Preparation and application of L-cysteine-modified CdSe/CdS core/shell nanocrystals as a novel fluorescence probe for detection of nucleic acid

The water-soluble L-cysteine-modified CdSe/CdS core/shell nanocrystals (expressed as CdSe/CdS/Cys nanocrystals) have been synthesized in aqueous by using L-cysteine as stabilizer. The size, shape, component and spectral property of CdSe/CdS/Cys nanocrystals were characterized by high-resolution transmission electron microscope (HRTEM), energy dispersive X-ray fluorescence (EDX), infrared spectrum (IR) and photoluminescence (PL). The results showed that the spherical CdSe/CdS/Cys nanocrystals with an average diameter of 2.3 nm have favorable fluorescent property, theirs photostability and fluorescence intensity are enhanced greatly after overcoating with CdS. The cysteine modified on the surface of core/shell CdSe/CdS nanocrystals renders the nanocrystals water-soluble and biocompatible. Based on the fluorescence quenching of the nanocrystals in the presence of calf thymus deoxyribonucleic acid (ct-DNA), a fluorescence quenching method has been developed for the determination of ct-DNA by using the nanocrystals as a novel fluorescence probe. The pH value of the system was selected at pH 7.4, with excitation and emission wavelength at 380 and 522 nm, respectively. Under the optimal conditions, the fluorescence quenching intensity of the system is linear with the concentration of ct-DNA in the range of 0.1-3.5 microg/mL (r=0.9987). The detection limit is 0.06 microg/mL. And two synthetic samples were analyzed satisfactorily.     

聚合物-二氧化硅复合基材中CdS纳米晶的合成

本文报道在Sol-gel基材中制备由聚合物稳定的CdS纳米晶的新方法， 即通过甲基丙烯酸镉与甲基丙烯酸羟乙酯共聚合合成了含有Cd 2+的聚合物微凝胶, 在聚合物微凝胶网络中原位聚合正硅酸乙酯形成聚合物互穿的Sol-gel复合基材. 再向该聚合物/二氧化硅复合基材中通入H2S气体得到CdS纳米晶. 在聚合物网络中原位聚合正硅酸乙酯可以降低纯二氧化硅材料的脆性; 另一方面, 二氧化硅可以作为增强剂增加聚合物材料的强度. 因此, 在我们合成的聚合物/二氧化硅复合基材中制备的CdS纳米晶将具有很好的应用前景.     

Controllable synthesis of functionalized CdS nanocrystals and CdS/PMMA nanocomposite hybrids

We reported controllable synthesis of CdS nanocrystal-polymer transparent hybrids by using polymethylmethacrylate (PMMA) as a polymer matrix. In a typical run, the appropriate amounts of cadmium chloride (CdCl₂) and sodium sulfide (Na₂S) in the presence of 2-mercaptoethanol (ME) as the organic ligand are well dispersed in H₂O/DMF solution without any aggregation. From a combination of transmission electron microscopy (TEM) and a computing method of Brus’s model according UV-vis absorption spectra, the particle size of as-prepared hydroxyl-coated CdS nanocrystal was determined to be about 5 nm. Then, with the surface treatment with methacryloxypropyltrimethoxysilane (MPS), CdS-PMMA hybrids were obtained via free radical polymerization in situ. FT-IR characterization indicates the formation of robust bonding between CdS nanocrystals and the organic ligand and the formation of double-bond functional CdS nanocrystals. The TGA measurement displays CdS-PMMA hybrids possess better thermal stability compared with pure PMMA polymer. The fluorescence measurement shows that CdS nanocrystals and CdS-PMMA hybrids exhibit good optical properties. Also, the luminescent photographs taken under ultraviolet light prove the luminescence properties.     

