Effect of wall aperture on sound propagation within a tube

I.IntroductionInmanycasesthecontinuityofsoundpropagationwithinatubeisbrokenbyaperturesonthetubewallsuchastoneholesonthemainboreofwoodwindmusicalinstruments,rectangularsound-windowofChineseinstrumentshengetc.Thediscontinuityhaseffectonwavccncoun-tCringit.Keefestudicdasing1etoneholeofwoodwindinstrumentandrepresenteditbyaT-sectionequiva1entcirc.it[11.Inthispaper,theapertureontubewa1lisstudiedfromdifferentpointofview,a1thoughtheGreen'sfunctionmethodisalsousedinthetheoreticalana1ysis.Moresimp1er…     

Flat polymeric microlens array

A polymer-based flat microlens array is demonstrated. Within each pixel of the array, the polymer presents a circular central-symmetric inhomogeneous orientation. Pixel with such a structure behaves a lens-like character. A suitable amount of liquid crystal mixed in the polymer host can improve not only the lens flexibility but also the lens performance. Moreover, the polymer-based microlens array has the advantages of real planar surface, ultra-thin thickness, and can be designed with any aperture size.     

Sound radiation from an aperture in a rectangular enclosure under low modal conditions

This paper investigates both theoretically and experimentally the sound radiation from an aperture placed in an enclosure wall for the particular case of low modal sound field. The incidence field is composed of the enclosed sound field, which is calculated using the theoretical modal model presented. The transmitted sound is calculated by the Rayleigh radiation equation after continuity conditions have been applied in the aperture plane, assuming the condition of a thin wall. The model is experimentally validated by measuring the directivity and sound pressure radiated from an aperture in the side of a rectangular box. Because the walls of the enclosure are not rigid, an experimental procedure to determine its admittance is also presented. The experiments have been carried out for the first four modes of the enclosed sound field, and good agreement is found between the theoretical and experimental results. These results indicate that the admittance of the aperture, its radiation efficiency, and its directivity are all functions of the predominant mode shape, and the frequency, as well as the location and shape, of the aperture relative to the predominant enclosed mode shape.     

A high-resolution and intelligent dead pixel detection scheme for an electrowetting display screen

Electrowetting display technology is realized by tuning the surface energy of a hydrophobic surface by applying a voltage based on electrowetting mechanism. With the rapid development of the electrowetting industry, how to analyze efficiently the quality of an electrowetting display screen has a very important significance. There are two kinds of dead pixels on the electrowetting display screen. One is that the oil of pixel cannot completely cover the display area. The other is that indium tin oxide semiconductor wire connecting pixel and foil was burned. In this paper, we propose a high-resolution and intelligent dead pixel detection scheme for an electrowetting display screen. First, we built an aperture ratio–capacitance model based on the electrical characteristics of electrowetting display. A field-programmable gate array is used as the integrated logic hub of the system for a highly reliable and efficient control of the circuit. Dead pixels can be detected and displayed on a PC-based 2D graphical interface in real time. The proposed dead pixel detection scheme reported in this work has promise in automating electrowetting display experiments.     

轻量化超宽温度折/衍混合红外热像仪光学系统设计

设计一个用于红外热像仪的轻量化超宽温中波折/衍混合红外热像仪光学系统。光学系统参数:工作波段为3.7 m～4.8 m,相对孔径为1/2,焦距为120 mm,全视场角为5.18,满足100 %冷光栏效率。采用三片式结构,使用硅和锗两种常用的红外材料,以及一个非球面和一个衍射面,系统实现了轻量化和超宽温度下工作。系统在-60℃～160℃温度范围内成像质量接近衍射极限,可供像元尺寸为30 m、像元数256256的凝视型中波红外探测器使用,可探测到2.3 km远的坦克目标。     

Instabilities of thermocapillary-buoyancy convection in open rectangular liquid layers

