Adsorption of the fusogenic peptide B18 onto solid surfaces: insights into the mechanism of peptide assembly

The adsorption and assembly of B18 peptide on various solid surfaces were studied by reflectometry techniques and atomic force microscopy. B18 is the minimal membrane binding and fusogenic motif of the sea urchin protein bindin, which mediates the fertilization process. Silicon substrates were modified to obtain hydrophilic charged surfaces (oxide layer and polyelectrolyte multilayers) and hydrophobic surfaces (octadecyltrichlorosilane). B18 does not adsorb on hydrophilic positively charged surfaces, which was attributed to electrostatic repulsion since the peptide is positively charged. In contrast, the peptide irreversibly adsorbs on negatively charged hydrophilic as well as on hydrophobic surfaces. B18 showed higher affinity for hydrophobic surfaces than for hydrophilic negatively charged surfaces, which must be due to the presence of hydrophobic side chains at both ends of the molecule. Atomic force microscopy provided the indication that lateral diffusion on the surface affects the adsorption process of B18 on hydrophobic surfaces. The adsorption of the peptide on negatively charged surfaces was characterized by the formation of globular clusters.     

Adsorption of amyloid beta-peptide at polymer surfaces: a neutron reflectivity study.

The adsorption of amyloid beta-peptide at hydrophilic and hydrophobic modified silicon-liquid interfaces was characterized by neutron reflectometry. Distinct polymeric films were used to obtain noncharged (Formvar), negatively (sodium poly(styrene sulfonate)) and positively charged (poly(allylamine hydrochloride)) hydrophilic as well as hydrophobic surfaces (polystyrene and a polysiloxane-dodecanoic acid complex). Amyloid beta-peptide was found to adsorb at positively charged hydrophilic and hydrophobic surfaces, whereas no adsorbed layer was detected on hydrophilic noncharged and negatively charged films. The peptide adsorbed at the positively charged film as patches, which were dispersed on the surface, whereas a uniform layer was observed at hydrophobic surfaces. The thickness of the adsorbed peptide layer was estimated to be approximately 20 A. The peptide formed a tightly packed layer, which did not contain water. These studies provide information about the affinity of the amyloid beta-peptide to different substrates in aqueous solution and suggest that the amyloid fibril formation may be driven by interactions with surfaces.     

Formation of calcite thin films by cooperation of polyacrylic acid and self-generating electric field due to aligned dipoles of polarized substrates

We demonstrated the formation of calcite thin films on positively and negatively charged surfaces of a hydroxyapatite (HAp) electret coexisting with polyacrylic acid (PAA) and self-generating surface electric fields due to HAp electrets with electrically aligned dipoles. The cooperation of PAA and the self-generating surface electric field due to the electrets favored the formation of calcite thin films and acted remarkably on the negatively charged surface. Calcite thin films, 4–10 μm thick, with a shell-like microstructure were produced on the negatively charged surfaces with a small amount of PAA. In contrast, under other reaction conditions, calcite thin films with a fan-like structure in the cross section formed on the polarized substrates, and their thickness ranged from 2 to 7 μm. The films were composed of hemispheric- or flat island-shaped aggregates that were made of the calcite crystals that elongated along the c-axis. The morphology of the PAA–Ca²⁺ complex assembly, which adsorbed onto the polarized HAp substrates, was controlled by the balance of the spatial charge distribution in its structure and the properties of the self-generating surface electric field, which led to the different morphologies of the calcite thin films. We proposed that the formation mechanism of the films formed coexisting with PAA and the self-generating electric fields.     

