Nuclear magnetic resonance spectra of some 2,6-disubstituted spiro[3.3]heptane derivatives

Analysis of the full splitting pattern of the 100 MHz ¹H-NMR spectra of diethyl - 2,6 -dibromospiro[3.3]heptane - 2,6 - dicarboxylate (3) in chloroform and benzene and the 220 MHz ¹H-NMR spectrum of dimethylspiro[3.3]heptane - 2,6 - dicarboxylate (2) in naphthalene has been carried out. Puckering of the cyclobutane rings is revealed. Reasonable agreement with an X-ray study on Fecht acid (1) and with the data from the ¹C-NMR spectra of compounds 2 and 3 has been obtained. The temperature dependency of the ¹H-NMR spectra of 2, 3 and the symmetrically substituted tetraethylspiro[3.3]heptane - 2,2,6,6 - tetracarboxylate (4) has been investigated and is discussed in terms of conformational interconversion.     

Preparation and emission spectra of polymeric 1,2-diketones

Monomers of the methacrylate type, viz. 1-[4-(2-methacroyloxyethoxy)phenyl] propandione-1,2 (7a) and 1-phenyl-2-[4-(2-methacroyloxyethoxy)phenyl] ethandione-1,2 (7b) having the 1,2-dicarbonyl chromophore in the side-chain, were synthesized. The soluble homopolymer of monomer 76 and copolymers of both monomers 7a and 7b with styrene and methyl methacrylate were prepared by radical polymerization in solution. The absorption and emission spectra of a model compound and the homopolymer showed that the 1,2-dicarbonyl chromophore behaved as an isolated unit. No fluorescence was observed for the model compound or the homopolymer in emission spectra of poly(methyl methacrylate)-doped films. Phosphorescence of low- and high-molecular carbonyls was quenched by ferrocene in solution. Comparison of Stern-Volmer constants indicates partial steric hindrance of energy transfer for high-molecular donor.     

The water-soluble indolium-based fluorescence probes for detection of the extreme acidity or extreme alkalinity

In this work, 3,3′-(((1E,1′E)-(H,12H-5,11-methanodibenzo[b,f][1,5]diazocine-2,8-diyl)bis(ethene-2,1-diyl))bis(1,1-dimethyl-1H-benzo[e]indole-3-ium-2,3-diyl))bis(propane-1-sulfonate) (1), 3,3’-(((1E,1′E)-(6H,12H-5,11-methanodibenzo[b,f][1,5]diazocine-2,8-diyl)bis(ethene-2,1-diyl))bis(3,3-dimethyl-3H-indole-1-ium-2,1-diyl))bis(propane-1-sulfonate) (2), 2,2’-((1E,1′E)-(6H,12H-5,11-methanodibenzo[b,f][1,5]diazocine-2,8-diyl)bis(ethene-2,1-diyl))bis(1,3,3-trimethyl-3H-indol-1-ium) iodide (3) and 2,2’-((1E,1′E)-(6H,12H-5,11-methanodibenzo[b,f][1,5]diazocine-2,8-diyl)bis(ethene-2,1-diyl))bis(1,1,3-trimethyl-1H-benzo[e]indol-3-ium) iodide (4) were designed and synthesized by ethylene bridging of the N-substituted indolium salts and the Tröger’s Base (TB) framework. The probes exhibited a longer absorption and emission wavelength and the emission wavelength of them in dichloromethane (DCM) was more than 600 nm, performed a red fluorescence. All of the probes could work on the extreme acidic and the extreme alkaline environments and showed a good liner response in the working pH range. Especially, 2 and 4 were soluble in water and manifested a good pH sensing in a water system. Also, ¹H NMR analysis illustrated how these dyes worked as the pH-sensitive fluorescence probes. In addition, they performed excellent reversibility, high selectivity and good photostability.     

