Deprotonation induced ligand-to-metal electron transfer: synthesis of a mixed-valence Rh(-I,I) dinuclear compound and its reaction with dioxygen

Treatment of bis(2-picolyl)amine (bpa) with [{Rh(nbd)(mu-OMe)}2] leads to the unexpected and unique redox asymmetric dinuclear Rh-I,Rh+I complex [{Rh(nbd)}2(bpa-2H)] (2) with a pi-coordinating imine bound to a tetrahedral low valent rhodate(-I). Mono-oxygenation of the deprotonated bpa ligand in 2 by O2 leads to the mononuclear carboxamido complex [Rh(nbd)(bpam-H)] (3) (bpam = N-(2-picolyl)picolinamide). The second O atom of O2 ends up as a hydroxo fragment in [{Rh(nbd)(mu-OH)}2].     

Dirhodium tetracarboxylate scaffolds as reversible fluorescence-based nitric oxide sensors

We report the synthesis and characterization of dirhodium tetracarboxylate complexes [Rh(2)(mu-O(2)CR)(4)(L)(2)], with R = Me and L = dansyl-imidazole (Ds-im) or dansyl-piperazine (Ds-pip). The fluorophores coordinate to the axial sites of the dirhodium core through the imidazole or piperazine N-atom and emit only weakly when excited at 365 or 345 nm for the Ds-im and Ds-pip complexes, respectively. These fluorophore-containing complexes were investigated for their ability to elicit a fluorescence response in the presence of NO. An immediate increase in fluorescence emission of greater than 15-fold occurs when NO is admitted to solutions containing [Rh(2)(mu-O(2)CMe)(4)] and Ds-pip or Ds-im. In both systems, the fluorescence response, which arises by NO-induced displacement of the axially coordinated fluorophore, is reversible with a sensitivity of approximately 4 microM. The related dinitrosyl complexes [Rh(2)(mu-O(2)CR)(4)(NO)(2)], where R = Me, Et, or n-Pr, were prepared, structurally characterized, and found to be air-stable, losing NO upon standing in solution. Sequestration of a methylene chloride solution of the Ds-pip complex from aqueous media by a NO-permeable membrane allows for fluorescence detection of NO for potential applications in biological fluids.     

Binding of DNA purine sites to dirhodium compounds probed by mass spectrometry

The adducts formed between the antitumor active compounds [Rh(2)(O(2)CCH(3))(2)(CH(3)CN)(6)](BF(4))(2), Rh(2)(O(2)CCH(3))(4), and Rh(2)(O(2)CCF(3))(4) with DNA oligonucleotides have been assessed by matrix-assisted laser desorption ionization (MALDI) and nanoelectrospray (nanoESI) coupled to time-of-flight mass spectrometry (TOF MS). A series of MALDI studies performed on dipurine (AA, AG, GA, and GG)-containing single-stranded oligonucleotides of different lengths (tetra- to dodecamers) led to the establishment of the relative reactivity cis-[Pt(NH(3))(2)(OH(2))(2)](2+) (activated cisplatin) approximately Rh(2)(O(2)CCF(3))(4) > cis-[Pt(NH(3))(2)Cl(2)] (cisplatin) > [Rh(2)(O(2)CCH(3))(2)(CH(3)CN)(6)](BF(4))(2) > Rh(2)(O(2)CCH(3))(4) approximately Pt(C(6)H(6)O(4))(NH(3))(2) (carboplatin). The relative reactivity of the complexes is associated with the lability of the leaving groups. The general trend is that an increase in the length of the oligonucleotide leads to enhanced reactivity for Rh(2)(O(2)CCH(3))(2)(CH(3)CN)(6)](BF(4))(2) and Rh(2)(O(2)CCH(3))(4) (except for the case of [Rh(2)(O(2)CCH(3))(2)(CH(3)CN)(6)](2+), which reacts faster with the GG octamers than with the dodecamers), whereas the reactivity of Rh(2)(O(2)CCF(3))(4) is independent of the oligonucleotide length. When monitored by ESI, the dodecamers containing GG react faster than the respectiveAA oligonucleotides in reactions with Rh(2)(O(2)CCF(3))(4) and Rh(2)(O(2)CCH(3))(2)(CH(3)CN)(6)](BF(4))(2), whereas AA oligonucleotides react faster with Rh(2)(O(2)CCH(3))(4). The mixed (AG, GA) purine sequences exhibit comparable rates of reactivity with the homopurine (AA, GG) dodecamers in reactions with Rh(2)(O(2)CCH(3))(4). The observation of initial dirhodium-DNA adducts with weak axial (ax) interactions, followed by rearrangement to more stable equatorial (eq) adducts, was achieved by electrospray ionization; the Rh-Rh bond as well as coordinated acetate or acetonitrile ligands remain intact in these dirhodium-DNA adducts. MALDI in-source decay (ISD), collision-induced dissociation (CID) MS-MS, and enzymatic digestion studies followed by MALDI and ESI MS reveal that, in the dirhodium compounds studied, the purine sites of the DNA oligonucleotides interact with the dirhodium core. Ultimately, both MALDI and ESI MS proved to be complementary, valuable tools for probing the identity and stability of dinuclear metal-DNA adducts.     

