were obtained for the cations investigated. The reliability was established by parallel method comparison with the ICP-AES method. The analytical procedure developed is shown to provide a quick, sensitive, precise and economic method for simultaneous determination of ammonium, leachable and total metals in air particulate matters.     

Evaluation of microchip capillary electrophoresis with external contactless conductivity detection for the determination of major inorganic ions and lithium in serum and urine samples

The determination of inorganic ions in clinical samples in less than 90 seconds was demonstrated for microchip capillary electrophoresis using capacitively coupled contactless conductivity detection (C(4)D). Bare electrophoresis chips were used in combination with external electrodes which were part of the chip holder. In order to achieve the required selectivity and sensitivity, an optimization of the electrode layout was carried out. Limits of detection (LOD) of 1 microM for K(+), 1.5 microM for Ca(2+), 3 microM for Na(+), 1.75 microM for Mg(2+) and 7.5 microM for Li(+) were achieved. The determination of inorganic cations (NH(4)(+), K(+), Na(+), Ca(2+), Mg(2+)) and anions (Cl(-), NO(3)(-), SO(4)(2-), phosphate) in blood serum and urine samples was possible in one common electrolyte solution containing 15 mM L-arginine, 10.75 mM maleic acid and 1.5 mM 18-crown-6 at pH 5.90 by simply switching the separation voltage from positive to negative polarity. Lithium, present at significant levels when used for therapeutic purposes, can also be determined in blood serum using a slightly modified background electrolyte solution.     

Separation and determination of cations in beverage products by capillary zone electrophoresis

Cation determination is important for quality control of beverage products. To determine a large group simultaneously, a capillary electrophoresis procedure is developed with indirect UV at 214 nm in a three-complex buffer system (10 mM N,N-dimethylbenzylamine (DBA), 8 mM lactic acid and 2 mM 18-crown-6) with good mobility matching with desired cations. Under optimized conditions with pH adjusted to 4.65, a baseline separation is achieved for 14 cations (Rb(+), NH(4)(+), K(+), Ca(2+), Na(+), Mg(2+), Mn(2+), Co(2+), Fe(2+), Cd(2+), Cr(3+), Ni(2+), Zn(2+) and Cu(2+)) within 7 min using an uncoated silica column. To cover ng/l to mug/l range, both hydrostatic and electrokinetic sampling are studied, showing working ranges within (0.05-50)/(0.005-2) microg/l and detection limits (13-78)/(1.4-10) ng/l, respectively with satisfactory repeatability (RSD 0.31-0.47% for migration time, and 3.0-4.0% for peak height measurement). Agreeable results with established inductively coupled plasma-atomic emission spectrometry method have been obtained for orange juice and tea samples.     

The solvent extraction of alkali metal picrates with 4,13-N,N'-dibenzyl-4,13-diaza-18-crown-6

Extraction of alkali metal picrates with N,N'-dibenzyl-18-crown-6 was carried out, with dichloromethane as water-immiscible solvent, as a function [ligand]/[metal cation]. The extractability of metal picrates (Li(+), Na(+), K(+), Rb(+), Cs(+)) was evaluated as a function of [L]/[M(+)]. The extractability of complex cation-picrate ion pairs decreases in this sequence: Li(+)>Rb(+)>Cs(+)>K(+)>Na(+). The overall extraction equilibrium constants (K(ex)) for complexes of N,N'-dibenzyl-18-crown-6 with alkali metal picrates between dichloromethane and water have been determined at 25 degrees C. The values of the extraction constants (logK(ex)) were determined to be 10.05, 6.83, 7.12, 7.83, 6.73 for Li(+), Na(+), K(+), Rb(+) and Cs(+) compounds, respectively. DB186 shows almost 2-fold extractability against Li(+) compared to the other metal picrates, whereas it shows no obvious extractability difference amongst the other metal cations when [L]/[M(+)] is 0.2-1. However, an increasing extractability is observed for Cs(+) when [L]/[M(+)] [1].     