This article presents the experimental investigation on instabilities of thermocapillary-buoyancy convection in the transition process in an open rectangular liquid layer subject to a horizontal temperature gradient. In the experimental run,an infrared thermal imaging system was constructed to observe and record the surface wave of the rectangular liquid layer. It was found that there are distinct convection longitudinal rolls in the flow field in the thermocapillary-buoyancy convection transition process. There are different wave characterizations for liquid layers with different thicknesses. For sufficiently thin layers, oblique hydrothermal waves are observed, which was predicted by the linear-stability analysis of Smith Davis in 1983. For thicker layers, the surface flow is distinct and intensified, which is because the buoyancy convection plays a dominant role and bulk fluid flow from hot wall to cold wall in the free surface of liquid layers. In addition, the spatiotemporal evolution analysis has been carried out to conclude the rule of the temperature field destabilization in the transition process.     

采用大口径投影光学系统监测远场散斑特征参数

大口径投影光学系统采用低成本、大口径菲涅耳透镜制作,可将远场散斑强度分布投影到CCD成像探测器上。通过CCD图像处理,能够对给定孔径上的接收功率、闪烁指数进行量化评估;在接收孔径足够大、保障散斑不会因为光束漂移效应而脱离菲涅耳透镜的条件下,该系统还可以对光束漂移和特征半径进行量化评估。同时讨论了CCD像元响应非均匀性误差及其影响、CCD辐照响应函数和图像几何投影系数的定标方法。实验表明,系统能够对激光大气传输过程中的远场散斑特征参数进行监测。特别对自由空间激光通信系统而言,可以为大气衰减和多种大气湍流效应综合作用下的中值电平慢衰落研究和检测阈值优化设计提供实验数据支撑。     

基于多点可调支撑Ф300 mm平面重力变形校正研究

在高精度光学元件领域,特别是大口径的平面光学元件,随着对测试精度和口径要求的提高,重力变形成为其不可避免的问题。介绍了立式斐索型干涉仪的系统设计和多点可调支撑方法的变形理论,通过有限元分析（FEM）,优化得到了合理的支撑结构。采用液面基准,在300 mm口径的立式斐索型干涉仪上进行了平面的重力变形校正。与三平面法检测结果比较,两者的残差峰谷（PV）值为10.20 nm,均方根（RMS）值为1.56 nm。     

基于互信息的高动态范围成像系统成像质量分析

为了优化高动态范围成像系统的设计,完善地评价系统性能,将信息论应用于高动态范围成像系统中,把高动态范围成像系统看作通信系统,采用端到端的互信息量来评价高动态范围成像系统的成像质量.在COMS采样成像模型的基础上引入空间光调制器反射式硅基液晶的影响,建立了基于互信息的高动态范围成像系统数学模型.利用该模型分析了反射式硅基液晶与CMOS阵列像素数比、像素开口率、相对平移、相对旋转对系统互信息量的影响及造成系统成像质量下降的原因.通过仿真计算,分别得到了像素数比例、像素开口率大小、相对平移量、相对旋转角度与互信息量的相互关系曲线,并定量分析了这些因素变化对系统互信息量的影响程度.仿真结果表明反射式硅基液晶和COMS阵列的最佳匹配条件是：反射式硅基液晶和CMOS像素的占空比尽可能大,CMOS像素尺寸尽可能小,避免相对平移和相对旋转,反射式硅基液晶像素数和CMOS像素数之比为1:1.     

High-resolution digital transmission microscopy—a Fourier holography approach

A spherical reference field is used to construct a digital holographic system with a demonstrated resolution up to 228 line pairs per mm. The reference field originates from a GRIN lens placed 1 mm from the illuminated object. This allows the use of a standard sensor to record the hologram with the required numerical aperture. The image is determined by evaluation of the Rayleigh–Sommerfeld diffraction integral that relates the object field in the image plane to the object field in the sensor plane. Experimental results are given for two charge coupled device sensors and one complementary metal-oxide-semiconductor active pixel sensor.     