Synthesis of new imines and amines containing organosilicon groups

The Peterson olefination reaction of terephthalaldehyde with tris(trimethylsilyl)methyl lithium, (Me₃Si)₃CLi, in THF at 0 °C gives 4-[2,2-bis(trimethylsilyl)ethenyl]benzaldehyde (1) and 4,4-bis[2,2-bis(trimethylsilyl)ethenyl]benzene (2). The new aldehyde (1) reacts with variety of amines in ethanol to afford the corresponding imines (3) containing vinylbis(trimethylsilyl) group. The newly synthesized imines (3) can be completely converted into amines containing vinylbis(trimethylsilyl) group with an excess amount of NaBH₄. In the case of N-[4-(2,2-bis(trimethylsilyl)ethenyl)benzyl]-2,6-dimethylaniline LiAlH₄ was used as a reducing agent in THF.     

An approach to the synthesis of chemically modified bisazocalix[4]arenes and their extraction properties

Bisazocalix[4]arenes [N,N′-bis(5-azo-25,26,27-tribenzoyloxy-28-hydroxycalix[4]arene)benzene (1), N,N′-bis(5-azo-25,26,27-tribenzoyloxy-28-hydroxycalix[4]arene)biphenyl (2) and N,N′-bis(5-azo-25,26,27-tribenzoyloxy-28-hydroxycalix[4]arene)-2,2′-dinitro biphenyl (3)] have been synthesized from 25,26,27-tribenzoyloxy-28-hydroxycalix[4]arene by diazocoupling with the corresponding aromatic diamines (p-phenylenediamine, 4,4′-diamino biphenyl and 4,4′-diamino-2,2′-dinitrobiphenyl). Extraction studies of bisazocalix[4]arenes 1, 2, and 3 show no difference in their extraction behavior and selectivity, whereas azocalix[4]arenes are a poor extractant for heavy metal cations. The absorption spectra of the prepared bisazocalix[4]arenes are discussed, both the effect of varying pH and solvent upon the absorption ability of bisazocalix[4]arenes.     

In vitro microbial studies of new pyrazolyl quinazolin-4(3H) ones

A series of new 2-[2-(2,6-dichlorophenyl)amino]phenyl methyl-3-[(5-substituted phenyl)-1,5-dihydro-1H-pyrazol-3-yl-amino]-6-iodoquinazolin-4(3H) ones (6a–m) have been synthesized by the reaction of 2-[2-(2,6-dichlorophenyl)amino]phenyl methyl-3-substituted phenyl acryl amido-6-iodoquinazolin-4(3H) ones with hydrazine hydrate in the presence of glacial acetic acid. The chalcone (5a–m) have been prepared by the condensation of 2-[2-(2,6-dichlorophenyl)amino]phenyl methyl-3-acetamido-6-iodoquinazolin-4(3H) one with different substituted aromatic aldehyde. The compound 1 on treatment with 5-iodoanthranilic acid in pyridine undergoes cyclisation gave 2-[2-(2,6-dichlorophenyl)amino]phenyl methyl-6-iodo-3,1-benzoxazin-4(3H) one (2). Treatment on benzoxazine with hydrazine hydrate gave 3-amino-2-[2-(2,6-dichlorophenyl)amino]phenyl methyl-6,8-dibromo quinazolin-4(3H) one (3) followed by acetylation synthesized 2-[2-(2,6-dichlorophenyl)amino]phenyl methyl-3-acetamido-6,8-dibromoquinazolin-4(3H)-one (4). The structure of synthesized compounds has been elucidated by IR, ¹H NMR, ¹³C NMR and elemental analysis. The products were screened for antibacterial and antifungal activity. Among the series containing some of the compounds showed promising results against standard drugs.     