Application of an external contactless conductivity detector for the analysis of beverages by microchip capillary electrophoresis

Quantitative total ionic analysis of alcoholic and nonalcoholic beverages was performed by microchip capillary electrophoresis with external contactless conductivity detection. An electrolyte solution consisting of 10.5 mM histidine, 50 mM acetic acid, and 2 mM 18-crown-6 at pH 4.1 was used for the determination of NH(4) (+), K(+), Ca(2+), Na(+), and Mg(2+). Fast analysis of Cl(-), NO(3) (-), and SO(4) (2-) was achieved in 20 mM 2-(N-morpholino)ethanesulfonic acid /histidine electrolyte solution at pH 6.0 and the simultaneous separation of up to 12 inorganic and organic anions was performed in a solution containing 10 mM His and 7 mM glutamic acid at pH 5.75. Limits of detection ranged from 90 to 250 mug/L for inorganic cations and anions, and from 200 to 2000 mug/L for organic anions and phosphate. Calibration curves showed linear dependencies over one to two orders of magnitude when the stacking effect was minimized by injecting standard solutions prepared in background electrolyte solutions. Total analysis times of 35 and 90 s were achieved for the determination of 5 inorganic cations and for the simultaneous determination of 12 inorganic and organic anions, respectively, which represents a considerable reduction of analysis time compared to conventional separation methods used in food analysis.     

Competitive cesium-133 NMR spectroscopic study of complexation of different metal ions with dibenzo-21-crown-7 in acetonitrile-dimethylsulfoxide and nitromethane-dimethylsulfoxide mixtures

(133)Cs NMR spectroscopy was used to determine the stoichiometry and stability of the Cs(+) ion complex with dibenzo-21-crown-7 (DB21C7) in acetonitrile-dimethylsulfoxide (96.5:3.5, w/w) and nitromethane-dimethylsulfoxide (96.5:3.5, w/w) mixtures. A competitive (133)Cs NMR technique was also employed to probe the complexation of Na(+), K(+), Rb(+), Ag(+), Tl(+), NH(4)(+), Mg(2+), Ba(2+), Hg(2+), Pb(2+) and UO(2)(2+) ions with DB21C7 in the same solvent systems. All the resulting 1:1 complexes in nitromethane-dimethylsulfoxide were more stable than those in acetonitrile-dimethylsulfoxide solution. In both solvent systems, the stability of the resulting complexes was found to vary in the order Rb(+)>K(+) approximately Ba(2+)>Tl(+)>Cs(+)>NH(4)(+) approximately Pb(2+)>Ag(+)>UO(2)(2+)>Hg(2+)>Mg(2+)>Na(+).     

High-speed simultaneous ion-exclusion/cation-exchange chromatography of anions and cations on a weakly acidic cation-exchange resin column

The simultaneous ion-exclusion/cation-exchange separation column packed with a polymethacrylate-based weakly acidic cation-exchange resin of 3 microm particle size was used to achieve the simultaneous high-speed separation of anions and cations (Cl(-), NO3(-), SO4(2-), Na(+), K(+), NH4(+), Ca(2+) and Mg(2+)) commonly found in environmental samples. The high-speed simultaneous separation is based on a combination of the ion-exclusion mechanism for the anions and the cation-exchange mechanism for cations. The complete separation of the anions and cations was achieved in 5 min by elution with 15 mM tartaric acid-2.5 mM 18-crown-6 at a flow-rate of 1.5 ml/min. Detection limits at S/N=3 ranged from 0.36 to 0.68 microM for anions and 0.63-0.99 microM for cations. This method has been applied to the simultaneous determination of anions and cations in several environmental waters with satisfactory results.     

Extraction equilibria of various metal picrates with 19-crown-6 between benzene and water. Effect of the extra methylene group on extraction ability and selectivity

The overall extraction equilibrium constants (K(ex)) of picrates of Li(+), Na(+), K(+), Rb(+), Cs(+), Ag(+), Tl(+), and Sr(2+)with 19-crown-6 (19C6) were determined between benzene and water at 25 degrees C. The K(ex) values were analyzed into the constituent equilibrium constants, i.e. the extraction constant of picric acid, the distribution constant of the crown ether, the formation constant of the metal ion-crown ether complex in water, and the ion-pair extraction constant of the complex cation with the picrate anion. The effects of an extra methylene group of 19C6 on the extraction ability and selectivity are discussed in detail by comparing the constituent equilibrium constants of 19C6 with those of 18-crown-6 (18C6). The K(ex) value of 19C6 for each metal ion is lower than that of 18C6, which is mostly attributed to the higher lipophilicity of 19C6. The extraction ability of 19C6 for the univalent metal ions decreases in the order Tl(+)>K(+)>Rb(+)>Ag(+)>Cs(+)>Na(+)Li(+), which is the same as that observed for 18C6. The difference in logK(ex) between the univalent metals is generally smaller for 19C6 than for 18C6. The extraction selectivity of 19C6 is governed by the selectivity in the ion-pair extraction, whereas that of 18C6 depends on both the selectivities in the ion-pair extraction and in the complexation in water.     