Controlled growth and photocatalytic properties of CdS nanocrystals implanted in layered metal hydroxide matrixes

Layered double hydroxide Cd(1)(-)(x)()Al(x)()(OH)(2)(DS)(x)().3.0H(2)O (CdAlDS) and a related hydroxide salt compound Cd(2)(OH)(3)(DS).2.5H(2)O (CdDS), where DS stands for dodecyl sulfate sandwiched between two adjacent inorganic layers, have been synthesized and used as precursors for CdS nanoparticle growth. Through a gas/solid reaction, CdS nanocrystals implanted in the layer matrixes of the layered double hydroxides are grown, and the sizes of the nanocrystals vary in the range of 3-6 nm in diameter. The presence of trivalent Al cations in the layered double hydroxide can be taken advantage of to control the size of the CdS nanocrystals, and it also helps to prevent the formed nanocrystals from extraction from the solid matrixes. The nano-CdS implanted composite exhibits high photocatalytic activity for degradation of the nonbiodegradable rhodamine B under both UV and visible irradiations.     

Synthesis of nanocrystal-polymer transparent hybrids via polyurethane matrix grafted onto functionalized CdS nanocrystals

We reported the first synthesis of CdS nanocrystal-polymer transparent hybrids by using polyurethane (PU) grafted onto quantum dots (QDs) CdS nanocrystals. In a typical run, the appropriate amounts of cadmium chloride (CdCl2) and sodium sulfide (Na2S) in the presence of 2-mercaptoethanol (ME) as the organic ligand are well dispersed in H2O/DMF solution without any aggregation. From a combination of transmission electron microscopy (TEM) and a computing method of Brus's model according to UV-vis absorption spectra, the particle size of as-prepared hydroxyl-coated CdS nanocrystals is about 5 nm. Then, PU-CdS transparent nanocomposites hybrids were synthesized by a two-step reaction. The effect of the different ratios of ME/Cd2+ and H2O/DMF on the resulting particle size of CdS nanocrystals was investigated by UV-vis absorption measurements. FT-IR and TGA characterizations indicate the formation of robust bonding between CdS nanocrystals and the organic ligand. The fluorescence measurement shows that CdS-PU hybrids exhibit good optical properties.     

Generalized and facile synthesis of semiconducting metal sulfide nanocrystals

We report on the synthesis of semiconductor nanocrystals of PbS, ZnS, CdS, and MnS through a facile and inexpensive synthetic process. Metal-oleylamine complexes, which were obtained from the reaction of metal chloride and oleylamine, were mixed with sulfur. The reaction mixture was heated under appropriate experimental conditions to produce metal sulfide nanocrystals. Uniform cube-shaped PbS nanocrystals with particle sizes of 6, 8, 9, and 13 nm were synthesized. The particle size was controlled by changing the relative amount of PbCl(2) and sulfur. Uniform 11 nm sized spherical ZnS nanocrystals were synthesized from the reaction of zinc chloride and sulfur, followed by one cycle of size-selective precipitation. CdS nanocrystals that consist of rods, bipods, and tripods were synthesized from a reaction mixture containing a 1:6 molar ratio of cadmium to sulfur. Spherical CdS nanocrystals (5.1 nm sized) were obtained from a reaction mixture with a cadmium to sulfur molar ratio of 2:1. MnS nanocrystals with various sizes and shapes were synthesized from the reaction of MnCl(2) and sulfur in oleylamine. Rod-shaped MnS nanocrystals with an average size of 20 nm (thickness) x 37 nm (length) were synthesized from a 1:1 molar ratio of MnCl(2) and sulfur at 240 degrees C. Novel bullet-shaped MnS nanocrystals with an average size of 17 nm (thickness) x 44 nm (length) were synthesized from the reaction of 4 mmol of MnCl(2) and 2 mmol of sulfur at 280 degrees C for 2 h. Shorter bullet-shaped MnS nanocrystals were synthesized from a 3:1 molar ratio of MnCl(2) and sulfur. Hexagon-shaped MnS nanocrystals were also obtained. All of the synthesized nanocrystals were highly crystalline.     