New dinuclear catalysts Rh(2)(N-O)(2)[(C6H4)P(C6H5)2]2 with imidate ligands: synthesis and isomerization from head-to-tail to head-to-head configuration of the imidate ligands

Two new dirhodium(II) catalysts of general formula Rh(2)(N-O)(2)[(C(6)H(4))P(C(6)H(5))(2)](2) (N-O = C(4)H(4)NO(2)) are prepared, starting from Rh(2)(O(2)CCH(3))(2)(PC)(2)L(2) [PC = (C(6)H(4))P(C(6)H(5))(2) (head-to-tail arrangement); L = HO(2)CCH(3)]. The thermal reaction of Rh(2)(O(2)CCH(3))(2)(PC)(2).L(2) with the neutral succinimide stereoselectively gives one compound that according to the X-ray structure determination has the formula Rh(2)(C(4)H(4)NO(2))(2)[(C(6)H(4))P(C(6)H(5))(2)](2) (1). It corresponds to the polar isomer with two bridging imidate ligands in a head-to-head configuration. However, stepwise reaction of Rh(2)(O(2)CCH(3))(2)(PC)(2).L(2) with (CH(3))(3)SiCl and potassium succinimidate yields a mixture of 1 and one of the two possible isomers (structure B) with a head-to-tail configuration of the imidate ligands, Rh(2)(C(4)H(4)NO(2))(2)[(C(6)H(4))P(C(6)H(5))(2)](2) (2), also characterized by X-ray methods. In solution, compound 2 undergoes slow isomerization to 1; the rate of this process is enhanced by the presence of acetonitrile. Compounds 1 and 2 are obtained as pure enantiomers starting from (M)- and (P)-Rh(2)(O(2)CCH(3))(2)(PC)(2).L(2) rather than from the racemic mixture. Their enantioselectivities in cyclopropanation of 1-diazo-5-penten-2-one are similar to those reported for the dirhodium amidate catalysts.     

Insight into the photoinduced ligand exchange reaction pathway of cis-[Rh2(μ-O2CCH3)2(CH3CN)6]2+ with a DNA model chelate