Ion-pair formation between Cd(II), Na(I), and Ag(I) complex ions with 18-crown-6 ether derivatives and various pairing anions in water: an understanding of the ion-pair formation based on the HSAB principle

The ion-pair formation constants (K(MLX)(0)/mol(-1) dm(3)) of CdL(2+) with Br(-) or NaL(+) with N,N-diethyldithiocarbamate ion (DDTC(-)) in water were determined potentiometrically at 25°C; ionic strength (I)→0: L denotes 18-crown-6 ether (18C6) and its mono-benzo derivative for the CdBr(2)-L system and 15-crown-5 ether and 18C6 for the NaDDTC-L one. The formation constant corresponding to the simple salt, NaDDTC, in water was also determined at I→0. Using the log K(CdLX)(0) values of CdLCl(+), CdLBr(+), CdLPic(+), and CdLSO(4), then CdL(2+) and picrate ion (Pic(-)) in water have been classified with the hard and soft acids and bases principle, where the values were available in the literature, except for CdLBr(+). The same classification was examined in NaX-L systems with X(-) = DDTC(-), trifluoroacetate ion, MnO(4)(-), ReO(4)(-), Pic(-), and BPh(4)(-) and the AgPic-L one. Consequently, CdL(2+), NaL(+), and AgL(+) were classified as the hard acids, while Pic(-) and BPh(4)(-) as the hard bases. These results reflected the reactivities of the complex ions in ion-pair formation with X(-) and SO(4)(2-) in water.     

A ratiometric probe for the selective time-gated luminescence detection of potassium in water

A europium probe for the ratiometric detection of potassium in water is presented. This probe demonstrates high sensitivity, with an affinity for K(+) in the mM range, and high selectivity for K(+) over Na(+), Ca(2+), Mg(2+) and Li(+). The long luminescence lifetime of the probe and its large Stokes shift further enable accurate determination of the concentration of K(+) in complex aqueous media.     

Ion-exclusion/cation-exchange chromatographic determination of common inorganic ions in human saliva by using an eluent containing zwitterionic surfactant

Ion-exclusion/cation-exchange chromatography with an eluent containing the bile salt-type zwitterionic surfactant CHAPS was performed in order to evaluate variations in anion (SO(4)(2-), NO(3)(-), and SCN(-)) and cation (Na(+), K(+), NH(4)(+), Mg(2+), and Ca(2+)) concentrations in human saliva. CHAPS prevents the adsorption of proteins to the stationary phase, i.e., weakly acidic cation-exchange resin, since it aggregates proteins without denaturing them. Addition of 1mM CHAPS to the eluent comprising 6mM tartaric acid and 7 mM 18-crown-6 yielded reproducible separations of anions and cations in protein-containing saliva. The resolutions of anions and cations were not significantly affected by the addition of CHAPS to the eluent. The concentrations of Na(+) and K(+) varied before and after meals; or that of SCN(-), upon smoking. The relative standard deviations of peak areas ranged from 0.3 to 5.1% in 1 day (n=20) and from 1.4 to 5.8% over 6 days (n=6).     

Determination of ammonia, creatinine and inorganic cations in urine using CE with contactless conductivity detection

CE with capacitively coupled contactless conductivity detection (C(4)D) was used to determine waste products of the nitrogen metabolism (ammonia and creatinine) and of biogenic inorganic cations in samples of human urine. The CE separation was performed in two BGEs, consisting of 2 M acetic acid + 1.5 mM crown ether 18-crown-6 (BGE I) and 2 M acetic acid + 2% w/v PEG (BGE II). Only BGE II permitted complete separation of all the analytes in a model sample and in real urine samples. The LOD values for the optimized procedure ranged from 0.8 microM for Ca(2+) and Mg(2+) to 2.9 microM for NH(4)(+) (in terms of mass concentration units, from 7 microg/L for Li(+) to 102 microg/L for creatinine). These values are adequate for determination of NH(4)(+), creatinine, Na(+), K(+), Ca(2+) and Mg(2+) in real urine samples.     