CdS纳米晶与多肽分子相互作用研究

研究了半导体CdS纳米晶的表面功能化及荧光光谱特性, 并利用静电/配位自组装方法实现了多肽和CdS纳米晶的生物无机偶联, 研究了纳米晶多肽偶联体系的荧光光谱以及多肽与CdS纳米晶之间的相互作用. 结果表明: 含巯基多肽对CdS纳米晶表面形成完善包覆, 消除CdS纳米晶表面缺陷, 使CdS纳米晶荧光增强; 含端氨基多肽使CdS纳米晶荧光出现先升后降趋势; 其余不含巯基和氨基的多肽均猝灭CdS纳米晶荧光, 猝灭机制属于形成化合物所引起的静态猝灭, 它们的结合常数约为2×10⁴, 结合位点数约为0.87～1.00.     

Role of dopant concentration and surface coating on photophysical properties of CdS: Eu3+ nanocrystals

Here, we report the role of dopant concentration and surface coating of CdS: Eu3+ nanocrystals on the modification of crystal structure and their photoluminescence properties by steady-state and time resolved fluorescence studies. It is found that photoluminescence properties are sensitive to the crystal structure which is controlled by surface coating and dopant concentration. The emission intensity of the peak at 614 nm (5D0 --> 7F2) of the Eu3+-ions is found to be sensitive to the doping and surface coating of CdS nanocrystals. It is found that the average decay times tau are 248, 353 and 499 micros for 0.25, 0.5 and 1.0 mol% Eu ions doped into CdS nanocrystals, respectively. From the decay time measurements, it is evident that the energy transfer occurs from CdS nanoparticles to Eu3+ ions and the calculated energy transfer efficiency from CdS nanoparticles to Eu3+ ions is 9.2 and 35% for Eu3+ ions coated and doped CdS nanoparticles, respectively. Our analysis suggests that site symmetry of ions plays a very important role in the modifications of radiative and nonradiative relaxation mechanisms.     

Studies of the isomerization and photophysical properties of a novel 2,2':6',2'-terpyridine-based ligand and its complexes

A novel 2,2':6',2'-terpyridine-based ligand L and its complexes [ML(2)](ClO(4))(2)·CH(2)Cl(2) (M = Cd 1, Zn 2, Cu 4, Mn 5), [CoL(2)](ClO(4))(2)3, CdLI(2)6 and CdL(SCN)(2)7 were synthesized and fully characterized. The crystal structures of 1-6 were solved by single crystal X-ray diffraction analysis. The linear absorption and emission properties, and third-order nonlinear optical (NLO) properties of all the complexes were systematically investigated. The equilibrium of the trans- and cis- isomers of L was studied both experimentally and theoretically. The configurations and photophysical properties of the complexes display a large dependence on the choice of metal ions and anions.     

有机硫源溶剂热法合成CdS纳米晶体

以二硫化四甲基秋兰姆((TMTD)作为有机硫源,分别在苯、水-苯溶剂中于不同温度、不同时间溶剂热法合成了CdS纳米晶体。采用FE-SEM、XRD和FTIR对晶体的结构和成形机理进行了研究。结果表明,溶剂热温度比反应时间对晶体形貌的形成影响更大。CdS纳米晶体是立方与六角的混合晶型。此外,溶剂的种类也是影响CdS纳米晶体结构和成形的重要因素,并且对花形CdS纳米晶体进行了阴极发光(CL)光谱的研究。     

Synthesis,Crystal Structure,and Spectral Properties of a Novel Co(II) Complex Containing Imidazole Derivative

1 INTRODUCTION The metal-organic frameworks constructed from metals and π-conjugated ligands might have poten- tial applications in various fields, such as electronic, optical or magnetic materials[1～3]. Therefore, this kind of complex has attracted the increasing atten- tion of chemists, and considerable efforts have been devoted to the rational design and synthesis of new materials[4, 5]. Moreover, the organic-inorganic hybri- dized coordination complexes with imidazole deri- vatives …     