Synthesis of (−)-(4R,5R)-4,5-bis[di-3′-(2′,6′-dimethoxypyridyl)phosphinomethyl]-2,2-dimethyl-1,3-dioxolane and its application in the Rh-catalyzed asymmetric hydrogenation reactions

The chiral ligand (−)-(4R,5R)-4,5-bis[di-3′-(2′,6′-dimethoxypyridyl)phosphinomethyl]-2,2-dimethyl-1,3-dioxolane 3 [(R,R)-Py*-DIOP] was synthesized via a key intermediate bis[3-(2,6-dimethoxypyridyl)]phosphine-borane 9. The asymmetric hydrogenation of prochiral olefins was investigated using a rhodium catalyst containing 3. For the hydrogenation of amidoacrylic acids, enols and itaconic acid, while the enantioselectivity of [Rh-(R,R)-Py*-DIOP] was similar to that of [Rh-(R,R)-DIOP] the absolute configurations of the products from the two catalyst systems were found to be opposite.     

Synthesis of bis-fused tetrathiafulvalene with mono- and dicarboxylic acids

Bis-fused tetrathiafulvalenes with mono- and dicarboxylic acids, 2-{5-(1,3-dithiol-2-ylidene)-[1,3]dithiolo[4,5-d][1,3]dithiol-2-ylidene}-1,3-dithiole-4-carboxylic acid (1) and 2-{5-(1,3-dithiol-2-ylidene)-[1,3]dithiolo[4,5-d][1,3]dithiol-2-ylidene}-1,3-dithiole-4,5-dicarboxylic acid (2) have been synthesized. The electronic structure of 1 and 2 was examined from their optical absorption spectra and using density-functional calculations.     

Acetamidine complexes as catalysts for ethylene polymerization

The reaction of (2,6-diisopropyl-phenyl)-acetimidoyl chloride or (2,6-dimethyl-phenyl)-acetimidoyl chloride with 2,6-dimethylaniline in the presence of triethylamine yields a mixture of isomers N′-(2,6-diisopropyl-phenyl)-N-[1-(2,6-diisopropyl-phenylimino)-ethyl]-N-(2,6-dimethyl)-acetamidine (1a) and N-(2,6-diisopropyl-phenyl)-N-[1-(2,6-diisopropyl-phenylimino)-ethyl]-N′-(2,6-dimethyl)-acetamidine (1b), and N,N′-bis-(2,6-dimethyl-phenyl)-N-[1-(2,6-dimethyl-phenylimino)ethyl)]-acetamidine (2), respectively. The addition of isomers (1a + 1b) to nickel (II) dibromide 2-methoxyethyl ether, (NiBr₂[O(C₂H₄OMe)₂]) gives a mixture of new nickel complexes, [NiBr₂{N′-(2,6-diisopropyl-phenyl)-N-[1-(2,6-diisopropyl-phenylimino)-ethyl]-N-(2,6-dimethyl)-acetamidine}] (3a) and [NiBr₂{N-(2,6-diisopropyl-phenyl)-N-[1-(2,6-diisopropyl-phenylimino)-ethyl]-N′-(2,6-dimethyl)-acetamidine}] (3b). Similarly, ligand 2 reacts with nickel (II) dibromide 2-methoxyethyl ether to afford the complex [NiBr₂{N,N´-bis-(2,6-dimethyl-phenyl)-N-[1-(2,6-dimethyl-phenylimino)ethyl)]-acetamidine}] (4). The structures of the ligands and nickel complexes have been determined by single crystal X-ray diffraction.The addition of MAO to these complexes generates catalytically active species for the homopolymerization of ethylene. The polymer products are high molecular weight (80-169 K). At temperatures of up to 60 °C both catalysts are a single site giving a monomodal molecular weight distribution. However, at 70 °C the mixture (3a + 3b) shows a bimodal molecular weight distribution.     