A universal approach to fabricate ordered colloidal crystals arrays based on electrostatic self-assembly

We present a novel and simple method to fabricate two-dimensional (2D) poly(styrene sulfate) (PSS, negatively charged) colloidal crystals on a positively charged substrate. Our strategy contains two separate steps: one is the three-dimensional (3D) assembly of PSS particles in ethanol, and the other is electrostatic adsorption in water. First, 3D assembly in ethanol phase eliminates electrostatic attractions between colloids and the substrate. As a result, high-quality colloidal crystals are easily generated, for electrostatic attractions are unfavorable for the movement of colloidal particles during convective self-assembly. Subsequently, top layers of colloidal spheres are washed away in the water phase, whereas well-packed PSS colloids that are in contact with the substrate are tightly linked due to electrostatic interactions, resulting in the formation of ordered arrays of 2D colloidal spheres. Cycling these processes leads to the layer-by-layer assembly of 3D colloidal crystals with controllable layers. In addition, this strategy can be extended to the fabrication of patterned 2D colloidal crystals on patterned polyelectrolyte surfaces, not only on planar substrates but also on nonplanar substrates. This straightforward method may open up new possibilities for practical use of colloidal crystals of excellent quality, various patterns, and controllable fashions.     

Alpha-helix-inducing dimerization of synthetic polypeptide scaffolds on gold

Designed, synthetic polypeptides that assemble into four-helix bundles upon dimerization in solution were studied with respect to folding on planar gold surfaces. A model system with controllable dimerization properties was employed, consisting of negatively and positively charged peptides. Circular dichroism spectroscopy and surface plasmon resonance based measurements showed that at neutral pH, the peptides were able to form heterodimers in solution, but unfavorable electrostatic interactions prevented the formation of homodimers. The dimerization propensity was found to be both pH- and buffer-dependent. A series of infrared absorption-reflection spectroscopy experiments of the polypeptides attached to planar gold surfaces revealed that if the negatively charged peptide was immobilized from a loading solution where it was folded, its structure was retained on the surface provided it had a cysteine residue available for anchoring to gold. If it was immobilized as random coil, it remained unstructured on the surface but was able to fold through heterodimerization if subsequently exposed to a positively charged polypeptide. When the positively charged peptide was immobilized as random coil, heterodimerization could not be induced, probably because of high-affinity interactions between the charged primary amine groups and the gold surface. These observations are intended to pave the way for future engineering of functional surfaces based on polypeptide scaffolds where folding is known to be crucial for function.     

Mucin-chitosan complexes at the solid-liquid interface: multilayer formation and stability in surfactant solutions

The adsorption of a biologically important glycoprotein, mucin, and mucin-chitosan complex layer formation on negatively charged surfaces, silica and mica, have been investigated employing ellipsometry, the interferometric surface apparatus, and atomic force microscopy techniques. Particular attention has been paid to the effect of an anionic surfactant sodium, dodecyl sulfate (SDS), with respect to the stability of the adsorption layers. It has been shown that mucin adsorbs on negatively charged surfaces to form highly hydrated layers. Such mucin layers readily associate with surfactants and are easily removed from the surfaces by rinsing with solutions of SDS at concentrations > or =0.2 cmc (1 cmc SDS in 30 mM NaCl is equal to 3.3 mM). The mucin adsorption layer is negatively charged, and we show how a positively charged polyelectrolyte, chitosan, associates with the preadsorbed mucin to form mucin-chitosan complexes that resist desorption by SDS even at SDS concentrations as high as 1 cmc. Thus, a method of mucin layer protection against removal by surfactants is offered. Further, we show how mucin-chitosan multilayers can be formed.     

Preparation of positively charged oil/water nano-emulsions with a sub-PIT method

The phase inversion temperature (PIT) method is generally used to prepare nonionic surfactant stabilized nano-emulsions because of its low energy and surfactant consumption. The emulsion droplets are usually negatively charged because of the selective adsorption of OH(-) onto the droplet surfaces. In this work, positively charged oil/water nano-emulsions were prepared by adding a cationic surfactant to the system. The cationic molecules change the spontaneous curvature of the surfactant layers and raise the PIT above 100 °C. The PIT can be depressed by addition of NaBr, as shown by conductivity measurements and equilibrium phase behavior. Therefore, these nano-emulsions can be prepared by the PIT method. We found that the formation of the nano-emulsions did not require a cross-PIT cycle. The mechanism of the emulsification is the formation of mixed swollen micelles that can solubilize all the oil above a "clearing boundary", followed by a stir-quench to a temperature where these droplets become metastable emulsions. The zeta potential of the emulsion droplets can be easily tuned by varying the cationic surfactant concentrations. Due to electrosteric stabilization, the resulting nano-emulsions are highly stable, thus could find significant applications in areas such as pharmaceuticals, cosmetics and food industries.     