离子交换膜中CdS单分散纳米晶的合成及其光学性质

以硫代乙酰胺(TAA)为前驱体, 采用液相反应在全氟磺酸离子交换膜(Nafion)中自组装得到了均匀分布、单分散的纳米CdS晶体；与文献报道的前驱体如Na₂S和H₂S不同, TAA可以在全氟磺酸离子膜中均匀扩散, 最终在Nafion薄膜中得到均匀分布的纳米CdS晶体. 利用高分辨电子显微镜(HRTEM)、X射线衍射仪(XRD)和能量散射X射线分析(EDXA)研究了Nafion薄膜模板中CdS纳米晶体的形成机理、晶粒大小和分布；采用紫外- 可见吸收光谱和荧光光谱分析了Nafion薄膜中单分散纳米CdS晶体的光学性质. 结果表明, 随CdS纳米晶体尺寸的减小, 量子尺寸效应明显增强；在紫外吸收谱中表现为吸收边明显蓝移, 而在光致发光谱中, 表现为带边发射的蓝移.     

CuInS2/CdS基掺杂纳米晶的晶体结构、光谱性质及性能调控研究

多功能纳米晶的制备、性能及其应用是材料、化学、能源、生物医学等领域十分关注的课题之一。基于掺杂调控纳米晶生长和性能的思想,发展了纳米晶修饰和复合的概念和技术,使用绿色安全的化学溶液法结合外延生长技术合成了巯基丙酸(MPA)包覆的掺杂CuInS₂/CdS基纳米晶材料。通过适当调整掺杂异价离子的种类,实现了对CuInS₂/CdS基纳米晶显微结构和性能的调控,获得了具有特定相结构、组分、尺度和光学性能(吸收性质、光学带隙、发光强度)的纳米晶。存在于基质晶体中不同金属掺杂离子,会造成半导体的禁带中间产生掺杂能级,导致二次跃迁,进而产物体现出不同的禁带宽度。掺杂Co ²⁺、Fe ²⁺、Er ³⁺离子的CuInS₂/CdS纳米晶光致发光(PL)峰强度降低明显,这是由于Co ²⁺、Fe ²⁺、Er ³⁺离子掺杂有效地抑制了空穴-电子对的复合,降低了纳米晶的光生电子-空穴复合几率,使得其光催化活性得到增强。这些半导体纳米材料在光催化、能量转换与储存方面具有良好的应用潜力。     

CdS纳米晶@碳点复合物膜的电致化学发光

采用热解柠檬酸法制备碳点(CDs),并将之与表面无包裹剂的CdS纳米晶(CdS NCs)超声复合制备CdS纳米晶@碳点(CdS NCs@CDs)复合物。研究了复合物膜阴极电致化学发光(ECL),探讨了CDs对CdS纳米晶膜ECL增强的机理。CDs分散性良好、尺寸在1.5~4 nm之间;与粒径约为4 nm的CdS纳米晶按体积比2∶3复合后,在360 nm光激发下复合物具有最强的荧光发射且表现为CDs的荧光。同时,复合物膜产生归属于激发态CdS纳米晶的最强的ECL发射,且ECL发光峰起置电势正移至-1.05 V。复合物膜的ECL发射是pH依赖的,在pH值为6时,复合物膜具有最大的ECL强度,为CdS纳米晶膜ECL强度的19倍。这种ECL增强源于CDs能束缚大量电子产生局域电场从而促进近邻CdS纳米晶激发态的形成与弛豫。     

Bacterial biosynthesis of cadmium sulfide nanocrystals

Semiconductor nanocrystals, which have unique optical and electronic properties, have potential for applications in the emerging field of nanoelectronics. To produce nanocrystals cheaply and efficiently, biological methods of synthesis are being explored. We found that E. coli, when incubated with cadmium chloride and sodium sulfide, have the capacity to synthesize intracellular cadmium sulfide (CdS) nanocrystals. The nanocrystals are composed of a wurtzite crystal phase with a size distribution of 2-5 nm. Nanocrystal biosynthesis increased about 20-fold in E. coli cells grown to stationary phase compared to late logarithmic phase. Our results highlight how different genetic and physiological parameters can enhance the formation of nanocrystals within bacterial cells.     