大口径精密表面疵病的数字化检测系统

 根据散射光成像原理,采用大小两个视场来获取不同精度的暗背景下的亮疵病图像,设计了完整的数字化表面疵病检测系统。该系统采用多区域自适应阈值分割算法对图像进行分割,然后采用基于等价归并标记方法快速提取疵病的特征参数,最后利用BP神经网络对疵病进行分类。实验结果表明该方法既满足实时性需求,又取得了较好的分类检测效果。     

高分辨率中红外温度自适应夜视成像系统

针对现代最先进的像元尺寸为15 m、像元数640480的中红外焦平面大面阵探测器,设计了一种全球面轻小型高分辨率温度自适应夜视成像系统,系统工作波段为3~5 m,全视场角为8.58,相对孔径为1/2,焦距为80 mm,四片式结构,使用锗、硒化锌和硅三种材料,系统采用全球面结构,避免了以往该种系统中使用衍射面或非球面,大大降低了加工检测难度且成本低。设计结果表明,该高分辨率温度自适应夜视成像系统具有结构简单、体积小、分辨率高、成像质量高等特点,满足设计要求,可用于机载光电探测和跟踪系统。     

Ionization mechanism in a liquid-metal ion source. Source for high-melting metals

Investigations have been made of the ionization mechanism in a liquid-metal ion source. At the instant of ion current generation the surface of a liquid metal emitter frozen in a highvoltage field exhibits microprotrusions pulled from the liquid metal by the electric field. A double-focusing mass spectrometer identified two components in the ion beam extracted from the aperture in the extractor. One ion component forms at the tip of the emitter and has an energy spread not exceeding a few tens of electronvolts. The other ion component forms in the cathode plasma at the extractor. On the basis of these investigations, a mechanism is proposed for ion formation in a liquid metal ion source and this mechanism is used to produce a modified source design. The source can produce ion beams from high-melting metals and nonmetals, and beams of Ta, W, Mo, C, and Fe ions were obtained. Zh. Tekh. Fiz. 67, 82–87 (November 1997)     

红外折衍混合摄远光学系统无热化设计

为了提高远距离红外目标的探测能力,针对640 pixel×512 pixel红外CCD探测器,分析温度变化对光学系统的影响,设计出一种波长范围为8 μm~12 μm红外摄远物镜。系统采用折衍混合结构形式,焦距为200 mm,相对孔径为1:2.2,视场角为7°,具有体积小,结构紧凑的优点。仅使用硫化锌、硒化锌和锗3种材料以及4片透镜实现了无热化设计。应用Zemax对设计结果进行像质评价,在-40 ℃~+60 ℃工作温度范围内,截止频率为17 lp/mm时各视场调制传递函数值超过0.4,达到衍射极限,像面稳定,80%的能量集中在1个像元内,满足光学系统的设计要求。     

Higher mode sound transmission from a point source through a rectangular aperture

This paper considers the higher-order scattered and transmitted wave fields that result when an acoustic wave from a point source impinges at an arbitrary angle on a rectangular aperture in a rigid, thick wall. In this analysis, it is assumed that free field conditions exist on both sides of the aperture. Although the full scattered and transmitted pressure fields contain both modal sum and modal coupling effects, the modal coupling effects of the higher-order modes are ignored such that an approximate analytical solution to the uncoupled analysis can be utilized. Experiments have been undertaken to measure the sound pressure levels in the transmitted field that result when sound from a point source impinges on the opposite side of a rectangular aperture. Measurements were made with the source located at the required position to drive a particular in-aperture higher-order mode. The source was also located at positions that did not directly excite any in-aperture higher-order mode at a cut-on frequency. These results indicate that the approximate analysis developed here gives accurate solutions whether or not any mode of the aperture is driven at cut-on. Thus, the method can be used for any relative location of a source from a rectangular aperture of any dimensions.     