分子动力学模拟多巴在自组装膜上的黏附性

为了更好地理解贻贝在表面的黏附机理,实现水下胶黏,采用分子动力学方法研究了多巴在自组装膜上的黏附性:采用伞形取样和加权柱状图分析方法计算了多巴在不同自组装膜表面的黏附自由能,使用拉伸分子动力学模拟研究了多巴在不同自组装膜表面上黏附后的脱附力.结果表明,多巴在带负电的羧基自组装膜上的黏附能比在带正电的氨基自组装膜上的大,多巴更容易黏附到带负电表面;多巴在带电表面的黏附能比未带电表面的黏附能更强,表明在带电表面黏附更稳定.进一步分析了多巴在不同表面的取向分布,发现多巴与不同表面相互作用的方式不同:与疏水表面主要通过苯环相互作用;与亲水表面主要通过羟基相互作用;与负电表面主要通过氨基相互作用;与正电表面主要通过羧基相互作用.通过模拟比较了多巴在不同自组装膜上的脱附力,发现多巴在带电表面的脱附力比在未带电表面的大,与黏附能的趋势一致.对比4种非带电表面的脱附力,发现多巴在疏水性甲基自组装膜表面的脱附力最大,黏附更稳定,随着表面疏水性的增加,脱附力增大,黏附稳定性增强.本工作可为研发新型水下胶黏剂提供理论指导.     

Electrochemical attachment of motile bacterial cells to gold

Selective attachment of Escherichia coli K-12 bacterial cells to charged gold surfaces was demonstrated. Electrostatic binding of E. coli K-12 bacterial cells to positively charged surfaces was observed starting at +750 mV. The binding of E. coli K-12 cells to positively charged gold surfaces is proposed to occur due to long-range electrostatic interactions between the negatively charged O-chain of lipopolysaccharide (LPS) molecules protruding the bacterial cell body and the electrode surface. Removing LPS alters the cellular surface charge and results in cellular attachment to negatively charged surfaces. Thus, applying an electrical potential allows for the direct, real time detection of live, dead or damaged bacterial cells. The attachment of E. coli K-12 bacterial cells to surfaces with an applied potential substantiates the hypothesis that an electrostatic interaction is responsible for the binding of bacterial cells to positively charged molecular assemblies on surfaces used for building bacterial microarrays.     

Chaotrope vs. kosmotrope: which one has lower friction?

We examine the frictional properties of zwitterionic surfaces and explore whether chaotropic or kosmotropic charged groups are preferred to achieve lower friction. Self-assembled monolayers of carboxybetaine (CB-SAMs) and sulfurbetaine (SB-SAMs) are used as model surfaces as they contain the same positively charged group, but different negatively charged ones. The negatively charged groups are kosmotropic carboxylates in the CB-SAM surfaces and chaotropic sulfonate groups in the SB-SAM surfaces, respectively. The results show that the friction of the SB-SAM surfaces is even lower than that of the CB-SAM surfaces although both surfaces have low friction. This suggests that chaotropic charged groups are better in reducing friction than kosmotropic groups. The lower friction of the SB-SAM surfaces over the CB-SAM can be explained by the higher mobility of water near the SB-SAM surfaces, as shown in the survival autocorrelation function and the dipole autocorrelation function of hydration water molecules.     