We previously showed that [Rh(2)(O(2)CCH(3))(2)(CH(3)CN)(6)](2+) binds to dsDNA only upon irradiation with visible light and that photolysis results in a 34-fold enhancement of its cytotoxicity toward Hs-27 human skin fibroblasts, making it potentially useful for photodynamic therapy (PDT). With the goal of gaining further insight on the photoinduced binding of DNA to the complex, we investigated by NMR spectroscopy the mechanism by which 2,2'-bipyridine (bpy), a model for biologically relevant bidentate nitrogen donor ligands, binds to [Rh(2)(O(2)CCH(3))(2)(CH(3)CN)(6)](2+) upon irradiation in D(2)O. The photochemical results are compared to the reactivity in the dark in D(2)O and CD(3)CN. The photolysis of [Rh(2)(O(2)CCH(3))(2)(CH(3)CN)(6)](2+) with equimolar bpy solutions in D(2)O with visible light affords [Rh(2)(O(2)CCH(3))(2)(eq/eq-bpy)(CH(3)CN)(2)(D(2)O(ax))(2)](2+) (eq/eq) with the reaction reaching completion in ~8 h. Only vestiges of eq/eq are observed at the same time in the dark, however, and the reaction is ~20 times slower. Conversely, the dark reaction of [Rh(2)(O(2)CCH(3))(2)(CH(3)CN)(6)](2+) with an equimolar amount of bpy in CD(3)CN affords [Rh(2)(O(2)CCH(3))(2)(η(1)-bpy(ax))(CH(3)CN)(5)](2+) (η(1)-bpy(ax)), which remains present even after 5 days of reaction. The photolysis results in D(2)O are consistent with the exchange of one equiv CH(3)CNeq for solvent, and the resulting species quickly reacting with bpy to generate eq/eq; the initial eq ligand dissociation is assisted by absorption of a photon, thus greatly enhancing the reaction rate. The photolytic reaction of [Rh(2)(O(2)CCH(3))(2)(CH(3)CN)(6)](2+):bpy in a 1:2 ratio in D(2)O affords the eq/eq and (eq/eq)(2) adducts. The observed differences in the reactivity in D(2)O vs CD(3)CN are explained by the relative ease of substitution of eq D(2)O vs CD(3)CN by the incoming bpy molecule. These results clearly highlight the importance of dissociation of an eq CH(3)CN molecule from the dirhodium core to attain high reactivity and underscore the importance of light for the reactivity of these compounds, which is essential for PDT agents.     

Syntheses, structures, and properties of tetrakis(mu-acetato)dirhodium(II) complexes with axial pyridine nitrogen donor ligands with or without assistance of hydrogen bonds

Eight adducts of Rh2(O2CCH3)4 with axial pyridine derivatives that contain hydrogen-bonding amino and/or steric methyl substituents in the 2- and 6-positions have been prepared and examined by electronic absorption and 1H NMR spectroscopy in solution and by elemental, IR, thermogravimetric, and X-ray diffraction analyses in the solid state. The results indicated that strong hydrogen bonding interactions between Rh2(O2CCH3)4 and axially coordinated pyridine derivatives with a 2- or 6-amino group occur in both solution and the solid state and contribute to the higher thermal stability of the molecular assembly of dirhodium complexes. It was demonstrated that such a combination of coordinate and hydrogen bonds is useful as a building tool in designing and constructing new organic-inorganic hybridized compounds and supramolecular architectures.     

A diamondoid network of tetrakis(acetamidato)dirhodium in mixed oxidation states linked by mu4-iodide having a 10(5) enhancement of its electrical conductivity by water molecules of hydration

A mixed oxidation-state (Rh24+ and Rh25+) compound, [{Rh2(acam)4}2I]n.6nH2O (Hacam = acetamide), has been synthesized. The compound has a nonpenetrating diamondoid arrangement of {Rh2(acam)4} units linked by mu4-iodides. All of the dirhodium units are crystallographically equivalent, as are all of the iodide atoms. The magnetic susceptibility of this compound shows that one-half of the Rh2 units are in the Rh25+ oxidation state with one odd electron and the other half in the closed-shell Rh24+ state. Its electrical conductivity is 1.4 x 10-3 S cm-1 (pellets, room temperature) and oscillates over the range of 105 orders of magnitude during dehydration-rehydration cycles of interstitial water molecules.     

Dimerization of mono-ruthenium substituted alpha-Keggin-type tungstosilicate [alpha-SiW11O39RuIII(H2O)]5- to micro-oxo-bridged dimer in aqueous solution: synthesis, structure, and redox studies