Anomalous fluorescence and low-temperature absorption spectra of naphtho[1,8-cd][1,2,6] thiadiazine and its derivatives: an example of second excited state emission (S2 → S0)

An anomalous fluorescence near 380 nm is detected from heptane solutions on naphtho[1,8-cd][1,2,6] thiadiazine (1), 6,7-dihydroacenaphtho[5,6-cd][1,2,6]thiadiazone (2), its unsaturated derivative (4), and the tetrachloro derivative of 1 (3), when these substances are excited into the S₀→S₂ absorption band near 350 nm. Excitation spectra verify that S₂→S₀ fluorescence is occurring. The measured lifetimes of each fluorescence are 2.2, 3.3, 0.3, 0.4 ns respectively for 1,2,3, and 4. Radiative and non-radiative rate constants are presented. Compounds 1 and 2 exhibit unusual low-temperature absorption spectra at 77 K in 3-methylpetane matrix. The disappearance of the long-wavelength transition at 650 nm is accompanied by a new transition near 450 nm at 77 K. It is theorized that a ground-state dimer can explain these observations.     

Rhenium(I)-based fluorescence resonance energy transfer probe for conformational changes of bovine serum albumin

Protein binding properties of fac-rhenium(I) complexes with general structure [Re(CO)₃(N-N)L]PF₆, where N-N = 4,4′-dinanoyl-2,2-bipyridine and L = py-3-COOH (1a) and py-3-CONH₂ (1b) with bovine serum albumin (BSA) were investigated at physiological pH (7.4) using UV-visible absorption and fluorescence spectral study, excited state lifetime measurement and circular dichroism (CD). The results observed from fluorescence spectra reveal the energy transfer from BSA to Re(I) complex, and the distance r between donor (BSA) and acceptor (Re(I) complex) is 3.05 nm and 2.16 nm for 1a and 1b respectively according to Forster's non-radiative energy transfer theory. CD results show that the binding of Re(I) complex could induce the conformational change with the loss of α-helicity.     

A simple method for improving the optical properties of a dimetallic coordination fluorescent chemosensor for adenosine triphosphate

The selectivity and sensitivity of [Zn₂(9,10-bis[(2,2-dipicolylamino)methyl]anthracene)]⁴⁺ (1) were enhanced by eliminating its intrinsic fluorescence with the introduction of pyrocatechol violet. An ensemble ([Zn₂(9,10-bis[(2,2-dipicolylamino)methyl]anthracene)(pyrocatechol violet)]²⁺) can easily detect less than 1 μM of ATP and can discriminate between ATP and various other anions including adenosine diphosphate (ADP).     

Synthetic, spectral and catalytic activity studies of ruthenium bipyridine and terpyridine complexes: Implications in the mechanism of the ruthenium(pyridine-2,6-bisoxazoline)(pyridine-2,6-dicarboxylate)-catalyzed asymmetric epoxidation of olefins utilizing H2O2

Various Ru(L₁)(L₂) (1) complexes (L₁ = 2,2′-bipyridines, 2,2′:6′,2″-terpyridines, 6-(4S)-4-phenyl-4,5-dihydro-oxazol-2-yl-2,2′-bipyridinyl or 2,2′-bipyridinyl-6-carboxylate; L₂ = pyridine-2,6-dicarboxylate, pyridine-2-carboxylate or 2,2′-bipyridinyl-6-carboxylate) have been synthesized (or in situ generated) and tested on epoxidation of olefins utilizing 30% aqueous H₂O₂. The complexes containing pyridine-2,6-dicarboxylate show extraordinarily high catalytic activity. Based on the stereoselective performance of chiral ruthenium complexes containing non-racemic 2,2′-bipyridines including 6-[(4S)-4-phenyl-4,5-dihydro-oxazol-2-yl]-[2,2′]bipyridinyl new insights on the reaction intermediates and reaction pathway of the ruthenium-catalyzed enantioselective epoxidation are proposed. In addition, a simplified protocol for epoxidation of olefins using urea hydrogen peroxide complex as oxidizing agent has been developed.     