Water-soluble CdSe and CdSe/CdS nanocrystals: a greener synthetic route

We report a new green synthetic route of CdSe and core-shell CdSe/CdS nanoparticles (NPs) in aqueous solutions. This route is performed under water-bath temperature, using Se powder as a selenium source to prepare CdSe NPs, and H(2)S generated by the reaction of Na(2)SH(2)SO(4) as a sulfur source to synthesize core-shell CdSe/CdS NPs at 25-35 degrees C. The synthesis time of every step is only 20 min. After illumination with ambient natural light, photoluminescence (PL) intensities of CdSe NPs enhanced up to 100 times. The core-shell CdSe/CdS NPs have stronger photoactive luminescence with quantum yields over 20%. The obtained CdSe NPs exhibit a favorable narrow PL band (FWHM: 50-37 nm) with increasing molar ratio of Cd/Se from 4:1 to 10:1 at pH 9.1 in the crude solution, whereas PL band of corresponding CdSe/CdS NPs is slightly narrower. The emission maxima of nanocrystals can be tuned in a wider range from 492 to 592 nm in water by changing synthesis temperature of CdSe core than those reported previously. The resulting new route is of particular interest as it uses readily-available reagents and simple equipment to synthesize high-quality water-soluble CdSe and CdSe/CdS nanocrystals.     

The influence of oxygen on the fluorescence enhancement of fatty-acid-capped CdS nanocrystals

CdS nanocrystals were synthesized in 1-octadecene (ODE) solution with oleic acid (OA) as a capping agent. Freshly prepared CdS nanocrystals showed a weak orangelike fluorescence due to defects on the particle surface. After several weeks' storage, the bulk fluorescence of CdS nanocrystals was dramatically enhanced, which gave the nanocrystals a blue or violet appearance. UV and photoluminescence (PL) measurements were employed to investigate this process. It has been found that the oxygen in the air played the most important role. The oxygen atoms could absorb on the surface of particles and a layer of oxide was gradually formed, which effectively passivated the surface of CdS nanocrystals. Interestingly, this oxidative process had no relation to UV illumination.     

Syntheses and properties of emissive iridium(III) complexes with tridentate benzimidazole derivatives

A series of novel emissive Ir(III) complexes having the coordination environments of [Ir(N--N--N)2]3+, [Ir(N--N--N)(N--N)Cl]2+, and [Ir(N--N--N)(N--C--N)]2+ with 2,6-bis(1-methyl-benzimidazol-2-yl)pyridine (L1, N--N--N), 1,3-bis(1-methyl-benzimidazol-2-yl)benzene (L2H, N--C--N), 4'-(4-methylphenyl)-2,2':6',2' '-terpyridine (ttpy, N--N--N), and 2,2'-bipyridine (bpy, N--N) have been synthesized and their photophysical and electrochemical properties studied. The Ir(III) complexes exhibited phosphorescent emissions in the 500-600 nm region, with lifetimes ranging from approximately 1-10 micros at 295 K. Analysis of the 0-0 energies and the redox potentials indicated that the lowest excited state of [Ir(L1)(L2)]2+ possessed the highest contribution of 3MLCT (MLCT = metal-to-ligand charge transfer) among the Ir(III) complexes, reflecting the sigma-donating ability of the tridentate ligand, ttpy < L1 < L2. The emission quantum yields (phi) of the Ir(III) complexes ranged from 0.037 to 0.19, and the highest phi value (0.19) was obtained for [Ir(L1)(bpy)Cl]2+. Radiative rate constants (k(r)) were 1.2 x 10(4) s(-1) for [Ir(ttpy)2]3+, 3.7 x 10(4) s(-1) for [Ir(L1)(bpy)Cl]2+, 3.8 x 10(4) s(-1) for [Ir(ttpy)(bpy)Cl]2+, 3.9 x 10(4) s(-1) for [Ir(L1)2]3+, and 6.6 x 10(4) s(-1) for [Ir(L1)(L2)]2+. The highest radiative rate for [Ir(L1)(L2)]2+ with the highest contribution of 3MLCT could be explained in terms of the singlet-triplet mixing induced by spin-orbit coupling of 5d electrons in the MLCT electronic configurations.     