微投影广角镜头设计

为了满足国内外视场投影仪微型轻量化的趋势,设计一款适用于德州仪器推出的1.19 cm (0.47 英寸)、1080 pix数字微反射镜片的微型广角投影镜头。镜头由7片玻璃（均为国内常见玻璃）和2片塑料（4面非球面）透镜组成,结构简单,易加工。透射比0.66:1,即在600 mm处投影出111.76 cm(44 英寸)的画面,镜头有效焦距6.45 mm,F#:2.1,全视场86,系统总长46 mm,最大口径22 mm,在空间极限频率93 lp/mm处0.8视场以内传递函数值都超过0.62,边缘视场的传递函数值超过0.43,全视场畸变小于等于2%,垂直色差小于等于0.18 m。     

Experimental Research on Focusing Property of Radially Polarized Beam Based on Solid Immersion Lens

Realization of a near-field optical virtual probe based on an evanescent Bessel beam is strongly dependent on a radially polarized beam; this makes it essential to study the focusing property of the beam. In this paper, two experimental setups based on a fiber device and a liquid crystal device, respectively, are built to generate a radially polarized beam. This beam and an annular radially polarized beam are focused by means of a high numerical aperture objective and a solid immersion lens (SIL). Near-field distribution of the focus spot, the evanescent Bessel field, is experimentally measured with a scanning near-field optical microscope (SNOM). The full width at half maximum (FWHM) of the central peak of the evanescent Bessel field is about 200 nm in the close vicinity of the bottom surface of SIL. This has potential for use as a near-field optical virtual probe.     

应用于低折射率样品检测的SERS活性液芯光纤

用纳米组装方法在空心光纤内壁修饰SERS活性基底构成内壁具有表面增强拉曼光谱活性层的液芯光纤。激发光由光纤壁横截面入射,并在光纤壁中传播。由于光纤壁的折射率大于检测样品溶液的折射率,使得激发光在光纤壁中发生全反射,并在消逝场下穿透修饰层,激发样品拉曼散射。本方法融合了表面增强拉曼光谱技术与液芯光纤技术的优势,可成为应用于低折射样品溶液体系检测的又一手段。     

水基磁性液体的场诱导光衍射特性的研究

设计了一套用于研究磁性液体的场诱导静态和动态光衍射特性的实验装置.通过在样品的后方放置一个适当孔径的光阑,实现了定量研究其衍射特性的目的.采用沿衍射方向移动光阑的方法定量地研究了衍射光的空间分布.设计了一个指数衰减函数用来拟合动态衍射实验的数据,获得动态衍射的特征时间.以两种不同浓度的表面包覆型水基氧化铁磁性液体样品为例,定量地实验研究了其场诱导光衍射特性与外磁场强度和样品浓度的关系.结果表明,磁性液体的场诱导结构对光的静态和动态衍射与外磁场的强度和磁性液体的浓度有关.其静态衍射与外磁场强度呈非单调的关系|其动态衍射的特征时间与外磁场的强度成反比,与磁性液体的浓度成正比.对实验中观察到的场诱导静态和动态衍射特性的物理机理进行了详细的分析.     

远距离成像汽车平视显示光路结构设计

针对汽车AR-HUD显示虚像视距更远、虚像视场角更大的需求,采用自由曲面离轴反射光路结构,设计了一种焦距为-309 mm,虚像视距为7.5 m,虚像视场角为9.8°×5.5°的虚像显示光路。为保证驾驶员观察到的虚像的清晰度,结合人眼典型分辨角为1′,源图像显示模块采用分辨率为854×480 pixel的背投式DLP微投影系统。将人眼与虚像显示光路作为整体进行设计,使用Eyebox(孔径光阑偏移范围)模拟驾驶员眼睛活动范围,对于不同的孔径光阑位置,该光学系统的虚像面在奈奎斯特空间频率0.33 lp/mm处,中心视场MTF值大于0.6,全视场MTF值大于0.3。此外,使用蒙特卡罗方法对该系统取不同入瞳位置时进行了初步公差分析,系统90%的MTF值大于0.49,表明该系统容差能力较强。