Chromic and fluorescence response system based on the dihydrophenanthroline-bipyridine skeleton: dynamic redox behavior and metal binding properties

The spiro-acridan/acridinium-based dynamic redox pair (1/2²⁺) transduces the electrochemical input into UV-vis and fluorescence spectra, whereas the 2,2′-bipyridine units in 1 works as a bidentate ligand for metal ions. X-ray structural analyses of this redox pair and the corresponding Zn-complexes [1-ZnI₂/2²⁺-Zn²⁺(OTf⁻)₄] demonstrate drastic structural changes upon electron-transfer, thus metal binding properties are modified by redox reactions.     

Synthesis and crystal structure of maleonitriledithiolate metal complexes with N-methylacridine as cations

The synthesis of [N-MeA]₂[M(mnt)₂] (N-MeA=N-methylacridine; M=Ni (II), Zn (II), Cu (II) and Cd (II); mnt=maleonitriledithiolate) and crystal structure analysis of the Ni (1) and Zn (2) complexes are reported. The conductivities of almost all the complexes under 4 MPa pressure are above 10⁻⁵ S cm⁻¹, which are characteristic of intrinsic semi-conductors. The complexes exhibit charge transfer transitions in both their absorption spectra and fluorescence spectroscopy.     

A screw-shaped alignment of pyrene using m-calix[3]amide

m-Calix[3]amide bearing three pyrenes (1a) was prepared by the condensation reaction of 3-nonylaminobenzoic acid derivative using Ph₃PCl₂. Pyrenyl groups were found to be aligned in the screw-like fashion by m-calix[3]amide as confirmed by the X-ray crystallography. Aromatic proton signals observed at the up-field region in the ¹H NMR spectrum at low temperature indicated that pyrenyl groups in 1a are aligned in close proximity in THF solution. UV–vis absorption and fluorescence emission spectra did not show marked peak shift nor concentration fluorescence quenching compared with reference compounds implying no significant electronic interaction between pyrenyl groups. These results can be explained by the steric effect of the m-calix[3]amide platform. On the other hand, an excimer emission was observed for m-calix[3]amide having a flexible spacer between pyrene and m-calix[3]amide (1b).     

Synthesis,spectral, thermal and BVS investigations on ZnS4N^N/N coordination environment: Single crystal X-ray structures of bis(dibenzyldithiocarbamato)(N^N)Zinc(II) complexes (N^N = 1,10-phenanthroline,tetramethylethylenediamine and 4,4′-bipyridine)

The current paper describes the synthesis and spectral investigations on the adducts of [Zn(dbzdtc)₂] (1) with 1,10-phen (2), tmed (3), 2,2′-bipy (4) and 4,4′-bipy (5) (where, dbzdtc = dibenzyldithiocarbamate anion, 1,10-phen = 1,10-phenanthroline, tmed = tetramethylethylenediamine, 2,2′-bipy = 2,2′-bipyridine, 4,4′-bipy = 4,4′-bipyridne) and single crystal X-ray structures of [Zn(dbzdtc)₂(1,10-phen)] (2) and [Zn(dbzdtc)₂(tmed)] (3) and [Zn(dbzdtc)₂(4,4′-bipy)] (5). ¹H and ¹³C NMR spectra of 1,10-phen, tmed, 2,2′-bipy and 4,4′-bipy adducts were recorded. ¹H NMR spectra of the complexes show the drift of electrons from the nitrogen of the substituents forcing a high electron density towards sulfur via the thioureide π-system. In the ¹³C NMR spectra, the most important thioureide (N¹³CS₂) carbon signals are observed in the region: 206–210 ppm. Fluorescence spectra of complexes (2) and (4) show intense fluorescence due to the presence of rigid conjugate systems such as 1,10-phenanthroline and 2,2′-bipyridine. The observed fluorescence maxima for complexes with an MS₄N₂ chromophore in the visible region are assigned to the metal-to-ligand charge transfer (MLCT) processes. Single crystal X-ray structural analysis of (2) and (3) showed that the zinc atom is in a distorted octahedral environment. Bond Valence Sum was found to be equivalent to 1.865 for (2), 1.681 for (3) supporting the correctness of the determined structure. BVS of (3) deviates from the formal oxidation number of zinc due to the non-aromatic, sterically hindering tetramethyl bonding end of tmed. Thermal studies on the compounds show the formation of Zn(NCS)₂ as an intermediate during the decay.     