We report the dimerization of a mono-ruthenium(III) substituted alpha-Keggin-type tungstosilicate [alpha-SiW(11)O(39)Ru(III)(H2O)](5-) to a micro-oxo-bridged dimer [{alpha-SiW(11)O(39)Ru(m)}2O](n-) (m = III, n = 12; m = IV/III, n = 11; m = IV, n = 10). Single crystal X-ray structure analysis of Rb(10)[{alpha-SiW(11)O(39)Ru(IV)}2O].9.5H2O (triclinic, P1, with a = 12.7650(6) A, b = 18.9399(10) A, c = 20.2290(10) A, alpha = 72.876(3) degrees, beta = 88.447(3) degrees, gamma = 80.926(3) degrees, V = 4614.5(4) A(3), Z = 2) reveals that two mono-ruthenium substituted tungstosilicate alpha-Keggin units are connected through micro-oxo-bridging Ru-O-Ru bonds. Solution (183)W-NMR of [{SiW(11)O(39)Ru(IV)}2O](10-) resulted in six peaks (-63, -92, -110, -128, -132, and -143 ppm, intensities 2 : 2 : 1 : 2 : 2 : 2) confirming that the micro-oxo bridged dimer structure is maintained in aqueous solution. The dimerization mechanism is presumably initiated by deprotonation of the aqua-ruthenium complex [alpha-SiW(11)O(39)Ru(III)(H2O)](5-) leading to a hydroxy-ruthenium complex [alpha-SiW(11)O(39)Ru(III)(OH)](6-). Dimerization of two hydroxy-ruthenium complexes produces the micro-oxo bridged dimer [{alpha-SiW(11)O(39)Ru(III)}2O](12-) and a water molecule. The Ru(III) containing dimer is oxidized by molecular oxygen to produce a mixed valence species [{alpha-SiW(11)O(39)Ru(IV-III)}2O](11-), and further oxidation results in the Ru(IV) containing [{alpha-SiW(11)O(39)Ru(IV)}2O](10-).     

Large improvement in the catalytic activity due to small changes in the diimine ligands: new mechanistic insight into the dirhodium(II,II) complex-based photocatalytic H2 production

Two dirhodium(II) complexes, [Rh(II)(2)(μ-O(2)CCH(3))(2)(bpy)(2)](O(2)CCH(3))(2) (Rh(2)bpy(2); bpy = 2,2'-bipyridine) and [Rh(II)(2)(μ-O(2)CCH(3))(2)(phen)(2)](O(2)CCH(3))(2) (Rh(2)phen(2); phen = 1,10-phenanthroline) were synthesized, and their photocatalytic H(2) production activities were studied in multicomponent systems, containing [Ir(III)(ppy)(2)(dtbbpy)](+) (ppy = 2-phenylpyridine, dtbbpy = 4,4'-di-tert-butyl-2,2'-bipyridine) as the photosensitizer (PS) and triethylamine as the sacrificial reductant (SR). There is a more than 6-fold increase in the photocatalytic activity from Rh(2)bpy(2) to Rh(2)phen(2) just using phen in place of bpy. A turnover number as high as 2622 was obtained after 50 h of irradiation of a system containing 16.7 μM Rh(2)phen(2), 50 μM PS, and 0.6 M SR. The electrochemical, luminescence quenching, and transient absorption experiments demonstrate that Rh(I)Rh(I) is the true catalyst for the proton reduction. The real-time absorption spectra confirm that a new Rh-based species formed upon irradiation of the Rh(2)phen(2)-based multicomponent system, which exhibits an absorption centered at ～575 nm. This 575-nm intermediate may account for the much higher H(2) evolution efficiency of Rh(2)phen(2). Our work highlights the importance of N-based chelate ligands and opens a new avenue for pursuing more efficient Rh(II)(2)-based complexes in photocatalytic H(2) production application.     

Change of electrical conductivities between hydrated and dehydrated samples of honeycomb sheet structures with mixed oxidation state paddlewheel dirhodium complexes and halide ions

A series of mixed oxidation state compounds, [{Rh(2)(acam)(4)}(3)(μ(3)-X)(2)]·nH(2)O (Hacam = acetamide; X = Cl, n = 4 (1·4H(2)O); X = Br, n = 10 (2·10H(2)O); X = I, n = 10 (3·10H(2)O)) and [{Rh(2)(pram)(4)}(3)(μ(3)-X)(2)]·6H(2)O (Hpram = propionamide; X = Cl (4·6H(2)O), Br (5·6H(2)O), I (6·6H(2)O)) were synthesized and their X-ray structures were determined. In the crystal structure of all of these complexes, dirhodium complexes and halide ions construct 2-D honeycomb sheet arrangements in which the walls consist of Rh(2) units and halide ions lie at the corners. Complexes 1·4H(2)O, 4·6H(2)O, 5·6H(2)O and 6·6H(2)O have three independent Rh(2) units, in which there are two Rh(2)(5+) and one Rh(2)(4+). In these structures, the water molecules hydrogen bond to O atoms and from the N atoms of the amidate ligands. The number of hydrogen bonds from water molecules to the Rh(2)(4+) unit is greater than that to the Rh(2)(5+) units. This suggests that there exists pinning of the oxidation states by water molecules. In the structures of 2·10H(2)O and 3·10H(2)O, all of the Rh(2) units are crystallographically equivalent. In these structures, eight of the 10 water molecules form a honeycomb-like network between the {Rh(2)(acam)(4)}(3)X(2) honeycomb sheets. The former four structures show very low electrical conductivities of ca. 10(-8) S cm(-1) (room temperature, pellets) and the latter structures have the higher values of ca. 10(-4) S cm(-1). In the former complexes, improvement of the values to 10(-6) S cm(-1) was observed, caused by loss of pinning water.     