Indirect ultraviolet spectrophotometric detection in the ion chromatography of common mono- and divalent cations on an aluminium adsorbing silica gel column with tyramine-containing crown ethers as eluent

The application of laboratory-made aluminium-adsorbing silica gel (Al-Silica) as a cation-exchange stationary phase to ion chromatography-indirect photometric detection (IC-IPD) for common mono- and divalent cations (Li+, Na+, NH+, K+, Mg2+ and Ca2+) was carried out by using protonated tyramine (4-aminoethylphenol) as eluent ion. When using 1.2 mM tyramine-0.2 mM oxalic acid at pH 4.5 as eluent, incomplete separation of the monovalent cations and complete separation of the divalent cations were achieved in 17 min. Then, the addition of crown ethers in the eluent was carried out for the complete separation of the mono- and divalent cations. As a result, when using 1.2 mM tyramine--0.2 mM oxalic acid at pH 4.5 containing either 5 mM 15-crown-5 (1,4,7,10,13-pentaoxacyclopentadecane) or 0.5 mM and 18-crown-6 (1,4,7,10,13,16-hexaoxacyclooctadecane) as eluent, excellently simultaneous separation of these cations was achieved in 21 min. The proposed IC-IPD was successfully applied to the determination of major cations in natural water samples.     

UV and IR spectroscopic studies of cold alkali metal ion-crown ether complexes in the gas phase

We report UV photodissociation (UVPD) and IR-UV double-resonance spectra of dibenzo-18-crown-6 (DB18C6) complexes with alkali metal ions (Li(+), Na(+), K(+), Rb(+), and Cs(+)) in a cold, 22-pole ion trap. All the complexes show a number of vibronically resolved UV bands in the 36,000-38,000 cm(-1) region. The Li(+) and Na(+) complexes each exhibit two stable conformations in the cold ion trap (as verified by IR-UV double resonance), whereas the K(+), Rb(+), and Cs(+) complexes exist in a single conformation. We analyze the structure of the conformers with the aid of density functional theory (DFT) calculations. In the Li(+) and Na(+) complexes, DB18C6 distorts the ether ring to fit the cavity size to the small diameter of Li(+) and Na(+). In the complexes with K(+), Rb(+), and Cs(+), DB18C6 adopts a boat-type (C(2v)) open conformation. The K(+) ion is captured in the cavity of the open conformer thanks to the optimum matching between the cavity size and the ion diameter. The Rb(+) and Cs(+) ions sit on top of the ether ring because they are too large to enter the cavity of the open conformer. According to time-dependent DFT calculations, complexes that are highly distorted to hold metal ions open the ether ring upon S(1)-S(0) excitation, and this is confirmed by extensive low-frequency progressions in the UVPD spectra.     

Determination of common inorganic anions and cations by non-suppressed ion chromatography with column switching

An ion chromatography (IC) method has been proposed for the determination of seven common inorganic anions (F(-), H(2)PO(4)(-), NO(2)(-), Cl(-), Br(-), NO(3)(-), and SO(4)(2-)) and/or five common inorganic cations (Na(+), NH(4)(+), K(+), Mg(2+), and Ca(2+)) using a single pump, a single eluent and a single detector. The present system used cation-exchange and anion-exchange columns connected in series via a single 10-port switching valve. The 10-port valve was switched for the separation of either cations or anions in a single chromatographic run. When 1.0mM trimellitic acid (pH 2.94) was used as the eluent, the seven anions and the five cations could be separated on the anion-exchange column and the cation-exchange column, respectively. The elution order was found to be F(-)相似文献   

Differential effects of oligosaccharides on the hydration of simple cations

Changed ion hydration properties near surfaces, proteins, and deoxyribose nucleic acid have been reported before in the literature. In the present work, we extend this work to carbohydrates: We have performed classical-mechanical molecular dynamics simulations to study solvation properties of simple cations of biological relevance (Na(+),K(+),Mg(2+),Ca(2+)) in explicit water, near single and multiple oligosaccharides as glycocalyx models. We find that our oligosaccharides prefer direct contact with K(+) over Na(+), but that the Na(+) contacts are longer lived. These interactions also lead to strong but short-lived changes in oligosaccharide conformations, with oligosaccharides wrapping around K(+) with multiple contacts. These findings may have implications for current hypotheses on glycocalyx functions.     