Synthesis and resolution of 2,2′-bis[di(p-tolyl)stibano]-1,1′-binaphthyl (BINASb); the first example of an optically active organoantimony ligand for asymmetric synthesis

Racemic 2,2′-bis[di(p-tolyl)stibano]-1,1′-binaphthyl (BINASb) (±)-2 has been prepared from 2,2′-dibromo-1,1′-binaphthyl 1 via 2,2′-dilithio-1,1′-binaphthyl intermediate, and has been resolved via the separation of a mixture of the diastereomeric Pd complexes 4A and 4B, derived from the reaction of (±)-2 with di-μ-chlorobis{(S)-2-[1-(dimethylamino)ethyl]phenyl-C,N}dipalladium(II) 3. The optically active BINASbs (S)-(+)-2 and (R)-(−)-2 have been shown to be effective chiral ligands for the rhodium-catalyzed asymmetric hydrosilylation of ketones.     

DFT study of the electronic and charge transfer properties of perfluoroarene–thiophene oligomers

The ground state structures of 5,5″-diperfluorophenyl-2,2′:5′,2″:5″,2‴-quaterthiophene (1), 5,5′-bis{1-[4-(thien-2-yl)perfluorophenyl]}-2,2′-dithiophene (2), 4,4′-bis[5-(2,2′-dithiophenyl)]-perfluorobiphenyl (3), 5,5″-diperfluorophenyl-2,2′:5′,2″-tertthiophene (4), 5,5′-diperfluorophenyl-2,2′-dihiophene (5), and 5,5-diperfluorophenylthiophene (6) have been optimized at the B3LYP/6-31G(d), B3LYP/6-31G(d,p), PBE0/6-31G(d), and PBE0/6-31G(d,p) level of theories. The B3LYP/6-31+G(d) and PBE0/6-31+G(d) level of theories have been applied to investigate the absorption spectra. The PBE0 functional is good to predict the C–S bond lengths while the C–F bond lengths are good envisaged with B3LYP functional. The increment of thiophene rings between two perfluoroarene rings leads to red shift in absorption spectra. The electron affinities are energetically destabilized while energetic stabilization of the radical-cation increases by decreasing the thiophene rings from four to one. The perfluoroarene rings leads to enhance the electron injection.     

Mono and bimetallic nickel bromide complexes bearing azolate-imine ligands: Synthesis, structural characterization and ethylene polymerization studies

The synthesis of N-(1-(3,5-dimethylpyrazol-1-yl)ethylidene)-2,6-diisopropylaniline (1) and N-(1-(indazol-2-yl)ethylidene)-2,6-diisopropylaniline (2) allowed access to new transition metal complexes. When reacted with dibromo(2,2′-dimethoxyethylether)nickel(II) the complexes [NiBr₂{N-(1-(3,5-dimethylpyrazol-1-yl)ethylidene)-2,6-diisopropylaniline}] (3) and [Ni₂Br₂(μ-Br)₂{N-(1-(indazol-1-yl)ethylidene)-2,6-diisopropylaniline}₂] (4) are yielded, respectively. The addition of MAO generates catalytically active species for the homopolymerization of ethylene. The polymer products were low molecular weight (3-6 K) and a monomodal molecular weight distribution, consistent with the presence of a single active site. In addition, the catalyst was found to efficiently oligomerize higher olefins to high molecular weights with narrow PDIs.