Solid state coordination chemistry of metal oxides: structural consequences of fluoride incorporation into the oxovanadium-copper-bisterpy-{O3P(CH2)nPO3}4- system, n= 1-5 (bisterpy = 2,2':4',4":2",2"'-quaterpyridyl-6', 6"-di-2-pyridine)

Hydrothermal reactions of a vanadate source, an appropriate Cu(II) source, bisterpy and an organodiphosphonate, H2O3P(CH2)nPO3H2(n= 1-5), in the presence of HF, yielded a family of materials of the type oxyfluorovanadium/copper-bisterpy/organodiphosphonate. Under similar reaction conditions, variations in diphosphonate tether length n provided the one-dimensional [{Cu2(bisterpy)}V2F2O2{HO3PCH2PO3}{O3PCH2PO3}](1) and [{Cu2(bisterpy)}V2F4O4{HO3P(CH2)2PO3H}](3), the two-dimensional [{Cu2(bisterpy)}V2F2O2(H2O)2{HO3P(CH2)2PO3}2] x 2H2O (2 x 2H2O), [{Cu2(bisterpy)(H2O2}V2F2O2{O3P(CH2)3PO3}{HO3P(CH2)3PO3H}(4) and [{Cu2(bisterpy)}V4F4O4(OH)(H2O){HO3P(CH2)5PO3}{O3P(CH2)5PO3}] x H2O (9 x H2O) and the three-dimensional [{Cu2(bisterpy)}3V8F6O17{HO3P(CH2)3PO3}4]0.8H2O (5 x 0.8H2O), [{Cu2(bisterpy)}V4F2O6{O3P(CH2)4PO3}2](8) and [{Cu2(bisterpy)(H2O)}2V8F4O8(OH)4{HO3P(CH2)5PO3H}2{O3P(CH2)5PO)}3] x 4.8H2O (10 x 4.8H2O). In addition, two members of the oxovanadium/Cu2(bisterpy)/organodiphosphonate family [{Cu2(bisterpy)}V2O4{HO3P(CH2)3PO3}2](6) and [{Cu2(bisterpy)}3V4O8(OH)2{O3P(CH2)3PO3}2{HO3P(CH2)3PO3}2] x 5H2O (7 x 5H2O) cocrystallized from the reaction mixture which provided 5. The overall architectures reveal embedded substructures based on V/P/O(F) clusters, chains, networks, and frameworks. In contrast to the oxovanadium/Cu2(bisterpy)/ organodiphosphonate family, several of the materials of this study also exhibit the direct condensation of vanadium polyhedra to produce binuclear and/or tetranuclear building units.     

Discrete Rh(III)/Fe(II) and Rh(III)/Fe(II)/Co(III) cyanide-bridged mixed valence compounds