Fluorescence and NMR binding studies of N-aryl-N'-(9-methylanthryl)diaza-18-crown-6 derivatives

N-Aryl-N'-(9-methylanthryl)diaza-18-crown-6 derivatives perform as fluorescent photoinduced electron-transfer (PET) sensors with very selective response toward Ca(2+) versus Mg(2+), Na(+), and K(+). The fluorescence intensity was increased by a factor of up to 170 in the presence of Ca(ClO(4))(2). (1)H NMR studies show that metal cations affect these molecules very differently: Ca(2+) has a global effect on each molecule, while Mg(2+) affects part of each molecule, and K(+) and Na(+) affect each molecule moderately, which is very consistent with the fluorescence response.     

Simultaneous determination of organic and cationic species in explosives residues with column-switching liquid chromatography-ion chromatography system

A new column-switching method has been proposed for the determination of 14 organic explosives (1,3,5,7-tetranitro-N-methylaniline, 1,3,5-trinitro-1,3,5-triazacyclohexane, 1,3,5-trinitrobenzene, 1,3-dinitrobenzene, nitrobenzene, 2,4,6-N-tetranitro-N-methylaniline, Trinitrotoluene, 4-amino-2,6-dinitrotoluene, 2-amino-4,6-dinitrotoluene, 2,6-dinitrotoluene, 2,4-dinitrotoluene, 2-nitrotoluene, 4-nitrotoluene, and 3-nitrotoluene) and/or five inorganic cations (Na(+), NH(4)(+), K(+), Mg(2+), and Ca(2+)) using liquid chromatography linked to ion chromatography by a switching valve. The mobile phase was methanol-water (40/60, v/v) for a C18 reversed-phase column and 3 mM of methanesulfonic acid (pH 2.5) for a cation-exchange column, respectively. Under the optimal conditions, the 14 organic explosives and the five inorganic cations were separated and detected simultaneously within 45 min. The limits of detection (S/N = 3) of the 14 organic explosives and the five inorganic cations were in the range of 0.0048-0.0333 mg/L and 0.0116-0.1851 mg/L, respectively. The linear correlation coefficients were 0.9971-0.9999, and the relative standard deviation of the retention time and the peak area were 0.02-0.31% and 0.51-3.64%, respectively. The method was successfully applied to the determination of organic explosives and inorganic cations in dust samples.     

Separation and determination of metal cations in milk and dairy products by CE

To prevent casein adsorption and improve between-run repeatability, a CE procedure is developed for cation analysis in milk using a modified imidazole/alpha-hydroxyisobutyric acid (HIBA) BGE system to operate at pH 6 to match the pH of milk and elevate imidazole concentration to enhance its buffer action. The procedure is shown to produce a fast, economic and efficient method for cation separation in milk with only simple dilution. Upon direct hydrodynamic injection of diluted milk sample at 8 cm for 30 s in an uncoated column with a BGE consisting of 10 mM imidazole, 10 mM HIBA and 10% methanol at pH 6.0 under +18 kV, baseline separation was achieved for K(+), Na(+), Ca(2+), Mg(2+), Mn(2+), Cd(2+), Co(2+), Ni(2+)and Zn(2+). Agreeable results at 95% confidence level were obtained using CE and inductively coupled plasma-atomic emission spectrometry (ICP-AES) for milk samples after protein removal. Baseline-resolved peaks for essential minerals were obtained for fresh and non-refrigerated reconstituted milks. Long-term stability was demonstrated by repeated determinations without rinsing and improvement in repeatability was shown by rinsing with 60 mM SDS in BGE. Information on metal speciation useful for nutritional assessment was obtained from CE to complement the ICP methods.     

Correlation of Solution and Gas Phase Complexation Assessed by Electrospray Ionization Mass Spectrometry: Application to One-, Two-, and Three-Ring Macrocycles

Electrospray ionization mass spectrometry (ESI-MS) was used to probe multiple cation complexation by C(12)H(25)(CH(2))(12)(CH(2))(12)C(12)H(25), 2, and <18N>CH(2)C(6)H(4)CH(2), 3. Complexation of two cations (2Na(+), 2 K(+), or Na(+) and K(+)) by 3 and three cations by 2 (3 Na(+), 3 K(+), and mixtures) as well as mixed proton-metallic cation complexes of both were observed. The K(+)/Na(+) cation-binding selectivity of 18-crown-6 was studied by ESI-MS of a methanol solution, and the selectivity profile was favorably compared with data obtained previously by ion-selective electrode techniques in the same solvent.