In situ AFM study of amelogenin assembly and disassembly dynamics on charged surfaces provides insights on matrix protein self-assembly

Because self-assembly of matrix proteins is a key step in hard tissue mineralization, developing an understanding of the assembly pathways and underlying mechanisms is likely to be important for successful hard tissue engineering. While many studies of matrix protein assembly have been performed on bulk solutions, in vivo these proteins are likely to be in contact with charged biological surfaces composed of lipids, proteins, or minerals. Here we report the results of an in situ atomic force microscopy (AFM) study of self-assembly by amelogenin--the principal protein of the extracellular matrix in developing enamel--in contact with two different charged substrates: hydrophilic negatively charged bare mica and positively charged 3-aminopropyl triethoxysilane (APS) silanized mica. First we demonstrate an AFM-based protocol for determining the size of both amelogenin monomers and oligomers. Using this protocol, we find that, although amelogenin exists primarily as ~26 nm in diameter nanospheres in bulk solution at a pH of 8.0 studied by dynamic light scattering, it behaves dramatically differently upon interacting with charged substrates at the same pH and exhibits complex substrate-dependent assembly pathways and dynamics. On positively charged APS-treated mica surfaces, amelogenin forms a relatively uniform population of decameric oligomers, which then transform into two main populations: higher-order assemblies of oligomers and amelogenin monomers, while on negatively charged bare mica surfaces, it forms a film of monomers that exhibits tip-induced desorption and patterning. The present study represents a successful attempt to identify the size of amelogenin oligomers and to directly monitor assembly and disassembly dynamics on surfaces. The findings have implications for amelogenin-controlled calcium phosphate mineralization in vitro and may offer new insights into in vivo self-assembly of matrix proteins as well as their control over hard tissue formation.     

Surface‐Tuned Electron Transfer and Electrocatalysis of Hexameric Tyrosine‐Coordinated Heme Protein

Molecular modeling, electrochemical methods, and quartz crystal microbalance were used to characterize immobilized hexameric tyrosine‐coordinated heme protein (HTHP) on bare carbon or on gold electrodes modified with positively and negatively charged self‐assembled monolayers (SAMs), respectively. HTHP binds to the positively charged surface but no direct electron transfer (DET) is found due to the long distance of the active sites from the electrode surfaces. At carboxyl‐terminated surfaces, the neutrally charged bottom of HTHP can bind to the SAM. For this “disc” orientation all six hemes are close to the electrode and their direct electron transfer should be efficient. HTHP on all negatively charged SAMs showed a quasi‐reversible redox behavior with rate constant k_s values between 0.93 and 2.86 s^?1 and apparent formal potentials ${E{{0{^{\prime }}\hfill \atop {\rm app}\hfill}}}$ between ‐131.1 and ‐249.1 mV. On the MUA/MU‐modified electrode, the maximum surface concentration corresponds to a complete monolayer of the hexameric HTHP in the disc orientation. HTHP electrostatically immobilized on negatively charged SAMs shows electrocatalysis of peroxide reduction and enzymatic oxidation of NADH.     

Preparation of a biodegradable matrix through polyion complex formation by mixing polylactide-based microspheres having oppositely charged surfaces

The aggregation of polyions into microsphere (MS) complexes was studied as a preparative method for the construction of a biodegradable matrix. Aqueous suspensions of polylactide (PLA)-based MSs with positively and negatively charged surfaces, MS(K(3)(4+)-PLA) and MS(E(3)(4-)-PLA), respectively, immediately formed aggregates when mixed. The effects of the stoichiometry of the charged groups on the surfaces of the MSs and the ionic strength of the medium on aggregate formation, as well as the degradation behavior of the polyion complex (PIC) matrix over time, were investigated.     