The heterotrinuclear complexes trans- and cis-[{cis-VI-L(15)Rh(III)(μ-NC)}{trans-III-L(14S)Co(III)(μ-NC)}Fe(II)(CN)(4)](2+) are unprecedented examples of mixed valence complexes based on ferrocyanide bearing three different metal centers. These complexes have been assembled in a stepwise manner from their {trans-III-L(14S)Co(III)}, {cis-VI-L(15)Rh(III)}, and {Fe(II)(CN)(6)} building blocks. The preparative procedure follows that found for other known discrete assemblies of mixed valence dinuclear Cr(III)/Fe(II) and polynuclear Co(III)/Fe(II) complexes of the same family. A simple slow substitution process of [Fe(II)(CN)(6)](4-) on inert cis-VI-[Rh(III)L(15)(OH)](2+) leads to the preparation of the new dinuclear mixed valence complex [{cis-VI-L(15)Rh(III)(μ-NC)}Fe(II)(CN)(5)](-) with a redox reactivity that parallels that found for dinuclear complexes from the same family. The combination of this dinuclear precursor with mononuclear trans-III-[Co(III)L(14S)Cl](2+) enables a redox-assisted substitution on the transient {L(14S)Co(II)} unit to form [{cis-VI-L(15)Rh(III)(μ-NC)}{trans-III-L(14S)Co(III)(μ-NC)}Fe(II)(CN)(4)](2+). The structure of the final cis-[{cis-VI-L(15)Rh(III)(μ-NC)}{trans-III-L(14S)Co(III)(μ-NC)}Fe(II)(CN)(4)](2+) complex has been established via X-ray diffraction and fully agrees with its solution spectroscopy and electrochemistry data. The new species [{cis-VI-L(15)Rh(III)(μ-NC)}{trans-III-L(14S)Co(III)(μ-NC)}Fe(II)(CN)(4)](2+) and [{cis-VI-L(15)Rh(III)(μ-NC)}Fe(II)(CN)(5)](-) show the expected electronic spectra and electrochemical features typical of Class II mixed valence complexes. Interestingly, in the trinuclear complex, these features appear to be a simple addition of those for the Rh(III)/Fe(II) and Co(III)/Fe(II) moieties, despite the vast differences existent in the electronic spectra and electrochemical properties of the two isolated units.     

Heteroleptic silylamido phenolate complexes of calcium and the larger alkaline earth metals: β-agostic Ae⋅⋅⋅Si-H stabilization and activity in the ring-opening polymerization of L-lactide

The factors governing the stability and the reactivity towards cyclic esters of heteroleptic complexes of the large alkaline earth metals (Ae) have been probed. The synthesis and stability of a family of heteroleptic silylamido and alkoxide complexes of calcium [{LO(i)}Ca-Nu(thf)(n)] supported by mono-anionic amino ether phenolate ligands (i = 1, {LO(1)}(-) = 4-(tert-butyl)-2,6-bis(morpholinomethyl)phenolate, Nu(-) = N(SiMe(2)H)(2)(-), n = 0, 4; i = 2, {LO(2)}(-) = 2,4-di-tert-butyl-6-{[2-(methoxymethyl)pyrrolidin-1-yl]methyl}phenolate, Nu(-) = N(SiMe(2)H)(2)(-), n = 0, 5; i = 4, {LO(4)}(-) = 2-{[bis(2-methoxyethyl)amino]methyl}-4,6-di-tert-butylphenolate, Nu(-) = N(SiMe(2)H)(2)(-), n = 1, 6; Nu(-) = HC≡CCH(2)O(-), n = 0, 7) and those of the related [{LO(3)}Ae-N(SiMe(2)H)(2)] ({LO(3)}(-) = 2-[(1,4,7,10-tetraoxa-13-azacyclopentadecan-13-yl)methyl]-4,6-di-tert-butylphenolate Ae = Ca, 1; Sr, 2; Ba, 3) have been investigated. The molecular structures of 1, 2, [(4)(2)], 6, and [(7)(2)] have been determined by X-ray diffraction. These highlight Ae???H-Si internal β-agostic interactions, which play a key role in the stabilization of [{LO(i)}Ae-N(SiMe(2)H)(2)] complexes against ligand redistribution reactions, in contrast to regular [{LO(i)}Ae-N(SiMe(3))(2)]. Pulse-gradient spin-echo (PGSE) NMR measurements showed that 1, 4, 6, and 7 are monomeric in solution. Complexes 1-7 mediate the ring-opening polymerization (ROP) of L-lactide highly efficiently, converting up to 5000?equivalents of monomer at 25?°C in a controlled fashion. In the immortal ROP performed with up to 100?equivalents of exogenous 9-anthracenylmethanol or benzyl or propargyl alcohols as a transfer agent, the activity of the catalyst increased with the size of the metal (1<2<3). For Ca-based complexes, the enhanced electron-donating ability of the ancillary ligand favored catalyst activity (1>6>4≈5). The nature of the alcohol had little effect over the activity of the binary catalyst system 1/ROH; in all cases, both the control and end-group fidelity were excellent. In the living ROP of L-LA, the HC≡CCH(2)O(-) initiating group (as in 7) proved superior to N(SiMe(2)H)(2)(-) or N(SiMe(3))(2)(-) (as in 6 or [{LO(4)}Ca-N(SiMe(3))(2)] (B), respectively).     