Novel single-crystal-to-single-crystal anion exchange and self-assembly of luminescent d(10) metal (Cd(II), Zn(II), and Cu(I)) complexes containing C(3)-symmetrical ligands

Ligands L1 and L2' (L1=N,N',N'-tris(4-pyridyl)trimesic amide, L2'=N,N',N'-tris(3-pyridinyl)-1,3,5-benzenetricarboxamide) belonging to an interesting family of tripyridyltriamides with C(3)-symmetry have been utilized to construct 3D porous or hydrogen-bonded frameworks. Through a novel single-crystal-to-single-crystal anion-exchange process, [Cd(L1)(2)(ClO(4))(2)](n) (1c) can be obtained from [Cd(L1)(2)Cl(2)](n) (1b) in the presence of ClO(4)(-) anions. This anion-exchange process is highly selective and only the substitution of Cl(-) by ClO(4)(-) or PF(6)(-) could be realized; Cl(-) was found not to be substituted by BPh(4)(-). This demonstrates that the exchange process depends on the size of the anions in relation to the size of the cavities in the host material (ca. 7.5 A). In addition, the anion-exchange properties of 1 b have also been investigated by means of powder X-ray diffraction (PXRD), elemental analysis (EA), and infrared absorption spectroscopy (IR). Structurally, [Zn(L1)(NO(3))(2)](n)(2) consists of a 2D coordination network with five-coordinate Zn(II) ions. Surprisingly, different trigonal-bipyramidal Zn(II) ions propagate to form distinct respective sheet structures, A and B, which are packed in an A-B-A-B manner in the crystal lattice, and these are hydrogen-bonded to give a 3D extended framework. The molecular structure of [CuI(L2')](n)(3) shows that the Cu(I) ion adopts a distorted tetrahedral geometry, and 3 also forms a 2D coordination network. Significantly, this 2D coordination network is further assembled into a remarkable 3D homochiral framework through triple hydrogen bonding and pi...pi interactions. All of these 3D coordination polymers and/or hydrogen-bonded frameworks are luminescent in the solid state, and their solid-state luminescent properties have been investigated at room temperature and/or at 77 K.     

Highly luminescent, stable, and water-soluble CdSe/CdS core-shell dendron nanocrystals with carboxylate anchoring groups

A dendron ligand with two carboxylate anchoring groups at its focal point and eight hydroxyl groups as its terminal groups was found to efficiently convert as-synthesized CdSe/CdS core-shell nanocrystals in toluene to water-soluble dendron-ligand stabilized nanocrystals (dendron nanocrystals). The resulting dendron nanocrystals retained 60% of the photoluminescence value of the original CdSe/CdS core-shell nanocrystals in toluene and were significantly brighter than the similar dendron nanocrystals with thiolate (deprotonated thiol group) as the anchoring group which retained just 10% of the photoluminescence value of the original CdSe/CdS core-shell nanocrystals in toluene. The carboxylate-based dendron nanocrystals survived UV irradiation in air for at least 13 days, about 9 times better than the thiolate-based dendron nanocrystals (35 h) and similar to that of the thiolate-based dendron-box stabilized CdSe/CdS core-shell nanocrystals (box nanocrystals). Upon UV irradiation, the dendron nanocrystals became even 2 times brighter than the original CdSe/CdS core-shell nanocrystals in toluene, and the UV-brightened PL can retain the brightness for at least several months. These stable and bright dendron nanocrystals were soluble in various aqueous media, including all common biological buffer solutions tested, for at least 1.5 years. In addition to their superior performance, the synthetic chemistry of carboxylate dendron ligands and the corresponding dendron nanocrystals is relatively simple and with high yield.