Electrostatic orientation of enzymes on surfaces for ligand screening probed by force spectroscopy

In this letter, we show that electrostatic immobilization provides a simple but effective approach for the immobilization and orientation of carbonic anhydrase onto charged surfaces. The enzyme is oriented differently on oppositely charged surfaces, with the majority of active sites facing upward on a positively charged surface and downward on a negatively charged surface. An array of negatively charged microscale surface patterns within a positively charged background was prepared by microcontact printing and used as the substrate to immobilize the enzymes. This enabled the probing of the enzyme orientations on the two differently charged surface regions by force spectroscopy with the same atomic force microscopy (AFM) probe modified with a thiolated sulfonamide inhibitor. The unbinding forces between the inhibitor tip and the enzyme immobilized on the two differently charged surfaces were measured. Two control experiments, blocking of the enzyme active site with a competitive inhibitor and removal of the zinc ion from the enzyme catalytic center, were employed to distinguish between specific and nonspecific interactions and to further verify the differences in enzyme orientation. Autocorrelation analysis of the force histograms was carried out to evaluate the specific single enzyme-inhibitor interaction force.     

Formation of polyelectrolyte multilayer architectures with embedded DMPC studied in situ by neutron reflectometry

The coupling of lipid molecules to polymer components in a planar biomimetic model membrane made of a lipid bilayer (dimyristoylphosphatidylcholine) supported by polyelectrolyte multilayers is studied. The polyelectrolyte support was prepared by layer-by-layer deposition of positively charged poly(allylamine hydrochloride) (PAH) and negatively charged poly(sodium 4-styrenesulfonate) (PSS). Two polymer sample terminations were considered: positively charged (PAH-terminated) and negatively charged (PSS-terminated). Neutron reflectometry studies showed that, whereas positively charged samples did not favor the deposition of lipid, negatively charged samples allowed the deposition of a lipid bilayer with a thickness of approximately 5 nm. In the latter case, formation of polyelectrolyte layers after the deposition of the lipid layer was also possible.     

Interaction between charged soft microcapsules and red blood cells: effects of PEGylation of microcapsule membranes upon their surface properties

Four types of hydrophilic gel microcapsules containing water have been prepared by an interfacial polymerization method. Each type of microcapsules has a membrane of different composition. Using three kinds of monomers, N,N-dimethylacrylamide (DMAAm), 4-(aminomethyl)styrene (AmSt), and N,N-dimethylaminopropylacrylamide (DMAPAA), one type of aqueous copolymer having primary and tertiary amino groups was obtained. By the polymerization of three kinds of monomers, DMAAm, AmSt, and 2-[(methacryloyloxy)ethyl] trimethylammoniumchloride (METAC), another type of aqueous copolymer having primary and quaternary ammonium groups was also obtained. Two more types of copolymers were synthesized by copolymerization of -acryloxy-ω-methoxy-poly(ethylene glycol) (a-PEG) with the above two kinds of monomer mixture. These copolymers were polymerized with terephthaloyldichloride at the water/oil interface to prepare four types of microcapsules containing water, i.e., poly(DMAAm-co-DMAPAA-co-AmSt-alt-terephthalic acid) microcapsules, poly(DMAAm-co-DMAPAA-co-AmSt-co-PEG-alt-terephthalic acid) microcapsules, poly (DMAAm-co-METAC-co-AmSt-alt-terephthalic acid) microcapsules, and poly (DMAAm-co-METAC-co-AmSt-co-PEG-alt-terephthalic acid) microcapsules, which will be abbreviated to MC 1, MC 2, MC 3, and MC 4, respectively. It has been predicted that the microcapsule membranes are hydrophilic and soft and have two-sublayer structures from electrophoretic mobility measurements and from the analysis of the data with Ohshima’s electrokinetic theory for soft particles. The outer sublayers of MC 1 and MC 2 are negatively charged and those of MC 3 and 4 are slightly positively charged. Also, the surfaces of MC 1 and MC 2 are harder than those of MC 3 and 4. By PEGylation, the surface charge density in the membranes decreases and the surface becomes softer. It has been found that the membrane of red blood cells (RBC) is also soft and is composed of two-sublayers, the outer sublayer of which is negatively charged and the inner one is positively charged. The interaction of four types of microcapsules with RBC has been studied. It was found that microcapsules with soft surfaces (MC 3 and MC 4) do not interact with RBC, even though the microcapsule surfaces are positively charged and the surface of RBC is negatively charged. On the other hand, microcapsules with negatively charged but harder surfaces (MC 1) interact with RBC to introduce hemolysis. The membrane surface of MC 2, which is obtained by PEGylation of MC 1, becomes softer than that of MC 1 so that the interaction with RBC was weakly suppressed. From these, it was concluded that the dominant factor to control the interaction between synthetic polymer surfaces and biological cell surfaces is not the surface charges carried by the polymer surfaces but the softness of the polymer surfaces.     