Controlling aggregation of copper(II)-based coordination compounds: From mononuclear to dinuclear, tetranuclear, and polymeric copper complexes

The use of a strategy combining ligand design and changes of reaction conditions has been investigated with the goal of directing the assembly of mononuclear, dinuclear, tetranuclear, and polymeric copper(II) complexes. As a result, closely related copper monomers, alkoxo dimers, and hydroxo cubanes, along with a carbonate-bridged polymeric species, have been synthesized using the rigid, aliphatic amino ligands cis-3,5-diamino-trans-hydroxycyclohexane (DAHC), cis-3,5-diamino-trans-methoxycyclohexane (DAMC), and the glutaryl-linked derivative glutaric acid bis-(cis-3,5-diaminocyclohexyl) ester (GADACE). The composition of the monomeric complex has been determined by X-ray crystallography as [Cu(DAHC)2](ClO4)2 (1), the two dimers as [{Cu(DAHC)(OMe)}2](ClO4)2.MeOH (2) and [{Cu(DAMC)(OMe)(ClO4)}2] (3), the three Cu4O4 cubanes as [{Cu(DAHC)(OH)}4](ClO4)(4).2.5MeOH (4), [{Cu(DAMC)(OH)}4](ClO4)4.H2O (5), and [{Cu2(OH)2(GADACE)}2]Cl4.2MeOH.6H2O (6), and an infinite-chain structure as [{Cu(DAHC)(CO3)}n] (7). Furthermore, the cubane structures 4 and 5 have been investigated magnetically. Our studies indicate that formation of the monomeric, dimeric, and tetranuclear DAHC and DAMC complexes can be controlled by small changes in reaction conditions and that further preorganization of the ligand moiety by linking the DAHC cores (GADACE) allows more effective direction of the self-assembly of the Cu4O4 cubane core.     

Superoxo, peroxo, and hydroperoxo complexes formed from reactions of rhodium porphyrins with dioxygen: thermodynamics and kinetics

Rhodium(II) porphyrin complexes react with dioxygen to form terminal superoxo and bridged mu-peroxo complexes. Equilibrium constants for dioxygen complex formation with rhodium(II) tetramesitylporphyrin ((TMP)Rh*) and a m-xylyl-tethered dirhodium(II) diporphyrin complex (*Rh(m-xylyl)Rh*) are reported. (TMP)Rh-H reacts with oxygen to form a transient hydroperoxy complex ((TMP)Rh-OOH), which reacts on to form the rhodium(II) complex ((TMP)Rh*) and water. Kinetic studies for reactions of (TMP)Rh-H with O2 suggest a near concerted addition of dioxygen to the (TMP)Rh-H unit. Reactivity studies for mixtures of H2/O2 and CH4/O2 with the dirhodium(II) complex (*Rh(m-xylyl)Rh*) are reported.     

Oxygen reduction to water mediated by a dirhodium hydrido-chloride complex

The two-electron mixed-valence dirhodium complex Rh(2)(0,II)(tfepma)(2)(CN(t)Bu)(2)Cl(2) (tfepma = CH(3)N[P(OCH(2)CF(3))(2)](2)) reacts with HCl to furnish two isomeric dirhodium hydrido-chloride complexes, Rh(2)(II,II)(tfepma)(2)(CN(t)Bu)(2)Cl(3)H. In the presence of HCl, the hydride complex effects the reduction of 0.5 equiv of O(2) to 1 equiv of H(2)O, generating Rh(2)(II,II)(tfepma)(2)(CN(t)Bu)(2)Cl(4), which can be prepared independently by chlorine oxidation of the Rh(2)(0,II) precursor. The starting Rh(2)(0,II) complex is regenerated photochemically to close an oxygen-to-water reduction photocycle.     

Novel RhCp*/GaCp* and RhCp*/InCp* cluster complexes

The reaction of 6 equivalents of GaCp*(Cp*= pentamethylcyclopentadienyl) with [{Cp*RhCl2}2] yields the complex [Cp*Rh(GaCp*)3(Cl)2] (1) exhibting a cage-like intermetallic RhGa3 center with Ga-Cl-Ga bridges. Treatment of this complex with GaCl3 gives the Lewis acid-base adduct [Cp*Rh(GaCp*)2(GaCl3)]. (2) Reaction of [{Cp*RhCl2}2] with understoichiometric amounts of E(I)Cp*(E = Al, Ga, In) leads to a variety of products strongly dependent on the molecular ratio of the reactants. Thus, the reduction of [{Cp*RhCl2}2] with one equivalent of E(I)Cp*(E = Al, Ga, In) gives the RhII dimer [{Cp*RhCl}2]. The insertion of 3 equivalents of InCp* into the Rh-Cl bonds of [{Cp*RhCl2}2] yields the salt [Cp*2Rh]+[Cp*Rh(InCp*){In2Cl4(mu2-Cp*)}]- (3), the anion exhibiting an intermetallic RhIn(3) center with an intramolecularly bridging Cp* ring. The reaction of [{Cp*RhCl}2] with Cp*Ga yields various insertion products. In trace amount the "all hydrocarbon" cluster complex [(RhCp*)2(GaCp*)3] (6) is obtained. The corresponding ethylene containing cluster complex [{RhCp(GaCp*)(C2H4)}2] (7) can be prepared by treatment of [RhCp*(CH3CN)(C2H4)] with GaCp*.     

Structural and magnetic diversity in cyano-bridged bi- and trimetallic complexes assembled from cyanometalates and [M(rac-CTH)]n+ building blocks (CTH = d,l-5,5,7,12,12,14-hexamethyl-1,4,8,11-tetraazacyclotetradecane)

Seven new cyano-bridged heterometallic systems have been prepared by assembling [M'(rac-CTH)]n+ complexes (M' = CrIII, NiII, CuII), which have two cis available coordination positions, and [M(CN)6]3- (M = FeIII, CrIII) and [Fe(CN)2(bpy)2]+ cyanometalate building blocks. The assembled systems, which have been characterized by X-ray crystallography and magnetic investigations, are the molecular squares (meso-CTH-H2)[{Ni(rac-CTH)}2{Fe(CN)6)}2].5H2O (2) and [{Ni(rac-CTH)}2{Fe(CN)2(bpy)2}2](ClO4)4.H2O (5), the bimetallic chain [{Ni(rac-CTH)}2{Cr(CN)6)}2Ni(meso-CTH)].4H2O (3), the trimetallic chain [{Ni(rac-CTH)}2{Fe(CN)6)}2Cu(cyclam)]6H2O (4), the pentanuclear complexes [{Cu(rac-CTH}3{Fe(CN)6}2].2H2O (6) and [{Cu(rac-CTH)}3{Cr(CN)6)}2].2H2O (7), and the dinuclear complex [Cr(rac-CTH)(H2O)Fe(CN)6].2H2O (8). With the exception of 5, all compounds exhibit ferromagnetic interaction between the metal ions (JFeNi = 12.8(2) cm-1 for 2; J1FeCu= 13.8(2) cm-1 and J2FeCu= 3.9(4) cm-1 for 6; J1CrCu= 6.95(3) cm-1 and J2CrCu= 1.9(2)cm-1 for 7; JCrFe = 28.87(3) cm-1 for 8). Compound 5 exhibits the end of a transition from the high-spin to the low-spin state of the octahedral FeII ions. The bimetallic chain 3 behaves as a metamagnet with a critical field Hc = 300 G, which is associated with the occurrence of week antiferromagnetic interactions between the chains. Although the trimetallic chain 4 shows some degree of spin correlation along the chain, magnetic ordering does not occur. The sign and magnitude of the magnetic exchange interaction between CrIII and FeIII in compound 8 have been justified by DFT type calculations.     

Ring-opening polymerisation of coordination compounds: a silver(I) network with both ring and polymer components

The terpyridyl ligand 2,6-C5H3N{C(=O)N(Me)-4-C5H4N}2, 1, combined with silver(I) salts to give the complexes [Ag2(1)2][BF4]2, 2, and [{Ag3(1)2}n][CF3SO3]3n, 3; the network structure of complex contains both macrocyclic units [Ag2(mu-1)2]2+ and ring-opened polymeric units [{Ag(mu-1)}n]n+.