Activity of an enzyme immobilized on polyelectrolyte multilayers

The immobilization of α-chymotrypsin on the surface of boron silicate glass microspheres is conducted via the technique of multilayer adsorption of polyelectrolytes. It is shown that the enzyme is adsorbed on both positively and negatively charged surfaces and its activity is partially preserved relative to that in solution. The activity of the enzyme depends on the number of polyectrolyte layers preliminarily adsorbed on glass microspheres and on the charge of the surface. The activity of α-chymotrypsin adsorbed on the negatively charged surface is four times higher than the activity of this enzyme adsorbed on a positively charged surface.     

Monte Carlo simulations of antibody adsorption and orientation on charged surfaces

Monte Carlo simulations were performed to study the adsorption and orientation of antibodies on charged surfaces based on both colloidal and all-atom models. The colloidal model antibody consists of 12 connected beads representing the 12 domains of an antibody molecule. The structure of the all-atom antibody model was taken from the protein databank. The effects of the surface charge sign and density, the solution pH and ionic strength on the adsorption and orientation of different colloidal model antibodies with different dipole moments were examined. Simulation results show that both the 12-bead and the all-atom models of the antibody, for which the dipole moment points from the Fc to (Fab)2 fragments, tend to have the desired "end-on" orientation on positively charged surfaces and undesired "head-on" orientation on negatively charged surfaces at high surface charge density and low solution ionic strength where electrostatic interactions dominate. At low surface charge density and high solution ionic strength where van der Waals interactions dominate, 12-bead model antibodies tend to have "lying-flat" orientation on surfaces. The orientation of adsorbed antibodies results from the compromise between electrostatic and van der Waals interactions. The dipole moment of an antibody is an important factor for antibody orientation on charged surfaces when electrostatic interactions dominate. This charge-driven protein orientation hypothesis was verified by our simulations results in this work. It was further confirmed by surface plasmon resonance biosensor and time-of-flight secondary ion mass spectrometry experiments reported elsewhere.     

Polymer-induced fractal patterns of [60]fullerene containing poly(methacrylic acid) in salt solutions

Well-defined water-soluble pH-responsive [60]fullerene (C60) containing poly(methacrylic acid) (PMAA-b-C60) was synthesized using the atom transfer radical polymerization technique. By varying pH and salt concentration, different types of fractal patterns at nano- to microscopic dimensions were observed for negatively charged PMAA-b-C60, while such structure was not observed for positively charged poly(2-dimethylaminoethyl methacrylate)-b-C60. We demonstrated that negatively charged fullerene containing polymeric systems can serve as excellent nanotemplates for the controlled growth of inorganic crystals at the nano- to micrometer length scale, and the possible mechanism was proposed.     

Selective adsorption of protein molecules on phase-separated sapphire surfaces

Site-selective adsorption of protein molecules was found on sapphire surfaces that exhibit a phase separation into two domains: weakly charged hydrophobic domain and negatively charged hydrophilic one. Ferritin and bovine serum albumin molecules, which are negatively charged in a buffer solution, are adsorbed to the hydrophobic domains. Avidin molecules, which are positively charged, are adsorbed to the other domain. Fibrinogen molecules, which consist of both negative and positive modules, are adsorbed to the whole sapphire surface. Hemoglobin molecules, whose net charge is almost zero, are also adsorbed to the whole surfaces. These results indicate that electrostatic double layer interaction is the primary origin of the observed selectivity. Dependence of protein adsorption or desorption behaviors on the pH value can also be interpreted by the proposed model.